USB: EHCI: keep better track of resuming ports

The ehci-hcd driver isn't as careful as it should be about the way it
uses ehci->resuming_ports.  One of the omissions was fixed recently by
commit 47a64a13d54 (USB: EHCI: Fix resume signalling on remote
wakeup), but there are other places that need attention:

	When a port's suspend feature is explicitly cleared, the
	corresponding bit in resuming_ports should be set and the core
	should be notified about the port resume.

	We don't need to clear a resuming_ports bit when a reset
	completes.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 2 insertions, 1 deletions

diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 6dce37555c4f..6d0e59306ed9 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -801,6 +801,8 @@ static int ehci_hub_control (
                         ehci_writel(ehci, temp | PORT_RESUME, status_reg);
                         ehci->reset_done[wIndex] = jiffies
                                         + msecs_to_jiffies(20);
+                        set_bit(wIndex, &ehci->resuming_ports);
+                        usb_hcd_start_port_resume(&hcd->self, wIndex);
                         break;
                 case USB_PORT_FEAT_C_SUSPEND:
                         clear_bit(wIndex, &ehci->port_c_suspend);
@@ -911,7 +913,6 @@ static int ehci_hub_control (
                                         ehci->reset_done[wIndex])) {
                         status |= USB_PORT_STAT_C_RESET << 16;
                         ehci->reset_done [wIndex] = 0;
-                        clear_bit(wIndex, &ehci->resuming_ports);
 
                         /* force reset to complete */
                         ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),