aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/langwell_udc.c
diff options
context:
space:
mode:
authorXiaochen Shen <xiaochen.shen@intel.com>2009-06-04 03:34:49 -0400
committerGreg Kroah-Hartman <gregkh@suse.de>2009-06-16 00:44:47 -0400
commit5be19a9daa2df2507adf5b4676a7db8d131cf56e (patch)
tree8fe299eff424d82c6f733efe8804425dce232ab0 /drivers/usb/gadget/langwell_udc.c
parentf9c99bb8b3a1ec81af68d484a551307326c2e933 (diff)
USB: Add Intel Langwell USB Device Controller driver
Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/gadget/langwell_udc.c')
-rw-r--r--drivers/usb/gadget/langwell_udc.c3373
1 files changed, 3373 insertions, 0 deletions
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
new file mode 100644
index 000000000000..6829d5961359
--- /dev/null
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -0,0 +1,3373 @@
1/*
2 * Intel Langwell USB Device Controller driver
3 * Copyright (C) 2008-2009, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
17 *
18 */
19
20
21/* #undef DEBUG */
22/* #undef VERBOSE */
23
24#if defined(CONFIG_USB_LANGWELL_OTG)
25#define OTG_TRANSCEIVER
26#endif
27
28
29#include <linux/module.h>
30#include <linux/pci.h>
31#include <linux/dma-mapping.h>
32#include <linux/kernel.h>
33#include <linux/delay.h>
34#include <linux/ioport.h>
35#include <linux/sched.h>
36#include <linux/slab.h>
37#include <linux/smp_lock.h>
38#include <linux/errno.h>
39#include <linux/init.h>
40#include <linux/timer.h>
41#include <linux/list.h>
42#include <linux/interrupt.h>
43#include <linux/moduleparam.h>
44#include <linux/device.h>
45#include <linux/usb/ch9.h>
46#include <linux/usb/gadget.h>
47#include <linux/usb/otg.h>
48#include <linux/pm.h>
49#include <linux/io.h>
50#include <linux/irq.h>
51#include <asm/system.h>
52#include <asm/unaligned.h>
53
54#include "langwell_udc.h"
55
56
57#define DRIVER_DESC "Intel Langwell USB Device Controller driver"
58#define DRIVER_VERSION "16 May 2009"
59
60static const char driver_name[] = "langwell_udc";
61static const char driver_desc[] = DRIVER_DESC;
62
63
64/* controller device global variable */
65static struct langwell_udc *the_controller;
66
67/* for endpoint 0 operations */
68static const struct usb_endpoint_descriptor
69langwell_ep0_desc = {
70 .bLength = USB_DT_ENDPOINT_SIZE,
71 .bDescriptorType = USB_DT_ENDPOINT,
72 .bEndpointAddress = 0,
73 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
74 .wMaxPacketSize = EP0_MAX_PKT_SIZE,
75};
76
77
78/*-------------------------------------------------------------------------*/
79/* debugging */
80
81#ifdef DEBUG
82#define DBG(dev, fmt, args...) \
83 pr_debug("%s %s: " fmt , driver_name, \
84 pci_name(dev->pdev), ## args)
85#else
86#define DBG(dev, fmt, args...) \
87 do { } while (0)
88#endif /* DEBUG */
89
90
91#ifdef VERBOSE
92#define VDBG DBG
93#else
94#define VDBG(dev, fmt, args...) \
95 do { } while (0)
96#endif /* VERBOSE */
97
98
99#define ERROR(dev, fmt, args...) \
100 pr_err("%s %s: " fmt , driver_name, \
101 pci_name(dev->pdev), ## args)
102
103#define WARNING(dev, fmt, args...) \
104 pr_warning("%s %s: " fmt , driver_name, \
105 pci_name(dev->pdev), ## args)
106
107#define INFO(dev, fmt, args...) \
108 pr_info("%s %s: " fmt , driver_name, \
109 pci_name(dev->pdev), ## args)
110
111
112#ifdef VERBOSE
113static inline void print_all_registers(struct langwell_udc *dev)
114{
115 int i;
116
117 /* Capability Registers */
118 printk(KERN_DEBUG "Capability Registers (offset: "
119 "0x%04x, length: 0x%08x)\n",
120 CAP_REG_OFFSET,
121 (u32)sizeof(struct langwell_cap_regs));
122 printk(KERN_DEBUG "caplength=0x%02x\n",
123 readb(&dev->cap_regs->caplength));
124 printk(KERN_DEBUG "hciversion=0x%04x\n",
125 readw(&dev->cap_regs->hciversion));
126 printk(KERN_DEBUG "hcsparams=0x%08x\n",
127 readl(&dev->cap_regs->hcsparams));
128 printk(KERN_DEBUG "hccparams=0x%08x\n",
129 readl(&dev->cap_regs->hccparams));
130 printk(KERN_DEBUG "dciversion=0x%04x\n",
131 readw(&dev->cap_regs->dciversion));
132 printk(KERN_DEBUG "dccparams=0x%08x\n",
133 readl(&dev->cap_regs->dccparams));
134
135 /* Operational Registers */
136 printk(KERN_DEBUG "Operational Registers (offset: "
137 "0x%04x, length: 0x%08x)\n",
138 OP_REG_OFFSET,
139 (u32)sizeof(struct langwell_op_regs));
140 printk(KERN_DEBUG "extsts=0x%08x\n",
141 readl(&dev->op_regs->extsts));
142 printk(KERN_DEBUG "extintr=0x%08x\n",
143 readl(&dev->op_regs->extintr));
144 printk(KERN_DEBUG "usbcmd=0x%08x\n",
145 readl(&dev->op_regs->usbcmd));
146 printk(KERN_DEBUG "usbsts=0x%08x\n",
147 readl(&dev->op_regs->usbsts));
148 printk(KERN_DEBUG "usbintr=0x%08x\n",
149 readl(&dev->op_regs->usbintr));
150 printk(KERN_DEBUG "frindex=0x%08x\n",
151 readl(&dev->op_regs->frindex));
152 printk(KERN_DEBUG "ctrldssegment=0x%08x\n",
153 readl(&dev->op_regs->ctrldssegment));
154 printk(KERN_DEBUG "deviceaddr=0x%08x\n",
155 readl(&dev->op_regs->deviceaddr));
156 printk(KERN_DEBUG "endpointlistaddr=0x%08x\n",
157 readl(&dev->op_regs->endpointlistaddr));
158 printk(KERN_DEBUG "ttctrl=0x%08x\n",
159 readl(&dev->op_regs->ttctrl));
160 printk(KERN_DEBUG "burstsize=0x%08x\n",
161 readl(&dev->op_regs->burstsize));
162 printk(KERN_DEBUG "txfilltuning=0x%08x\n",
163 readl(&dev->op_regs->txfilltuning));
164 printk(KERN_DEBUG "txttfilltuning=0x%08x\n",
165 readl(&dev->op_regs->txttfilltuning));
166 printk(KERN_DEBUG "ic_usb=0x%08x\n",
167 readl(&dev->op_regs->ic_usb));
168 printk(KERN_DEBUG "ulpi_viewport=0x%08x\n",
169 readl(&dev->op_regs->ulpi_viewport));
170 printk(KERN_DEBUG "configflag=0x%08x\n",
171 readl(&dev->op_regs->configflag));
172 printk(KERN_DEBUG "portsc1=0x%08x\n",
173 readl(&dev->op_regs->portsc1));
174 printk(KERN_DEBUG "devlc=0x%08x\n",
175 readl(&dev->op_regs->devlc));
176 printk(KERN_DEBUG "otgsc=0x%08x\n",
177 readl(&dev->op_regs->otgsc));
178 printk(KERN_DEBUG "usbmode=0x%08x\n",
179 readl(&dev->op_regs->usbmode));
180 printk(KERN_DEBUG "endptnak=0x%08x\n",
181 readl(&dev->op_regs->endptnak));
182 printk(KERN_DEBUG "endptnaken=0x%08x\n",
183 readl(&dev->op_regs->endptnaken));
184 printk(KERN_DEBUG "endptsetupstat=0x%08x\n",
185 readl(&dev->op_regs->endptsetupstat));
186 printk(KERN_DEBUG "endptprime=0x%08x\n",
187 readl(&dev->op_regs->endptprime));
188 printk(KERN_DEBUG "endptflush=0x%08x\n",
189 readl(&dev->op_regs->endptflush));
190 printk(KERN_DEBUG "endptstat=0x%08x\n",
191 readl(&dev->op_regs->endptstat));
192 printk(KERN_DEBUG "endptcomplete=0x%08x\n",
193 readl(&dev->op_regs->endptcomplete));
194
195 for (i = 0; i < dev->ep_max / 2; i++) {
196 printk(KERN_DEBUG "endptctrl[%d]=0x%08x\n",
197 i, readl(&dev->op_regs->endptctrl[i]));
198 }
199}
200#endif /* VERBOSE */
201
202
203/*-------------------------------------------------------------------------*/
204
205#define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out")
206
207#define is_in(ep) (((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir == \
208 USB_DIR_IN) : ((ep)->desc->bEndpointAddress \
209 & USB_DIR_IN) == USB_DIR_IN)
210
211
212#ifdef DEBUG
213static char *type_string(u8 bmAttributes)
214{
215 switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
216 case USB_ENDPOINT_XFER_BULK:
217 return "bulk";
218 case USB_ENDPOINT_XFER_ISOC:
219 return "iso";
220 case USB_ENDPOINT_XFER_INT:
221 return "int";
222 };
223
224 return "control";
225}
226#endif
227
228
229/* configure endpoint control registers */
230static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
231 unsigned char is_in, unsigned char ep_type)
232{
233 struct langwell_udc *dev;
234 u32 endptctrl;
235
236 dev = ep->dev;
237 VDBG(dev, "---> %s()\n", __func__);
238
239 endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
240 if (is_in) { /* TX */
241 if (ep_num)
242 endptctrl |= EPCTRL_TXR;
243 endptctrl |= EPCTRL_TXE;
244 endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
245 } else { /* RX */
246 if (ep_num)
247 endptctrl |= EPCTRL_RXR;
248 endptctrl |= EPCTRL_RXE;
249 endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
250 }
251
252 writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
253
254 VDBG(dev, "<--- %s()\n", __func__);
255}
256
257
258/* reset ep0 dQH and endptctrl */
259static void ep0_reset(struct langwell_udc *dev)
260{
261 struct langwell_ep *ep;
262 int i;
263
264 VDBG(dev, "---> %s()\n", __func__);
265
266 /* ep0 in and out */
267 for (i = 0; i < 2; i++) {
268 ep = &dev->ep[i];
269 ep->dev = dev;
270
271 /* ep0 dQH */
272 ep->dqh = &dev->ep_dqh[i];
273
274 /* configure ep0 endpoint capabilities in dQH */
275 ep->dqh->dqh_ios = 1;
276 ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
277
278 /* FIXME: enable ep0-in HW zero length termination select */
279 if (is_in(ep))
280 ep->dqh->dqh_zlt = 0;
281 ep->dqh->dqh_mult = 0;
282
283 /* configure ep0 control registers */
284 ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
285 }
286
287 VDBG(dev, "<--- %s()\n", __func__);
288 return;
289}
290
291
292/*-------------------------------------------------------------------------*/
293
294/* endpoints operations */
295
296/* configure endpoint, making it usable */
297static int langwell_ep_enable(struct usb_ep *_ep,
298 const struct usb_endpoint_descriptor *desc)
299{
300 struct langwell_udc *dev;
301 struct langwell_ep *ep;
302 u16 max = 0;
303 unsigned long flags;
304 int retval = 0;
305 unsigned char zlt, ios = 0, mult = 0;
306
307 ep = container_of(_ep, struct langwell_ep, ep);
308 dev = ep->dev;
309 VDBG(dev, "---> %s()\n", __func__);
310
311 if (!_ep || !desc || ep->desc
312 || desc->bDescriptorType != USB_DT_ENDPOINT)
313 return -EINVAL;
314
315 if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
316 return -ESHUTDOWN;
317
318 max = le16_to_cpu(desc->wMaxPacketSize);
319
320 /*
321 * disable HW zero length termination select
322 * driver handles zero length packet through req->req.zero
323 */
324 zlt = 1;
325
326 /*
327 * sanity check type, direction, address, and then
328 * initialize the endpoint capabilities fields in dQH
329 */
330 switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
331 case USB_ENDPOINT_XFER_CONTROL:
332 ios = 1;
333 break;
334 case USB_ENDPOINT_XFER_BULK:
335 if ((dev->gadget.speed == USB_SPEED_HIGH
336 && max != 512)
337 || (dev->gadget.speed == USB_SPEED_FULL
338 && max > 64)) {
339 goto done;
340 }
341 break;
342 case USB_ENDPOINT_XFER_INT:
343 if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
344 goto done;
345
346 switch (dev->gadget.speed) {
347 case USB_SPEED_HIGH:
348 if (max <= 1024)
349 break;
350 case USB_SPEED_FULL:
351 if (max <= 64)
352 break;
353 default:
354 if (max <= 8)
355 break;
356 goto done;
357 }
358 break;
359 case USB_ENDPOINT_XFER_ISOC:
360 if (strstr(ep->ep.name, "-bulk")
361 || strstr(ep->ep.name, "-int"))
362 goto done;
363
364 switch (dev->gadget.speed) {
365 case USB_SPEED_HIGH:
366 if (max <= 1024)
367 break;
368 case USB_SPEED_FULL:
369 if (max <= 1023)
370 break;
371 default:
372 goto done;
373 }
374 /*
375 * FIXME:
376 * calculate transactions needed for high bandwidth iso
377 */
378 mult = (unsigned char)(1 + ((max >> 11) & 0x03));
379 max = max & 0x8ff; /* bit 0~10 */
380 /* 3 transactions at most */
381 if (mult > 3)
382 goto done;
383 break;
384 default:
385 goto done;
386 }
387
388 spin_lock_irqsave(&dev->lock, flags);
389
390 /* configure endpoint capabilities in dQH */
391 ep->dqh->dqh_ios = ios;
392 ep->dqh->dqh_mpl = cpu_to_le16(max);
393 ep->dqh->dqh_zlt = zlt;
394 ep->dqh->dqh_mult = mult;
395
396 ep->ep.maxpacket = max;
397 ep->desc = desc;
398 ep->stopped = 0;
399 ep->ep_num = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
400
401 /* ep_type */
402 ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
403
404 /* configure endpoint control registers */
405 ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
406
407 DBG(dev, "enabled %s (ep%d%s-%s), max %04x\n",
408 _ep->name,
409 ep->ep_num,
410 DIR_STRING(desc->bEndpointAddress),
411 type_string(desc->bmAttributes),
412 max);
413
414 spin_unlock_irqrestore(&dev->lock, flags);
415done:
416 VDBG(dev, "<--- %s()\n", __func__);
417 return retval;
418}
419
420
421/*-------------------------------------------------------------------------*/
422
423/* retire a request */
424static void done(struct langwell_ep *ep, struct langwell_request *req,
425 int status)
426{
427 struct langwell_udc *dev = ep->dev;
428 unsigned stopped = ep->stopped;
429 struct langwell_dtd *curr_dtd, *next_dtd;
430 int i;
431
432 VDBG(dev, "---> %s()\n", __func__);
433
434 /* remove the req from ep->queue */
435 list_del_init(&req->queue);
436
437 if (req->req.status == -EINPROGRESS)
438 req->req.status = status;
439 else
440 status = req->req.status;
441
442 /* free dTD for the request */
443 next_dtd = req->head;
444 for (i = 0; i < req->dtd_count; i++) {
445 curr_dtd = next_dtd;
446 if (i != req->dtd_count - 1)
447 next_dtd = curr_dtd->next_dtd_virt;
448 dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
449 }
450
451 if (req->mapped) {
452 dma_unmap_single(&dev->pdev->dev, req->req.dma, req->req.length,
453 is_in(ep) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
454 req->req.dma = DMA_ADDR_INVALID;
455 req->mapped = 0;
456 } else
457 dma_sync_single_for_cpu(&dev->pdev->dev, req->req.dma,
458 req->req.length,
459 is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
460
461 if (status != -ESHUTDOWN)
462 DBG(dev, "complete %s, req %p, stat %d, len %u/%u\n",
463 ep->ep.name, &req->req, status,
464 req->req.actual, req->req.length);
465
466 /* don't modify queue heads during completion callback */
467 ep->stopped = 1;
468
469 spin_unlock(&dev->lock);
470 /* complete routine from gadget driver */
471 if (req->req.complete)
472 req->req.complete(&ep->ep, &req->req);
473
474 spin_lock(&dev->lock);
475 ep->stopped = stopped;
476
477 VDBG(dev, "<--- %s()\n", __func__);
478}
479
480
481static void langwell_ep_fifo_flush(struct usb_ep *_ep);
482
483/* delete all endpoint requests, called with spinlock held */
484static void nuke(struct langwell_ep *ep, int status)
485{
486 /* called with spinlock held */
487 ep->stopped = 1;
488
489 /* endpoint fifo flush */
490 if (&ep->ep && ep->desc)
491 langwell_ep_fifo_flush(&ep->ep);
492
493 while (!list_empty(&ep->queue)) {
494 struct langwell_request *req = NULL;
495 req = list_entry(ep->queue.next, struct langwell_request,
496 queue);
497 done(ep, req, status);
498 }
499}
500
501
502/*-------------------------------------------------------------------------*/
503
504/* endpoint is no longer usable */
505static int langwell_ep_disable(struct usb_ep *_ep)
506{
507 struct langwell_ep *ep;
508 unsigned long flags;
509 struct langwell_udc *dev;
510 int ep_num;
511 u32 endptctrl;
512
513 ep = container_of(_ep, struct langwell_ep, ep);
514 dev = ep->dev;
515 VDBG(dev, "---> %s()\n", __func__);
516
517 if (!_ep || !ep->desc)
518 return -EINVAL;
519
520 spin_lock_irqsave(&dev->lock, flags);
521
522 /* disable endpoint control register */
523 ep_num = ep->ep_num;
524 endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
525 if (is_in(ep))
526 endptctrl &= ~EPCTRL_TXE;
527 else
528 endptctrl &= ~EPCTRL_RXE;
529 writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
530
531 /* nuke all pending requests (does flush) */
532 nuke(ep, -ESHUTDOWN);
533
534 ep->desc = NULL;
535 ep->stopped = 1;
536
537 spin_unlock_irqrestore(&dev->lock, flags);
538
539 DBG(dev, "disabled %s\n", _ep->name);
540 VDBG(dev, "<--- %s()\n", __func__);
541
542 return 0;
543}
544
545
546/* allocate a request object to use with this endpoint */
547static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
548 gfp_t gfp_flags)
549{
550 struct langwell_ep *ep;
551 struct langwell_udc *dev;
552 struct langwell_request *req = NULL;
553
554 if (!_ep)
555 return NULL;
556
557 ep = container_of(_ep, struct langwell_ep, ep);
558 dev = ep->dev;
559 VDBG(dev, "---> %s()\n", __func__);
560
561 req = kzalloc(sizeof(*req), gfp_flags);
562 if (!req)
563 return NULL;
564
565 req->req.dma = DMA_ADDR_INVALID;
566 INIT_LIST_HEAD(&req->queue);
567
568 VDBG(dev, "alloc request for %s\n", _ep->name);
569 VDBG(dev, "<--- %s()\n", __func__);
570 return &req->req;
571}
572
573
574/* free a request object */
575static void langwell_free_request(struct usb_ep *_ep,
576 struct usb_request *_req)
577{
578 struct langwell_ep *ep;
579 struct langwell_udc *dev;
580 struct langwell_request *req = NULL;
581
582 ep = container_of(_ep, struct langwell_ep, ep);
583 dev = ep->dev;
584 VDBG(dev, "---> %s()\n", __func__);
585
586 if (!_ep || !_req)
587 return;
588
589 req = container_of(_req, struct langwell_request, req);
590 WARN_ON(!list_empty(&req->queue));
591
592 if (_req)
593 kfree(req);
594
595 VDBG(dev, "free request for %s\n", _ep->name);
596 VDBG(dev, "<--- %s()\n", __func__);
597}
598
599
600/*-------------------------------------------------------------------------*/
601
602/* queue dTD and PRIME endpoint */
603static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
604{
605 u32 bit_mask, usbcmd, endptstat, dtd_dma;
606 u8 dtd_status;
607 int i;
608 struct langwell_dqh *dqh;
609 struct langwell_udc *dev;
610
611 dev = ep->dev;
612 VDBG(dev, "---> %s()\n", __func__);
613
614 i = ep->ep_num * 2 + is_in(ep);
615 dqh = &dev->ep_dqh[i];
616
617 if (ep->ep_num)
618 VDBG(dev, "%s\n", ep->name);
619 else
620 /* ep0 */
621 VDBG(dev, "%s-%s\n", ep->name, is_in(ep) ? "in" : "out");
622
623 VDBG(dev, "ep_dqh[%d] addr: 0x%08x\n", i, (u32)&(dev->ep_dqh[i]));
624
625 bit_mask = is_in(ep) ?
626 (1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
627
628 VDBG(dev, "bit_mask = 0x%08x\n", bit_mask);
629
630 /* check if the pipe is empty */
631 if (!(list_empty(&ep->queue))) {
632 /* add dTD to the end of linked list */
633 struct langwell_request *lastreq;
634 lastreq = list_entry(ep->queue.prev,
635 struct langwell_request, queue);
636
637 lastreq->tail->dtd_next =
638 cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
639
640 /* read prime bit, if 1 goto out */
641 if (readl(&dev->op_regs->endptprime) & bit_mask)
642 goto out;
643
644 do {
645 /* set ATDTW bit in USBCMD */
646 usbcmd = readl(&dev->op_regs->usbcmd);
647 writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
648
649 /* read correct status bit */
650 endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
651
652 } while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
653
654 /* write ATDTW bit to 0 */
655 usbcmd = readl(&dev->op_regs->usbcmd);
656 writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
657
658 if (endptstat)
659 goto out;
660 }
661
662 /* write dQH next pointer and terminate bit to 0 */
663 dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
664 dqh->dtd_next = cpu_to_le32(dtd_dma);
665
666 /* clear active and halt bit */
667 dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
668 dqh->dtd_status &= dtd_status;
669 VDBG(dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
670
671 /* write 1 to endptprime register to PRIME endpoint */
672 bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
673 VDBG(dev, "endprime bit_mask = 0x%08x\n", bit_mask);
674 writel(bit_mask, &dev->op_regs->endptprime);
675out:
676 VDBG(dev, "<--- %s()\n", __func__);
677 return 0;
678}
679
680
681/* fill in the dTD structure to build a transfer descriptor */
682static struct langwell_dtd *build_dtd(struct langwell_request *req,
683 unsigned *length, dma_addr_t *dma, int *is_last)
684{
685 u32 buf_ptr;
686 struct langwell_dtd *dtd;
687 struct langwell_udc *dev;
688 int i;
689
690 dev = req->ep->dev;
691 VDBG(dev, "---> %s()\n", __func__);
692
693 /* the maximum transfer length, up to 16k bytes */
694 *length = min(req->req.length - req->req.actual,
695 (unsigned)DTD_MAX_TRANSFER_LENGTH);
696
697 /* create dTD dma_pool resource */
698 dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
699 if (dtd == NULL)
700 return dtd;
701 dtd->dtd_dma = *dma;
702
703 /* initialize buffer page pointers */
704 buf_ptr = (u32)(req->req.dma + req->req.actual);
705 for (i = 0; i < 5; i++)
706 dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
707
708 req->req.actual += *length;
709
710 /* fill in total bytes with transfer size */
711 dtd->dtd_total = cpu_to_le16(*length);
712 VDBG(dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
713
714 /* set is_last flag if req->req.zero is set or not */
715 if (req->req.zero) {
716 if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
717 *is_last = 1;
718 else
719 *is_last = 0;
720 } else if (req->req.length == req->req.actual) {
721 *is_last = 1;
722 } else
723 *is_last = 0;
724
725 if (*is_last == 0)
726 VDBG(dev, "multi-dtd request!\n");
727
728 /* set interrupt on complete bit for the last dTD */
729 if (*is_last && !req->req.no_interrupt)
730 dtd->dtd_ioc = 1;
731
732 /* set multiplier override 0 for non-ISO and non-TX endpoint */
733 dtd->dtd_multo = 0;
734
735 /* set the active bit of status field to 1 */
736 dtd->dtd_status = DTD_STS_ACTIVE;
737 VDBG(dev, "dtd->dtd_status = 0x%02x\n", dtd->dtd_status);
738
739 VDBG(dev, "length = %d, dma addr= 0x%08x\n", *length, (int)*dma);
740 VDBG(dev, "<--- %s()\n", __func__);
741 return dtd;
742}
743
744
745/* generate dTD linked list for a request */
746static int req_to_dtd(struct langwell_request *req)
747{
748 unsigned count;
749 int is_last, is_first = 1;
750 struct langwell_dtd *dtd, *last_dtd = NULL;
751 struct langwell_udc *dev;
752 dma_addr_t dma;
753
754 dev = req->ep->dev;
755 VDBG(dev, "---> %s()\n", __func__);
756 do {
757 dtd = build_dtd(req, &count, &dma, &is_last);
758 if (dtd == NULL)
759 return -ENOMEM;
760
761 if (is_first) {
762 is_first = 0;
763 req->head = dtd;
764 } else {
765 last_dtd->dtd_next = cpu_to_le32(dma);
766 last_dtd->next_dtd_virt = dtd;
767 }
768 last_dtd = dtd;
769 req->dtd_count++;
770 } while (!is_last);
771
772 /* set terminate bit to 1 for the last dTD */
773 dtd->dtd_next = DTD_TERM;
774
775 req->tail = dtd;
776
777 VDBG(dev, "<--- %s()\n", __func__);
778 return 0;
779}
780
781/*-------------------------------------------------------------------------*/
782
783/* queue (submits) an I/O requests to an endpoint */
784static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
785 gfp_t gfp_flags)
786{
787 struct langwell_request *req;
788 struct langwell_ep *ep;
789 struct langwell_udc *dev;
790 unsigned long flags;
791 int is_iso = 0, zlflag = 0;
792
793 /* always require a cpu-view buffer */
794 req = container_of(_req, struct langwell_request, req);
795 ep = container_of(_ep, struct langwell_ep, ep);
796
797 if (!_req || !_req->complete || !_req->buf
798 || !list_empty(&req->queue)) {
799 return -EINVAL;
800 }
801
802 if (unlikely(!_ep || !ep->desc))
803 return -EINVAL;
804
805 dev = ep->dev;
806 req->ep = ep;
807 VDBG(dev, "---> %s()\n", __func__);
808
809 if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
810 if (req->req.length > ep->ep.maxpacket)
811 return -EMSGSIZE;
812 is_iso = 1;
813 }
814
815 if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
816 return -ESHUTDOWN;
817
818 /* set up dma mapping in case the caller didn't */
819 if (_req->dma == DMA_ADDR_INVALID) {
820 /* WORKAROUND: WARN_ON(size == 0) */
821 if (_req->length == 0) {
822 VDBG(dev, "req->length: 0->1\n");
823 zlflag = 1;
824 _req->length++;
825 }
826
827 _req->dma = dma_map_single(&dev->pdev->dev,
828 _req->buf, _req->length,
829 is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
830 if (zlflag && (_req->length == 1)) {
831 VDBG(dev, "req->length: 1->0\n");
832 zlflag = 0;
833 _req->length = 0;
834 }
835
836 req->mapped = 1;
837 VDBG(dev, "req->mapped = 1\n");
838 } else {
839 dma_sync_single_for_device(&dev->pdev->dev,
840 _req->dma, _req->length,
841 is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
842 req->mapped = 0;
843 VDBG(dev, "req->mapped = 0\n");
844 }
845
846 DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08x\n",
847 _ep->name,
848 _req, _req->length, _req->buf, _req->dma);
849
850 _req->status = -EINPROGRESS;
851 _req->actual = 0;
852 req->dtd_count = 0;
853
854 spin_lock_irqsave(&dev->lock, flags);
855
856 /* build and put dTDs to endpoint queue */
857 if (!req_to_dtd(req)) {
858 queue_dtd(ep, req);
859 } else {
860 spin_unlock_irqrestore(&dev->lock, flags);
861 return -ENOMEM;
862 }
863
864 /* update ep0 state */
865 if (ep->ep_num == 0)
866 dev->ep0_state = DATA_STATE_XMIT;
867
868 if (likely(req != NULL)) {
869 list_add_tail(&req->queue, &ep->queue);
870 VDBG(dev, "list_add_tail() \n");
871 }
872
873 spin_unlock_irqrestore(&dev->lock, flags);
874
875 VDBG(dev, "<--- %s()\n", __func__);
876 return 0;
877}
878
879
880/* dequeue (cancels, unlinks) an I/O request from an endpoint */
881static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
882{
883 struct langwell_ep *ep;
884 struct langwell_udc *dev;
885 struct langwell_request *req;
886 unsigned long flags;
887 int stopped, ep_num, retval = 0;
888 u32 endptctrl;
889
890 ep = container_of(_ep, struct langwell_ep, ep);
891 dev = ep->dev;
892 VDBG(dev, "---> %s()\n", __func__);
893
894 if (!_ep || !ep->desc || !_req)
895 return -EINVAL;
896
897 if (!dev->driver)
898 return -ESHUTDOWN;
899
900 spin_lock_irqsave(&dev->lock, flags);
901 stopped = ep->stopped;
902
903 /* quiesce dma while we patch the queue */
904 ep->stopped = 1;
905 ep_num = ep->ep_num;
906
907 /* disable endpoint control register */
908 endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
909 if (is_in(ep))
910 endptctrl &= ~EPCTRL_TXE;
911 else
912 endptctrl &= ~EPCTRL_RXE;
913 writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
914
915 /* make sure it's still queued on this endpoint */
916 list_for_each_entry(req, &ep->queue, queue) {
917 if (&req->req == _req)
918 break;
919 }
920
921 if (&req->req != _req) {
922 retval = -EINVAL;
923 goto done;
924 }
925
926 /* queue head may be partially complete. */
927 if (ep->queue.next == &req->queue) {
928 DBG(dev, "unlink (%s) dma\n", _ep->name);
929 _req->status = -ECONNRESET;
930 langwell_ep_fifo_flush(&ep->ep);
931
932 /* not the last request in endpoint queue */
933 if (likely(ep->queue.next == &req->queue)) {
934 struct langwell_dqh *dqh;
935 struct langwell_request *next_req;
936
937 dqh = ep->dqh;
938 next_req = list_entry(req->queue.next,
939 struct langwell_request, queue);
940
941 /* point the dQH to the first dTD of next request */
942 writel((u32) next_req->head, &dqh->dqh_current);
943 }
944 } else {
945 struct langwell_request *prev_req;
946
947 prev_req = list_entry(req->queue.prev,
948 struct langwell_request, queue);
949 writel(readl(&req->tail->dtd_next),
950 &prev_req->tail->dtd_next);
951 }
952
953 done(ep, req, -ECONNRESET);
954
955done:
956 /* enable endpoint again */
957 endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
958 if (is_in(ep))
959 endptctrl |= EPCTRL_TXE;
960 else
961 endptctrl |= EPCTRL_RXE;
962 writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
963
964 ep->stopped = stopped;
965 spin_unlock_irqrestore(&dev->lock, flags);
966
967 VDBG(dev, "<--- %s()\n", __func__);
968 return retval;
969}
970
971
972/*-------------------------------------------------------------------------*/
973
974/* endpoint set/clear halt */
975static void ep_set_halt(struct langwell_ep *ep, int value)
976{
977 u32 endptctrl = 0;
978 int ep_num;
979 struct langwell_udc *dev = ep->dev;
980 VDBG(dev, "---> %s()\n", __func__);
981
982 ep_num = ep->ep_num;
983 endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
984
985 /* value: 1 - set halt, 0 - clear halt */
986 if (value) {
987 /* set the stall bit */
988 if (is_in(ep))
989 endptctrl |= EPCTRL_TXS;
990 else
991 endptctrl |= EPCTRL_RXS;
992 } else {
993 /* clear the stall bit and reset data toggle */
994 if (is_in(ep)) {
995 endptctrl &= ~EPCTRL_TXS;
996 endptctrl |= EPCTRL_TXR;
997 } else {
998 endptctrl &= ~EPCTRL_RXS;
999 endptctrl |= EPCTRL_RXR;
1000 }
1001 }
1002
1003 writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
1004
1005 VDBG(dev, "<--- %s()\n", __func__);
1006}
1007
1008
1009/* set the endpoint halt feature */
1010static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
1011{
1012 struct langwell_ep *ep;
1013 struct langwell_udc *dev;
1014 unsigned long flags;
1015 int retval = 0;
1016
1017 ep = container_of(_ep, struct langwell_ep, ep);
1018 dev = ep->dev;
1019
1020 VDBG(dev, "---> %s()\n", __func__);
1021
1022 if (!_ep || !ep->desc)
1023 return -EINVAL;
1024
1025 if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
1026 return -ESHUTDOWN;
1027
1028 if (ep->desc && (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
1029 == USB_ENDPOINT_XFER_ISOC)
1030 return -EOPNOTSUPP;
1031
1032 spin_lock_irqsave(&dev->lock, flags);
1033
1034 /*
1035 * attempt to halt IN ep will fail if any transfer requests
1036 * are still queue
1037 */
1038 if (!list_empty(&ep->queue) && is_in(ep) && value) {
1039 /* IN endpoint FIFO holds bytes */
1040 DBG(dev, "%s FIFO holds bytes\n", _ep->name);
1041 retval = -EAGAIN;
1042 goto done;
1043 }
1044
1045 /* endpoint set/clear halt */
1046 if (ep->ep_num) {
1047 ep_set_halt(ep, value);
1048 } else { /* endpoint 0 */
1049 dev->ep0_state = WAIT_FOR_SETUP;
1050 dev->ep0_dir = USB_DIR_OUT;
1051 }
1052done:
1053 spin_unlock_irqrestore(&dev->lock, flags);
1054 DBG(dev, "%s %s halt\n", _ep->name, value ? "set" : "clear");
1055 VDBG(dev, "<--- %s()\n", __func__);
1056 return retval;
1057}
1058
1059
1060/* set the halt feature and ignores clear requests */
1061static int langwell_ep_set_wedge(struct usb_ep *_ep)
1062{
1063 struct langwell_ep *ep;
1064 struct langwell_udc *dev;
1065
1066 ep = container_of(_ep, struct langwell_ep, ep);
1067 dev = ep->dev;
1068
1069 VDBG(dev, "---> %s()\n", __func__);
1070
1071 if (!_ep || !ep->desc)
1072 return -EINVAL;
1073
1074 VDBG(dev, "<--- %s()\n", __func__);
1075 return usb_ep_set_halt(_ep);
1076}
1077
1078
1079/* flush contents of a fifo */
1080static void langwell_ep_fifo_flush(struct usb_ep *_ep)
1081{
1082 struct langwell_ep *ep;
1083 struct langwell_udc *dev;
1084 u32 flush_bit;
1085 unsigned long timeout;
1086
1087 ep = container_of(_ep, struct langwell_ep, ep);
1088 dev = ep->dev;
1089
1090 VDBG(dev, "---> %s()\n", __func__);
1091
1092 if (!_ep || !ep->desc) {
1093 VDBG(dev, "ep or ep->desc is NULL\n");
1094 VDBG(dev, "<--- %s()\n", __func__);
1095 return;
1096 }
1097
1098 VDBG(dev, "%s-%s fifo flush\n", _ep->name, is_in(ep) ? "in" : "out");
1099
1100 /* flush endpoint buffer */
1101 if (ep->ep_num == 0)
1102 flush_bit = (1 << 16) | 1;
1103 else if (is_in(ep))
1104 flush_bit = 1 << (ep->ep_num + 16); /* TX */
1105 else
1106 flush_bit = 1 << ep->ep_num; /* RX */
1107
1108 /* wait until flush complete */
1109 timeout = jiffies + FLUSH_TIMEOUT;
1110 do {
1111 writel(flush_bit, &dev->op_regs->endptflush);
1112 while (readl(&dev->op_regs->endptflush)) {
1113 if (time_after(jiffies, timeout)) {
1114 ERROR(dev, "ep flush timeout\n");
1115 goto done;
1116 }
1117 cpu_relax();
1118 }
1119 } while (readl(&dev->op_regs->endptstat) & flush_bit);
1120done:
1121 VDBG(dev, "<--- %s()\n", __func__);
1122}
1123
1124
1125/* endpoints operations structure */
1126static const struct usb_ep_ops langwell_ep_ops = {
1127
1128 /* configure endpoint, making it usable */
1129 .enable = langwell_ep_enable,
1130
1131 /* endpoint is no longer usable */
1132 .disable = langwell_ep_disable,
1133
1134 /* allocate a request object to use with this endpoint */
1135 .alloc_request = langwell_alloc_request,
1136
1137 /* free a request object */
1138 .free_request = langwell_free_request,
1139
1140 /* queue (submits) an I/O requests to an endpoint */
1141 .queue = langwell_ep_queue,
1142
1143 /* dequeue (cancels, unlinks) an I/O request from an endpoint */
1144 .dequeue = langwell_ep_dequeue,
1145
1146 /* set the endpoint halt feature */
1147 .set_halt = langwell_ep_set_halt,
1148
1149 /* set the halt feature and ignores clear requests */
1150 .set_wedge = langwell_ep_set_wedge,
1151
1152 /* flush contents of a fifo */
1153 .fifo_flush = langwell_ep_fifo_flush,
1154};
1155
1156
1157/*-------------------------------------------------------------------------*/
1158
1159/* device controller usb_gadget_ops structure */
1160
1161/* returns the current frame number */
1162static int langwell_get_frame(struct usb_gadget *_gadget)
1163{
1164 struct langwell_udc *dev;
1165 u16 retval;
1166
1167 if (!_gadget)
1168 return -ENODEV;
1169
1170 dev = container_of(_gadget, struct langwell_udc, gadget);
1171 VDBG(dev, "---> %s()\n", __func__);
1172
1173 retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
1174
1175 VDBG(dev, "<--- %s()\n", __func__);
1176 return retval;
1177}
1178
1179
1180/* tries to wake up the host connected to this gadget */
1181static int langwell_wakeup(struct usb_gadget *_gadget)
1182{
1183 struct langwell_udc *dev;
1184 u32 portsc1, devlc;
1185 unsigned long flags;
1186
1187 if (!_gadget)
1188 return 0;
1189
1190 dev = container_of(_gadget, struct langwell_udc, gadget);
1191 VDBG(dev, "---> %s()\n", __func__);
1192
1193 /* Remote Wakeup feature not enabled by host */
1194 if (!dev->remote_wakeup)
1195 return -ENOTSUPP;
1196
1197 spin_lock_irqsave(&dev->lock, flags);
1198
1199 portsc1 = readl(&dev->op_regs->portsc1);
1200 if (!(portsc1 & PORTS_SUSP)) {
1201 spin_unlock_irqrestore(&dev->lock, flags);
1202 return 0;
1203 }
1204
1205 /* LPM L1 to L0, remote wakeup */
1206 if (dev->lpm && dev->lpm_state == LPM_L1) {
1207 portsc1 |= PORTS_SLP;
1208 writel(portsc1, &dev->op_regs->portsc1);
1209 }
1210
1211 /* force port resume */
1212 if (dev->usb_state == USB_STATE_SUSPENDED) {
1213 portsc1 |= PORTS_FPR;
1214 writel(portsc1, &dev->op_regs->portsc1);
1215 }
1216
1217 /* exit PHY low power suspend */
1218 devlc = readl(&dev->op_regs->devlc);
1219 VDBG(dev, "devlc = 0x%08x\n", devlc);
1220 devlc &= ~LPM_PHCD;
1221 writel(devlc, &dev->op_regs->devlc);
1222
1223 spin_unlock_irqrestore(&dev->lock, flags);
1224
1225 VDBG(dev, "<--- %s()\n", __func__);
1226 return 0;
1227}
1228
1229
1230/* notify controller that VBUS is powered or not */
1231static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
1232{
1233 struct langwell_udc *dev;
1234 unsigned long flags;
1235 u32 usbcmd;
1236
1237 if (!_gadget)
1238 return -ENODEV;
1239
1240 dev = container_of(_gadget, struct langwell_udc, gadget);
1241 VDBG(dev, "---> %s()\n", __func__);
1242
1243 spin_lock_irqsave(&dev->lock, flags);
1244 VDBG(dev, "VBUS status: %s\n", is_active ? "on" : "off");
1245
1246 dev->vbus_active = (is_active != 0);
1247 if (dev->driver && dev->softconnected && dev->vbus_active) {
1248 usbcmd = readl(&dev->op_regs->usbcmd);
1249 usbcmd |= CMD_RUNSTOP;
1250 writel(usbcmd, &dev->op_regs->usbcmd);
1251 } else {
1252 usbcmd = readl(&dev->op_regs->usbcmd);
1253 usbcmd &= ~CMD_RUNSTOP;
1254 writel(usbcmd, &dev->op_regs->usbcmd);
1255 }
1256
1257 spin_unlock_irqrestore(&dev->lock, flags);
1258
1259 VDBG(dev, "<--- %s()\n", __func__);
1260 return 0;
1261}
1262
1263
1264/* constrain controller's VBUS power usage */
1265static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
1266{
1267 struct langwell_udc *dev;
1268
1269 if (!_gadget)
1270 return -ENODEV;
1271
1272 dev = container_of(_gadget, struct langwell_udc, gadget);
1273 VDBG(dev, "---> %s()\n", __func__);
1274
1275 if (dev->transceiver) {
1276 VDBG(dev, "otg_set_power\n");
1277 VDBG(dev, "<--- %s()\n", __func__);
1278 return otg_set_power(dev->transceiver, mA);
1279 }
1280
1281 VDBG(dev, "<--- %s()\n", __func__);
1282 return -ENOTSUPP;
1283}
1284
1285
1286/* D+ pullup, software-controlled connect/disconnect to USB host */
1287static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
1288{
1289 struct langwell_udc *dev;
1290 u32 usbcmd;
1291 unsigned long flags;
1292
1293 if (!_gadget)
1294 return -ENODEV;
1295
1296 dev = container_of(_gadget, struct langwell_udc, gadget);
1297
1298 VDBG(dev, "---> %s()\n", __func__);
1299
1300 spin_lock_irqsave(&dev->lock, flags);
1301 dev->softconnected = (is_on != 0);
1302
1303 if (dev->driver && dev->softconnected && dev->vbus_active) {
1304 usbcmd = readl(&dev->op_regs->usbcmd);
1305 usbcmd |= CMD_RUNSTOP;
1306 writel(usbcmd, &dev->op_regs->usbcmd);
1307 } else {
1308 usbcmd = readl(&dev->op_regs->usbcmd);
1309 usbcmd &= ~CMD_RUNSTOP;
1310 writel(usbcmd, &dev->op_regs->usbcmd);
1311 }
1312 spin_unlock_irqrestore(&dev->lock, flags);
1313
1314 VDBG(dev, "<--- %s()\n", __func__);
1315 return 0;
1316}
1317
1318
1319/* device controller usb_gadget_ops structure */
1320static const struct usb_gadget_ops langwell_ops = {
1321
1322 /* returns the current frame number */
1323 .get_frame = langwell_get_frame,
1324
1325 /* tries to wake up the host connected to this gadget */
1326 .wakeup = langwell_wakeup,
1327
1328 /* set the device selfpowered feature, always selfpowered */
1329 /* .set_selfpowered = langwell_set_selfpowered, */
1330
1331 /* notify controller that VBUS is powered or not */
1332 .vbus_session = langwell_vbus_session,
1333
1334 /* constrain controller's VBUS power usage */
1335 .vbus_draw = langwell_vbus_draw,
1336
1337 /* D+ pullup, software-controlled connect/disconnect to USB host */
1338 .pullup = langwell_pullup,
1339};
1340
1341
1342/*-------------------------------------------------------------------------*/
1343
1344/* device controller operations */
1345
1346/* reset device controller */
1347static int langwell_udc_reset(struct langwell_udc *dev)
1348{
1349 u32 usbcmd, usbmode, devlc, endpointlistaddr;
1350 unsigned long timeout;
1351
1352 if (!dev)
1353 return -EINVAL;
1354
1355 DBG(dev, "---> %s()\n", __func__);
1356
1357 /* set controller to stop state */
1358 usbcmd = readl(&dev->op_regs->usbcmd);
1359 usbcmd &= ~CMD_RUNSTOP;
1360 writel(usbcmd, &dev->op_regs->usbcmd);
1361
1362 /* reset device controller */
1363 usbcmd = readl(&dev->op_regs->usbcmd);
1364 usbcmd |= CMD_RST;
1365 writel(usbcmd, &dev->op_regs->usbcmd);
1366
1367 /* wait for reset to complete */
1368 timeout = jiffies + RESET_TIMEOUT;
1369 while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
1370 if (time_after(jiffies, timeout)) {
1371 ERROR(dev, "device reset timeout\n");
1372 return -ETIMEDOUT;
1373 }
1374 cpu_relax();
1375 }
1376
1377 /* set controller to device mode */
1378 usbmode = readl(&dev->op_regs->usbmode);
1379 usbmode |= MODE_DEVICE;
1380
1381 /* turn setup lockout off, require setup tripwire in usbcmd */
1382 usbmode |= MODE_SLOM;
1383
1384 writel(usbmode, &dev->op_regs->usbmode);
1385 usbmode = readl(&dev->op_regs->usbmode);
1386 VDBG(dev, "usbmode=0x%08x\n", usbmode);
1387
1388 /* Write-Clear setup status */
1389 writel(0, &dev->op_regs->usbsts);
1390
1391 /* if support USB LPM, ACK all LPM token */
1392 if (dev->lpm) {
1393 devlc = readl(&dev->op_regs->devlc);
1394 devlc &= ~LPM_STL; /* don't STALL LPM token */
1395 devlc &= ~LPM_NYT_ACK; /* ACK LPM token */
1396 writel(devlc, &dev->op_regs->devlc);
1397 }
1398
1399 /* fill endpointlistaddr register */
1400 endpointlistaddr = dev->ep_dqh_dma;
1401 endpointlistaddr &= ENDPOINTLISTADDR_MASK;
1402 writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
1403
1404 VDBG(dev, "dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
1405 dev->ep_dqh, endpointlistaddr,
1406 readl(&dev->op_regs->endpointlistaddr));
1407 DBG(dev, "<--- %s()\n", __func__);
1408 return 0;
1409}
1410
1411
1412/* reinitialize device controller endpoints */
1413static int eps_reinit(struct langwell_udc *dev)
1414{
1415 struct langwell_ep *ep;
1416 char name[14];
1417 int i;
1418
1419 VDBG(dev, "---> %s()\n", __func__);
1420
1421 /* initialize ep0 */
1422 ep = &dev->ep[0];
1423 ep->dev = dev;
1424 strncpy(ep->name, "ep0", sizeof(ep->name));
1425 ep->ep.name = ep->name;
1426 ep->ep.ops = &langwell_ep_ops;
1427 ep->stopped = 0;
1428 ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
1429 ep->ep_num = 0;
1430 ep->desc = &langwell_ep0_desc;
1431 INIT_LIST_HEAD(&ep->queue);
1432
1433 ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
1434
1435 /* initialize other endpoints */
1436 for (i = 2; i < dev->ep_max; i++) {
1437 ep = &dev->ep[i];
1438 if (i % 2)
1439 snprintf(name, sizeof(name), "ep%din", i / 2);
1440 else
1441 snprintf(name, sizeof(name), "ep%dout", i / 2);
1442 ep->dev = dev;
1443 strncpy(ep->name, name, sizeof(ep->name));
1444 ep->ep.name = ep->name;
1445
1446 ep->ep.ops = &langwell_ep_ops;
1447 ep->stopped = 0;
1448 ep->ep.maxpacket = (unsigned short) ~0;
1449 ep->ep_num = i / 2;
1450
1451 INIT_LIST_HEAD(&ep->queue);
1452 list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
1453
1454 ep->dqh = &dev->ep_dqh[i];
1455 }
1456
1457 VDBG(dev, "<--- %s()\n", __func__);
1458 return 0;
1459}
1460
1461
1462/* enable interrupt and set controller to run state */
1463static void langwell_udc_start(struct langwell_udc *dev)
1464{
1465 u32 usbintr, usbcmd;
1466 DBG(dev, "---> %s()\n", __func__);
1467
1468 /* enable interrupts */
1469 usbintr = INTR_ULPIE /* ULPI */
1470 | INTR_SLE /* suspend */
1471 /* | INTR_SRE SOF received */
1472 | INTR_URE /* USB reset */
1473 | INTR_AAE /* async advance */
1474 | INTR_SEE /* system error */
1475 | INTR_FRE /* frame list rollover */
1476 | INTR_PCE /* port change detect */
1477 | INTR_UEE /* USB error interrupt */
1478 | INTR_UE; /* USB interrupt */
1479 writel(usbintr, &dev->op_regs->usbintr);
1480
1481 /* clear stopped bit */
1482 dev->stopped = 0;
1483
1484 /* set controller to run */
1485 usbcmd = readl(&dev->op_regs->usbcmd);
1486 usbcmd |= CMD_RUNSTOP;
1487 writel(usbcmd, &dev->op_regs->usbcmd);
1488
1489 DBG(dev, "<--- %s()\n", __func__);
1490 return;
1491}
1492
1493
1494/* disable interrupt and set controller to stop state */
1495static void langwell_udc_stop(struct langwell_udc *dev)
1496{
1497 u32 usbcmd;
1498
1499 DBG(dev, "---> %s()\n", __func__);
1500
1501 /* disable all interrupts */
1502 writel(0, &dev->op_regs->usbintr);
1503
1504 /* set stopped bit */
1505 dev->stopped = 1;
1506
1507 /* set controller to stop state */
1508 usbcmd = readl(&dev->op_regs->usbcmd);
1509 usbcmd &= ~CMD_RUNSTOP;
1510 writel(usbcmd, &dev->op_regs->usbcmd);
1511
1512 DBG(dev, "<--- %s()\n", __func__);
1513 return;
1514}
1515
1516
1517/* stop all USB activities */
1518static void stop_activity(struct langwell_udc *dev,
1519 struct usb_gadget_driver *driver)
1520{
1521 struct langwell_ep *ep;
1522 DBG(dev, "---> %s()\n", __func__);
1523
1524 nuke(&dev->ep[0], -ESHUTDOWN);
1525
1526 list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
1527 nuke(ep, -ESHUTDOWN);
1528 }
1529
1530 /* report disconnect; the driver is already quiesced */
1531 if (driver) {
1532 spin_unlock(&dev->lock);
1533 driver->disconnect(&dev->gadget);
1534 spin_lock(&dev->lock);
1535 }
1536
1537 DBG(dev, "<--- %s()\n", __func__);
1538}
1539
1540
1541/*-------------------------------------------------------------------------*/
1542
1543/* device "function" sysfs attribute file */
1544static ssize_t show_function(struct device *_dev,
1545 struct device_attribute *attr, char *buf)
1546{
1547 struct langwell_udc *dev = the_controller;
1548
1549 if (!dev->driver || !dev->driver->function
1550 || strlen(dev->driver->function) > PAGE_SIZE)
1551 return 0;
1552
1553 return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
1554}
1555static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
1556
1557
1558/* device "langwell_udc" sysfs attribute file */
1559static ssize_t show_langwell_udc(struct device *_dev,
1560 struct device_attribute *attr, char *buf)
1561{
1562 struct langwell_udc *dev = the_controller;
1563 struct langwell_request *req;
1564 struct langwell_ep *ep = NULL;
1565 char *next;
1566 unsigned size;
1567 unsigned t;
1568 unsigned i;
1569 unsigned long flags;
1570 u32 tmp_reg;
1571
1572 next = buf;
1573 size = PAGE_SIZE;
1574 spin_lock_irqsave(&dev->lock, flags);
1575
1576 /* driver basic information */
1577 t = scnprintf(next, size,
1578 DRIVER_DESC "\n"
1579 "%s version: %s\n"
1580 "Gadget driver: %s\n\n",
1581 driver_name, DRIVER_VERSION,
1582 dev->driver ? dev->driver->driver.name : "(none)");
1583 size -= t;
1584 next += t;
1585
1586 /* device registers */
1587 tmp_reg = readl(&dev->op_regs->usbcmd);
1588 t = scnprintf(next, size,
1589 "USBCMD reg:\n"
1590 "SetupTW: %d\n"
1591 "Run/Stop: %s\n\n",
1592 (tmp_reg & CMD_SUTW) ? 1 : 0,
1593 (tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
1594 size -= t;
1595 next += t;
1596
1597 tmp_reg = readl(&dev->op_regs->usbsts);
1598 t = scnprintf(next, size,
1599 "USB Status Reg:\n"
1600 "Device Suspend: %d\n"
1601 "Reset Received: %d\n"
1602 "System Error: %s\n"
1603 "USB Error Interrupt: %s\n\n",
1604 (tmp_reg & STS_SLI) ? 1 : 0,
1605 (tmp_reg & STS_URI) ? 1 : 0,
1606 (tmp_reg & STS_SEI) ? "Error" : "No error",
1607 (tmp_reg & STS_UEI) ? "Error detected" : "No error");
1608 size -= t;
1609 next += t;
1610
1611 tmp_reg = readl(&dev->op_regs->usbintr);
1612 t = scnprintf(next, size,
1613 "USB Intrrupt Enable Reg:\n"
1614 "Sleep Enable: %d\n"
1615 "SOF Received Enable: %d\n"
1616 "Reset Enable: %d\n"
1617 "System Error Enable: %d\n"
1618 "Port Change Dectected Enable: %d\n"
1619 "USB Error Intr Enable: %d\n"
1620 "USB Intr Enable: %d\n\n",
1621 (tmp_reg & INTR_SLE) ? 1 : 0,
1622 (tmp_reg & INTR_SRE) ? 1 : 0,
1623 (tmp_reg & INTR_URE) ? 1 : 0,
1624 (tmp_reg & INTR_SEE) ? 1 : 0,
1625 (tmp_reg & INTR_PCE) ? 1 : 0,
1626 (tmp_reg & INTR_UEE) ? 1 : 0,
1627 (tmp_reg & INTR_UE) ? 1 : 0);
1628 size -= t;
1629 next += t;
1630
1631 tmp_reg = readl(&dev->op_regs->frindex);
1632 t = scnprintf(next, size,
1633 "USB Frame Index Reg:\n"
1634 "Frame Number is 0x%08x\n\n",
1635 (tmp_reg & FRINDEX_MASK));
1636 size -= t;
1637 next += t;
1638
1639 tmp_reg = readl(&dev->op_regs->deviceaddr);
1640 t = scnprintf(next, size,
1641 "USB Device Address Reg:\n"
1642 "Device Addr is 0x%x\n\n",
1643 USBADR(tmp_reg));
1644 size -= t;
1645 next += t;
1646
1647 tmp_reg = readl(&dev->op_regs->endpointlistaddr);
1648 t = scnprintf(next, size,
1649 "USB Endpoint List Address Reg:\n"
1650 "Endpoint List Pointer is 0x%x\n\n",
1651 EPBASE(tmp_reg));
1652 size -= t;
1653 next += t;
1654
1655 tmp_reg = readl(&dev->op_regs->portsc1);
1656 t = scnprintf(next, size,
1657 "USB Port Status & Control Reg:\n"
1658 "Port Reset: %s\n"
1659 "Port Suspend Mode: %s\n"
1660 "Over-current Change: %s\n"
1661 "Port Enable/Disable Change: %s\n"
1662 "Port Enabled/Disabled: %s\n"
1663 "Current Connect Status: %s\n\n",
1664 (tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
1665 (tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
1666 (tmp_reg & PORTS_OCC) ? "Detected" : "No",
1667 (tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
1668 (tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
1669 (tmp_reg & PORTS_CCS) ? "Attached" : "Not Attached");
1670 size -= t;
1671 next += t;
1672
1673 tmp_reg = readl(&dev->op_regs->devlc);
1674 t = scnprintf(next, size,
1675 "Device LPM Control Reg:\n"
1676 "Parallel Transceiver : %d\n"
1677 "Serial Transceiver : %d\n"
1678 "Port Speed: %s\n"
1679 "Port Force Full Speed Connenct: %s\n"
1680 "PHY Low Power Suspend Clock Disable: %s\n"
1681 "BmAttributes: %d\n\n",
1682 LPM_PTS(tmp_reg),
1683 (tmp_reg & LPM_STS) ? 1 : 0,
1684 ({
1685 char *s;
1686 switch (LPM_PSPD(tmp_reg)) {
1687 case LPM_SPEED_FULL:
1688 s = "Full Speed"; break;
1689 case LPM_SPEED_LOW:
1690 s = "Low Speed"; break;
1691 case LPM_SPEED_HIGH:
1692 s = "High Speed"; break;
1693 default:
1694 s = "Unknown Speed"; break;
1695 }
1696 s;
1697 }),
1698 (tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
1699 (tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
1700 LPM_BA(tmp_reg));
1701 size -= t;
1702 next += t;
1703
1704 tmp_reg = readl(&dev->op_regs->usbmode);
1705 t = scnprintf(next, size,
1706 "USB Mode Reg:\n"
1707 "Controller Mode is : %s\n\n", ({
1708 char *s;
1709 switch (MODE_CM(tmp_reg)) {
1710 case MODE_IDLE:
1711 s = "Idle"; break;
1712 case MODE_DEVICE:
1713 s = "Device Controller"; break;
1714 case MODE_HOST:
1715 s = "Host Controller"; break;
1716 default:
1717 s = "None"; break;
1718 }
1719 s;
1720 }));
1721 size -= t;
1722 next += t;
1723
1724 tmp_reg = readl(&dev->op_regs->endptsetupstat);
1725 t = scnprintf(next, size,
1726 "Endpoint Setup Status Reg:\n"
1727 "SETUP on ep 0x%04x\n\n",
1728 tmp_reg & SETUPSTAT_MASK);
1729 size -= t;
1730 next += t;
1731
1732 for (i = 0; i < dev->ep_max / 2; i++) {
1733 tmp_reg = readl(&dev->op_regs->endptctrl[i]);
1734 t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
1735 i, tmp_reg);
1736 size -= t;
1737 next += t;
1738 }
1739 tmp_reg = readl(&dev->op_regs->endptprime);
1740 t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
1741 size -= t;
1742 next += t;
1743
1744 /* langwell_udc, langwell_ep, langwell_request structure information */
1745 ep = &dev->ep[0];
1746 t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
1747 ep->ep.name, ep->ep.maxpacket, ep->ep_num);
1748 size -= t;
1749 next += t;
1750
1751 if (list_empty(&ep->queue)) {
1752 t = scnprintf(next, size, "its req queue is empty\n\n");
1753 size -= t;
1754 next += t;
1755 } else {
1756 list_for_each_entry(req, &ep->queue, queue) {
1757 t = scnprintf(next, size,
1758 "req %p actual 0x%x length 0x%x buf %p\n",
1759 &req->req, req->req.actual,
1760 req->req.length, req->req.buf);
1761 size -= t;
1762 next += t;
1763 }
1764 }
1765 /* other gadget->eplist ep */
1766 list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
1767 if (ep->desc) {
1768 t = scnprintf(next, size,
1769 "\n%s MaxPacketSize: 0x%x, "
1770 "ep_num: %d\n",
1771 ep->ep.name, ep->ep.maxpacket,
1772 ep->ep_num);
1773 size -= t;
1774 next += t;
1775
1776 if (list_empty(&ep->queue)) {
1777 t = scnprintf(next, size,
1778 "its req queue is empty\n\n");
1779 size -= t;
1780 next += t;
1781 } else {
1782 list_for_each_entry(req, &ep->queue, queue) {
1783 t = scnprintf(next, size,
1784 "req %p actual 0x%x length "
1785 "0x%x buf %p\n",
1786 &req->req, req->req.actual,
1787 req->req.length, req->req.buf);
1788 size -= t;
1789 next += t;
1790 }
1791 }
1792 }
1793 }
1794
1795 spin_unlock_irqrestore(&dev->lock, flags);
1796 return PAGE_SIZE - size;
1797}
1798static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
1799
1800
1801/*-------------------------------------------------------------------------*/
1802
1803/*
1804 * when a driver is successfully registered, it will receive
1805 * control requests including set_configuration(), which enables
1806 * non-control requests. then usb traffic follows until a
1807 * disconnect is reported. then a host may connect again, or
1808 * the driver might get unbound.
1809 */
1810
1811int usb_gadget_register_driver(struct usb_gadget_driver *driver)
1812{
1813 struct langwell_udc *dev = the_controller;
1814 unsigned long flags;
1815 int retval;
1816
1817 if (!dev)
1818 return -ENODEV;
1819
1820 DBG(dev, "---> %s()\n", __func__);
1821
1822 if (dev->driver)
1823 return -EBUSY;
1824
1825 spin_lock_irqsave(&dev->lock, flags);
1826
1827 /* hook up the driver ... */
1828 driver->driver.bus = NULL;
1829 dev->driver = driver;
1830 dev->gadget.dev.driver = &driver->driver;
1831
1832 spin_unlock_irqrestore(&dev->lock, flags);
1833
1834 retval = driver->bind(&dev->gadget);
1835 if (retval) {
1836 DBG(dev, "bind to driver %s --> %d\n",
1837 driver->driver.name, retval);
1838 dev->driver = NULL;
1839 dev->gadget.dev.driver = NULL;
1840 return retval;
1841 }
1842
1843 retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
1844 if (retval)
1845 goto err_unbind;
1846
1847 dev->usb_state = USB_STATE_ATTACHED;
1848 dev->ep0_state = WAIT_FOR_SETUP;
1849 dev->ep0_dir = USB_DIR_OUT;
1850
1851 /* enable interrupt and set controller to run state */
1852 if (dev->got_irq)
1853 langwell_udc_start(dev);
1854
1855 VDBG(dev, "After langwell_udc_start(), print all registers:\n");
1856#ifdef VERBOSE
1857 print_all_registers(dev);
1858#endif
1859
1860 INFO(dev, "register driver: %s\n", driver->driver.name);
1861 VDBG(dev, "<--- %s()\n", __func__);
1862 return 0;
1863
1864err_unbind:
1865 driver->unbind(&dev->gadget);
1866 dev->gadget.dev.driver = NULL;
1867 dev->driver = NULL;
1868
1869 DBG(dev, "<--- %s()\n", __func__);
1870 return retval;
1871}
1872EXPORT_SYMBOL(usb_gadget_register_driver);
1873
1874
1875/* unregister gadget driver */
1876int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
1877{
1878 struct langwell_udc *dev = the_controller;
1879 unsigned long flags;
1880
1881 if (!dev)
1882 return -ENODEV;
1883
1884 DBG(dev, "---> %s()\n", __func__);
1885
1886 if (unlikely(!driver || !driver->bind || !driver->unbind))
1887 return -EINVAL;
1888
1889 /* unbind OTG transceiver */
1890 if (dev->transceiver)
1891 (void)otg_set_peripheral(dev->transceiver, 0);
1892
1893 /* disable interrupt and set controller to stop state */
1894 langwell_udc_stop(dev);
1895
1896 dev->usb_state = USB_STATE_ATTACHED;
1897 dev->ep0_state = WAIT_FOR_SETUP;
1898 dev->ep0_dir = USB_DIR_OUT;
1899
1900 spin_lock_irqsave(&dev->lock, flags);
1901
1902 /* stop all usb activities */
1903 dev->gadget.speed = USB_SPEED_UNKNOWN;
1904 stop_activity(dev, driver);
1905 spin_unlock_irqrestore(&dev->lock, flags);
1906
1907 /* unbind gadget driver */
1908 driver->unbind(&dev->gadget);
1909 dev->gadget.dev.driver = NULL;
1910 dev->driver = NULL;
1911
1912 device_remove_file(&dev->pdev->dev, &dev_attr_function);
1913
1914 INFO(dev, "unregistered driver '%s'\n", driver->driver.name);
1915 DBG(dev, "<--- %s()\n", __func__);
1916 return 0;
1917}
1918EXPORT_SYMBOL(usb_gadget_unregister_driver);
1919
1920
1921/*-------------------------------------------------------------------------*/
1922
1923/*
1924 * setup tripwire is used as a semaphore to ensure that the setup data
1925 * payload is extracted from a dQH without being corrupted
1926 */
1927static void setup_tripwire(struct langwell_udc *dev)
1928{
1929 u32 usbcmd,
1930 endptsetupstat;
1931 unsigned long timeout;
1932 struct langwell_dqh *dqh;
1933
1934 VDBG(dev, "---> %s()\n", __func__);
1935
1936 /* ep0 OUT dQH */
1937 dqh = &dev->ep_dqh[EP_DIR_OUT];
1938
1939 /* Write-Clear endptsetupstat */
1940 endptsetupstat = readl(&dev->op_regs->endptsetupstat);
1941 writel(endptsetupstat, &dev->op_regs->endptsetupstat);
1942
1943 /* wait until endptsetupstat is cleared */
1944 timeout = jiffies + SETUPSTAT_TIMEOUT;
1945 while (readl(&dev->op_regs->endptsetupstat)) {
1946 if (time_after(jiffies, timeout)) {
1947 ERROR(dev, "setup_tripwire timeout\n");
1948 break;
1949 }
1950 cpu_relax();
1951 }
1952
1953 /* while a hazard exists when setup packet arrives */
1954 do {
1955 /* set setup tripwire bit */
1956 usbcmd = readl(&dev->op_regs->usbcmd);
1957 writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
1958
1959 /* copy the setup packet to local buffer */
1960 memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
1961 } while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
1962
1963 /* Write-Clear setup tripwire bit */
1964 usbcmd = readl(&dev->op_regs->usbcmd);
1965 writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
1966
1967 VDBG(dev, "<--- %s()\n", __func__);
1968}
1969
1970
1971/* protocol ep0 stall, will automatically be cleared on new transaction */
1972static void ep0_stall(struct langwell_udc *dev)
1973{
1974 u32 endptctrl;
1975
1976 VDBG(dev, "---> %s()\n", __func__);
1977
1978 /* set TX and RX to stall */
1979 endptctrl = readl(&dev->op_regs->endptctrl[0]);
1980 endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
1981 writel(endptctrl, &dev->op_regs->endptctrl[0]);
1982
1983 /* update ep0 state */
1984 dev->ep0_state = WAIT_FOR_SETUP;
1985 dev->ep0_dir = USB_DIR_OUT;
1986
1987 VDBG(dev, "<--- %s()\n", __func__);
1988}
1989
1990
1991/* PRIME a status phase for ep0 */
1992static int prime_status_phase(struct langwell_udc *dev, int dir)
1993{
1994 struct langwell_request *req;
1995 struct langwell_ep *ep;
1996 int status = 0;
1997
1998 VDBG(dev, "---> %s()\n", __func__);
1999
2000 if (dir == EP_DIR_IN)
2001 dev->ep0_dir = USB_DIR_IN;
2002 else
2003 dev->ep0_dir = USB_DIR_OUT;
2004
2005 ep = &dev->ep[0];
2006 dev->ep0_state = WAIT_FOR_OUT_STATUS;
2007
2008 req = dev->status_req;
2009
2010 req->ep = ep;
2011 req->req.length = 0;
2012 req->req.status = -EINPROGRESS;
2013 req->req.actual = 0;
2014 req->req.complete = NULL;
2015 req->dtd_count = 0;
2016
2017 if (!req_to_dtd(req))
2018 status = queue_dtd(ep, req);
2019 else
2020 return -ENOMEM;
2021
2022 if (status)
2023 ERROR(dev, "can't queue ep0 status request\n");
2024
2025 list_add_tail(&req->queue, &ep->queue);
2026
2027 VDBG(dev, "<--- %s()\n", __func__);
2028 return status;
2029}
2030
2031
2032/* SET_ADDRESS request routine */
2033static void set_address(struct langwell_udc *dev, u16 value,
2034 u16 index, u16 length)
2035{
2036 VDBG(dev, "---> %s()\n", __func__);
2037
2038 /* save the new address to device struct */
2039 dev->dev_addr = (u8) value;
2040 VDBG(dev, "dev->dev_addr = %d\n", dev->dev_addr);
2041
2042 /* update usb state */
2043 dev->usb_state = USB_STATE_ADDRESS;
2044
2045 /* STATUS phase */
2046 if (prime_status_phase(dev, EP_DIR_IN))
2047 ep0_stall(dev);
2048
2049 VDBG(dev, "<--- %s()\n", __func__);
2050}
2051
2052
2053/* return endpoint by windex */
2054static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
2055 u16 wIndex)
2056{
2057 struct langwell_ep *ep;
2058 VDBG(dev, "---> %s()\n", __func__);
2059
2060 if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
2061 return &dev->ep[0];
2062
2063 list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
2064 u8 bEndpointAddress;
2065 if (!ep->desc)
2066 continue;
2067
2068 bEndpointAddress = ep->desc->bEndpointAddress;
2069 if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
2070 continue;
2071
2072 if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
2073 == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
2074 return ep;
2075 }
2076
2077 VDBG(dev, "<--- %s()\n", __func__);
2078 return NULL;
2079}
2080
2081
2082/* return whether endpoint is stalled, 0: not stalled; 1: stalled */
2083static int ep_is_stall(struct langwell_ep *ep)
2084{
2085 struct langwell_udc *dev = ep->dev;
2086 u32 endptctrl;
2087 int retval;
2088
2089 VDBG(dev, "---> %s()\n", __func__);
2090
2091 endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
2092 if (is_in(ep))
2093 retval = endptctrl & EPCTRL_TXS ? 1 : 0;
2094 else
2095 retval = endptctrl & EPCTRL_RXS ? 1 : 0;
2096
2097 VDBG(dev, "<--- %s()\n", __func__);
2098 return retval;
2099}
2100
2101
2102/* GET_STATUS request routine */
2103static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
2104 u16 index, u16 length)
2105{
2106 struct langwell_request *req;
2107 struct langwell_ep *ep;
2108 u16 status_data = 0; /* 16 bits cpu view status data */
2109 int status = 0;
2110
2111 VDBG(dev, "---> %s()\n", __func__);
2112
2113 ep = &dev->ep[0];
2114
2115 if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
2116 /* get device status */
2117 status_data = 1 << USB_DEVICE_SELF_POWERED;
2118 status_data |= dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
2119 } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
2120 /* get interface status */
2121 status_data = 0;
2122 } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
2123 /* get endpoint status */
2124 struct langwell_ep *epn;
2125 epn = get_ep_by_windex(dev, index);
2126 /* stall if endpoint doesn't exist */
2127 if (!epn)
2128 goto stall;
2129
2130 status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
2131 }
2132
2133 dev->ep0_dir = USB_DIR_IN;
2134
2135 /* borrow the per device status_req */
2136 req = dev->status_req;
2137
2138 /* fill in the reqest structure */
2139 *((u16 *) req->req.buf) = cpu_to_le16(status_data);
2140 req->ep = ep;
2141 req->req.length = 2;
2142 req->req.status = -EINPROGRESS;
2143 req->req.actual = 0;
2144 req->req.complete = NULL;
2145 req->dtd_count = 0;
2146
2147 /* prime the data phase */
2148 if (!req_to_dtd(req))
2149 status = queue_dtd(ep, req);
2150 else /* no mem */
2151 goto stall;
2152
2153 if (status) {
2154 ERROR(dev, "response error on GET_STATUS request\n");
2155 goto stall;
2156 }
2157
2158 list_add_tail(&req->queue, &ep->queue);
2159 dev->ep0_state = DATA_STATE_XMIT;
2160
2161 VDBG(dev, "<--- %s()\n", __func__);
2162 return;
2163stall:
2164 ep0_stall(dev);
2165 VDBG(dev, "<--- %s()\n", __func__);
2166}
2167
2168
2169/* setup packet interrupt handler */
2170static void handle_setup_packet(struct langwell_udc *dev,
2171 struct usb_ctrlrequest *setup)
2172{
2173 u16 wValue = le16_to_cpu(setup->wValue);
2174 u16 wIndex = le16_to_cpu(setup->wIndex);
2175 u16 wLength = le16_to_cpu(setup->wLength);
2176
2177 VDBG(dev, "---> %s()\n", __func__);
2178
2179 /* ep0 fifo flush */
2180 nuke(&dev->ep[0], -ESHUTDOWN);
2181
2182 DBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
2183 setup->bRequestType, setup->bRequest,
2184 wValue, wIndex, wLength);
2185
2186 /* RNDIS gadget delegate */
2187 if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
2188 /* USB_CDC_SEND_ENCAPSULATED_COMMAND */
2189 goto delegate;
2190 }
2191
2192 /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
2193 if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
2194 /* USB_CDC_GET_ENCAPSULATED_RESPONSE */
2195 goto delegate;
2196 }
2197
2198 /* We process some stardard setup requests here */
2199 switch (setup->bRequest) {
2200 case USB_REQ_GET_STATUS:
2201 DBG(dev, "SETUP: USB_REQ_GET_STATUS\n");
2202 /* get status, DATA and STATUS phase */
2203 if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
2204 != (USB_DIR_IN | USB_TYPE_STANDARD))
2205 break;
2206 get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
2207 goto end;
2208
2209 case USB_REQ_SET_ADDRESS:
2210 DBG(dev, "SETUP: USB_REQ_SET_ADDRESS\n");
2211 /* STATUS phase */
2212 if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
2213 | USB_RECIP_DEVICE))
2214 break;
2215 set_address(dev, wValue, wIndex, wLength);
2216 goto end;
2217
2218 case USB_REQ_CLEAR_FEATURE:
2219 case USB_REQ_SET_FEATURE:
2220 /* STATUS phase */
2221 {
2222 int rc = -EOPNOTSUPP;
2223 if (setup->bRequest == USB_REQ_SET_FEATURE)
2224 DBG(dev, "SETUP: USB_REQ_SET_FEATURE\n");
2225 else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
2226 DBG(dev, "SETUP: USB_REQ_CLEAR_FEATURE\n");
2227
2228 if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
2229 == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
2230 struct langwell_ep *epn;
2231 epn = get_ep_by_windex(dev, wIndex);
2232 /* stall if endpoint doesn't exist */
2233 if (!epn) {
2234 ep0_stall(dev);
2235 goto end;
2236 }
2237
2238 if (wValue != 0 || wLength != 0
2239 || epn->ep_num > dev->ep_max)
2240 break;
2241
2242 spin_unlock(&dev->lock);
2243 rc = langwell_ep_set_halt(&epn->ep,
2244 (setup->bRequest == USB_REQ_SET_FEATURE)
2245 ? 1 : 0);
2246 spin_lock(&dev->lock);
2247
2248 } else if ((setup->bRequestType & (USB_RECIP_MASK
2249 | USB_TYPE_MASK)) == (USB_RECIP_DEVICE
2250 | USB_TYPE_STANDARD)) {
2251 if (!gadget_is_otg(&dev->gadget))
2252 break;
2253 else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
2254 dev->gadget.b_hnp_enable = 1;
2255#ifdef OTG_TRANSCEIVER
2256 if (!dev->lotg->otg.default_a)
2257 dev->lotg->hsm.b_hnp_enable = 1;
2258#endif
2259 } else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
2260 dev->gadget.a_hnp_support = 1;
2261 else if (setup->bRequest ==
2262 USB_DEVICE_A_ALT_HNP_SUPPORT)
2263 dev->gadget.a_alt_hnp_support = 1;
2264 else
2265 break;
2266 rc = 0;
2267 } else
2268 break;
2269
2270 if (rc == 0) {
2271 if (prime_status_phase(dev, EP_DIR_IN))
2272 ep0_stall(dev);
2273 }
2274 goto end;
2275 }
2276
2277 case USB_REQ_GET_DESCRIPTOR:
2278 DBG(dev, "SETUP: USB_REQ_GET_DESCRIPTOR\n");
2279 goto delegate;
2280
2281 case USB_REQ_SET_DESCRIPTOR:
2282 DBG(dev, "SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
2283 goto delegate;
2284
2285 case USB_REQ_GET_CONFIGURATION:
2286 DBG(dev, "SETUP: USB_REQ_GET_CONFIGURATION\n");
2287 goto delegate;
2288
2289 case USB_REQ_SET_CONFIGURATION:
2290 DBG(dev, "SETUP: USB_REQ_SET_CONFIGURATION\n");
2291 goto delegate;
2292
2293 case USB_REQ_GET_INTERFACE:
2294 DBG(dev, "SETUP: USB_REQ_GET_INTERFACE\n");
2295 goto delegate;
2296
2297 case USB_REQ_SET_INTERFACE:
2298 DBG(dev, "SETUP: USB_REQ_SET_INTERFACE\n");
2299 goto delegate;
2300
2301 case USB_REQ_SYNCH_FRAME:
2302 DBG(dev, "SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
2303 goto delegate;
2304
2305 default:
2306 /* delegate USB standard requests to the gadget driver */
2307 goto delegate;
2308delegate:
2309 /* USB requests handled by gadget */
2310 if (wLength) {
2311 /* DATA phase from gadget, STATUS phase from udc */
2312 dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
2313 ? USB_DIR_IN : USB_DIR_OUT;
2314 VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
2315 dev->ep0_dir, wLength);
2316 spin_unlock(&dev->lock);
2317 if (dev->driver->setup(&dev->gadget,
2318 &dev->local_setup_buff) < 0)
2319 ep0_stall(dev);
2320 spin_lock(&dev->lock);
2321 dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
2322 ? DATA_STATE_XMIT : DATA_STATE_RECV;
2323 } else {
2324 /* no DATA phase, IN STATUS phase from gadget */
2325 dev->ep0_dir = USB_DIR_IN;
2326 VDBG(dev, "dev->ep0_dir = 0x%x, wLength = %d\n",
2327 dev->ep0_dir, wLength);
2328 spin_unlock(&dev->lock);
2329 if (dev->driver->setup(&dev->gadget,
2330 &dev->local_setup_buff) < 0)
2331 ep0_stall(dev);
2332 spin_lock(&dev->lock);
2333 dev->ep0_state = WAIT_FOR_OUT_STATUS;
2334 }
2335 break;
2336 }
2337end:
2338 VDBG(dev, "<--- %s()\n", __func__);
2339 return;
2340}
2341
2342
2343/* transfer completion, process endpoint request and free the completed dTDs
2344 * for this request
2345 */
2346static int process_ep_req(struct langwell_udc *dev, int index,
2347 struct langwell_request *curr_req)
2348{
2349 struct langwell_dtd *curr_dtd;
2350 struct langwell_dqh *curr_dqh;
2351 int td_complete, actual, remaining_length;
2352 int i, dir;
2353 u8 dtd_status = 0;
2354 int retval = 0;
2355
2356 curr_dqh = &dev->ep_dqh[index];
2357 dir = index % 2;
2358
2359 curr_dtd = curr_req->head;
2360 td_complete = 0;
2361 actual = curr_req->req.length;
2362
2363 VDBG(dev, "---> %s()\n", __func__);
2364
2365 for (i = 0; i < curr_req->dtd_count; i++) {
2366 remaining_length = le16_to_cpu(curr_dtd->dtd_total);
2367 actual -= remaining_length;
2368
2369 /* command execution states by dTD */
2370 dtd_status = curr_dtd->dtd_status;
2371
2372 if (!dtd_status) {
2373 /* transfers completed successfully */
2374 if (!remaining_length) {
2375 td_complete++;
2376 VDBG(dev, "dTD transmitted successfully\n");
2377 } else {
2378 if (dir) {
2379 VDBG(dev, "TX dTD remains data\n");
2380 retval = -EPROTO;
2381 break;
2382
2383 } else {
2384 td_complete++;
2385 break;
2386 }
2387 }
2388 } else {
2389 /* transfers completed with errors */
2390 if (dtd_status & DTD_STS_ACTIVE) {
2391 DBG(dev, "request not completed\n");
2392 retval = 1;
2393 return retval;
2394 } else if (dtd_status & DTD_STS_HALTED) {
2395 ERROR(dev, "dTD error %08x dQH[%d]\n",
2396 dtd_status, index);
2397 /* clear the errors and halt condition */
2398 curr_dqh->dtd_status = 0;
2399 retval = -EPIPE;
2400 break;
2401 } else if (dtd_status & DTD_STS_DBE) {
2402 DBG(dev, "data buffer (overflow) error\n");
2403 retval = -EPROTO;
2404 break;
2405 } else if (dtd_status & DTD_STS_TRE) {
2406 DBG(dev, "transaction(ISO) error\n");
2407 retval = -EILSEQ;
2408 break;
2409 } else
2410 ERROR(dev, "unknown error (0x%x)!\n",
2411 dtd_status);
2412 }
2413
2414 if (i != curr_req->dtd_count - 1)
2415 curr_dtd = (struct langwell_dtd *)
2416 curr_dtd->next_dtd_virt;
2417 }
2418
2419 if (retval)
2420 return retval;
2421
2422 curr_req->req.actual = actual;
2423
2424 VDBG(dev, "<--- %s()\n", __func__);
2425 return 0;
2426}
2427
2428
2429/* complete DATA or STATUS phase of ep0 prime status phase if needed */
2430static void ep0_req_complete(struct langwell_udc *dev,
2431 struct langwell_ep *ep0, struct langwell_request *req)
2432{
2433 u32 new_addr;
2434 VDBG(dev, "---> %s()\n", __func__);
2435
2436 if (dev->usb_state == USB_STATE_ADDRESS) {
2437 /* set the new address */
2438 new_addr = (u32)dev->dev_addr;
2439 writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
2440
2441 new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
2442 VDBG(dev, "new_addr = %d\n", new_addr);
2443 }
2444
2445 done(ep0, req, 0);
2446
2447 switch (dev->ep0_state) {
2448 case DATA_STATE_XMIT:
2449 /* receive status phase */
2450 if (prime_status_phase(dev, EP_DIR_OUT))
2451 ep0_stall(dev);
2452 break;
2453 case DATA_STATE_RECV:
2454 /* send status phase */
2455 if (prime_status_phase(dev, EP_DIR_IN))
2456 ep0_stall(dev);
2457 break;
2458 case WAIT_FOR_OUT_STATUS:
2459 dev->ep0_state = WAIT_FOR_SETUP;
2460 break;
2461 case WAIT_FOR_SETUP:
2462 ERROR(dev, "unexpect ep0 packets\n");
2463 break;
2464 default:
2465 ep0_stall(dev);
2466 break;
2467 }
2468
2469 VDBG(dev, "<--- %s()\n", __func__);
2470}
2471
2472
2473/* USB transfer completion interrupt */
2474static void handle_trans_complete(struct langwell_udc *dev)
2475{
2476 u32 complete_bits;
2477 int i, ep_num, dir, bit_mask, status;
2478 struct langwell_ep *epn;
2479 struct langwell_request *curr_req, *temp_req;
2480
2481 VDBG(dev, "---> %s()\n", __func__);
2482
2483 complete_bits = readl(&dev->op_regs->endptcomplete);
2484 VDBG(dev, "endptcomplete register: 0x%08x\n", complete_bits);
2485
2486 /* Write-Clear the bits in endptcomplete register */
2487 writel(complete_bits, &dev->op_regs->endptcomplete);
2488
2489 if (!complete_bits) {
2490 DBG(dev, "complete_bits = 0\n");
2491 goto done;
2492 }
2493
2494 for (i = 0; i < dev->ep_max; i++) {
2495 ep_num = i / 2;
2496 dir = i % 2;
2497
2498 bit_mask = 1 << (ep_num + 16 * dir);
2499
2500 if (!(complete_bits & bit_mask))
2501 continue;
2502
2503 /* ep0 */
2504 if (i == 1)
2505 epn = &dev->ep[0];
2506 else
2507 epn = &dev->ep[i];
2508
2509 if (epn->name == NULL) {
2510 WARNING(dev, "invalid endpoint\n");
2511 continue;
2512 }
2513
2514 if (i < 2)
2515 /* ep0 in and out */
2516 DBG(dev, "%s-%s transfer completed\n",
2517 epn->name,
2518 is_in(epn) ? "in" : "out");
2519 else
2520 DBG(dev, "%s transfer completed\n", epn->name);
2521
2522 /* process the req queue until an uncomplete request */
2523 list_for_each_entry_safe(curr_req, temp_req,
2524 &epn->queue, queue) {
2525 status = process_ep_req(dev, i, curr_req);
2526 VDBG(dev, "%s req status: %d\n", epn->name, status);
2527
2528 if (status)
2529 break;
2530
2531 /* write back status to req */
2532 curr_req->req.status = status;
2533
2534 /* ep0 request completion */
2535 if (ep_num == 0) {
2536 ep0_req_complete(dev, epn, curr_req);
2537 break;
2538 } else {
2539 done(epn, curr_req, status);
2540 }
2541 }
2542 }
2543done:
2544 VDBG(dev, "<--- %s()\n", __func__);
2545 return;
2546}
2547
2548
2549/* port change detect interrupt handler */
2550static void handle_port_change(struct langwell_udc *dev)
2551{
2552 u32 portsc1, devlc;
2553 u32 speed;
2554
2555 VDBG(dev, "---> %s()\n", __func__);
2556
2557 if (dev->bus_reset)
2558 dev->bus_reset = 0;
2559
2560 portsc1 = readl(&dev->op_regs->portsc1);
2561 devlc = readl(&dev->op_regs->devlc);
2562 VDBG(dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
2563 portsc1, devlc);
2564
2565 /* bus reset is finished */
2566 if (!(portsc1 & PORTS_PR)) {
2567 /* get the speed */
2568 speed = LPM_PSPD(devlc);
2569 switch (speed) {
2570 case LPM_SPEED_HIGH:
2571 dev->gadget.speed = USB_SPEED_HIGH;
2572 break;
2573 case LPM_SPEED_FULL:
2574 dev->gadget.speed = USB_SPEED_FULL;
2575 break;
2576 case LPM_SPEED_LOW:
2577 dev->gadget.speed = USB_SPEED_LOW;
2578 break;
2579 default:
2580 dev->gadget.speed = USB_SPEED_UNKNOWN;
2581 break;
2582 }
2583 VDBG(dev, "speed = %d, dev->gadget.speed = %d\n",
2584 speed, dev->gadget.speed);
2585 }
2586
2587 /* LPM L0 to L1 */
2588 if (dev->lpm && dev->lpm_state == LPM_L0)
2589 if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
2590 INFO(dev, "LPM L0 to L1\n");
2591 dev->lpm_state = LPM_L1;
2592 }
2593
2594 /* LPM L1 to L0, force resume or remote wakeup finished */
2595 if (dev->lpm && dev->lpm_state == LPM_L1)
2596 if (!(portsc1 & PORTS_SUSP)) {
2597 if (portsc1 & PORTS_SLP)
2598 INFO(dev, "LPM L1 to L0, force resume\n");
2599 else
2600 INFO(dev, "LPM L1 to L0, remote wakeup\n");
2601
2602 dev->lpm_state = LPM_L0;
2603 }
2604
2605 /* update USB state */
2606 if (!dev->resume_state)
2607 dev->usb_state = USB_STATE_DEFAULT;
2608
2609 VDBG(dev, "<--- %s()\n", __func__);
2610}
2611
2612
2613/* USB reset interrupt handler */
2614static void handle_usb_reset(struct langwell_udc *dev)
2615{
2616 u32 deviceaddr,
2617 endptsetupstat,
2618 endptcomplete;
2619 unsigned long timeout;
2620
2621 VDBG(dev, "---> %s()\n", __func__);
2622
2623 /* Write-Clear the device address */
2624 deviceaddr = readl(&dev->op_regs->deviceaddr);
2625 writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
2626
2627 dev->dev_addr = 0;
2628
2629 /* clear usb state */
2630 dev->resume_state = 0;
2631
2632 /* LPM L1 to L0, reset */
2633 if (dev->lpm)
2634 dev->lpm_state = LPM_L0;
2635
2636 dev->ep0_dir = USB_DIR_OUT;
2637 dev->ep0_state = WAIT_FOR_SETUP;
2638 dev->remote_wakeup = 0; /* default to 0 on reset */
2639 dev->gadget.b_hnp_enable = 0;
2640 dev->gadget.a_hnp_support = 0;
2641 dev->gadget.a_alt_hnp_support = 0;
2642
2643 /* Write-Clear all the setup token semaphores */
2644 endptsetupstat = readl(&dev->op_regs->endptsetupstat);
2645 writel(endptsetupstat, &dev->op_regs->endptsetupstat);
2646
2647 /* Write-Clear all the endpoint complete status bits */
2648 endptcomplete = readl(&dev->op_regs->endptcomplete);
2649 writel(endptcomplete, &dev->op_regs->endptcomplete);
2650
2651 /* wait until all endptprime bits cleared */
2652 timeout = jiffies + PRIME_TIMEOUT;
2653 while (readl(&dev->op_regs->endptprime)) {
2654 if (time_after(jiffies, timeout)) {
2655 ERROR(dev, "USB reset timeout\n");
2656 break;
2657 }
2658 cpu_relax();
2659 }
2660
2661 /* write 1s to endptflush register to clear any primed buffers */
2662 writel((u32) ~0, &dev->op_regs->endptflush);
2663
2664 if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
2665 VDBG(dev, "USB bus reset\n");
2666 /* bus is reseting */
2667 dev->bus_reset = 1;
2668
2669 /* reset all the queues, stop all USB activities */
2670 stop_activity(dev, dev->driver);
2671 dev->usb_state = USB_STATE_DEFAULT;
2672 } else {
2673 VDBG(dev, "device controller reset\n");
2674 /* controller reset */
2675 langwell_udc_reset(dev);
2676
2677 /* reset all the queues, stop all USB activities */
2678 stop_activity(dev, dev->driver);
2679
2680 /* reset ep0 dQH and endptctrl */
2681 ep0_reset(dev);
2682
2683 /* enable interrupt and set controller to run state */
2684 langwell_udc_start(dev);
2685
2686 dev->usb_state = USB_STATE_ATTACHED;
2687 }
2688
2689#ifdef OTG_TRANSCEIVER
2690 /* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */
2691 if (!dev->lotg->otg.default_a)
2692 dev->lotg->hsm.b_hnp_enable = 0;
2693#endif
2694
2695 VDBG(dev, "<--- %s()\n", __func__);
2696}
2697
2698
2699/* USB bus suspend/resume interrupt */
2700static void handle_bus_suspend(struct langwell_udc *dev)
2701{
2702 u32 devlc;
2703 DBG(dev, "---> %s()\n", __func__);
2704
2705 dev->resume_state = dev->usb_state;
2706 dev->usb_state = USB_STATE_SUSPENDED;
2707
2708#ifdef OTG_TRANSCEIVER
2709 if (dev->lotg->otg.default_a) {
2710 if (dev->lotg->hsm.b_bus_suspend_vld == 1) {
2711 dev->lotg->hsm.b_bus_suspend = 1;
2712 /* notify transceiver the state changes */
2713 if (spin_trylock(&dev->lotg->wq_lock)) {
2714 langwell_update_transceiver();
2715 spin_unlock(&dev->lotg->wq_lock);
2716 }
2717 }
2718 dev->lotg->hsm.b_bus_suspend_vld++;
2719 } else {
2720 if (!dev->lotg->hsm.a_bus_suspend) {
2721 dev->lotg->hsm.a_bus_suspend = 1;
2722 /* notify transceiver the state changes */
2723 if (spin_trylock(&dev->lotg->wq_lock)) {
2724 langwell_update_transceiver();
2725 spin_unlock(&dev->lotg->wq_lock);
2726 }
2727 }
2728 }
2729#endif
2730
2731 /* report suspend to the driver */
2732 if (dev->driver) {
2733 if (dev->driver->suspend) {
2734 spin_unlock(&dev->lock);
2735 dev->driver->suspend(&dev->gadget);
2736 spin_lock(&dev->lock);
2737 DBG(dev, "suspend %s\n", dev->driver->driver.name);
2738 }
2739 }
2740
2741 /* enter PHY low power suspend */
2742 devlc = readl(&dev->op_regs->devlc);
2743 VDBG(dev, "devlc = 0x%08x\n", devlc);
2744 devlc |= LPM_PHCD;
2745 writel(devlc, &dev->op_regs->devlc);
2746
2747 DBG(dev, "<--- %s()\n", __func__);
2748}
2749
2750
2751static void handle_bus_resume(struct langwell_udc *dev)
2752{
2753 u32 devlc;
2754 DBG(dev, "---> %s()\n", __func__);
2755
2756 dev->usb_state = dev->resume_state;
2757 dev->resume_state = 0;
2758
2759 /* exit PHY low power suspend */
2760 devlc = readl(&dev->op_regs->devlc);
2761 VDBG(dev, "devlc = 0x%08x\n", devlc);
2762 devlc &= ~LPM_PHCD;
2763 writel(devlc, &dev->op_regs->devlc);
2764
2765#ifdef OTG_TRANSCEIVER
2766 if (dev->lotg->otg.default_a == 0)
2767 dev->lotg->hsm.a_bus_suspend = 0;
2768#endif
2769
2770 /* report resume to the driver */
2771 if (dev->driver) {
2772 if (dev->driver->resume) {
2773 spin_unlock(&dev->lock);
2774 dev->driver->resume(&dev->gadget);
2775 spin_lock(&dev->lock);
2776 DBG(dev, "resume %s\n", dev->driver->driver.name);
2777 }
2778 }
2779
2780 DBG(dev, "<--- %s()\n", __func__);
2781}
2782
2783
2784/* USB device controller interrupt handler */
2785static irqreturn_t langwell_irq(int irq, void *_dev)
2786{
2787 struct langwell_udc *dev = _dev;
2788 u32 usbsts,
2789 usbintr,
2790 irq_sts,
2791 portsc1;
2792
2793 VDBG(dev, "---> %s()\n", __func__);
2794
2795 if (dev->stopped) {
2796 VDBG(dev, "handle IRQ_NONE\n");
2797 VDBG(dev, "<--- %s()\n", __func__);
2798 return IRQ_NONE;
2799 }
2800
2801 spin_lock(&dev->lock);
2802
2803 /* USB status */
2804 usbsts = readl(&dev->op_regs->usbsts);
2805
2806 /* USB interrupt enable */
2807 usbintr = readl(&dev->op_regs->usbintr);
2808
2809 irq_sts = usbsts & usbintr;
2810 VDBG(dev, "usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
2811 usbsts, usbintr, irq_sts);
2812
2813 if (!irq_sts) {
2814 VDBG(dev, "handle IRQ_NONE\n");
2815 VDBG(dev, "<--- %s()\n", __func__);
2816 spin_unlock(&dev->lock);
2817 return IRQ_NONE;
2818 }
2819
2820 /* Write-Clear interrupt status bits */
2821 writel(irq_sts, &dev->op_regs->usbsts);
2822
2823 /* resume from suspend */
2824 portsc1 = readl(&dev->op_regs->portsc1);
2825 if (dev->usb_state == USB_STATE_SUSPENDED)
2826 if (!(portsc1 & PORTS_SUSP))
2827 handle_bus_resume(dev);
2828
2829 /* USB interrupt */
2830 if (irq_sts & STS_UI) {
2831 VDBG(dev, "USB interrupt\n");
2832
2833 /* setup packet received from ep0 */
2834 if (readl(&dev->op_regs->endptsetupstat)
2835 & EP0SETUPSTAT_MASK) {
2836 VDBG(dev, "USB SETUP packet received interrupt\n");
2837 /* setup tripwire semaphone */
2838 setup_tripwire(dev);
2839 handle_setup_packet(dev, &dev->local_setup_buff);
2840 }
2841
2842 /* USB transfer completion */
2843 if (readl(&dev->op_regs->endptcomplete)) {
2844 VDBG(dev, "USB transfer completion interrupt\n");
2845 handle_trans_complete(dev);
2846 }
2847 }
2848
2849 /* SOF received interrupt (for ISO transfer) */
2850 if (irq_sts & STS_SRI) {
2851 /* FIXME */
2852 /* VDBG(dev, "SOF received interrupt\n"); */
2853 }
2854
2855 /* port change detect interrupt */
2856 if (irq_sts & STS_PCI) {
2857 VDBG(dev, "port change detect interrupt\n");
2858 handle_port_change(dev);
2859 }
2860
2861 /* suspend interrrupt */
2862 if (irq_sts & STS_SLI) {
2863 VDBG(dev, "suspend interrupt\n");
2864 handle_bus_suspend(dev);
2865 }
2866
2867 /* USB reset interrupt */
2868 if (irq_sts & STS_URI) {
2869 VDBG(dev, "USB reset interrupt\n");
2870 handle_usb_reset(dev);
2871 }
2872
2873 /* USB error or system error interrupt */
2874 if (irq_sts & (STS_UEI | STS_SEI)) {
2875 /* FIXME */
2876 WARNING(dev, "error IRQ, irq_sts: %x\n", irq_sts);
2877 }
2878
2879 spin_unlock(&dev->lock);
2880
2881 VDBG(dev, "<--- %s()\n", __func__);
2882 return IRQ_HANDLED;
2883}
2884
2885
2886/*-------------------------------------------------------------------------*/
2887
2888/* release device structure */
2889static void gadget_release(struct device *_dev)
2890{
2891 struct langwell_udc *dev = the_controller;
2892
2893 DBG(dev, "---> %s()\n", __func__);
2894
2895 complete(dev->done);
2896
2897 DBG(dev, "<--- %s()\n", __func__);
2898 kfree(dev);
2899}
2900
2901
2902/* tear down the binding between this driver and the pci device */
2903static void langwell_udc_remove(struct pci_dev *pdev)
2904{
2905 struct langwell_udc *dev = the_controller;
2906
2907 DECLARE_COMPLETION(done);
2908
2909 BUG_ON(dev->driver);
2910 DBG(dev, "---> %s()\n", __func__);
2911
2912 dev->done = &done;
2913
2914 /* free memory allocated in probe */
2915 if (dev->dtd_pool)
2916 dma_pool_destroy(dev->dtd_pool);
2917
2918 if (dev->status_req) {
2919 kfree(dev->status_req->req.buf);
2920 kfree(dev->status_req);
2921 }
2922
2923 if (dev->ep_dqh)
2924 dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
2925 dev->ep_dqh, dev->ep_dqh_dma);
2926
2927 kfree(dev->ep);
2928
2929 /* diable IRQ handler */
2930 if (dev->got_irq)
2931 free_irq(pdev->irq, dev);
2932
2933#ifndef OTG_TRANSCEIVER
2934 if (dev->cap_regs)
2935 iounmap(dev->cap_regs);
2936
2937 if (dev->region)
2938 release_mem_region(pci_resource_start(pdev, 0),
2939 pci_resource_len(pdev, 0));
2940
2941 if (dev->enabled)
2942 pci_disable_device(pdev);
2943#else
2944 if (dev->transceiver) {
2945 otg_put_transceiver(dev->transceiver);
2946 dev->transceiver = NULL;
2947 dev->lotg = NULL;
2948 }
2949#endif
2950
2951 dev->cap_regs = NULL;
2952
2953 INFO(dev, "unbind\n");
2954 DBG(dev, "<--- %s()\n", __func__);
2955
2956 device_unregister(&dev->gadget.dev);
2957 device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
2958
2959#ifndef OTG_TRANSCEIVER
2960 pci_set_drvdata(pdev, NULL);
2961#endif
2962
2963 /* free dev, wait for the release() finished */
2964 wait_for_completion(&done);
2965
2966 the_controller = NULL;
2967}
2968
2969
2970/*
2971 * wrap this driver around the specified device, but
2972 * don't respond over USB until a gadget driver binds to us.
2973 */
2974static int langwell_udc_probe(struct pci_dev *pdev,
2975 const struct pci_device_id *id)
2976{
2977 struct langwell_udc *dev;
2978#ifndef OTG_TRANSCEIVER
2979 unsigned long resource, len;
2980#endif
2981 void __iomem *base = NULL;
2982 size_t size;
2983 int retval;
2984
2985 if (the_controller) {
2986 dev_warn(&pdev->dev, "ignoring\n");
2987 return -EBUSY;
2988 }
2989
2990 /* alloc, and start init */
2991 dev = kzalloc(sizeof *dev, GFP_KERNEL);
2992 if (dev == NULL) {
2993 retval = -ENOMEM;
2994 goto error;
2995 }
2996
2997 /* initialize device spinlock */
2998 spin_lock_init(&dev->lock);
2999
3000 dev->pdev = pdev;
3001 DBG(dev, "---> %s()\n", __func__);
3002
3003#ifdef OTG_TRANSCEIVER
3004 /* PCI device is already enabled by otg_transceiver driver */
3005 dev->enabled = 1;
3006
3007 /* mem region and register base */
3008 dev->region = 1;
3009 dev->transceiver = otg_get_transceiver();
3010 dev->lotg = otg_to_langwell(dev->transceiver);
3011 base = dev->lotg->regs;
3012#else
3013 pci_set_drvdata(pdev, dev);
3014
3015 /* now all the pci goodies ... */
3016 if (pci_enable_device(pdev) < 0) {
3017 retval = -ENODEV;
3018 goto error;
3019 }
3020 dev->enabled = 1;
3021
3022 /* control register: BAR 0 */
3023 resource = pci_resource_start(pdev, 0);
3024 len = pci_resource_len(pdev, 0);
3025 if (!request_mem_region(resource, len, driver_name)) {
3026 ERROR(dev, "controller already in use\n");
3027 retval = -EBUSY;
3028 goto error;
3029 }
3030 dev->region = 1;
3031
3032 base = ioremap_nocache(resource, len);
3033#endif
3034 if (base == NULL) {
3035 ERROR(dev, "can't map memory\n");
3036 retval = -EFAULT;
3037 goto error;
3038 }
3039
3040 dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
3041 VDBG(dev, "dev->cap_regs: %p\n", dev->cap_regs);
3042 dev->op_regs = (struct langwell_op_regs __iomem *)
3043 (base + OP_REG_OFFSET);
3044 VDBG(dev, "dev->op_regs: %p\n", dev->op_regs);
3045
3046 /* irq setup after old hardware is cleaned up */
3047 if (!pdev->irq) {
3048 ERROR(dev, "No IRQ. Check PCI setup!\n");
3049 retval = -ENODEV;
3050 goto error;
3051 }
3052
3053#ifndef OTG_TRANSCEIVER
3054 INFO(dev, "irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
3055 pdev->irq, resource, len, base);
3056 /* enables bus-mastering for device dev */
3057 pci_set_master(pdev);
3058
3059 if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
3060 driver_name, dev) != 0) {
3061 ERROR(dev, "request interrupt %d failed\n", pdev->irq);
3062 retval = -EBUSY;
3063 goto error;
3064 }
3065 dev->got_irq = 1;
3066#endif
3067
3068 /* set stopped bit */
3069 dev->stopped = 1;
3070
3071 /* capabilities and endpoint number */
3072 dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
3073 dev->dciversion = readw(&dev->cap_regs->dciversion);
3074 dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
3075 VDBG(dev, "dev->lpm: %d\n", dev->lpm);
3076 VDBG(dev, "dev->dciversion: 0x%04x\n", dev->dciversion);
3077 VDBG(dev, "dccparams: 0x%08x\n", readl(&dev->cap_regs->dccparams));
3078 VDBG(dev, "dev->devcap: %d\n", dev->devcap);
3079 if (!dev->devcap) {
3080 ERROR(dev, "can't support device mode\n");
3081 retval = -ENODEV;
3082 goto error;
3083 }
3084
3085 /* a pair of endpoints (out/in) for each address */
3086 dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
3087 VDBG(dev, "dev->ep_max: %d\n", dev->ep_max);
3088
3089 /* allocate endpoints memory */
3090 dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
3091 GFP_KERNEL);
3092 if (!dev->ep) {
3093 ERROR(dev, "allocate endpoints memory failed\n");
3094 retval = -ENOMEM;
3095 goto error;
3096 }
3097
3098 /* allocate device dQH memory */
3099 size = dev->ep_max * sizeof(struct langwell_dqh);
3100 VDBG(dev, "orig size = %d\n", size);
3101 if (size < DQH_ALIGNMENT)
3102 size = DQH_ALIGNMENT;
3103 else if ((size % DQH_ALIGNMENT) != 0) {
3104 size += DQH_ALIGNMENT + 1;
3105 size &= ~(DQH_ALIGNMENT - 1);
3106 }
3107 dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
3108 &dev->ep_dqh_dma, GFP_KERNEL);
3109 if (!dev->ep_dqh) {
3110 ERROR(dev, "allocate dQH memory failed\n");
3111 retval = -ENOMEM;
3112 goto error;
3113 }
3114 dev->ep_dqh_size = size;
3115 VDBG(dev, "ep_dqh_size = %d\n", dev->ep_dqh_size);
3116
3117 /* initialize ep0 status request structure */
3118 dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
3119 if (!dev->status_req) {
3120 ERROR(dev, "allocate status_req memory failed\n");
3121 retval = -ENOMEM;
3122 goto error;
3123 }
3124 INIT_LIST_HEAD(&dev->status_req->queue);
3125
3126 /* allocate a small amount of memory to get valid address */
3127 dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
3128 dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
3129
3130 dev->resume_state = USB_STATE_NOTATTACHED;
3131 dev->usb_state = USB_STATE_POWERED;
3132 dev->ep0_dir = USB_DIR_OUT;
3133 dev->remote_wakeup = 0; /* default to 0 on reset */
3134
3135#ifndef OTG_TRANSCEIVER
3136 /* reset device controller */
3137 langwell_udc_reset(dev);
3138#endif
3139
3140 /* initialize gadget structure */
3141 dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */
3142 dev->gadget.ep0 = &dev->ep[0].ep; /* gadget ep0 */
3143 INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */
3144 dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */
3145 dev->gadget.is_dualspeed = 1; /* support dual speed */
3146#ifdef OTG_TRANSCEIVER
3147 dev->gadget.is_otg = 1; /* support otg mode */
3148#endif
3149
3150 /* the "gadget" abstracts/virtualizes the controller */
3151 dev_set_name(&dev->gadget.dev, "gadget");
3152 dev->gadget.dev.parent = &pdev->dev;
3153 dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
3154 dev->gadget.dev.release = gadget_release;
3155 dev->gadget.name = driver_name; /* gadget name */
3156
3157 /* controller endpoints reinit */
3158 eps_reinit(dev);
3159
3160#ifndef OTG_TRANSCEIVER
3161 /* reset ep0 dQH and endptctrl */
3162 ep0_reset(dev);
3163#endif
3164
3165 /* create dTD dma_pool resource */
3166 dev->dtd_pool = dma_pool_create("langwell_dtd",
3167 &dev->pdev->dev,
3168 sizeof(struct langwell_dtd),
3169 DTD_ALIGNMENT,
3170 DMA_BOUNDARY);
3171
3172 if (!dev->dtd_pool) {
3173 retval = -ENOMEM;
3174 goto error;
3175 }
3176
3177 /* done */
3178 INFO(dev, "%s\n", driver_desc);
3179 INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);
3180 INFO(dev, "Driver version: " DRIVER_VERSION "\n");
3181 INFO(dev, "Support (max) %d endpoints\n", dev->ep_max);
3182 INFO(dev, "Device interface version: 0x%04x\n", dev->dciversion);
3183 INFO(dev, "Controller mode: %s\n", dev->devcap ? "Device" : "Host");
3184 INFO(dev, "Support USB LPM: %s\n", dev->lpm ? "Yes" : "No");
3185
3186 VDBG(dev, "After langwell_udc_probe(), print all registers:\n");
3187#ifdef VERBOSE
3188 print_all_registers(dev);
3189#endif
3190
3191 the_controller = dev;
3192
3193 retval = device_register(&dev->gadget.dev);
3194 if (retval)
3195 goto error;
3196
3197 retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
3198 if (retval)
3199 goto error;
3200
3201 VDBG(dev, "<--- %s()\n", __func__);
3202 return 0;
3203
3204error:
3205 if (dev) {
3206 DBG(dev, "<--- %s()\n", __func__);
3207 langwell_udc_remove(pdev);
3208 }
3209
3210 return retval;
3211}
3212
3213
3214/* device controller suspend */
3215static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
3216{
3217 struct langwell_udc *dev = the_controller;
3218 u32 devlc;
3219
3220 DBG(dev, "---> %s()\n", __func__);
3221
3222 /* disable interrupt and set controller to stop state */
3223 langwell_udc_stop(dev);
3224
3225 /* diable IRQ handler */
3226 if (dev->got_irq)
3227 free_irq(pdev->irq, dev);
3228 dev->got_irq = 0;
3229
3230
3231 /* save PCI state */
3232 pci_save_state(pdev);
3233
3234 /* set device power state */
3235 pci_set_power_state(pdev, PCI_D3hot);
3236
3237 /* enter PHY low power suspend */
3238 devlc = readl(&dev->op_regs->devlc);
3239 VDBG(dev, "devlc = 0x%08x\n", devlc);
3240 devlc |= LPM_PHCD;
3241 writel(devlc, &dev->op_regs->devlc);
3242
3243 DBG(dev, "<--- %s()\n", __func__);
3244 return 0;
3245}
3246
3247
3248/* device controller resume */
3249static int langwell_udc_resume(struct pci_dev *pdev)
3250{
3251 struct langwell_udc *dev = the_controller;
3252 u32 devlc;
3253
3254 DBG(dev, "---> %s()\n", __func__);
3255
3256 /* exit PHY low power suspend */
3257 devlc = readl(&dev->op_regs->devlc);
3258 VDBG(dev, "devlc = 0x%08x\n", devlc);
3259 devlc &= ~LPM_PHCD;
3260 writel(devlc, &dev->op_regs->devlc);
3261
3262 /* set device D0 power state */
3263 pci_set_power_state(pdev, PCI_D0);
3264
3265 /* restore PCI state */
3266 pci_restore_state(pdev);
3267
3268 /* enable IRQ handler */
3269 if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED, driver_name, dev)
3270 != 0) {
3271 ERROR(dev, "request interrupt %d failed\n", pdev->irq);
3272 return -1;
3273 }
3274 dev->got_irq = 1;
3275
3276 /* reset and start controller to run state */
3277 if (dev->stopped) {
3278 /* reset device controller */
3279 langwell_udc_reset(dev);
3280
3281 /* reset ep0 dQH and endptctrl */
3282 ep0_reset(dev);
3283
3284 /* start device if gadget is loaded */
3285 if (dev->driver)
3286 langwell_udc_start(dev);
3287 }
3288
3289 /* reset USB status */
3290 dev->usb_state = USB_STATE_ATTACHED;
3291 dev->ep0_state = WAIT_FOR_SETUP;
3292 dev->ep0_dir = USB_DIR_OUT;
3293
3294 DBG(dev, "<--- %s()\n", __func__);
3295 return 0;
3296}
3297
3298
3299/* pci driver shutdown */
3300static void langwell_udc_shutdown(struct pci_dev *pdev)
3301{
3302 struct langwell_udc *dev = the_controller;
3303 u32 usbmode;
3304
3305 DBG(dev, "---> %s()\n", __func__);
3306
3307 /* reset controller mode to IDLE */
3308 usbmode = readl(&dev->op_regs->usbmode);
3309 DBG(dev, "usbmode = 0x%08x\n", usbmode);
3310 usbmode &= (~3 | MODE_IDLE);
3311 writel(usbmode, &dev->op_regs->usbmode);
3312
3313 DBG(dev, "<--- %s()\n", __func__);
3314}
3315
3316/*-------------------------------------------------------------------------*/
3317
3318static const struct pci_device_id pci_ids[] = { {
3319 .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
3320 .class_mask = ~0,
3321 .vendor = 0x8086,
3322 .device = 0x0811,
3323 .subvendor = PCI_ANY_ID,
3324 .subdevice = PCI_ANY_ID,
3325}, { /* end: all zeroes */ }
3326};
3327
3328
3329MODULE_DEVICE_TABLE(pci, pci_ids);
3330
3331
3332static struct pci_driver langwell_pci_driver = {
3333 .name = (char *) driver_name,
3334 .id_table = pci_ids,
3335
3336 .probe = langwell_udc_probe,
3337 .remove = langwell_udc_remove,
3338
3339 /* device controller suspend/resume */
3340 .suspend = langwell_udc_suspend,
3341 .resume = langwell_udc_resume,
3342
3343 .shutdown = langwell_udc_shutdown,
3344};
3345
3346
3347MODULE_DESCRIPTION(DRIVER_DESC);
3348MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>");
3349MODULE_VERSION(DRIVER_VERSION);
3350MODULE_LICENSE("GPL");
3351
3352
3353static int __init init(void)
3354{
3355#ifdef OTG_TRANSCEIVER
3356 return langwell_register_peripheral(&langwell_pci_driver);
3357#else
3358 return pci_register_driver(&langwell_pci_driver);
3359#endif
3360}
3361module_init(init);
3362
3363
3364static void __exit cleanup(void)
3365{
3366#ifdef OTG_TRANSCEIVER
3367 return langwell_unregister_peripheral(&langwell_pci_driver);
3368#else
3369 pci_unregister_driver(&langwell_pci_driver);
3370#endif
3371}
3372module_exit(cleanup);
3373
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-11 04:26:53 -0400