[PATCH] usbcore PCI glue updates for PM

This updates the PCI glue to address the new and simplified usbcore suspend
semantics, where CONFIG_USB_SUSPEND becomes irrelevant to HCDs because
hcd->hub_suspend() will always be called.

  - Removes now-unneeded recursion support

  - Go back to ignoring faults reported by the wakeup calls; we expect them
    to fail sometimes, and that's just fine.

The PCI HCDs will need simple changes to catch up to this, like being able
to ignore the setting of CONFIG_USB_SUSPEND.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/usb/core/hcd-pci.c |  106 +++++++++++++++++++++------------------------
 drivers/usb/core/hcd.h     |    6 +-
 2 files changed, 53 insertions(+), 59 deletions(-)

1 files changed, 50 insertions, 56 deletions

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 6385d1a99b60..84d9e69329bb 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -30,6 +30,8 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <linux/usb.h>
+
+#include "usb.h"
 #include "hcd.h"
 
 
@@ -197,6 +199,26 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
 
         hcd = pci_get_drvdata(dev);
 
+        /* Root hub suspend should have stopped all downstream traffic,
+         * and all bus master traffic.  And done so for both the interface
+         * and the stub usb_device (which we check here).  But maybe it
+         * didn't; writing sysfs power/state files ignores such rules...
+         *
+         * We must ignore the FREEZE vs SUSPEND distinction here, because
+         * otherwise the swsusp will save (and restore) garbage state.
+         */
+        if (hcd->self.root_hub->dev.power.power_state.event == PM_EVENT_ON)
+                return -EBUSY;
+
+        if (hcd->driver->suspend) {
+                retval = hcd->driver->suspend(hcd, message);
+                if (retval) {
+                        dev_dbg (&dev->dev, "PCI pre-suspend fail, %d\n",
+                                retval);
+                        goto done;
+                }
+        }
+
         /* FIXME until the generic PM interfaces change a lot more, this
          * can't use PCI D1 and D2 states.  For example, the confusion
          * between messages and states will need to vanish, and messages
@@ -215,31 +237,13 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
          */
         has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
 
-        switch (hcd->state) {
-
-        /* entry if root hub wasn't yet suspended ... from sysfs,
-         * without autosuspend, or if USB_SUSPEND isn't configured.
+        /* Downstream ports from this root hub should already be quiesced, so
+         * there will be no DMA activity.  Now we can shut down the upstream
+         * link (except maybe for PME# resume signaling) and enter some PCI
+         * low power state, if the hardware allows.
          */
-        case HC_STATE_RUNNING:
-                hcd->state = HC_STATE_QUIESCING;
-                retval = hcd->driver->suspend (hcd, message);
-                if (retval) {
-                        dev_dbg (hcd->self.controller, 
-                                        "suspend fail, retval %d\n",
-                                        retval);
-                        break;
-                }
-                hcd->state = HC_STATE_SUSPENDED;
-                /* FALLTHROUGH */
+        if (hcd->state == HC_STATE_SUSPENDED) {
 
-        /* entry with CONFIG_USB_SUSPEND, or hcds that autosuspend: the
-         * controller and/or root hub will already have been suspended,
-         * but it won't be ready for a PCI resume call.
-         *
-         * FIXME only CONFIG_USB_SUSPEND guarantees hub_suspend() will
-         * have been called, otherwise root hub timers still run ...
-         */
-        case HC_STATE_SUSPENDED:
                 /* no DMA or IRQs except when HC is active */
                 if (dev->current_state == PCI_D0) {
                         pci_save_state (dev);
@@ -248,7 +252,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
 
                 if (!has_pci_pm) {
                         dev_dbg (hcd->self.controller, "--> PCI D0/legacy\n");
-                        break;
+                        goto done;
                 }
 
                 /* NOTE:  dev->current_state becomes nonzero only here, and
@@ -259,28 +263,29 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
                 retval = pci_set_power_state (dev, PCI_D3hot);
                 if (retval == 0) {
                         dev_dbg (hcd->self.controller, "--> PCI D3\n");
-                        retval = pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup);
-                        if (retval)
-                                break;
-                        retval = pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup);
-                } else if (retval < 0) {
+
+                        /* Ignore these return values.  We rely on pci code to
+                         * reject requests the hardware can't implement, rather
+                         * than coding the same thing.
+                         */
+                        (void) pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup);
+                        (void) pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup);
+                } else {
                         dev_dbg (&dev->dev, "PCI D3 suspend fail, %d\n",
                                         retval);
                         (void) usb_hcd_pci_resume (dev);
-                        break;
                 }
-                break;
-        default:
+
+        } else {
                 dev_dbg (hcd->self.controller, "hcd state %d; not suspended\n",
                         hcd->state);
                 WARN_ON(1);
                 retval = -EINVAL;
-                break;
         }
 
-        /* update power_state **ONLY** to make sysfs happier */
+done:
         if (retval == 0)
-                dev->dev.power.power_state = message;
+                dev->dev.power.power_state = PMSG_SUSPEND;
         return retval;
 }
 EXPORT_SYMBOL (usb_hcd_pci_suspend);
@@ -336,20 +341,9 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
                                 dev->current_state);
                 }
 #endif
-                retval = pci_enable_wake (dev, dev->current_state, 0);
-                if (retval) {
-                        dev_err(hcd->self.controller,
-                                "can't enable_wake to %d, %d!\n",
-                                dev->current_state, retval);
-                        return retval;
-                }
-                retval = pci_enable_wake (dev, PCI_D3cold, 0);
-                if (retval) {
-                        dev_err(hcd->self.controller,
-                                "can't enable_wake to %d, %d!\n",
-                                PCI_D3cold, retval);
-                        return retval;
-                }
+                /* yes, ignore these results too... */
+                (void) pci_enable_wake (dev, dev->current_state, 0);
+                (void) pci_enable_wake (dev, PCI_D3cold, 0);
         } else {
                 /* Same basic cases: clean (powered/not), dirty */
                 dev_dbg(hcd->self.controller, "PCI legacy resume\n");
@@ -371,17 +365,17 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
 
         dev->dev.power.power_state = PMSG_ON;
 
-        hcd->state = HC_STATE_RESUMING;
         hcd->saw_irq = 0;
 
-        retval = hcd->driver->resume (hcd);
-        if (!HC_IS_RUNNING (hcd->state)) {
-                dev_dbg (hcd->self.controller, 
-                                "resume fail, retval %d\n", retval);
-                usb_hc_died (hcd);
+        if (hcd->driver->resume) {
+                retval = hcd->driver->resume(hcd);
+                if (retval) {
+                        dev_err (hcd->self.controller,
+                                "PCI post-resume error %d!\n", retval);
+                        usb_hc_died (hcd);
+                }
         }
 
-        retval = pci_enable_device(dev);
         return retval;
 }
 EXPORT_SYMBOL (usb_hcd_pci_resume);