aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/ucc_uart.c
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@suse.de>2011-01-13 15:10:18 -0500
committerGreg Kroah-Hartman <gregkh@suse.de>2011-01-13 15:10:18 -0500
commitab4382d27412e7e3e7c936e8d50d8888dfac3df8 (patch)
tree51d96dea2431140358784b6b426715f37f74fd53 /drivers/tty/serial/ucc_uart.c
parent728674a7e466628df2aeec6d11a2ae1ef968fb67 (diff)
tty: move drivers/serial/ to drivers/tty/serial/
The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl> Cc: Michael H. Warfield <mhw@wittsend.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/tty/serial/ucc_uart.c')
-rw-r--r--drivers/tty/serial/ucc_uart.c1537
1 files changed, 1537 insertions, 0 deletions
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
new file mode 100644
index 000000000000..3f4848e2174a
--- /dev/null
+++ b/drivers/tty/serial/ucc_uart.c
@@ -0,0 +1,1537 @@
1/*
2 * Freescale QUICC Engine UART device driver
3 *
4 * Author: Timur Tabi <timur@freescale.com>
5 *
6 * Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
9 * or implied.
10 *
11 * This driver adds support for UART devices via Freescale's QUICC Engine
12 * found on some Freescale SOCs.
13 *
14 * If Soft-UART support is needed but not already present, then this driver
15 * will request and upload the "Soft-UART" microcode upon probe. The
16 * filename of the microcode should be fsl_qe_ucode_uart_X_YZ.bin, where "X"
17 * is the name of the SOC (e.g. 8323), and YZ is the revision of the SOC,
18 * (e.g. "11" for 1.1).
19 */
20
21#include <linux/module.h>
22#include <linux/serial.h>
23#include <linux/slab.h>
24#include <linux/serial_core.h>
25#include <linux/io.h>
26#include <linux/of_platform.h>
27#include <linux/dma-mapping.h>
28
29#include <linux/fs_uart_pd.h>
30#include <asm/ucc_slow.h>
31
32#include <linux/firmware.h>
33#include <asm/reg.h>
34
35/*
36 * The GUMR flag for Soft UART. This would normally be defined in qe.h,
37 * but Soft-UART is a hack and we want to keep everything related to it in
38 * this file.
39 */
40#define UCC_SLOW_GUMR_H_SUART 0x00004000 /* Soft-UART */
41
42/*
43 * soft_uart is 1 if we need to use Soft-UART mode
44 */
45static int soft_uart;
46/*
47 * firmware_loaded is 1 if the firmware has been loaded, 0 otherwise.
48 */
49static int firmware_loaded;
50
51/* Enable this macro to configure all serial ports in internal loopback
52 mode */
53/* #define LOOPBACK */
54
55/* The major and minor device numbers are defined in
56 * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE
57 * UART, we have major number 204 and minor numbers 46 - 49, which are the
58 * same as for the CPM2. This decision was made because no Freescale part
59 * has both a CPM and a QE.
60 */
61#define SERIAL_QE_MAJOR 204
62#define SERIAL_QE_MINOR 46
63
64/* Since we only have minor numbers 46 - 49, there is a hard limit of 4 ports */
65#define UCC_MAX_UART 4
66
67/* The number of buffer descriptors for receiving characters. */
68#define RX_NUM_FIFO 4
69
70/* The number of buffer descriptors for transmitting characters. */
71#define TX_NUM_FIFO 4
72
73/* The maximum size of the character buffer for a single RX BD. */
74#define RX_BUF_SIZE 32
75
76/* The maximum size of the character buffer for a single TX BD. */
77#define TX_BUF_SIZE 32
78
79/*
80 * The number of jiffies to wait after receiving a close command before the
81 * device is actually closed. This allows the last few characters to be
82 * sent over the wire.
83 */
84#define UCC_WAIT_CLOSING 100
85
86struct ucc_uart_pram {
87 struct ucc_slow_pram common;
88 u8 res1[8]; /* reserved */
89 __be16 maxidl; /* Maximum idle chars */
90 __be16 idlc; /* temp idle counter */
91 __be16 brkcr; /* Break count register */
92 __be16 parec; /* receive parity error counter */
93 __be16 frmec; /* receive framing error counter */
94 __be16 nosec; /* receive noise counter */
95 __be16 brkec; /* receive break condition counter */
96 __be16 brkln; /* last received break length */
97 __be16 uaddr[2]; /* UART address character 1 & 2 */
98 __be16 rtemp; /* Temp storage */
99 __be16 toseq; /* Transmit out of sequence char */
100 __be16 cchars[8]; /* control characters 1-8 */
101 __be16 rccm; /* receive control character mask */
102 __be16 rccr; /* receive control character register */
103 __be16 rlbc; /* receive last break character */
104 __be16 res2; /* reserved */
105 __be32 res3; /* reserved, should be cleared */
106 u8 res4; /* reserved, should be cleared */
107 u8 res5[3]; /* reserved, should be cleared */
108 __be32 res6; /* reserved, should be cleared */
109 __be32 res7; /* reserved, should be cleared */
110 __be32 res8; /* reserved, should be cleared */
111 __be32 res9; /* reserved, should be cleared */
112 __be32 res10; /* reserved, should be cleared */
113 __be32 res11; /* reserved, should be cleared */
114 __be32 res12; /* reserved, should be cleared */
115 __be32 res13; /* reserved, should be cleared */
116/* The rest is for Soft-UART only */
117 __be16 supsmr; /* 0x90, Shadow UPSMR */
118 __be16 res92; /* 0x92, reserved, initialize to 0 */
119 __be32 rx_state; /* 0x94, RX state, initialize to 0 */
120 __be32 rx_cnt; /* 0x98, RX count, initialize to 0 */
121 u8 rx_length; /* 0x9C, Char length, set to 1+CL+PEN+1+SL */
122 u8 rx_bitmark; /* 0x9D, reserved, initialize to 0 */
123 u8 rx_temp_dlst_qe; /* 0x9E, reserved, initialize to 0 */
124 u8 res14[0xBC - 0x9F]; /* reserved */
125 __be32 dump_ptr; /* 0xBC, Dump pointer */
126 __be32 rx_frame_rem; /* 0xC0, reserved, initialize to 0 */
127 u8 rx_frame_rem_size; /* 0xC4, reserved, initialize to 0 */
128 u8 tx_mode; /* 0xC5, mode, 0=AHDLC, 1=UART */
129 __be16 tx_state; /* 0xC6, TX state */
130 u8 res15[0xD0 - 0xC8]; /* reserved */
131 __be32 resD0; /* 0xD0, reserved, initialize to 0 */
132 u8 resD4; /* 0xD4, reserved, initialize to 0 */
133 __be16 resD5; /* 0xD5, reserved, initialize to 0 */
134} __attribute__ ((packed));
135
136/* SUPSMR definitions, for Soft-UART only */
137#define UCC_UART_SUPSMR_SL 0x8000
138#define UCC_UART_SUPSMR_RPM_MASK 0x6000
139#define UCC_UART_SUPSMR_RPM_ODD 0x0000
140#define UCC_UART_SUPSMR_RPM_LOW 0x2000
141#define UCC_UART_SUPSMR_RPM_EVEN 0x4000
142#define UCC_UART_SUPSMR_RPM_HIGH 0x6000
143#define UCC_UART_SUPSMR_PEN 0x1000
144#define UCC_UART_SUPSMR_TPM_MASK 0x0C00
145#define UCC_UART_SUPSMR_TPM_ODD 0x0000
146#define UCC_UART_SUPSMR_TPM_LOW 0x0400
147#define UCC_UART_SUPSMR_TPM_EVEN 0x0800
148#define UCC_UART_SUPSMR_TPM_HIGH 0x0C00
149#define UCC_UART_SUPSMR_FRZ 0x0100
150#define UCC_UART_SUPSMR_UM_MASK 0x00c0
151#define UCC_UART_SUPSMR_UM_NORMAL 0x0000
152#define UCC_UART_SUPSMR_UM_MAN_MULTI 0x0040
153#define UCC_UART_SUPSMR_UM_AUTO_MULTI 0x00c0
154#define UCC_UART_SUPSMR_CL_MASK 0x0030
155#define UCC_UART_SUPSMR_CL_8 0x0030
156#define UCC_UART_SUPSMR_CL_7 0x0020
157#define UCC_UART_SUPSMR_CL_6 0x0010
158#define UCC_UART_SUPSMR_CL_5 0x0000
159
160#define UCC_UART_TX_STATE_AHDLC 0x00
161#define UCC_UART_TX_STATE_UART 0x01
162#define UCC_UART_TX_STATE_X1 0x00
163#define UCC_UART_TX_STATE_X16 0x80
164
165#define UCC_UART_PRAM_ALIGNMENT 0x100
166
167#define UCC_UART_SIZE_OF_BD UCC_SLOW_SIZE_OF_BD
168#define NUM_CONTROL_CHARS 8
169
170/* Private per-port data structure */
171struct uart_qe_port {
172 struct uart_port port;
173 struct ucc_slow __iomem *uccp;
174 struct ucc_uart_pram __iomem *uccup;
175 struct ucc_slow_info us_info;
176 struct ucc_slow_private *us_private;
177 struct device_node *np;
178 unsigned int ucc_num; /* First ucc is 0, not 1 */
179
180 u16 rx_nrfifos;
181 u16 rx_fifosize;
182 u16 tx_nrfifos;
183 u16 tx_fifosize;
184 int wait_closing;
185 u32 flags;
186 struct qe_bd *rx_bd_base;
187 struct qe_bd *rx_cur;
188 struct qe_bd *tx_bd_base;
189 struct qe_bd *tx_cur;
190 unsigned char *tx_buf;
191 unsigned char *rx_buf;
192 void *bd_virt; /* virtual address of the BD buffers */
193 dma_addr_t bd_dma_addr; /* bus address of the BD buffers */
194 unsigned int bd_size; /* size of BD buffer space */
195};
196
197static struct uart_driver ucc_uart_driver = {
198 .owner = THIS_MODULE,
199 .driver_name = "ucc_uart",
200 .dev_name = "ttyQE",
201 .major = SERIAL_QE_MAJOR,
202 .minor = SERIAL_QE_MINOR,
203 .nr = UCC_MAX_UART,
204};
205
206/*
207 * Virtual to physical address translation.
208 *
209 * Given the virtual address for a character buffer, this function returns
210 * the physical (DMA) equivalent.
211 */
212static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port)
213{
214 if (likely((addr >= qe_port->bd_virt)) &&
215 (addr < (qe_port->bd_virt + qe_port->bd_size)))
216 return qe_port->bd_dma_addr + (addr - qe_port->bd_virt);
217
218 /* something nasty happened */
219 printk(KERN_ERR "%s: addr=%p\n", __func__, addr);
220 BUG();
221 return 0;
222}
223
224/*
225 * Physical to virtual address translation.
226 *
227 * Given the physical (DMA) address for a character buffer, this function
228 * returns the virtual equivalent.
229 */
230static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port)
231{
232 /* sanity check */
233 if (likely((addr >= qe_port->bd_dma_addr) &&
234 (addr < (qe_port->bd_dma_addr + qe_port->bd_size))))
235 return qe_port->bd_virt + (addr - qe_port->bd_dma_addr);
236
237 /* something nasty happened */
238 printk(KERN_ERR "%s: addr=%x\n", __func__, addr);
239 BUG();
240 return NULL;
241}
242
243/*
244 * Return 1 if the QE is done transmitting all buffers for this port
245 *
246 * This function scans each BD in sequence. If we find a BD that is not
247 * ready (READY=1), then we return 0 indicating that the QE is still sending
248 * data. If we reach the last BD (WRAP=1), then we know we've scanned
249 * the entire list, and all BDs are done.
250 */
251static unsigned int qe_uart_tx_empty(struct uart_port *port)
252{
253 struct uart_qe_port *qe_port =
254 container_of(port, struct uart_qe_port, port);
255 struct qe_bd *bdp = qe_port->tx_bd_base;
256
257 while (1) {
258 if (in_be16(&bdp->status) & BD_SC_READY)
259 /* This BD is not done, so return "not done" */
260 return 0;
261
262 if (in_be16(&bdp->status) & BD_SC_WRAP)
263 /*
264 * This BD is done and it's the last one, so return
265 * "done"
266 */
267 return 1;
268
269 bdp++;
270 };
271}
272
273/*
274 * Set the modem control lines
275 *
276 * Although the QE can control the modem control lines (e.g. CTS), we
277 * don't need that support. This function must exist, however, otherwise
278 * the kernel will panic.
279 */
280void qe_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
281{
282}
283
284/*
285 * Get the current modem control line status
286 *
287 * Although the QE can control the modem control lines (e.g. CTS), this
288 * driver currently doesn't support that, so we always return Carrier
289 * Detect, Data Set Ready, and Clear To Send.
290 */
291static unsigned int qe_uart_get_mctrl(struct uart_port *port)
292{
293 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
294}
295
296/*
297 * Disable the transmit interrupt.
298 *
299 * Although this function is called "stop_tx", it does not actually stop
300 * transmission of data. Instead, it tells the QE to not generate an
301 * interrupt when the UCC is finished sending characters.
302 */
303static void qe_uart_stop_tx(struct uart_port *port)
304{
305 struct uart_qe_port *qe_port =
306 container_of(port, struct uart_qe_port, port);
307
308 clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
309}
310
311/*
312 * Transmit as many characters to the HW as possible.
313 *
314 * This function will attempt to stuff of all the characters from the
315 * kernel's transmit buffer into TX BDs.
316 *
317 * A return value of non-zero indicates that it successfully stuffed all
318 * characters from the kernel buffer.
319 *
320 * A return value of zero indicates that there are still characters in the
321 * kernel's buffer that have not been transmitted, but there are no more BDs
322 * available. This function should be called again after a BD has been made
323 * available.
324 */
325static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
326{
327 struct qe_bd *bdp;
328 unsigned char *p;
329 unsigned int count;
330 struct uart_port *port = &qe_port->port;
331 struct circ_buf *xmit = &port->state->xmit;
332
333 bdp = qe_port->rx_cur;
334
335 /* Handle xon/xoff */
336 if (port->x_char) {
337 /* Pick next descriptor and fill from buffer */
338 bdp = qe_port->tx_cur;
339
340 p = qe2cpu_addr(bdp->buf, qe_port);
341
342 *p++ = port->x_char;
343 out_be16(&bdp->length, 1);
344 setbits16(&bdp->status, BD_SC_READY);
345 /* Get next BD. */
346 if (in_be16(&bdp->status) & BD_SC_WRAP)
347 bdp = qe_port->tx_bd_base;
348 else
349 bdp++;
350 qe_port->tx_cur = bdp;
351
352 port->icount.tx++;
353 port->x_char = 0;
354 return 1;
355 }
356
357 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
358 qe_uart_stop_tx(port);
359 return 0;
360 }
361
362 /* Pick next descriptor and fill from buffer */
363 bdp = qe_port->tx_cur;
364
365 while (!(in_be16(&bdp->status) & BD_SC_READY) &&
366 (xmit->tail != xmit->head)) {
367 count = 0;
368 p = qe2cpu_addr(bdp->buf, qe_port);
369 while (count < qe_port->tx_fifosize) {
370 *p++ = xmit->buf[xmit->tail];
371 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
372 port->icount.tx++;
373 count++;
374 if (xmit->head == xmit->tail)
375 break;
376 }
377
378 out_be16(&bdp->length, count);
379 setbits16(&bdp->status, BD_SC_READY);
380
381 /* Get next BD. */
382 if (in_be16(&bdp->status) & BD_SC_WRAP)
383 bdp = qe_port->tx_bd_base;
384 else
385 bdp++;
386 }
387 qe_port->tx_cur = bdp;
388
389 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
390 uart_write_wakeup(port);
391
392 if (uart_circ_empty(xmit)) {
393 /* The kernel buffer is empty, so turn off TX interrupts. We
394 don't need to be told when the QE is finished transmitting
395 the data. */
396 qe_uart_stop_tx(port);
397 return 0;
398 }
399
400 return 1;
401}
402
403/*
404 * Start transmitting data
405 *
406 * This function will start transmitting any available data, if the port
407 * isn't already transmitting data.
408 */
409static void qe_uart_start_tx(struct uart_port *port)
410{
411 struct uart_qe_port *qe_port =
412 container_of(port, struct uart_qe_port, port);
413
414 /* If we currently are transmitting, then just return */
415 if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX)
416 return;
417
418 /* Otherwise, pump the port and start transmission */
419 if (qe_uart_tx_pump(qe_port))
420 setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
421}
422
423/*
424 * Stop transmitting data
425 */
426static void qe_uart_stop_rx(struct uart_port *port)
427{
428 struct uart_qe_port *qe_port =
429 container_of(port, struct uart_qe_port, port);
430
431 clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
432}
433
434/*
435 * Enable status change interrupts
436 *
437 * We don't support status change interrupts, but we need to define this
438 * function otherwise the kernel will panic.
439 */
440static void qe_uart_enable_ms(struct uart_port *port)
441{
442}
443
444/* Start or stop sending break signal
445 *
446 * This function controls the sending of a break signal. If break_state=1,
447 * then we start sending a break signal. If break_state=0, then we stop
448 * sending the break signal.
449 */
450static void qe_uart_break_ctl(struct uart_port *port, int break_state)
451{
452 struct uart_qe_port *qe_port =
453 container_of(port, struct uart_qe_port, port);
454
455 if (break_state)
456 ucc_slow_stop_tx(qe_port->us_private);
457 else
458 ucc_slow_restart_tx(qe_port->us_private);
459}
460
461/* ISR helper function for receiving character.
462 *
463 * This function is called by the ISR to handling receiving characters
464 */
465static void qe_uart_int_rx(struct uart_qe_port *qe_port)
466{
467 int i;
468 unsigned char ch, *cp;
469 struct uart_port *port = &qe_port->port;
470 struct tty_struct *tty = port->state->port.tty;
471 struct qe_bd *bdp;
472 u16 status;
473 unsigned int flg;
474
475 /* Just loop through the closed BDs and copy the characters into
476 * the buffer.
477 */
478 bdp = qe_port->rx_cur;
479 while (1) {
480 status = in_be16(&bdp->status);
481
482 /* If this one is empty, then we assume we've read them all */
483 if (status & BD_SC_EMPTY)
484 break;
485
486 /* get number of characters, and check space in RX buffer */
487 i = in_be16(&bdp->length);
488
489 /* If we don't have enough room in RX buffer for the entire BD,
490 * then we try later, which will be the next RX interrupt.
491 */
492 if (tty_buffer_request_room(tty, i) < i) {
493 dev_dbg(port->dev, "ucc-uart: no room in RX buffer\n");
494 return;
495 }
496
497 /* get pointer */
498 cp = qe2cpu_addr(bdp->buf, qe_port);
499
500 /* loop through the buffer */
501 while (i-- > 0) {
502 ch = *cp++;
503 port->icount.rx++;
504 flg = TTY_NORMAL;
505
506 if (!i && status &
507 (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV))
508 goto handle_error;
509 if (uart_handle_sysrq_char(port, ch))
510 continue;
511
512error_return:
513 tty_insert_flip_char(tty, ch, flg);
514
515 }
516
517 /* This BD is ready to be used again. Clear status. get next */
518 clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR |
519 BD_SC_OV | BD_SC_ID, BD_SC_EMPTY);
520 if (in_be16(&bdp->status) & BD_SC_WRAP)
521 bdp = qe_port->rx_bd_base;
522 else
523 bdp++;
524
525 }
526
527 /* Write back buffer pointer */
528 qe_port->rx_cur = bdp;
529
530 /* Activate BH processing */
531 tty_flip_buffer_push(tty);
532
533 return;
534
535 /* Error processing */
536
537handle_error:
538 /* Statistics */
539 if (status & BD_SC_BR)
540 port->icount.brk++;
541 if (status & BD_SC_PR)
542 port->icount.parity++;
543 if (status & BD_SC_FR)
544 port->icount.frame++;
545 if (status & BD_SC_OV)
546 port->icount.overrun++;
547
548 /* Mask out ignored conditions */
549 status &= port->read_status_mask;
550
551 /* Handle the remaining ones */
552 if (status & BD_SC_BR)
553 flg = TTY_BREAK;
554 else if (status & BD_SC_PR)
555 flg = TTY_PARITY;
556 else if (status & BD_SC_FR)
557 flg = TTY_FRAME;
558
559 /* Overrun does not affect the current character ! */
560 if (status & BD_SC_OV)
561 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
562#ifdef SUPPORT_SYSRQ
563 port->sysrq = 0;
564#endif
565 goto error_return;
566}
567
568/* Interrupt handler
569 *
570 * This interrupt handler is called after a BD is processed.
571 */
572static irqreturn_t qe_uart_int(int irq, void *data)
573{
574 struct uart_qe_port *qe_port = (struct uart_qe_port *) data;
575 struct ucc_slow __iomem *uccp = qe_port->uccp;
576 u16 events;
577
578 /* Clear the interrupts */
579 events = in_be16(&uccp->ucce);
580 out_be16(&uccp->ucce, events);
581
582 if (events & UCC_UART_UCCE_BRKE)
583 uart_handle_break(&qe_port->port);
584
585 if (events & UCC_UART_UCCE_RX)
586 qe_uart_int_rx(qe_port);
587
588 if (events & UCC_UART_UCCE_TX)
589 qe_uart_tx_pump(qe_port);
590
591 return events ? IRQ_HANDLED : IRQ_NONE;
592}
593
594/* Initialize buffer descriptors
595 *
596 * This function initializes all of the RX and TX buffer descriptors.
597 */
598static void qe_uart_initbd(struct uart_qe_port *qe_port)
599{
600 int i;
601 void *bd_virt;
602 struct qe_bd *bdp;
603
604 /* Set the physical address of the host memory buffers in the buffer
605 * descriptors, and the virtual address for us to work with.
606 */
607 bd_virt = qe_port->bd_virt;
608 bdp = qe_port->rx_bd_base;
609 qe_port->rx_cur = qe_port->rx_bd_base;
610 for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) {
611 out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT);
612 out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
613 out_be16(&bdp->length, 0);
614 bd_virt += qe_port->rx_fifosize;
615 bdp++;
616 }
617
618 /* */
619 out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT);
620 out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
621 out_be16(&bdp->length, 0);
622
623 /* Set the physical address of the host memory
624 * buffers in the buffer descriptors, and the
625 * virtual address for us to work with.
626 */
627 bd_virt = qe_port->bd_virt +
628 L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
629 qe_port->tx_cur = qe_port->tx_bd_base;
630 bdp = qe_port->tx_bd_base;
631 for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) {
632 out_be16(&bdp->status, BD_SC_INTRPT);
633 out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
634 out_be16(&bdp->length, 0);
635 bd_virt += qe_port->tx_fifosize;
636 bdp++;
637 }
638
639 /* Loopback requires the preamble bit to be set on the first TX BD */
640#ifdef LOOPBACK
641 setbits16(&qe_port->tx_cur->status, BD_SC_P);
642#endif
643
644 out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT);
645 out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
646 out_be16(&bdp->length, 0);
647}
648
649/*
650 * Initialize a UCC for UART.
651 *
652 * This function configures a given UCC to be used as a UART device. Basic
653 * UCC initialization is handled in qe_uart_request_port(). This function
654 * does all the UART-specific stuff.
655 */
656static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
657{
658 u32 cecr_subblock;
659 struct ucc_slow __iomem *uccp = qe_port->uccp;
660 struct ucc_uart_pram *uccup = qe_port->uccup;
661
662 unsigned int i;
663
664 /* First, disable TX and RX in the UCC */
665 ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
666
667 /* Program the UCC UART parameter RAM */
668 out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
669 out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
670 out_be16(&uccup->common.mrblr, qe_port->rx_fifosize);
671 out_be16(&uccup->maxidl, 0x10);
672 out_be16(&uccup->brkcr, 1);
673 out_be16(&uccup->parec, 0);
674 out_be16(&uccup->frmec, 0);
675 out_be16(&uccup->nosec, 0);
676 out_be16(&uccup->brkec, 0);
677 out_be16(&uccup->uaddr[0], 0);
678 out_be16(&uccup->uaddr[1], 0);
679 out_be16(&uccup->toseq, 0);
680 for (i = 0; i < 8; i++)
681 out_be16(&uccup->cchars[i], 0xC000);
682 out_be16(&uccup->rccm, 0xc0ff);
683
684 /* Configure the GUMR registers for UART */
685 if (soft_uart) {
686 /* Soft-UART requires a 1X multiplier for TX */
687 clrsetbits_be32(&uccp->gumr_l,
688 UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
689 UCC_SLOW_GUMR_L_RDCR_MASK,
690 UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 |
691 UCC_SLOW_GUMR_L_RDCR_16);
692
693 clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
694 UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
695 } else {
696 clrsetbits_be32(&uccp->gumr_l,
697 UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
698 UCC_SLOW_GUMR_L_RDCR_MASK,
699 UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 |
700 UCC_SLOW_GUMR_L_RDCR_16);
701
702 clrsetbits_be32(&uccp->gumr_h,
703 UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX,
704 UCC_SLOW_GUMR_H_RFW);
705 }
706
707#ifdef LOOPBACK
708 clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
709 UCC_SLOW_GUMR_L_DIAG_LOOP);
710 clrsetbits_be32(&uccp->gumr_h,
711 UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN,
712 UCC_SLOW_GUMR_H_CDS);
713#endif
714
715 /* Disable rx interrupts and clear all pending events. */
716 out_be16(&uccp->uccm, 0);
717 out_be16(&uccp->ucce, 0xffff);
718 out_be16(&uccp->udsr, 0x7e7e);
719
720 /* Initialize UPSMR */
721 out_be16(&uccp->upsmr, 0);
722
723 if (soft_uart) {
724 out_be16(&uccup->supsmr, 0x30);
725 out_be16(&uccup->res92, 0);
726 out_be32(&uccup->rx_state, 0);
727 out_be32(&uccup->rx_cnt, 0);
728 out_8(&uccup->rx_bitmark, 0);
729 out_8(&uccup->rx_length, 10);
730 out_be32(&uccup->dump_ptr, 0x4000);
731 out_8(&uccup->rx_temp_dlst_qe, 0);
732 out_be32(&uccup->rx_frame_rem, 0);
733 out_8(&uccup->rx_frame_rem_size, 0);
734 /* Soft-UART requires TX to be 1X */
735 out_8(&uccup->tx_mode,
736 UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1);
737 out_be16(&uccup->tx_state, 0);
738 out_8(&uccup->resD4, 0);
739 out_be16(&uccup->resD5, 0);
740
741 /* Set UART mode.
742 * Enable receive and transmit.
743 */
744
745 /* From the microcode errata:
746 * 1.GUMR_L register, set mode=0010 (QMC).
747 * 2.Set GUMR_H[17] bit. (UART/AHDLC mode).
748 * 3.Set GUMR_H[19:20] (Transparent mode)
749 * 4.Clear GUMR_H[26] (RFW)
750 * ...
751 * 6.Receiver must use 16x over sampling
752 */
753 clrsetbits_be32(&uccp->gumr_l,
754 UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
755 UCC_SLOW_GUMR_L_RDCR_MASK,
756 UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 |
757 UCC_SLOW_GUMR_L_RDCR_16);
758
759 clrsetbits_be32(&uccp->gumr_h,
760 UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN,
761 UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX |
762 UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL);
763
764#ifdef LOOPBACK
765 clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
766 UCC_SLOW_GUMR_L_DIAG_LOOP);
767 clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP |
768 UCC_SLOW_GUMR_H_CDS);
769#endif
770
771 cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
772 qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
773 QE_CR_PROTOCOL_UNSPECIFIED, 0);
774 } else {
775 cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
776 qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
777 QE_CR_PROTOCOL_UART, 0);
778 }
779}
780
781/*
782 * Initialize the port.
783 */
784static int qe_uart_startup(struct uart_port *port)
785{
786 struct uart_qe_port *qe_port =
787 container_of(port, struct uart_qe_port, port);
788 int ret;
789
790 /*
791 * If we're using Soft-UART mode, then we need to make sure the
792 * firmware has been uploaded first.
793 */
794 if (soft_uart && !firmware_loaded) {
795 dev_err(port->dev, "Soft-UART firmware not uploaded\n");
796 return -ENODEV;
797 }
798
799 qe_uart_initbd(qe_port);
800 qe_uart_init_ucc(qe_port);
801
802 /* Install interrupt handler. */
803 ret = request_irq(port->irq, qe_uart_int, IRQF_SHARED, "ucc-uart",
804 qe_port);
805 if (ret) {
806 dev_err(port->dev, "could not claim IRQ %u\n", port->irq);
807 return ret;
808 }
809
810 /* Startup rx-int */
811 setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
812 ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX);
813
814 return 0;
815}
816
817/*
818 * Shutdown the port.
819 */
820static void qe_uart_shutdown(struct uart_port *port)
821{
822 struct uart_qe_port *qe_port =
823 container_of(port, struct uart_qe_port, port);
824 struct ucc_slow __iomem *uccp = qe_port->uccp;
825 unsigned int timeout = 20;
826
827 /* Disable RX and TX */
828
829 /* Wait for all the BDs marked sent */
830 while (!qe_uart_tx_empty(port)) {
831 if (!--timeout) {
832 dev_warn(port->dev, "shutdown timeout\n");
833 break;
834 }
835 set_current_state(TASK_UNINTERRUPTIBLE);
836 schedule_timeout(2);
837 }
838
839 if (qe_port->wait_closing) {
840 /* Wait a bit longer */
841 set_current_state(TASK_UNINTERRUPTIBLE);
842 schedule_timeout(qe_port->wait_closing);
843 }
844
845 /* Stop uarts */
846 ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
847 clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX);
848
849 /* Shut them really down and reinit buffer descriptors */
850 ucc_slow_graceful_stop_tx(qe_port->us_private);
851 qe_uart_initbd(qe_port);
852
853 free_irq(port->irq, qe_port);
854}
855
856/*
857 * Set the serial port parameters.
858 */
859static void qe_uart_set_termios(struct uart_port *port,
860 struct ktermios *termios, struct ktermios *old)
861{
862 struct uart_qe_port *qe_port =
863 container_of(port, struct uart_qe_port, port);
864 struct ucc_slow __iomem *uccp = qe_port->uccp;
865 unsigned int baud;
866 unsigned long flags;
867 u16 upsmr = in_be16(&uccp->upsmr);
868 struct ucc_uart_pram __iomem *uccup = qe_port->uccup;
869 u16 supsmr = in_be16(&uccup->supsmr);
870 u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */
871
872 /* Character length programmed into the mode register is the
873 * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
874 * 1 or 2 stop bits, minus 1.
875 * The value 'bits' counts this for us.
876 */
877
878 /* byte size */
879 upsmr &= UCC_UART_UPSMR_CL_MASK;
880 supsmr &= UCC_UART_SUPSMR_CL_MASK;
881
882 switch (termios->c_cflag & CSIZE) {
883 case CS5:
884 upsmr |= UCC_UART_UPSMR_CL_5;
885 supsmr |= UCC_UART_SUPSMR_CL_5;
886 char_length += 5;
887 break;
888 case CS6:
889 upsmr |= UCC_UART_UPSMR_CL_6;
890 supsmr |= UCC_UART_SUPSMR_CL_6;
891 char_length += 6;
892 break;
893 case CS7:
894 upsmr |= UCC_UART_UPSMR_CL_7;
895 supsmr |= UCC_UART_SUPSMR_CL_7;
896 char_length += 7;
897 break;
898 default: /* case CS8 */
899 upsmr |= UCC_UART_UPSMR_CL_8;
900 supsmr |= UCC_UART_SUPSMR_CL_8;
901 char_length += 8;
902 break;
903 }
904
905 /* If CSTOPB is set, we want two stop bits */
906 if (termios->c_cflag & CSTOPB) {
907 upsmr |= UCC_UART_UPSMR_SL;
908 supsmr |= UCC_UART_SUPSMR_SL;
909 char_length++; /* + SL */
910 }
911
912 if (termios->c_cflag & PARENB) {
913 upsmr |= UCC_UART_UPSMR_PEN;
914 supsmr |= UCC_UART_SUPSMR_PEN;
915 char_length++; /* + PEN */
916
917 if (!(termios->c_cflag & PARODD)) {
918 upsmr &= ~(UCC_UART_UPSMR_RPM_MASK |
919 UCC_UART_UPSMR_TPM_MASK);
920 upsmr |= UCC_UART_UPSMR_RPM_EVEN |
921 UCC_UART_UPSMR_TPM_EVEN;
922 supsmr &= ~(UCC_UART_SUPSMR_RPM_MASK |
923 UCC_UART_SUPSMR_TPM_MASK);
924 supsmr |= UCC_UART_SUPSMR_RPM_EVEN |
925 UCC_UART_SUPSMR_TPM_EVEN;
926 }
927 }
928
929 /*
930 * Set up parity check flag
931 */
932 port->read_status_mask = BD_SC_EMPTY | BD_SC_OV;
933 if (termios->c_iflag & INPCK)
934 port->read_status_mask |= BD_SC_FR | BD_SC_PR;
935 if (termios->c_iflag & (BRKINT | PARMRK))
936 port->read_status_mask |= BD_SC_BR;
937
938 /*
939 * Characters to ignore
940 */
941 port->ignore_status_mask = 0;
942 if (termios->c_iflag & IGNPAR)
943 port->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
944 if (termios->c_iflag & IGNBRK) {
945 port->ignore_status_mask |= BD_SC_BR;
946 /*
947 * If we're ignore parity and break indicators, ignore
948 * overruns too. (For real raw support).
949 */
950 if (termios->c_iflag & IGNPAR)
951 port->ignore_status_mask |= BD_SC_OV;
952 }
953 /*
954 * !!! ignore all characters if CREAD is not set
955 */
956 if ((termios->c_cflag & CREAD) == 0)
957 port->read_status_mask &= ~BD_SC_EMPTY;
958
959 baud = uart_get_baud_rate(port, termios, old, 0, 115200);
960
961 /* Do we really need a spinlock here? */
962 spin_lock_irqsave(&port->lock, flags);
963
964 out_be16(&uccp->upsmr, upsmr);
965 if (soft_uart) {
966 out_be16(&uccup->supsmr, supsmr);
967 out_8(&uccup->rx_length, char_length);
968
969 /* Soft-UART requires a 1X multiplier for TX */
970 qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
971 qe_setbrg(qe_port->us_info.tx_clock, baud, 1);
972 } else {
973 qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
974 qe_setbrg(qe_port->us_info.tx_clock, baud, 16);
975 }
976
977 spin_unlock_irqrestore(&port->lock, flags);
978}
979
980/*
981 * Return a pointer to a string that describes what kind of port this is.
982 */
983static const char *qe_uart_type(struct uart_port *port)
984{
985 return "QE";
986}
987
988/*
989 * Allocate any memory and I/O resources required by the port.
990 */
991static int qe_uart_request_port(struct uart_port *port)
992{
993 int ret;
994 struct uart_qe_port *qe_port =
995 container_of(port, struct uart_qe_port, port);
996 struct ucc_slow_info *us_info = &qe_port->us_info;
997 struct ucc_slow_private *uccs;
998 unsigned int rx_size, tx_size;
999 void *bd_virt;
1000 dma_addr_t bd_dma_addr = 0;
1001
1002 ret = ucc_slow_init(us_info, &uccs);
1003 if (ret) {
1004 dev_err(port->dev, "could not initialize UCC%u\n",
1005 qe_port->ucc_num);
1006 return ret;
1007 }
1008
1009 qe_port->us_private = uccs;
1010 qe_port->uccp = uccs->us_regs;
1011 qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram;
1012 qe_port->rx_bd_base = uccs->rx_bd;
1013 qe_port->tx_bd_base = uccs->tx_bd;
1014
1015 /*
1016 * Allocate the transmit and receive data buffers.
1017 */
1018
1019 rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize);
1020 tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize);
1021
1022 bd_virt = dma_alloc_coherent(port->dev, rx_size + tx_size, &bd_dma_addr,
1023 GFP_KERNEL);
1024 if (!bd_virt) {
1025 dev_err(port->dev, "could not allocate buffer descriptors\n");
1026 return -ENOMEM;
1027 }
1028
1029 qe_port->bd_virt = bd_virt;
1030 qe_port->bd_dma_addr = bd_dma_addr;
1031 qe_port->bd_size = rx_size + tx_size;
1032
1033 qe_port->rx_buf = bd_virt;
1034 qe_port->tx_buf = qe_port->rx_buf + rx_size;
1035
1036 return 0;
1037}
1038
1039/*
1040 * Configure the port.
1041 *
1042 * We say we're a CPM-type port because that's mostly true. Once the device
1043 * is configured, this driver operates almost identically to the CPM serial
1044 * driver.
1045 */
1046static void qe_uart_config_port(struct uart_port *port, int flags)
1047{
1048 if (flags & UART_CONFIG_TYPE) {
1049 port->type = PORT_CPM;
1050 qe_uart_request_port(port);
1051 }
1052}
1053
1054/*
1055 * Release any memory and I/O resources that were allocated in
1056 * qe_uart_request_port().
1057 */
1058static void qe_uart_release_port(struct uart_port *port)
1059{
1060 struct uart_qe_port *qe_port =
1061 container_of(port, struct uart_qe_port, port);
1062 struct ucc_slow_private *uccs = qe_port->us_private;
1063
1064 dma_free_coherent(port->dev, qe_port->bd_size, qe_port->bd_virt,
1065 qe_port->bd_dma_addr);
1066
1067 ucc_slow_free(uccs);
1068}
1069
1070/*
1071 * Verify that the data in serial_struct is suitable for this device.
1072 */
1073static int qe_uart_verify_port(struct uart_port *port,
1074 struct serial_struct *ser)
1075{
1076 if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
1077 return -EINVAL;
1078
1079 if (ser->irq < 0 || ser->irq >= nr_irqs)
1080 return -EINVAL;
1081
1082 if (ser->baud_base < 9600)
1083 return -EINVAL;
1084
1085 return 0;
1086}
1087/* UART operations
1088 *
1089 * Details on these functions can be found in Documentation/serial/driver
1090 */
1091static struct uart_ops qe_uart_pops = {
1092 .tx_empty = qe_uart_tx_empty,
1093 .set_mctrl = qe_uart_set_mctrl,
1094 .get_mctrl = qe_uart_get_mctrl,
1095 .stop_tx = qe_uart_stop_tx,
1096 .start_tx = qe_uart_start_tx,
1097 .stop_rx = qe_uart_stop_rx,
1098 .enable_ms = qe_uart_enable_ms,
1099 .break_ctl = qe_uart_break_ctl,
1100 .startup = qe_uart_startup,
1101 .shutdown = qe_uart_shutdown,
1102 .set_termios = qe_uart_set_termios,
1103 .type = qe_uart_type,
1104 .release_port = qe_uart_release_port,
1105 .request_port = qe_uart_request_port,
1106 .config_port = qe_uart_config_port,
1107 .verify_port = qe_uart_verify_port,
1108};
1109
1110/*
1111 * Obtain the SOC model number and revision level
1112 *
1113 * This function parses the device tree to obtain the SOC model. It then
1114 * reads the SVR register to the revision.
1115 *
1116 * The device tree stores the SOC model two different ways.
1117 *
1118 * The new way is:
1119 *
1120 * cpu@0 {
1121 * compatible = "PowerPC,8323";
1122 * device_type = "cpu";
1123 * ...
1124 *
1125 *
1126 * The old way is:
1127 * PowerPC,8323@0 {
1128 * device_type = "cpu";
1129 * ...
1130 *
1131 * This code first checks the new way, and then the old way.
1132 */
1133static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l)
1134{
1135 struct device_node *np;
1136 const char *soc_string;
1137 unsigned int svr;
1138 unsigned int soc;
1139
1140 /* Find the CPU node */
1141 np = of_find_node_by_type(NULL, "cpu");
1142 if (!np)
1143 return 0;
1144 /* Find the compatible property */
1145 soc_string = of_get_property(np, "compatible", NULL);
1146 if (!soc_string)
1147 /* No compatible property, so try the name. */
1148 soc_string = np->name;
1149
1150 /* Extract the SOC number from the "PowerPC," string */
1151 if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc)
1152 return 0;
1153
1154 /* Get the revision from the SVR */
1155 svr = mfspr(SPRN_SVR);
1156 *rev_h = (svr >> 4) & 0xf;
1157 *rev_l = svr & 0xf;
1158
1159 return soc;
1160}
1161
1162/*
1163 * requst_firmware_nowait() callback function
1164 *
1165 * This function is called by the kernel when a firmware is made available,
1166 * or if it times out waiting for the firmware.
1167 */
1168static void uart_firmware_cont(const struct firmware *fw, void *context)
1169{
1170 struct qe_firmware *firmware;
1171 struct device *dev = context;
1172 int ret;
1173
1174 if (!fw) {
1175 dev_err(dev, "firmware not found\n");
1176 return;
1177 }
1178
1179 firmware = (struct qe_firmware *) fw->data;
1180
1181 if (firmware->header.length != fw->size) {
1182 dev_err(dev, "invalid firmware\n");
1183 goto out;
1184 }
1185
1186 ret = qe_upload_firmware(firmware);
1187 if (ret) {
1188 dev_err(dev, "could not load firmware\n");
1189 goto out;
1190 }
1191
1192 firmware_loaded = 1;
1193 out:
1194 release_firmware(fw);
1195}
1196
1197static int ucc_uart_probe(struct platform_device *ofdev,
1198 const struct of_device_id *match)
1199{
1200 struct device_node *np = ofdev->dev.of_node;
1201 const unsigned int *iprop; /* Integer OF properties */
1202 const char *sprop; /* String OF properties */
1203 struct uart_qe_port *qe_port = NULL;
1204 struct resource res;
1205 int ret;
1206
1207 /*
1208 * Determine if we need Soft-UART mode
1209 */
1210 if (of_find_property(np, "soft-uart", NULL)) {
1211 dev_dbg(&ofdev->dev, "using Soft-UART mode\n");
1212 soft_uart = 1;
1213 }
1214
1215 /*
1216 * If we are using Soft-UART, determine if we need to upload the
1217 * firmware, too.
1218 */
1219 if (soft_uart) {
1220 struct qe_firmware_info *qe_fw_info;
1221
1222 qe_fw_info = qe_get_firmware_info();
1223
1224 /* Check if the firmware has been uploaded. */
1225 if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) {
1226 firmware_loaded = 1;
1227 } else {
1228 char filename[32];
1229 unsigned int soc;
1230 unsigned int rev_h;
1231 unsigned int rev_l;
1232
1233 soc = soc_info(&rev_h, &rev_l);
1234 if (!soc) {
1235 dev_err(&ofdev->dev, "unknown CPU model\n");
1236 return -ENXIO;
1237 }
1238 sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin",
1239 soc, rev_h, rev_l);
1240
1241 dev_info(&ofdev->dev, "waiting for firmware %s\n",
1242 filename);
1243
1244 /*
1245 * We call request_firmware_nowait instead of
1246 * request_firmware so that the driver can load and
1247 * initialize the ports without holding up the rest of
1248 * the kernel. If hotplug support is enabled in the
1249 * kernel, then we use it.
1250 */
1251 ret = request_firmware_nowait(THIS_MODULE,
1252 FW_ACTION_HOTPLUG, filename, &ofdev->dev,
1253 GFP_KERNEL, &ofdev->dev, uart_firmware_cont);
1254 if (ret) {
1255 dev_err(&ofdev->dev,
1256 "could not load firmware %s\n",
1257 filename);
1258 return ret;
1259 }
1260 }
1261 }
1262
1263 qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL);
1264 if (!qe_port) {
1265 dev_err(&ofdev->dev, "can't allocate QE port structure\n");
1266 return -ENOMEM;
1267 }
1268
1269 /* Search for IRQ and mapbase */
1270 ret = of_address_to_resource(np, 0, &res);
1271 if (ret) {
1272 dev_err(&ofdev->dev, "missing 'reg' property in device tree\n");
1273 kfree(qe_port);
1274 return ret;
1275 }
1276 if (!res.start) {
1277 dev_err(&ofdev->dev, "invalid 'reg' property in device tree\n");
1278 kfree(qe_port);
1279 return -EINVAL;
1280 }
1281 qe_port->port.mapbase = res.start;
1282
1283 /* Get the UCC number (device ID) */
1284 /* UCCs are numbered 1-7 */
1285 iprop = of_get_property(np, "cell-index", NULL);
1286 if (!iprop) {
1287 iprop = of_get_property(np, "device-id", NULL);
1288 if (!iprop) {
1289 kfree(qe_port);
1290 dev_err(&ofdev->dev, "UCC is unspecified in "
1291 "device tree\n");
1292 return -EINVAL;
1293 }
1294 }
1295
1296 if ((*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
1297 dev_err(&ofdev->dev, "no support for UCC%u\n", *iprop);
1298 kfree(qe_port);
1299 return -ENODEV;
1300 }
1301 qe_port->ucc_num = *iprop - 1;
1302
1303 /*
1304 * In the future, we should not require the BRG to be specified in the
1305 * device tree. If no clock-source is specified, then just pick a BRG
1306 * to use. This requires a new QE library function that manages BRG
1307 * assignments.
1308 */
1309
1310 sprop = of_get_property(np, "rx-clock-name", NULL);
1311 if (!sprop) {
1312 dev_err(&ofdev->dev, "missing rx-clock-name in device tree\n");
1313 kfree(qe_port);
1314 return -ENODEV;
1315 }
1316
1317 qe_port->us_info.rx_clock = qe_clock_source(sprop);
1318 if ((qe_port->us_info.rx_clock < QE_BRG1) ||
1319 (qe_port->us_info.rx_clock > QE_BRG16)) {
1320 dev_err(&ofdev->dev, "rx-clock-name must be a BRG for UART\n");
1321 kfree(qe_port);
1322 return -ENODEV;
1323 }
1324
1325#ifdef LOOPBACK
1326 /* In internal loopback mode, TX and RX must use the same clock */
1327 qe_port->us_info.tx_clock = qe_port->us_info.rx_clock;
1328#else
1329 sprop = of_get_property(np, "tx-clock-name", NULL);
1330 if (!sprop) {
1331 dev_err(&ofdev->dev, "missing tx-clock-name in device tree\n");
1332 kfree(qe_port);
1333 return -ENODEV;
1334 }
1335 qe_port->us_info.tx_clock = qe_clock_source(sprop);
1336#endif
1337 if ((qe_port->us_info.tx_clock < QE_BRG1) ||
1338 (qe_port->us_info.tx_clock > QE_BRG16)) {
1339 dev_err(&ofdev->dev, "tx-clock-name must be a BRG for UART\n");
1340 kfree(qe_port);
1341 return -ENODEV;
1342 }
1343
1344 /* Get the port number, numbered 0-3 */
1345 iprop = of_get_property(np, "port-number", NULL);
1346 if (!iprop) {
1347 dev_err(&ofdev->dev, "missing port-number in device tree\n");
1348 kfree(qe_port);
1349 return -EINVAL;
1350 }
1351 qe_port->port.line = *iprop;
1352 if (qe_port->port.line >= UCC_MAX_UART) {
1353 dev_err(&ofdev->dev, "port-number must be 0-%u\n",
1354 UCC_MAX_UART - 1);
1355 kfree(qe_port);
1356 return -EINVAL;
1357 }
1358
1359 qe_port->port.irq = irq_of_parse_and_map(np, 0);
1360 if (qe_port->port.irq == NO_IRQ) {
1361 dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n",
1362 qe_port->ucc_num + 1);
1363 kfree(qe_port);
1364 return -EINVAL;
1365 }
1366
1367 /*
1368 * Newer device trees have an "fsl,qe" compatible property for the QE
1369 * node, but we still need to support older device trees.
1370 */
1371 np = of_find_compatible_node(NULL, NULL, "fsl,qe");
1372 if (!np) {
1373 np = of_find_node_by_type(NULL, "qe");
1374 if (!np) {
1375 dev_err(&ofdev->dev, "could not find 'qe' node\n");
1376 kfree(qe_port);
1377 return -EINVAL;
1378 }
1379 }
1380
1381 iprop = of_get_property(np, "brg-frequency", NULL);
1382 if (!iprop) {
1383 dev_err(&ofdev->dev,
1384 "missing brg-frequency in device tree\n");
1385 kfree(qe_port);
1386 return -EINVAL;
1387 }
1388
1389 if (*iprop)
1390 qe_port->port.uartclk = *iprop;
1391 else {
1392 /*
1393 * Older versions of U-Boot do not initialize the brg-frequency
1394 * property, so in this case we assume the BRG frequency is
1395 * half the QE bus frequency.
1396 */
1397 iprop = of_get_property(np, "bus-frequency", NULL);
1398 if (!iprop) {
1399 dev_err(&ofdev->dev,
1400 "missing QE bus-frequency in device tree\n");
1401 kfree(qe_port);
1402 return -EINVAL;
1403 }
1404 if (*iprop)
1405 qe_port->port.uartclk = *iprop / 2;
1406 else {
1407 dev_err(&ofdev->dev,
1408 "invalid QE bus-frequency in device tree\n");
1409 kfree(qe_port);
1410 return -EINVAL;
1411 }
1412 }
1413
1414 spin_lock_init(&qe_port->port.lock);
1415 qe_port->np = np;
1416 qe_port->port.dev = &ofdev->dev;
1417 qe_port->port.ops = &qe_uart_pops;
1418 qe_port->port.iotype = UPIO_MEM;
1419
1420 qe_port->tx_nrfifos = TX_NUM_FIFO;
1421 qe_port->tx_fifosize = TX_BUF_SIZE;
1422 qe_port->rx_nrfifos = RX_NUM_FIFO;
1423 qe_port->rx_fifosize = RX_BUF_SIZE;
1424
1425 qe_port->wait_closing = UCC_WAIT_CLOSING;
1426 qe_port->port.fifosize = 512;
1427 qe_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
1428
1429 qe_port->us_info.ucc_num = qe_port->ucc_num;
1430 qe_port->us_info.regs = (phys_addr_t) res.start;
1431 qe_port->us_info.irq = qe_port->port.irq;
1432
1433 qe_port->us_info.rx_bd_ring_len = qe_port->rx_nrfifos;
1434 qe_port->us_info.tx_bd_ring_len = qe_port->tx_nrfifos;
1435
1436 /* Make sure ucc_slow_init() initializes both TX and RX */
1437 qe_port->us_info.init_tx = 1;
1438 qe_port->us_info.init_rx = 1;
1439
1440 /* Add the port to the uart sub-system. This will cause
1441 * qe_uart_config_port() to be called, so the us_info structure must
1442 * be initialized.
1443 */
1444 ret = uart_add_one_port(&ucc_uart_driver, &qe_port->port);
1445 if (ret) {
1446 dev_err(&ofdev->dev, "could not add /dev/ttyQE%u\n",
1447 qe_port->port.line);
1448 kfree(qe_port);
1449 return ret;
1450 }
1451
1452 dev_set_drvdata(&ofdev->dev, qe_port);
1453
1454 dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n",
1455 qe_port->ucc_num + 1, qe_port->port.line);
1456
1457 /* Display the mknod command for this device */
1458 dev_dbg(&ofdev->dev, "mknod command is 'mknod /dev/ttyQE%u c %u %u'\n",
1459 qe_port->port.line, SERIAL_QE_MAJOR,
1460 SERIAL_QE_MINOR + qe_port->port.line);
1461
1462 return 0;
1463}
1464
1465static int ucc_uart_remove(struct platform_device *ofdev)
1466{
1467 struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev);
1468
1469 dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line);
1470
1471 uart_remove_one_port(&ucc_uart_driver, &qe_port->port);
1472
1473 dev_set_drvdata(&ofdev->dev, NULL);
1474 kfree(qe_port);
1475
1476 return 0;
1477}
1478
1479static struct of_device_id ucc_uart_match[] = {
1480 {
1481 .type = "serial",
1482 .compatible = "ucc_uart",
1483 },
1484 {},
1485};
1486MODULE_DEVICE_TABLE(of, ucc_uart_match);
1487
1488static struct of_platform_driver ucc_uart_of_driver = {
1489 .driver = {
1490 .name = "ucc_uart",
1491 .owner = THIS_MODULE,
1492 .of_match_table = ucc_uart_match,
1493 },
1494 .probe = ucc_uart_probe,
1495 .remove = ucc_uart_remove,
1496};
1497
1498static int __init ucc_uart_init(void)
1499{
1500 int ret;
1501
1502 printk(KERN_INFO "Freescale QUICC Engine UART device driver\n");
1503#ifdef LOOPBACK
1504 printk(KERN_INFO "ucc-uart: Using loopback mode\n");
1505#endif
1506
1507 ret = uart_register_driver(&ucc_uart_driver);
1508 if (ret) {
1509 printk(KERN_ERR "ucc-uart: could not register UART driver\n");
1510 return ret;
1511 }
1512
1513 ret = of_register_platform_driver(&ucc_uart_of_driver);
1514 if (ret)
1515 printk(KERN_ERR
1516 "ucc-uart: could not register platform driver\n");
1517
1518 return ret;
1519}
1520
1521static void __exit ucc_uart_exit(void)
1522{
1523 printk(KERN_INFO
1524 "Freescale QUICC Engine UART device driver unloading\n");
1525
1526 of_unregister_platform_driver(&ucc_uart_of_driver);
1527 uart_unregister_driver(&ucc_uart_driver);
1528}
1529
1530module_init(ucc_uart_init);
1531module_exit(ucc_uart_exit);
1532
1533MODULE_DESCRIPTION("Freescale QUICC Engine (QE) UART");
1534MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
1535MODULE_LICENSE("GPL v2");
1536MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_QE_MAJOR);
1537
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-12 10:03:32 -0500