Merge tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree related changes for omaps.

Note that this branch is based on omap-cleanup-sparseirq-for-v3.7
to avoid merge conflicts with the sparseirq changes for gpio-twl4030
driver.

* tag 'omap-devel-dt-merged-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm/dts: Mux uart pins for omap4-sdp
  ARM: OMAP2+: select PINCTRL in Kconfig
  arm/dts: Add pinctrl driver entries for omap2/3/4
  arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm
  ARM: dts: omap3-overo: Add support for the blue LED
  Documentation: dt: Update the OMAP documentation with Overo/Toby
  ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board
  ARM: dts: OMAP4: Add reg and interrupts for every nodes
  ARM: dts: AM33XX: Specify reg and interrupt property for all nodes
  ARM: dts: AM33XX: Convert all hex numbers to lower-case
  ARM: dts: omap3-beagle: Enable audio support
  ARM: dts: omap5: Add McPDM and DMIC section to the dtsi file
  ARM: dts: omap5: Add McBSP entries
  ARM: dts: omap4: Add reg-names for McPDM and DMIC
  ARM: dts: omap4: Add McBSP entries
  ARM: dts: omap3: Add McBSP entries
  ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2
  ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC
  ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support
  ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM
  ...

1 files changed, 2 insertions, 34 deletions

diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index a0703624d5e5..b13949ad3408 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -44,8 +44,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#define PORT_M32R_BASE  PORT_M32R_SIO
-#define PORT_INDEX(x)   (x - PORT_M32R_BASE + 1)
 #define BAUD_RATE       115200
 
 #include <linux/serial_core.h>
@@ -132,22 +130,6 @@ struct irq_info {
 
 static struct irq_info irq_lists[NR_IRQS];
 
-/*
- * Here we define the default xmit fifo size used for each type of UART.
- */
-static const struct serial_uart_config uart_config[] = {
-        [PORT_UNKNOWN] = {
-                .name                   = "unknown",
-                .dfl_xmit_fifo_size     = 1,
-                .flags                  = 0,
-        },
-        [PORT_INDEX(PORT_M32R_SIO)] = {
-                .name                   = "M32RSIO",
-                .dfl_xmit_fifo_size     = 1,
-                .flags                  = 0,
-        },
-};
-
 #ifdef CONFIG_SERIAL_M32R_PLDSIO
 
 #define __sio_in(x) inw((unsigned long)(x))
@@ -907,8 +889,7 @@ static void m32r_sio_config_port(struct uart_port *port, int unused)
 
         spin_lock_irqsave(&up->port.lock, flags);
 
-        up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
-        up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
+        up->port.fifosize = 1;
 
         spin_unlock_irqrestore(&up->port.lock, flags);
 }
@@ -916,23 +897,11 @@ static void m32r_sio_config_port(struct uart_port *port, int unused)
 static int
 m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-        if (ser->irq >= nr_irqs || ser->irq < 0 ||
-            ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
-            ser->type >= ARRAY_SIZE(uart_config))
+        if (ser->irq >= nr_irqs || ser->irq < 0 || ser->baud_base < 9600)
                 return -EINVAL;
         return 0;
 }
 
-static const char *
-m32r_sio_type(struct uart_port *port)
-{
-        int type = port->type;
-
-        if (type >= ARRAY_SIZE(uart_config))
-                type = 0;
-        return uart_config[type].name;
-}
-
 static struct uart_ops m32r_sio_pops = {
         .tx_empty       = m32r_sio_tx_empty,
         .set_mctrl      = m32r_sio_set_mctrl,
@@ -946,7 +915,6 @@ static struct uart_ops m32r_sio_pops = {
         .shutdown       = m32r_sio_shutdown,
         .set_termios    = m32r_sio_set_termios,
         .pm             = m32r_sio_pm,
-        .type           = m32r_sio_type,
         .release_port   = m32r_sio_release_port,
         .request_port   = m32r_sio_request_port,
         .config_port    = m32r_sio_config_port,