Merge branch 'linux-2.6'

1 files changed, 28 insertions, 52 deletions

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d6b4ead693b7..fd9bb777df28 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -49,6 +49,7 @@
 #define DMA_RX_YCOUNT           (PAGE_SIZE / DMA_RX_XCOUNT)
 
 #define DMA_RX_FLUSH_JIFFIES    (HZ / 50)
+#define CTS_CHECK_JIFFIES       (HZ / 50)
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
@@ -290,11 +291,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 {
         struct circ_buf *xmit = &uart->port.info->xmit;
 
-        if (uart->port.x_char) {
-                UART_PUT_CHAR(uart, uart->port.x_char);
-                uart->port.icount.tx++;
-                uart->port.x_char = 0;
-        }
         /*
          * Check the modem control lines before
          * transmitting anything.
@@ -306,6 +302,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
                 return;
         }
 
+        if (uart->port.x_char) {
+                UART_PUT_CHAR(uart, uart->port.x_char);
+                uart->port.icount.tx++;
+                uart->port.x_char = 0;
+        }
+
         while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
                 UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -345,15 +347,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 }
 #endif
 
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-static void bfin_serial_do_work(struct work_struct *work)
-{
-        struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
-
-        bfin_serial_mctrl_check(uart);
-}
-#endif
-
 #ifdef CONFIG_SERIAL_BFIN_DMA
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 {
@@ -361,6 +354,12 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 
         uart->tx_done = 0;
 
+        /*
+         * Check the modem control lines before
+         * transmitting anything.
+         */
+        bfin_serial_mctrl_check(uart);
+
         if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
                 uart->tx_count = 0;
                 uart->tx_done = 1;
@@ -373,12 +372,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
                 uart->port.x_char = 0;
         }
 
-        /*
-         * Check the modem control lines before
-         * transmitting anything.
-         */
-        bfin_serial_mctrl_check(uart);
-
         uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
         if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
                 uart->tx_count = UART_XMIT_SIZE - xmit->tail;
@@ -530,11 +523,7 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
         if (uart->cts_pin < 0)
                 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
 
-# ifdef BF54x
-        if (UART_GET_MSR(uart) & CTS)
-# else
-        if (gpio_get_value(uart->cts_pin))
-# endif
+        if (UART_GET_CTS(uart))
                 return TIOCM_DSR | TIOCM_CAR;
         else
 #endif
@@ -549,17 +538,9 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
                 return;
 
         if (mctrl & TIOCM_RTS)
-# ifdef BF54x
-                UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
-                gpio_set_value(uart->rts_pin, 0);
-# endif
+                UART_CLEAR_RTS(uart);
         else
-# ifdef BF54x
-                UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
-                gpio_set_value(uart->rts_pin, 1);
-# endif
+                UART_SET_RTS(uart);
 #endif
 }
 
@@ -577,7 +558,10 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
         uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
         if (!(status & TIOCM_CTS)) {
                 tty->hw_stopped = 1;
-                schedule_work(&uart->cts_workqueue);
+                uart->cts_timer.data = (unsigned long)(uart);
+                uart->cts_timer.function = (void *)bfin_serial_mctrl_check;
+                uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES;
+                add_timer(&(uart->cts_timer));
         } else {
                 tty->hw_stopped = 0;
         }
@@ -752,11 +736,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 
         /* Disable UART */
         ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
-        UART_CLEAR_IER(uart, 0xF);
-#else
-        UART_PUT_IER(uart, 0);
-#endif
+        UART_DISABLE_INTS(uart);
 
         /* Set DLAB in LCR to Access DLL and DLH */
         UART_SET_DLAB(uart);
@@ -771,11 +751,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
         UART_PUT_LCR(uart, lcr);
 
         /* Enable UART */
-#ifdef CONFIG_BF54x
-        UART_SET_IER(uart, ier);
-#else
-        UART_PUT_IER(uart, ier);
-#endif
+        UART_ENABLE_INTS(uart, ier);
 
         val = UART_GET_GCTL(uart);
         val |= UCEN;
@@ -833,15 +809,15 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
  * Enable the IrDA function if tty->ldisc.num is N_IRDA.
  * In other cases, disable IrDA function.
  */
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
 {
-        int line = tty->index;
+        int line = port->line;
         unsigned short val;
 
-        if (line >= tty->driver->num)
+        if (line >= port->info->tty->driver->num)
                 return;
 
-        switch (tty->ldisc.num) {
+        switch (port->info->tty->ldisc.num) {
         case N_IRDA:
                 val = UART_GET_GCTL(&bfin_serial_ports[line]);
                 val |= (IREN | RPOLC);
@@ -866,6 +842,7 @@ static struct uart_ops bfin_serial_pops = {
         .startup        = bfin_serial_startup,
         .shutdown       = bfin_serial_shutdown,
         .set_termios    = bfin_serial_set_termios,
+        .set_ldisc      = bfin_serial_set_ldisc,
         .type           = bfin_serial_type,
         .release_port   = bfin_serial_release_port,
         .request_port   = bfin_serial_request_port,
@@ -904,7 +881,7 @@ static void __init bfin_serial_init_ports(void)
                 init_timer(&(bfin_serial_ports[i].rx_dma_timer));
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
-                INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
+                init_timer(&(bfin_serial_ports[i].cts_timer));
                 bfin_serial_ports[i].cts_pin        =
                         bfin_serial_resource[i].uart_cts_pin;
                 bfin_serial_ports[i].rts_pin        =
@@ -1206,7 +1183,6 @@ static int __init bfin_serial_init(void)
 
         ret = uart_register_driver(&bfin_serial_reg);
         if (ret == 0) {
-                bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
                 ret = platform_driver_register(&bfin_serial_driver);
                 if (ret) {
                         pr_debug("uart register failed\n");