aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial/68360serial.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/serial/68360serial.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/serial/68360serial.c')
-rw-r--r--drivers/serial/68360serial.c3027
1 files changed, 3027 insertions, 0 deletions
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
new file mode 100644
index 000000000000..f148022b6b4e
--- /dev/null
+++ b/drivers/serial/68360serial.c
@@ -0,0 +1,3027 @@
1/*
2 * UART driver for 68360 CPM SCC or SMC
3 * Copyright (c) 2000 D. Jeff Dionne <jeff@uclinux.org>,
4 * Copyright (c) 2000 Michael Leslie <mleslie@lineo.ca>
5 * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
6 *
7 * I used the serial.c driver as the framework for this driver.
8 * Give credit to those guys.
9 * The original code was written for the MBX860 board. I tried to make
10 * it generic, but there may be some assumptions in the structures that
11 * have to be fixed later.
12 * To save porting time, I did not bother to change any object names
13 * that are not accessed outside of this file.
14 * It still needs lots of work........When it was easy, I included code
15 * to support the SCCs, but this has never been tested, nor is it complete.
16 * Only the SCCs support modem control, so that is not complete either.
17 *
18 * This module exports the following rs232 io functions:
19 *
20 * int rs_360_init(void);
21 */
22
23#include <linux/config.h>
24#include <linux/module.h>
25#include <linux/errno.h>
26#include <linux/signal.h>
27#include <linux/sched.h>
28#include <linux/timer.h>
29#include <linux/interrupt.h>
30#include <linux/tty.h>
31#include <linux/tty_flip.h>
32#include <linux/serial.h>
33#include <linux/serialP.h>
34#include <linux/major.h>
35#include <linux/string.h>
36#include <linux/fcntl.h>
37#include <linux/ptrace.h>
38#include <linux/mm.h>
39#include <linux/init.h>
40#include <linux/delay.h>
41#include <asm/irq.h>
42#include <asm/m68360.h>
43#include <asm/commproc.h>
44
45
46#ifdef CONFIG_KGDB
47extern void breakpoint(void);
48extern void set_debug_traps(void);
49extern int kgdb_output_string (const char* s, unsigned int count);
50#endif
51
52
53/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */
54#include <linux/console.h>
55
56/* this defines the index into rs_table for the port to use
57 */
58#ifndef CONFIG_SERIAL_CONSOLE_PORT
59#define CONFIG_SERIAL_CONSOLE_PORT 1 /* ie SMC2 - note USE_SMC2 must be defined */
60#endif
61/* #endif */
62
63#if 0
64/* SCC2 for console
65 */
66#undef CONFIG_SERIAL_CONSOLE_PORT
67#define CONFIG_SERIAL_CONSOLE_PORT 2
68#endif
69
70
71#define TX_WAKEUP ASYNC_SHARE_IRQ
72
73static char *serial_name = "CPM UART driver";
74static char *serial_version = "0.03";
75
76static struct tty_driver *serial_driver;
77int serial_console_setup(struct console *co, char *options);
78
79/*
80 * Serial driver configuration section. Here are the various options:
81 */
82#define SERIAL_PARANOIA_CHECK
83#define CONFIG_SERIAL_NOPAUSE_IO
84#define SERIAL_DO_RESTART
85
86/* Set of debugging defines */
87
88#undef SERIAL_DEBUG_INTR
89#undef SERIAL_DEBUG_OPEN
90#undef SERIAL_DEBUG_FLOW
91#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
92
93#define _INLINE_ inline
94
95#define DBG_CNT(s)
96
97/* We overload some of the items in the data structure to meet our
98 * needs. For example, the port address is the CPM parameter ram
99 * offset for the SCC or SMC. The maximum number of ports is 4 SCCs and
100 * 2 SMCs. The "hub6" field is used to indicate the channel number, with
101 * a flag indicating SCC or SMC, and the number is used as an index into
102 * the CPM parameter area for this device.
103 * The "type" field is currently set to 0, for PORT_UNKNOWN. It is
104 * not currently used. I should probably use it to indicate the port
105 * type of SMC or SCC.
106 * The SMCs do not support any modem control signals.
107 */
108#define smc_scc_num hub6
109#define NUM_IS_SCC ((int)0x00010000)
110#define PORT_NUM(P) ((P) & 0x0000ffff)
111
112
113#if defined (CONFIG_UCQUICC)
114
115volatile extern void *_periph_base;
116/* sipex transceiver
117 * mode bits for are on pins
118 *
119 * SCC2 d16..19
120 * SCC3 d20..23
121 * SCC4 d24..27
122 */
123#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1)))
124
125static uint sipex_mode_bits = 0x00000000;
126
127#endif
128
129/* There is no `serial_state' defined back here in 2.0.
130 * Try to get by with serial_struct
131 */
132/* #define serial_state serial_struct */
133
134/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few
135 * extras: */
136
137#if 0
138struct async_icount_24 {
139 __u32 cts, dsr, rng, dcd, tx, rx;
140 __u32 frame, parity, overrun, brk;
141 __u32 buf_overrun;
142} icount;
143#endif
144
145#if 0
146
147struct serial_state {
148 int magic;
149 int baud_base;
150 unsigned long port;
151 int irq;
152 int flags;
153 int hub6;
154 int type;
155 int line;
156 int revision; /* Chip revision (950) */
157 int xmit_fifo_size;
158 int custom_divisor;
159 int count;
160 u8 *iomem_base;
161 u16 iomem_reg_shift;
162 unsigned short close_delay;
163 unsigned short closing_wait; /* time to wait before closing */
164 struct async_icount_24 icount;
165 int io_type;
166 struct async_struct *info;
167};
168#endif
169
170#define SSTATE_MAGIC 0x5302
171
172
173
174/* SMC2 is sometimes used for low performance TDM interfaces. Define
175 * this as 1 if you want SMC2 as a serial port UART managed by this driver.
176 * Define this as 0 if you wish to use SMC2 for something else.
177 */
178#define USE_SMC2 1
179
180#if 0
181/* Define SCC to ttySx mapping. */
182#define SCC_NUM_BASE (USE_SMC2 + 1) /* SCC base tty "number" */
183
184/* Define which SCC is the first one to use for a serial port. These
185 * are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used
186 * for Ethernet, and the first available SCC for serial UART is SCC2.
187 * NOTE: IF YOU CHANGE THIS, you have to change the PROFF_xxx and
188 * interrupt vectors in the table below to match.
189 */
190#define SCC_IDX_BASE 1 /* table index */
191#endif
192
193
194/* Processors other than the 860 only get SMCs configured by default.
195 * Either they don't have SCCs or they are allocated somewhere else.
196 * Of course, there are now 860s without some SCCs, so we will need to
197 * address that someday.
198 * The Embedded Planet Multimedia I/O cards use TDM interfaces to the
199 * stereo codec parts, and we use SMC2 to help support that.
200 */
201static struct serial_state rs_table[] = {
202/* type line PORT IRQ FLAGS smc_scc_num (F.K.A. hub6) */
203 { 0, 0, PRSLOT_SMC1, CPMVEC_SMC1, 0, 0 } /* SMC1 ttyS0 */
204#if USE_SMC2
205 ,{ 0, 0, PRSLOT_SMC2, CPMVEC_SMC2, 0, 1 } /* SMC2 ttyS1 */
206#endif
207
208#if defined(CONFIG_SERIAL_68360_SCC)
209 ,{ 0, 0, PRSLOT_SCC2, CPMVEC_SCC2, 0, (NUM_IS_SCC | 1) } /* SCC2 ttyS2 */
210 ,{ 0, 0, PRSLOT_SCC3, CPMVEC_SCC3, 0, (NUM_IS_SCC | 2) } /* SCC3 ttyS3 */
211 ,{ 0, 0, PRSLOT_SCC4, CPMVEC_SCC4, 0, (NUM_IS_SCC | 3) } /* SCC4 ttyS4 */
212#endif
213};
214
215#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state))
216
217/* The number of buffer descriptors and their sizes.
218 */
219#define RX_NUM_FIFO 4
220#define RX_BUF_SIZE 32
221#define TX_NUM_FIFO 4
222#define TX_BUF_SIZE 32
223
224#define CONSOLE_NUM_FIFO 2
225#define CONSOLE_BUF_SIZE 4
226
227char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE];
228
229/* The async_struct in serial.h does not really give us what we
230 * need, so define our own here.
231 */
232typedef struct serial_info {
233 int magic;
234 int flags;
235
236 struct serial_state *state;
237 /* struct serial_struct *state; */
238 /* struct async_struct *state; */
239
240 struct tty_struct *tty;
241 int read_status_mask;
242 int ignore_status_mask;
243 int timeout;
244 int line;
245 int x_char; /* xon/xoff character */
246 int close_delay;
247 unsigned short closing_wait;
248 unsigned short closing_wait2;
249 unsigned long event;
250 unsigned long last_active;
251 int blocked_open; /* # of blocked opens */
252 struct work_struct tqueue;
253 struct work_struct tqueue_hangup;
254 wait_queue_head_t open_wait;
255 wait_queue_head_t close_wait;
256
257
258/* CPM Buffer Descriptor pointers.
259 */
260 QUICC_BD *rx_bd_base;
261 QUICC_BD *rx_cur;
262 QUICC_BD *tx_bd_base;
263 QUICC_BD *tx_cur;
264} ser_info_t;
265
266
267/* since kmalloc_init() does not get called until much after this initialization: */
268static ser_info_t quicc_ser_info[NR_PORTS];
269static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE];
270static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE];
271
272static void change_speed(ser_info_t *info);
273static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout);
274
275static inline int serial_paranoia_check(ser_info_t *info,
276 char *name, const char *routine)
277{
278#ifdef SERIAL_PARANOIA_CHECK
279 static const char *badmagic =
280 "Warning: bad magic number for serial struct (%s) in %s\n";
281 static const char *badinfo =
282 "Warning: null async_struct for (%s) in %s\n";
283
284 if (!info) {
285 printk(badinfo, name, routine);
286 return 1;
287 }
288 if (info->magic != SERIAL_MAGIC) {
289 printk(badmagic, name, routine);
290 return 1;
291 }
292#endif
293 return 0;
294}
295
296/*
297 * This is used to figure out the divisor speeds and the timeouts,
298 * indexed by the termio value. The generic CPM functions are responsible
299 * for setting and assigning baud rate generators for us.
300 */
301static int baud_table[] = {
302 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
303 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 };
304
305/* This sucks. There is a better way: */
306#if defined(CONFIG_CONSOLE_9600)
307 #define CONSOLE_BAUDRATE 9600
308#elif defined(CONFIG_CONSOLE_19200)
309 #define CONSOLE_BAUDRATE 19200
310#elif defined(CONFIG_CONSOLE_115200)
311 #define CONSOLE_BAUDRATE 115200
312#else
313 #warning "console baud rate undefined"
314 #define CONSOLE_BAUDRATE 9600
315#endif
316
317/*
318 * ------------------------------------------------------------
319 * rs_stop() and rs_start()
320 *
321 * This routines are called before setting or resetting tty->stopped.
322 * They enable or disable transmitter interrupts, as necessary.
323 * ------------------------------------------------------------
324 */
325static void rs_360_stop(struct tty_struct *tty)
326{
327 ser_info_t *info = (ser_info_t *)tty->driver_data;
328 int idx;
329 unsigned long flags;
330 volatile struct scc_regs *sccp;
331 volatile struct smc_regs *smcp;
332
333 if (serial_paranoia_check(info, tty->name, "rs_stop"))
334 return;
335
336 local_irq_save(flags);
337 idx = PORT_NUM(info->state->smc_scc_num);
338 if (info->state->smc_scc_num & NUM_IS_SCC) {
339 sccp = &pquicc->scc_regs[idx];
340 sccp->scc_sccm &= ~UART_SCCM_TX;
341 } else {
342 /* smcp = &cpmp->cp_smc[idx]; */
343 smcp = &pquicc->smc_regs[idx];
344 smcp->smc_smcm &= ~SMCM_TX;
345 }
346 local_irq_restore(flags);
347}
348
349
350static void rs_360_start(struct tty_struct *tty)
351{
352 ser_info_t *info = (ser_info_t *)tty->driver_data;
353 int idx;
354 unsigned long flags;
355 volatile struct scc_regs *sccp;
356 volatile struct smc_regs *smcp;
357
358 if (serial_paranoia_check(info, tty->name, "rs_stop"))
359 return;
360
361 local_irq_save(flags);
362 idx = PORT_NUM(info->state->smc_scc_num);
363 if (info->state->smc_scc_num & NUM_IS_SCC) {
364 sccp = &pquicc->scc_regs[idx];
365 sccp->scc_sccm |= UART_SCCM_TX;
366 } else {
367 smcp = &pquicc->smc_regs[idx];
368 smcp->smc_smcm |= SMCM_TX;
369 }
370 local_irq_restore(flags);
371}
372
373/*
374 * ----------------------------------------------------------------------
375 *
376 * Here starts the interrupt handling routines. All of the following
377 * subroutines are declared as inline and are folded into
378 * rs_interrupt(). They were separated out for readability's sake.
379 *
380 * Note: rs_interrupt() is a "fast" interrupt, which means that it
381 * runs with interrupts turned off. People who may want to modify
382 * rs_interrupt() should try to keep the interrupt handler as fast as
383 * possible. After you are done making modifications, it is not a bad
384 * idea to do:
385 *
386 * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
387 *
388 * and look at the resulting assemble code in serial.s.
389 *
390 * - Ted Ts'o (tytso@mit.edu), 7-Mar-93
391 * -----------------------------------------------------------------------
392 */
393
394static _INLINE_ void receive_chars(ser_info_t *info)
395{
396 struct tty_struct *tty = info->tty;
397 unsigned char ch, *cp;
398 /*int ignored = 0;*/
399 int i;
400 ushort status;
401 struct async_icount *icount;
402 /* struct async_icount_24 *icount; */
403 volatile QUICC_BD *bdp;
404
405 icount = &info->state->icount;
406
407 /* Just loop through the closed BDs and copy the characters into
408 * the buffer.
409 */
410 bdp = info->rx_cur;
411 for (;;) {
412 if (bdp->status & BD_SC_EMPTY) /* If this one is empty */
413 break; /* we are all done */
414
415 /* The read status mask tell us what we should do with
416 * incoming characters, especially if errors occur.
417 * One special case is the use of BD_SC_EMPTY. If
418 * this is not set, we are supposed to be ignoring
419 * inputs. In this case, just mark the buffer empty and
420 * continue.
421 */
422 if (!(info->read_status_mask & BD_SC_EMPTY)) {
423 bdp->status |= BD_SC_EMPTY;
424 bdp->status &=
425 ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
426
427 if (bdp->status & BD_SC_WRAP)
428 bdp = info->rx_bd_base;
429 else
430 bdp++;
431 continue;
432 }
433
434 /* Get the number of characters and the buffer pointer.
435 */
436 i = bdp->length;
437 /* cp = (unsigned char *)__va(bdp->buf); */
438 cp = (char *)bdp->buf;
439 status = bdp->status;
440
441 /* Check to see if there is room in the tty buffer for
442 * the characters in our BD buffer. If not, we exit
443 * now, leaving the BD with the characters. We'll pick
444 * them up again on the next receive interrupt (which could
445 * be a timeout).
446 */
447 if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE)
448 break;
449
450 while (i-- > 0) {
451 ch = *cp++;
452 *tty->flip.char_buf_ptr = ch;
453 icount->rx++;
454
455#ifdef SERIAL_DEBUG_INTR
456 printk("DR%02x:%02x...", ch, status);
457#endif
458 *tty->flip.flag_buf_ptr = 0;
459 if (status & (BD_SC_BR | BD_SC_FR |
460 BD_SC_PR | BD_SC_OV)) {
461 /*
462 * For statistics only
463 */
464 if (status & BD_SC_BR)
465 icount->brk++;
466 else if (status & BD_SC_PR)
467 icount->parity++;
468 else if (status & BD_SC_FR)
469 icount->frame++;
470 if (status & BD_SC_OV)
471 icount->overrun++;
472
473 /*
474 * Now check to see if character should be
475 * ignored, and mask off conditions which
476 * should be ignored.
477 if (status & info->ignore_status_mask) {
478 if (++ignored > 100)
479 break;
480 continue;
481 }
482 */
483 status &= info->read_status_mask;
484
485 if (status & (BD_SC_BR)) {
486#ifdef SERIAL_DEBUG_INTR
487 printk("handling break....");
488#endif
489 *tty->flip.flag_buf_ptr = TTY_BREAK;
490 if (info->flags & ASYNC_SAK)
491 do_SAK(tty);
492 } else if (status & BD_SC_PR)
493 *tty->flip.flag_buf_ptr = TTY_PARITY;
494 else if (status & BD_SC_FR)
495 *tty->flip.flag_buf_ptr = TTY_FRAME;
496 if (status & BD_SC_OV) {
497 /*
498 * Overrun is special, since it's
499 * reported immediately, and doesn't
500 * affect the current character
501 */
502 if (tty->flip.count < TTY_FLIPBUF_SIZE) {
503 tty->flip.count++;
504 tty->flip.flag_buf_ptr++;
505 tty->flip.char_buf_ptr++;
506 *tty->flip.flag_buf_ptr =
507 TTY_OVERRUN;
508 }
509 }
510 }
511 if (tty->flip.count >= TTY_FLIPBUF_SIZE)
512 break;
513
514 tty->flip.flag_buf_ptr++;
515 tty->flip.char_buf_ptr++;
516 tty->flip.count++;
517 }
518
519 /* This BD is ready to be used again. Clear status.
520 * Get next BD.
521 */
522 bdp->status |= BD_SC_EMPTY;
523 bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
524
525 if (bdp->status & BD_SC_WRAP)
526 bdp = info->rx_bd_base;
527 else
528 bdp++;
529 }
530
531 info->rx_cur = (QUICC_BD *)bdp;
532
533 schedule_work(&tty->flip.work);
534}
535
536static _INLINE_ void receive_break(ser_info_t *info)
537{
538 struct tty_struct *tty = info->tty;
539
540 info->state->icount.brk++;
541 /* Check to see if there is room in the tty buffer for
542 * the break. If not, we exit now, losing the break. FIXME
543 */
544 if ((tty->flip.count + 1) >= TTY_FLIPBUF_SIZE)
545 return;
546 *(tty->flip.flag_buf_ptr++) = TTY_BREAK;
547 *(tty->flip.char_buf_ptr++) = 0;
548 tty->flip.count++;
549
550 schedule_work(&tty->flip.work);
551}
552
553static _INLINE_ void transmit_chars(ser_info_t *info)
554{
555
556 if ((info->flags & TX_WAKEUP) ||
557 (info->tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
558 schedule_work(&info->tqueue);
559 }
560
561#ifdef SERIAL_DEBUG_INTR
562 printk("THRE...");
563#endif
564}
565
566#ifdef notdef
567 /* I need to do this for the SCCs, so it is left as a reminder.
568 */
569static _INLINE_ void check_modem_status(struct async_struct *info)
570{
571 int status;
572 /* struct async_icount *icount; */
573 struct async_icount_24 *icount;
574
575 status = serial_in(info, UART_MSR);
576
577 if (status & UART_MSR_ANY_DELTA) {
578 icount = &info->state->icount;
579 /* update input line counters */
580 if (status & UART_MSR_TERI)
581 icount->rng++;
582 if (status & UART_MSR_DDSR)
583 icount->dsr++;
584 if (status & UART_MSR_DDCD) {
585 icount->dcd++;
586#ifdef CONFIG_HARD_PPS
587 if ((info->flags & ASYNC_HARDPPS_CD) &&
588 (status & UART_MSR_DCD))
589 hardpps();
590#endif
591 }
592 if (status & UART_MSR_DCTS)
593 icount->cts++;
594 wake_up_interruptible(&info->delta_msr_wait);
595 }
596
597 if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
598#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
599 printk("ttys%d CD now %s...", info->line,
600 (status & UART_MSR_DCD) ? "on" : "off");
601#endif
602 if (status & UART_MSR_DCD)
603 wake_up_interruptible(&info->open_wait);
604 else {
605#ifdef SERIAL_DEBUG_OPEN
606 printk("scheduling hangup...");
607#endif
608 queue_task(&info->tqueue_hangup,
609 &tq_scheduler);
610 }
611 }
612 if (info->flags & ASYNC_CTS_FLOW) {
613 if (info->tty->hw_stopped) {
614 if (status & UART_MSR_CTS) {
615#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
616 printk("CTS tx start...");
617#endif
618 info->tty->hw_stopped = 0;
619 info->IER |= UART_IER_THRI;
620 serial_out(info, UART_IER, info->IER);
621 rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
622 return;
623 }
624 } else {
625 if (!(status & UART_MSR_CTS)) {
626#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
627 printk("CTS tx stop...");
628#endif
629 info->tty->hw_stopped = 1;
630 info->IER &= ~UART_IER_THRI;
631 serial_out(info, UART_IER, info->IER);
632 }
633 }
634 }
635}
636#endif
637
638/*
639 * This is the serial driver's interrupt routine for a single port
640 */
641/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */
642static void rs_360_interrupt(int vec, void *dev_id, struct pt_regs *fp)
643{
644 u_char events;
645 int idx;
646 ser_info_t *info;
647 volatile struct smc_regs *smcp;
648 volatile struct scc_regs *sccp;
649
650 info = (ser_info_t *)dev_id;
651
652 idx = PORT_NUM(info->state->smc_scc_num);
653 if (info->state->smc_scc_num & NUM_IS_SCC) {
654 sccp = &pquicc->scc_regs[idx];
655 events = sccp->scc_scce;
656 if (events & SCCM_RX)
657 receive_chars(info);
658 if (events & SCCM_TX)
659 transmit_chars(info);
660 sccp->scc_scce = events;
661 } else {
662 smcp = &pquicc->smc_regs[idx];
663 events = smcp->smc_smce;
664 if (events & SMCM_BRKE)
665 receive_break(info);
666 if (events & SMCM_RX)
667 receive_chars(info);
668 if (events & SMCM_TX)
669 transmit_chars(info);
670 smcp->smc_smce = events;
671 }
672
673#ifdef SERIAL_DEBUG_INTR
674 printk("rs_interrupt_single(%d, %x)...",
675 info->state->smc_scc_num, events);
676#endif
677#ifdef modem_control
678 check_modem_status(info);
679#endif
680 info->last_active = jiffies;
681#ifdef SERIAL_DEBUG_INTR
682 printk("end.\n");
683#endif
684}
685
686
687/*
688 * -------------------------------------------------------------------
689 * Here ends the serial interrupt routines.
690 * -------------------------------------------------------------------
691 */
692
693
694static void do_softint(void *private_)
695{
696 ser_info_t *info = (ser_info_t *) private_;
697 struct tty_struct *tty;
698
699 tty = info->tty;
700 if (!tty)
701 return;
702
703 if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
704 tty_wakeup(tty);
705}
706
707
708/*
709 * This routine is called from the scheduler tqueue when the interrupt
710 * routine has signalled that a hangup has occurred. The path of
711 * hangup processing is:
712 *
713 * serial interrupt routine -> (scheduler tqueue) ->
714 * do_serial_hangup() -> tty->hangup() -> rs_hangup()
715 *
716 */
717static void do_serial_hangup(void *private_)
718{
719 struct async_struct *info = (struct async_struct *) private_;
720 struct tty_struct *tty;
721
722 tty = info->tty;
723 if (!tty)
724 return;
725
726 tty_hangup(tty);
727}
728
729
730static int startup(ser_info_t *info)
731{
732 unsigned long flags;
733 int retval=0;
734 int idx;
735 /*struct serial_state *state = info->state;*/
736 volatile struct smc_regs *smcp;
737 volatile struct scc_regs *sccp;
738 volatile struct smc_uart_pram *up;
739 volatile struct uart_pram *scup;
740
741
742 local_irq_save(flags);
743
744 if (info->flags & ASYNC_INITIALIZED) {
745 goto errout;
746 }
747
748#ifdef maybe
749 if (!state->port || !state->type) {
750 if (info->tty)
751 set_bit(TTY_IO_ERROR, &info->tty->flags);
752 goto errout;
753 }
754#endif
755
756#ifdef SERIAL_DEBUG_OPEN
757 printk("starting up ttys%d (irq %d)...", info->line, state->irq);
758#endif
759
760
761#ifdef modem_control
762 info->MCR = 0;
763 if (info->tty->termios->c_cflag & CBAUD)
764 info->MCR = UART_MCR_DTR | UART_MCR_RTS;
765#endif
766
767 if (info->tty)
768 clear_bit(TTY_IO_ERROR, &info->tty->flags);
769
770 /*
771 * and set the speed of the serial port
772 */
773 change_speed(info);
774
775 idx = PORT_NUM(info->state->smc_scc_num);
776 if (info->state->smc_scc_num & NUM_IS_SCC) {
777 sccp = &pquicc->scc_regs[idx];
778 scup = &pquicc->pram[info->state->port].scc.pscc.u;
779
780 scup->mrblr = RX_BUF_SIZE;
781 scup->max_idl = RX_BUF_SIZE;
782
783 sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX);
784 sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
785
786 } else {
787 smcp = &pquicc->smc_regs[idx];
788
789 /* Enable interrupts and I/O.
790 */
791 smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
792 smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
793
794 /* We can tune the buffer length and idle characters
795 * to take advantage of the entire incoming buffer size.
796 * If mrblr is something other than 1, maxidl has to be
797 * non-zero or we never get an interrupt. The maxidl
798 * is the number of character times we wait after reception
799 * of the last character before we decide no more characters
800 * are coming.
801 */
802 /* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */
803 /* holy unionized structures, Batman: */
804 up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
805
806 up->mrblr = RX_BUF_SIZE;
807 up->max_idl = RX_BUF_SIZE;
808
809 up->brkcr = 1; /* number of break chars */
810 }
811
812 info->flags |= ASYNC_INITIALIZED;
813 local_irq_restore(flags);
814 return 0;
815
816errout:
817 local_irq_restore(flags);
818 return retval;
819}
820
821/*
822 * This routine will shutdown a serial port; interrupts are disabled, and
823 * DTR is dropped if the hangup on close termio flag is on.
824 */
825static void shutdown(ser_info_t *info)
826{
827 unsigned long flags;
828 struct serial_state *state;
829 int idx;
830 volatile struct smc_regs *smcp;
831 volatile struct scc_regs *sccp;
832
833 if (!(info->flags & ASYNC_INITIALIZED))
834 return;
835
836 state = info->state;
837
838#ifdef SERIAL_DEBUG_OPEN
839 printk("Shutting down serial port %d (irq %d)....", info->line,
840 state->irq);
841#endif
842
843 local_irq_save(flags);
844
845 idx = PORT_NUM(state->smc_scc_num);
846 if (state->smc_scc_num & NUM_IS_SCC) {
847 sccp = &pquicc->scc_regs[idx];
848 sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
849#ifdef CONFIG_SERIAL_CONSOLE
850 /* We can't disable the transmitter if this is the
851 * system console.
852 */
853 if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
854#endif
855 sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
856 } else {
857 smcp = &pquicc->smc_regs[idx];
858
859 /* Disable interrupts and I/O.
860 */
861 smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
862#ifdef CONFIG_SERIAL_CONSOLE
863 /* We can't disable the transmitter if this is the
864 * system console.
865 */
866 if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
867#endif
868 smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
869 }
870
871 if (info->tty)
872 set_bit(TTY_IO_ERROR, &info->tty->flags);
873
874 info->flags &= ~ASYNC_INITIALIZED;
875 local_irq_restore(flags);
876}
877
878/*
879 * This routine is called to set the UART divisor registers to match
880 * the specified baud rate for a serial port.
881 */
882static void change_speed(ser_info_t *info)
883{
884 int baud_rate;
885 unsigned cflag, cval, scval, prev_mode;
886 int i, bits, sbits, idx;
887 unsigned long flags;
888 struct serial_state *state;
889 volatile struct smc_regs *smcp;
890 volatile struct scc_regs *sccp;
891
892 if (!info->tty || !info->tty->termios)
893 return;
894 cflag = info->tty->termios->c_cflag;
895
896 state = info->state;
897
898 /* Character length programmed into the mode register is the
899 * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
900 * 1 or 2 stop bits, minus 1.
901 * The value 'bits' counts this for us.
902 */
903 cval = 0;
904 scval = 0;
905
906 /* byte size and parity */
907 switch (cflag & CSIZE) {
908 case CS5: bits = 5; break;
909 case CS6: bits = 6; break;
910 case CS7: bits = 7; break;
911 case CS8: bits = 8; break;
912 /* Never happens, but GCC is too dumb to figure it out */
913 default: bits = 8; break;
914 }
915 sbits = bits - 5;
916
917 if (cflag & CSTOPB) {
918 cval |= SMCMR_SL; /* Two stops */
919 scval |= SCU_PMSR_SL;
920 bits++;
921 }
922 if (cflag & PARENB) {
923 cval |= SMCMR_PEN;
924 scval |= SCU_PMSR_PEN;
925 bits++;
926 }
927 if (!(cflag & PARODD)) {
928 cval |= SMCMR_PM_EVEN;
929 scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP);
930 }
931
932 /* Determine divisor based on baud rate */
933 i = cflag & CBAUD;
934 if (i >= (sizeof(baud_table)/sizeof(int)))
935 baud_rate = 9600;
936 else
937 baud_rate = baud_table[i];
938
939 info->timeout = (TX_BUF_SIZE*HZ*bits);
940 info->timeout += HZ/50; /* Add .02 seconds of slop */
941
942#ifdef modem_control
943 /* CTS flow control flag and modem status interrupts */
944 info->IER &= ~UART_IER_MSI;
945 if (info->flags & ASYNC_HARDPPS_CD)
946 info->IER |= UART_IER_MSI;
947 if (cflag & CRTSCTS) {
948 info->flags |= ASYNC_CTS_FLOW;
949 info->IER |= UART_IER_MSI;
950 } else
951 info->flags &= ~ASYNC_CTS_FLOW;
952 if (cflag & CLOCAL)
953 info->flags &= ~ASYNC_CHECK_CD;
954 else {
955 info->flags |= ASYNC_CHECK_CD;
956 info->IER |= UART_IER_MSI;
957 }
958 serial_out(info, UART_IER, info->IER);
959#endif
960
961 /*
962 * Set up parity check flag
963 */
964#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
965
966 info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
967 if (I_INPCK(info->tty))
968 info->read_status_mask |= BD_SC_FR | BD_SC_PR;
969 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
970 info->read_status_mask |= BD_SC_BR;
971
972 /*
973 * Characters to ignore
974 */
975 info->ignore_status_mask = 0;
976 if (I_IGNPAR(info->tty))
977 info->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
978 if (I_IGNBRK(info->tty)) {
979 info->ignore_status_mask |= BD_SC_BR;
980 /*
981 * If we're ignore parity and break indicators, ignore
982 * overruns too. (For real raw support).
983 */
984 if (I_IGNPAR(info->tty))
985 info->ignore_status_mask |= BD_SC_OV;
986 }
987 /*
988 * !!! ignore all characters if CREAD is not set
989 */
990 if ((cflag & CREAD) == 0)
991 info->read_status_mask &= ~BD_SC_EMPTY;
992 local_irq_save(flags);
993
994 /* Start bit has not been added (so don't, because we would just
995 * subtract it later), and we need to add one for the number of
996 * stops bits (there is always at least one).
997 */
998 bits++;
999 idx = PORT_NUM(state->smc_scc_num);
1000 if (state->smc_scc_num & NUM_IS_SCC) {
1001 sccp = &pquicc->scc_regs[idx];
1002 sccp->scc_psmr = (sbits << 12) | scval;
1003 } else {
1004 smcp = &pquicc->smc_regs[idx];
1005
1006 /* Set the mode register. We want to keep a copy of the
1007 * enables, because we want to put them back if they were
1008 * present.
1009 */
1010 prev_mode = smcp->smc_smcmr;
1011 smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART;
1012 smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
1013 }
1014
1015 m360_cpm_setbrg((state - rs_table), baud_rate);
1016
1017 local_irq_restore(flags);
1018}
1019
1020static void rs_360_put_char(struct tty_struct *tty, unsigned char ch)
1021{
1022 ser_info_t *info = (ser_info_t *)tty->driver_data;
1023 volatile QUICC_BD *bdp;
1024
1025 if (serial_paranoia_check(info, tty->name, "rs_put_char"))
1026 return;
1027
1028 if (!tty)
1029 return;
1030
1031 bdp = info->tx_cur;
1032 while (bdp->status & BD_SC_READY);
1033
1034 /* *((char *)__va(bdp->buf)) = ch; */
1035 *((char *)bdp->buf) = ch;
1036 bdp->length = 1;
1037 bdp->status |= BD_SC_READY;
1038
1039 /* Get next BD.
1040 */
1041 if (bdp->status & BD_SC_WRAP)
1042 bdp = info->tx_bd_base;
1043 else
1044 bdp++;
1045
1046 info->tx_cur = (QUICC_BD *)bdp;
1047
1048}
1049
1050static int rs_360_write(struct tty_struct * tty,
1051 const unsigned char *buf, int count)
1052{
1053 int c, ret = 0;
1054 ser_info_t *info = (ser_info_t *)tty->driver_data;
1055 volatile QUICC_BD *bdp;
1056
1057#ifdef CONFIG_KGDB
1058 /* Try to let stub handle output. Returns true if it did. */
1059 if (kgdb_output_string(buf, count))
1060 return ret;
1061#endif
1062
1063 if (serial_paranoia_check(info, tty->name, "rs_write"))
1064 return 0;
1065
1066 if (!tty)
1067 return 0;
1068
1069 bdp = info->tx_cur;
1070
1071 while (1) {
1072 c = min(count, TX_BUF_SIZE);
1073
1074 if (c <= 0)
1075 break;
1076
1077 if (bdp->status & BD_SC_READY) {
1078 info->flags |= TX_WAKEUP;
1079 break;
1080 }
1081
1082 /* memcpy(__va(bdp->buf), buf, c); */
1083 memcpy((void *)bdp->buf, buf, c);
1084
1085 bdp->length = c;
1086 bdp->status |= BD_SC_READY;
1087
1088 buf += c;
1089 count -= c;
1090 ret += c;
1091
1092 /* Get next BD.
1093 */
1094 if (bdp->status & BD_SC_WRAP)
1095 bdp = info->tx_bd_base;
1096 else
1097 bdp++;
1098 info->tx_cur = (QUICC_BD *)bdp;
1099 }
1100 return ret;
1101}
1102
1103static int rs_360_write_room(struct tty_struct *tty)
1104{
1105 ser_info_t *info = (ser_info_t *)tty->driver_data;
1106 int ret;
1107
1108 if (serial_paranoia_check(info, tty->name, "rs_write_room"))
1109 return 0;
1110
1111 if ((info->tx_cur->status & BD_SC_READY) == 0) {
1112 info->flags &= ~TX_WAKEUP;
1113 ret = TX_BUF_SIZE;
1114 }
1115 else {
1116 info->flags |= TX_WAKEUP;
1117 ret = 0;
1118 }
1119 return ret;
1120}
1121
1122/* I could track this with transmit counters....maybe later.
1123*/
1124static int rs_360_chars_in_buffer(struct tty_struct *tty)
1125{
1126 ser_info_t *info = (ser_info_t *)tty->driver_data;
1127
1128 if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
1129 return 0;
1130 return 0;
1131}
1132
1133static void rs_360_flush_buffer(struct tty_struct *tty)
1134{
1135 ser_info_t *info = (ser_info_t *)tty->driver_data;
1136
1137 if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
1138 return;
1139
1140 /* There is nothing to "flush", whatever we gave the CPM
1141 * is on its way out.
1142 */
1143 tty_wakeup(tty);
1144 info->flags &= ~TX_WAKEUP;
1145}
1146
1147/*
1148 * This function is used to send a high-priority XON/XOFF character to
1149 * the device
1150 */
1151static void rs_360_send_xchar(struct tty_struct *tty, char ch)
1152{
1153 volatile QUICC_BD *bdp;
1154
1155 ser_info_t *info = (ser_info_t *)tty->driver_data;
1156
1157 if (serial_paranoia_check(info, tty->name, "rs_send_char"))
1158 return;
1159
1160 bdp = info->tx_cur;
1161 while (bdp->status & BD_SC_READY);
1162
1163 /* *((char *)__va(bdp->buf)) = ch; */
1164 *((char *)bdp->buf) = ch;
1165 bdp->length = 1;
1166 bdp->status |= BD_SC_READY;
1167
1168 /* Get next BD.
1169 */
1170 if (bdp->status & BD_SC_WRAP)
1171 bdp = info->tx_bd_base;
1172 else
1173 bdp++;
1174
1175 info->tx_cur = (QUICC_BD *)bdp;
1176}
1177
1178/*
1179 * ------------------------------------------------------------
1180 * rs_throttle()
1181 *
1182 * This routine is called by the upper-layer tty layer to signal that
1183 * incoming characters should be throttled.
1184 * ------------------------------------------------------------
1185 */
1186static void rs_360_throttle(struct tty_struct * tty)
1187{
1188 ser_info_t *info = (ser_info_t *)tty->driver_data;
1189#ifdef SERIAL_DEBUG_THROTTLE
1190 char buf[64];
1191
1192 printk("throttle %s: %d....\n", _tty_name(tty, buf),
1193 tty->ldisc.chars_in_buffer(tty));
1194#endif
1195
1196 if (serial_paranoia_check(info, tty->name, "rs_throttle"))
1197 return;
1198
1199 if (I_IXOFF(tty))
1200 rs_360_send_xchar(tty, STOP_CHAR(tty));
1201
1202#ifdef modem_control
1203 if (tty->termios->c_cflag & CRTSCTS)
1204 info->MCR &= ~UART_MCR_RTS;
1205
1206 local_irq_disable();
1207 serial_out(info, UART_MCR, info->MCR);
1208 local_irq_enable();
1209#endif
1210}
1211
1212static void rs_360_unthrottle(struct tty_struct * tty)
1213{
1214 ser_info_t *info = (ser_info_t *)tty->driver_data;
1215#ifdef SERIAL_DEBUG_THROTTLE
1216 char buf[64];
1217
1218 printk("unthrottle %s: %d....\n", _tty_name(tty, buf),
1219 tty->ldisc.chars_in_buffer(tty));
1220#endif
1221
1222 if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
1223 return;
1224
1225 if (I_IXOFF(tty)) {
1226 if (info->x_char)
1227 info->x_char = 0;
1228 else
1229 rs_360_send_xchar(tty, START_CHAR(tty));
1230 }
1231#ifdef modem_control
1232 if (tty->termios->c_cflag & CRTSCTS)
1233 info->MCR |= UART_MCR_RTS;
1234 local_irq_disable();
1235 serial_out(info, UART_MCR, info->MCR);
1236 local_irq_enable();
1237#endif
1238}
1239
1240/*
1241 * ------------------------------------------------------------
1242 * rs_ioctl() and friends
1243 * ------------------------------------------------------------
1244 */
1245
1246#ifdef maybe
1247/*
1248 * get_lsr_info - get line status register info
1249 *
1250 * Purpose: Let user call ioctl() to get info when the UART physically
1251 * is emptied. On bus types like RS485, the transmitter must
1252 * release the bus after transmitting. This must be done when
1253 * the transmit shift register is empty, not be done when the
1254 * transmit holding register is empty. This functionality
1255 * allows an RS485 driver to be written in user space.
1256 */
1257static int get_lsr_info(struct async_struct * info, unsigned int *value)
1258{
1259 unsigned char status;
1260 unsigned int result;
1261
1262 local_irq_disable();
1263 status = serial_in(info, UART_LSR);
1264 local_irq_enable();
1265 result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
1266 return put_user(result,value);
1267}
1268#endif
1269
1270static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
1271{
1272 ser_info_t *info = (ser_info_t *)tty->driver_data;
1273 unsigned int result = 0;
1274#ifdef modem_control
1275 unsigned char control, status;
1276
1277 if (serial_paranoia_check(info, tty->name, __FUNCTION__))
1278 return -ENODEV;
1279
1280 if (tty->flags & (1 << TTY_IO_ERROR))
1281 return -EIO;
1282
1283 control = info->MCR;
1284 local_irq_disable();
1285 status = serial_in(info, UART_MSR);
1286 local_irq_enable();
1287 result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
1288 | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
1289#ifdef TIOCM_OUT1
1290 | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0)
1291 | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0)
1292#endif
1293 | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
1294 | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
1295 | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
1296 | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
1297#endif
1298 return result;
1299}
1300
1301static int rs_360_tiocmset(struct tty_struct *tty, struct file *file,
1302 unsigned int set, unsigned int clear)
1303{
1304#ifdef modem_control
1305 ser_info_t *info = (ser_info_t *)tty->driver_data;
1306 unsigned int arg;
1307
1308 if (serial_paranoia_check(info, tty->name, __FUNCTION__))
1309 return -ENODEV;
1310
1311 if (tty->flags & (1 << TTY_IO_ERROR))
1312 return -EIO;
1313
1314 if (set & TIOCM_RTS)
1315 info->mcr |= UART_MCR_RTS;
1316 if (set & TIOCM_DTR)
1317 info->mcr |= UART_MCR_DTR;
1318 if (clear & TIOCM_RTS)
1319 info->MCR &= ~UART_MCR_RTS;
1320 if (clear & TIOCM_DTR)
1321 info->MCR &= ~UART_MCR_DTR;
1322
1323#ifdef TIOCM_OUT1
1324 if (set & TIOCM_OUT1)
1325 info->MCR |= UART_MCR_OUT1;
1326 if (set & TIOCM_OUT2)
1327 info->MCR |= UART_MCR_OUT2;
1328 if (clear & TIOCM_OUT1)
1329 info->MCR &= ~UART_MCR_OUT1;
1330 if (clear & TIOCM_OUT2)
1331 info->MCR &= ~UART_MCR_OUT2;
1332#endif
1333
1334 local_irq_disable();
1335 serial_out(info, UART_MCR, info->MCR);
1336 local_irq_enable();
1337#endif
1338 return 0;
1339}
1340
1341/* Sending a break is a two step process on the SMC/SCC. It is accomplished
1342 * by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT
1343 * command. We take advantage of the begin/end functions to make this
1344 * happen.
1345 */
1346static ushort smc_chan_map[] = {
1347 CPM_CR_CH_SMC1,
1348 CPM_CR_CH_SMC2
1349};
1350
1351static ushort scc_chan_map[] = {
1352 CPM_CR_CH_SCC1,
1353 CPM_CR_CH_SCC2,
1354 CPM_CR_CH_SCC3,
1355 CPM_CR_CH_SCC4
1356};
1357
1358static void begin_break(ser_info_t *info)
1359{
1360 volatile QUICC *cp;
1361 ushort chan;
1362 int idx;
1363
1364 cp = pquicc;
1365
1366 idx = PORT_NUM(info->state->smc_scc_num);
1367 if (info->state->smc_scc_num & NUM_IS_SCC)
1368 chan = scc_chan_map[idx];
1369 else
1370 chan = smc_chan_map[idx];
1371
1372 cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG;
1373 while (cp->cp_cr & CPM_CR_FLG);
1374}
1375
1376static void end_break(ser_info_t *info)
1377{
1378 volatile QUICC *cp;
1379 ushort chan;
1380 int idx;
1381
1382 cp = pquicc;
1383
1384 idx = PORT_NUM(info->state->smc_scc_num);
1385 if (info->state->smc_scc_num & NUM_IS_SCC)
1386 chan = scc_chan_map[idx];
1387 else
1388 chan = smc_chan_map[idx];
1389
1390 cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG;
1391 while (cp->cp_cr & CPM_CR_FLG);
1392}
1393
1394/*
1395 * This routine sends a break character out the serial port.
1396 */
1397static void send_break(ser_info_t *info, int duration)
1398{
1399 set_current_state(TASK_INTERRUPTIBLE);
1400#ifdef SERIAL_DEBUG_SEND_BREAK
1401 printk("rs_send_break(%d) jiff=%lu...", duration, jiffies);
1402#endif
1403 begin_break(info);
1404 schedule_timeout(duration);
1405 end_break(info);
1406#ifdef SERIAL_DEBUG_SEND_BREAK
1407 printk("done jiffies=%lu\n", jiffies);
1408#endif
1409}
1410
1411
1412static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
1413 unsigned int cmd, unsigned long arg)
1414{
1415 int error;
1416 ser_info_t *info = (ser_info_t *)tty->driver_data;
1417 int retval;
1418 struct async_icount cnow;
1419 /* struct async_icount_24 cnow;*/ /* kernel counter temps */
1420 struct serial_icounter_struct *p_cuser; /* user space */
1421
1422 if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
1423 return -ENODEV;
1424
1425 if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1426 if (tty->flags & (1 << TTY_IO_ERROR))
1427 return -EIO;
1428 }
1429
1430 switch (cmd) {
1431 case TCSBRK: /* SVID version: non-zero arg --> no break */
1432 retval = tty_check_change(tty);
1433 if (retval)
1434 return retval;
1435 tty_wait_until_sent(tty, 0);
1436 if (signal_pending(current))
1437 return -EINTR;
1438 if (!arg) {
1439 send_break(info, HZ/4); /* 1/4 second */
1440 if (signal_pending(current))
1441 return -EINTR;
1442 }
1443 return 0;
1444 case TCSBRKP: /* support for POSIX tcsendbreak() */
1445 retval = tty_check_change(tty);
1446 if (retval)
1447 return retval;
1448 tty_wait_until_sent(tty, 0);
1449 if (signal_pending(current))
1450 return -EINTR;
1451 send_break(info, arg ? arg*(HZ/10) : HZ/4);
1452 if (signal_pending(current))
1453 return -EINTR;
1454 return 0;
1455 case TIOCSBRK:
1456 retval = tty_check_change(tty);
1457 if (retval)
1458 return retval;
1459 tty_wait_until_sent(tty, 0);
1460 begin_break(info);
1461 return 0;
1462 case TIOCCBRK:
1463 retval = tty_check_change(tty);
1464 if (retval)
1465 return retval;
1466 end_break(info);
1467 return 0;
1468 case TIOCGSOFTCAR:
1469 /* return put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg); */
1470 put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg);
1471 return 0;
1472 case TIOCSSOFTCAR:
1473 error = get_user(arg, (unsigned int *) arg);
1474 if (error)
1475 return error;
1476 tty->termios->c_cflag =
1477 ((tty->termios->c_cflag & ~CLOCAL) |
1478 (arg ? CLOCAL : 0));
1479 return 0;
1480#ifdef maybe
1481 case TIOCSERGETLSR: /* Get line status register */
1482 return get_lsr_info(info, (unsigned int *) arg);
1483#endif
1484 /*
1485 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
1486 * - mask passed in arg for lines of interest
1487 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
1488 * Caller should use TIOCGICOUNT to see which one it was
1489 */
1490 case TIOCMIWAIT:
1491#ifdef modem_control
1492 local_irq_disable();
1493 /* note the counters on entry */
1494 cprev = info->state->icount;
1495 local_irq_enable();
1496 while (1) {
1497 interruptible_sleep_on(&info->delta_msr_wait);
1498 /* see if a signal did it */
1499 if (signal_pending(current))
1500 return -ERESTARTSYS;
1501 local_irq_disable();
1502 cnow = info->state->icount; /* atomic copy */
1503 local_irq_enable();
1504 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
1505 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
1506 return -EIO; /* no change => error */
1507 if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
1508 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
1509 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
1510 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
1511 return 0;
1512 }
1513 cprev = cnow;
1514 }
1515 /* NOTREACHED */
1516#else
1517 return 0;
1518#endif
1519
1520 /*
1521 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1522 * Return: write counters to the user passed counter struct
1523 * NB: both 1->0 and 0->1 transitions are counted except for
1524 * RI where only 0->1 is counted.
1525 */
1526 case TIOCGICOUNT:
1527 local_irq_disable();
1528 cnow = info->state->icount;
1529 local_irq_enable();
1530 p_cuser = (struct serial_icounter_struct *) arg;
1531/* error = put_user(cnow.cts, &p_cuser->cts); */
1532/* if (error) return error; */
1533/* error = put_user(cnow.dsr, &p_cuser->dsr); */
1534/* if (error) return error; */
1535/* error = put_user(cnow.rng, &p_cuser->rng); */
1536/* if (error) return error; */
1537/* error = put_user(cnow.dcd, &p_cuser->dcd); */
1538/* if (error) return error; */
1539
1540 put_user(cnow.cts, &p_cuser->cts);
1541 put_user(cnow.dsr, &p_cuser->dsr);
1542 put_user(cnow.rng, &p_cuser->rng);
1543 put_user(cnow.dcd, &p_cuser->dcd);
1544 return 0;
1545
1546 default:
1547 return -ENOIOCTLCMD;
1548 }
1549 return 0;
1550}
1551
1552/* FIX UP modem control here someday......
1553*/
1554static void rs_360_set_termios(struct tty_struct *tty, struct termios *old_termios)
1555{
1556 ser_info_t *info = (ser_info_t *)tty->driver_data;
1557
1558 if ( (tty->termios->c_cflag == old_termios->c_cflag)
1559 && ( RELEVANT_IFLAG(tty->termios->c_iflag)
1560 == RELEVANT_IFLAG(old_termios->c_iflag)))
1561 return;
1562
1563 change_speed(info);
1564
1565#ifdef modem_control
1566 /* Handle transition to B0 status */
1567 if ((old_termios->c_cflag & CBAUD) &&
1568 !(tty->termios->c_cflag & CBAUD)) {
1569 info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
1570 local_irq_disable();
1571 serial_out(info, UART_MCR, info->MCR);
1572 local_irq_enable();
1573 }
1574
1575 /* Handle transition away from B0 status */
1576 if (!(old_termios->c_cflag & CBAUD) &&
1577 (tty->termios->c_cflag & CBAUD)) {
1578 info->MCR |= UART_MCR_DTR;
1579 if (!tty->hw_stopped ||
1580 !(tty->termios->c_cflag & CRTSCTS)) {
1581 info->MCR |= UART_MCR_RTS;
1582 }
1583 local_irq_disable();
1584 serial_out(info, UART_MCR, info->MCR);
1585 local_irq_enable();
1586 }
1587
1588 /* Handle turning off CRTSCTS */
1589 if ((old_termios->c_cflag & CRTSCTS) &&
1590 !(tty->termios->c_cflag & CRTSCTS)) {
1591 tty->hw_stopped = 0;
1592 rs_360_start(tty);
1593 }
1594#endif
1595
1596#if 0
1597 /*
1598 * No need to wake up processes in open wait, since they
1599 * sample the CLOCAL flag once, and don't recheck it.
1600 * XXX It's not clear whether the current behavior is correct
1601 * or not. Hence, this may change.....
1602 */
1603 if (!(old_termios->c_cflag & CLOCAL) &&
1604 (tty->termios->c_cflag & CLOCAL))
1605 wake_up_interruptible(&info->open_wait);
1606#endif
1607}
1608
1609/*
1610 * ------------------------------------------------------------
1611 * rs_close()
1612 *
1613 * This routine is called when the serial port gets closed. First, we
1614 * wait for the last remaining data to be sent. Then, we unlink its
1615 * async structure from the interrupt chain if necessary, and we free
1616 * that IRQ if nothing is left in the chain.
1617 * ------------------------------------------------------------
1618 */
1619static void rs_360_close(struct tty_struct *tty, struct file * filp)
1620{
1621 ser_info_t *info = (ser_info_t *)tty->driver_data;
1622 /* struct async_state *state; */
1623 struct serial_state *state;
1624 unsigned long flags;
1625 int idx;
1626 volatile struct smc_regs *smcp;
1627 volatile struct scc_regs *sccp;
1628
1629 if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
1630 return;
1631
1632 state = info->state;
1633
1634 local_irq_save(flags);
1635
1636 if (tty_hung_up_p(filp)) {
1637 DBG_CNT("before DEC-hung");
1638 local_irq_restore(flags);
1639 return;
1640 }
1641
1642#ifdef SERIAL_DEBUG_OPEN
1643 printk("rs_close ttys%d, count = %d\n", info->line, state->count);
1644#endif
1645 if ((tty->count == 1) && (state->count != 1)) {
1646 /*
1647 * Uh, oh. tty->count is 1, which means that the tty
1648 * structure will be freed. state->count should always
1649 * be one in these conditions. If it's greater than
1650 * one, we've got real problems, since it means the
1651 * serial port won't be shutdown.
1652 */
1653 printk("rs_close: bad serial port count; tty->count is 1, "
1654 "state->count is %d\n", state->count);
1655 state->count = 1;
1656 }
1657 if (--state->count < 0) {
1658 printk("rs_close: bad serial port count for ttys%d: %d\n",
1659 info->line, state->count);
1660 state->count = 0;
1661 }
1662 if (state->count) {
1663 DBG_CNT("before DEC-2");
1664 local_irq_restore(flags);
1665 return;
1666 }
1667 info->flags |= ASYNC_CLOSING;
1668 /*
1669 * Now we wait for the transmit buffer to clear; and we notify
1670 * the line discipline to only process XON/XOFF characters.
1671 */
1672 tty->closing = 1;
1673 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
1674 tty_wait_until_sent(tty, info->closing_wait);
1675 /*
1676 * At this point we stop accepting input. To do this, we
1677 * disable the receive line status interrupts, and tell the
1678 * interrupt driver to stop checking the data ready bit in the
1679 * line status register.
1680 */
1681 info->read_status_mask &= ~BD_SC_EMPTY;
1682 if (info->flags & ASYNC_INITIALIZED) {
1683
1684 idx = PORT_NUM(info->state->smc_scc_num);
1685 if (info->state->smc_scc_num & NUM_IS_SCC) {
1686 sccp = &pquicc->scc_regs[idx];
1687 sccp->scc_sccm &= ~UART_SCCM_RX;
1688 sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR;
1689 } else {
1690 smcp = &pquicc->smc_regs[idx];
1691 smcp->smc_smcm &= ~SMCM_RX;
1692 smcp->smc_smcmr &= ~SMCMR_REN;
1693 }
1694 /*
1695 * Before we drop DTR, make sure the UART transmitter
1696 * has completely drained; this is especially
1697 * important if there is a transmit FIFO!
1698 */
1699 rs_360_wait_until_sent(tty, info->timeout);
1700 }
1701 shutdown(info);
1702 if (tty->driver->flush_buffer)
1703 tty->driver->flush_buffer(tty);
1704 tty_ldisc_flush(tty);
1705 tty->closing = 0;
1706 info->event = 0;
1707 info->tty = 0;
1708 if (info->blocked_open) {
1709 if (info->close_delay) {
1710 msleep_interruptible(jiffies_to_msecs(info->close_delay));
1711 }
1712 wake_up_interruptible(&info->open_wait);
1713 }
1714 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
1715 wake_up_interruptible(&info->close_wait);
1716 local_irq_restore(flags);
1717}
1718
1719/*
1720 * rs_wait_until_sent() --- wait until the transmitter is empty
1721 */
1722static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
1723{
1724 ser_info_t *info = (ser_info_t *)tty->driver_data;
1725 unsigned long orig_jiffies, char_time;
1726 /*int lsr;*/
1727 volatile QUICC_BD *bdp;
1728
1729 if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
1730 return;
1731
1732#ifdef maybe
1733 if (info->state->type == PORT_UNKNOWN)
1734 return;
1735#endif
1736
1737 orig_jiffies = jiffies;
1738 /*
1739 * Set the check interval to be 1/5 of the estimated time to
1740 * send a single character, and make it at least 1. The check
1741 * interval should also be less than the timeout.
1742 *
1743 * Note: we have to use pretty tight timings here to satisfy
1744 * the NIST-PCTS.
1745 */
1746 char_time = 1;
1747 if (timeout)
1748 char_time = min(char_time, (unsigned long)timeout);
1749#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
1750 printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
1751 printk("jiff=%lu...", jiffies);
1752#endif
1753
1754 /* We go through the loop at least once because we can't tell
1755 * exactly when the last character exits the shifter. There can
1756 * be at least two characters waiting to be sent after the buffers
1757 * are empty.
1758 */
1759 do {
1760#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
1761 printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
1762#endif
1763/* current->counter = 0; make us low-priority */
1764 msleep_interruptible(jiffies_to_msecs(char_time));
1765 if (signal_pending(current))
1766 break;
1767 if (timeout && ((orig_jiffies + timeout) < jiffies))
1768 break;
1769 /* The 'tx_cur' is really the next buffer to send. We
1770 * have to back up to the previous BD and wait for it
1771 * to go. This isn't perfect, because all this indicates
1772 * is the buffer is available. There are still characters
1773 * in the CPM FIFO.
1774 */
1775 bdp = info->tx_cur;
1776 if (bdp == info->tx_bd_base)
1777 bdp += (TX_NUM_FIFO-1);
1778 else
1779 bdp--;
1780 } while (bdp->status & BD_SC_READY);
1781 current->state = TASK_RUNNING;
1782#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
1783 printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
1784#endif
1785}
1786
1787/*
1788 * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
1789 */
1790static void rs_360_hangup(struct tty_struct *tty)
1791{
1792 ser_info_t *info = (ser_info_t *)tty->driver_data;
1793 struct serial_state *state = info->state;
1794
1795 if (serial_paranoia_check(info, tty->name, "rs_hangup"))
1796 return;
1797
1798 state = info->state;
1799
1800 rs_360_flush_buffer(tty);
1801 shutdown(info);
1802 info->event = 0;
1803 state->count = 0;
1804 info->flags &= ~ASYNC_NORMAL_ACTIVE;
1805 info->tty = 0;
1806 wake_up_interruptible(&info->open_wait);
1807}
1808
1809/*
1810 * ------------------------------------------------------------
1811 * rs_open() and friends
1812 * ------------------------------------------------------------
1813 */
1814static int block_til_ready(struct tty_struct *tty, struct file * filp,
1815 ser_info_t *info)
1816{
1817#ifdef DO_THIS_LATER
1818 DECLARE_WAITQUEUE(wait, current);
1819#endif
1820 struct serial_state *state = info->state;
1821 int retval;
1822 int do_clocal = 0;
1823
1824 /*
1825 * If the device is in the middle of being closed, then block
1826 * until it's done, and then try again.
1827 */
1828 if (tty_hung_up_p(filp) ||
1829 (info->flags & ASYNC_CLOSING)) {
1830 if (info->flags & ASYNC_CLOSING)
1831 interruptible_sleep_on(&info->close_wait);
1832#ifdef SERIAL_DO_RESTART
1833 if (info->flags & ASYNC_HUP_NOTIFY)
1834 return -EAGAIN;
1835 else
1836 return -ERESTARTSYS;
1837#else
1838 return -EAGAIN;
1839#endif
1840 }
1841
1842 /*
1843 * If non-blocking mode is set, or the port is not enabled,
1844 * then make the check up front and then exit.
1845 * If this is an SMC port, we don't have modem control to wait
1846 * for, so just get out here.
1847 */
1848 if ((filp->f_flags & O_NONBLOCK) ||
1849 (tty->flags & (1 << TTY_IO_ERROR)) ||
1850 !(info->state->smc_scc_num & NUM_IS_SCC)) {
1851 info->flags |= ASYNC_NORMAL_ACTIVE;
1852 return 0;
1853 }
1854
1855 if (tty->termios->c_cflag & CLOCAL)
1856 do_clocal = 1;
1857
1858 /*
1859 * Block waiting for the carrier detect and the line to become
1860 * free (i.e., not in use by the callout). While we are in
1861 * this loop, state->count is dropped by one, so that
1862 * rs_close() knows when to free things. We restore it upon
1863 * exit, either normal or abnormal.
1864 */
1865 retval = 0;
1866#ifdef DO_THIS_LATER
1867 add_wait_queue(&info->open_wait, &wait);
1868#ifdef SERIAL_DEBUG_OPEN
1869 printk("block_til_ready before block: ttys%d, count = %d\n",
1870 state->line, state->count);
1871#endif
1872 local_irq_disable();
1873 if (!tty_hung_up_p(filp))
1874 state->count--;
1875 local_irq_enable();
1876 info->blocked_open++;
1877 while (1) {
1878 local_irq_disable();
1879 if (tty->termios->c_cflag & CBAUD)
1880 serial_out(info, UART_MCR,
1881 serial_inp(info, UART_MCR) |
1882 (UART_MCR_DTR | UART_MCR_RTS));
1883 local_irq_enable();
1884 set_current_state(TASK_INTERRUPTIBLE);
1885 if (tty_hung_up_p(filp) ||
1886 !(info->flags & ASYNC_INITIALIZED)) {
1887#ifdef SERIAL_DO_RESTART
1888 if (info->flags & ASYNC_HUP_NOTIFY)
1889 retval = -EAGAIN;
1890 else
1891 retval = -ERESTARTSYS;
1892#else
1893 retval = -EAGAIN;
1894#endif
1895 break;
1896 }
1897 if (!(info->flags & ASYNC_CLOSING) &&
1898 (do_clocal || (serial_in(info, UART_MSR) &
1899 UART_MSR_DCD)))
1900 break;
1901 if (signal_pending(current)) {
1902 retval = -ERESTARTSYS;
1903 break;
1904 }
1905#ifdef SERIAL_DEBUG_OPEN
1906 printk("block_til_ready blocking: ttys%d, count = %d\n",
1907 info->line, state->count);
1908#endif
1909 schedule();
1910 }
1911 current->state = TASK_RUNNING;
1912 remove_wait_queue(&info->open_wait, &wait);
1913 if (!tty_hung_up_p(filp))
1914 state->count++;
1915 info->blocked_open--;
1916#ifdef SERIAL_DEBUG_OPEN
1917 printk("block_til_ready after blocking: ttys%d, count = %d\n",
1918 info->line, state->count);
1919#endif
1920#endif /* DO_THIS_LATER */
1921 if (retval)
1922 return retval;
1923 info->flags |= ASYNC_NORMAL_ACTIVE;
1924 return 0;
1925}
1926
1927static int get_async_struct(int line, ser_info_t **ret_info)
1928{
1929 struct serial_state *sstate;
1930
1931 sstate = rs_table + line;
1932 if (sstate->info) {
1933 sstate->count++;
1934 *ret_info = (ser_info_t *)sstate->info;
1935 return 0;
1936 }
1937 else {
1938 return -ENOMEM;
1939 }
1940}
1941
1942/*
1943 * This routine is called whenever a serial port is opened. It
1944 * enables interrupts for a serial port, linking in its async structure into
1945 * the IRQ chain. It also performs the serial-specific
1946 * initialization for the tty structure.
1947 */
1948static int rs_360_open(struct tty_struct *tty, struct file * filp)
1949{
1950 ser_info_t *info;
1951 int retval, line;
1952
1953 line = tty->index;
1954 if ((line < 0) || (line >= NR_PORTS))
1955 return -ENODEV;
1956 retval = get_async_struct(line, &info);
1957 if (retval)
1958 return retval;
1959 if (serial_paranoia_check(info, tty->name, "rs_open"))
1960 return -ENODEV;
1961
1962#ifdef SERIAL_DEBUG_OPEN
1963 printk("rs_open %s, count = %d\n", tty->name, info->state->count);
1964#endif
1965 tty->driver_data = info;
1966 info->tty = tty;
1967
1968 /*
1969 * Start up serial port
1970 */
1971 retval = startup(info);
1972 if (retval)
1973 return retval;
1974
1975 retval = block_til_ready(tty, filp, info);
1976 if (retval) {
1977#ifdef SERIAL_DEBUG_OPEN
1978 printk("rs_open returning after block_til_ready with %d\n",
1979 retval);
1980#endif
1981 return retval;
1982 }
1983
1984#ifdef SERIAL_DEBUG_OPEN
1985 printk("rs_open %s successful...", tty->name);
1986#endif
1987 return 0;
1988}
1989
1990/*
1991 * /proc fs routines....
1992 */
1993
1994static inline int line_info(char *buf, struct serial_state *state)
1995{
1996#ifdef notdef
1997 struct async_struct *info = state->info, scr_info;
1998 char stat_buf[30], control, status;
1999#endif
2000 int ret;
2001
2002 ret = sprintf(buf, "%d: uart:%s port:%X irq:%d",
2003 state->line,
2004 (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC",
2005 (unsigned int)(state->port), state->irq);
2006
2007 if (!state->port || (state->type == PORT_UNKNOWN)) {
2008 ret += sprintf(buf+ret, "\n");
2009 return ret;
2010 }
2011
2012#ifdef notdef
2013 /*
2014 * Figure out the current RS-232 lines
2015 */
2016 if (!info) {
2017 info = &scr_info; /* This is just for serial_{in,out} */
2018
2019 info->magic = SERIAL_MAGIC;
2020 info->port = state->port;
2021 info->flags = state->flags;
2022 info->quot = 0;
2023 info->tty = 0;
2024 }
2025 local_irq_disable();
2026 status = serial_in(info, UART_MSR);
2027 control = info ? info->MCR : serial_in(info, UART_MCR);
2028 local_irq_enable();
2029
2030 stat_buf[0] = 0;
2031 stat_buf[1] = 0;
2032 if (control & UART_MCR_RTS)
2033 strcat(stat_buf, "|RTS");
2034 if (status & UART_MSR_CTS)
2035 strcat(stat_buf, "|CTS");
2036 if (control & UART_MCR_DTR)
2037 strcat(stat_buf, "|DTR");
2038 if (status & UART_MSR_DSR)
2039 strcat(stat_buf, "|DSR");
2040 if (status & UART_MSR_DCD)
2041 strcat(stat_buf, "|CD");
2042 if (status & UART_MSR_RI)
2043 strcat(stat_buf, "|RI");
2044
2045 if (info->quot) {
2046 ret += sprintf(buf+ret, " baud:%d",
2047 state->baud_base / info->quot);
2048 }
2049
2050 ret += sprintf(buf+ret, " tx:%d rx:%d",
2051 state->icount.tx, state->icount.rx);
2052
2053 if (state->icount.frame)
2054 ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
2055
2056 if (state->icount.parity)
2057 ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
2058
2059 if (state->icount.brk)
2060 ret += sprintf(buf+ret, " brk:%d", state->icount.brk);
2061
2062 if (state->icount.overrun)
2063 ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
2064
2065 /*
2066 * Last thing is the RS-232 status lines
2067 */
2068 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
2069#endif
2070 return ret;
2071}
2072
2073int rs_360_read_proc(char *page, char **start, off_t off, int count,
2074 int *eof, void *data)
2075{
2076 int i, len = 0;
2077 off_t begin = 0;
2078
2079 len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
2080 for (i = 0; i < NR_PORTS && len < 4000; i++) {
2081 len += line_info(page + len, &rs_table[i]);
2082 if (len+begin > off+count)
2083 goto done;
2084 if (len+begin < off) {
2085 begin += len;
2086 len = 0;
2087 }
2088 }
2089 *eof = 1;
2090done:
2091 if (off >= len+begin)
2092 return 0;
2093 *start = page + (begin-off);
2094 return ((count < begin+len-off) ? count : begin+len-off);
2095}
2096
2097/*
2098 * ---------------------------------------------------------------------
2099 * rs_init() and friends
2100 *
2101 * rs_init() is called at boot-time to initialize the serial driver.
2102 * ---------------------------------------------------------------------
2103 */
2104
2105/*
2106 * This routine prints out the appropriate serial driver version
2107 * number, and identifies which options were configured into this
2108 * driver.
2109 */
2110static _INLINE_ void show_serial_version(void)
2111{
2112 printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
2113}
2114
2115
2116/*
2117 * The serial console driver used during boot. Note that these names
2118 * clash with those found in "serial.c", so we currently can't support
2119 * the 16xxx uarts and these at the same time. I will fix this to become
2120 * an indirect function call from tty_io.c (or something).
2121 */
2122
2123#ifdef CONFIG_SERIAL_CONSOLE
2124
2125/*
2126 * Print a string to the serial port trying not to disturb any possible
2127 * real use of the port...
2128 */
2129static void my_console_write(int idx, const char *s,
2130 unsigned count)
2131{
2132 struct serial_state *ser;
2133 ser_info_t *info;
2134 unsigned i;
2135 QUICC_BD *bdp, *bdbase;
2136 volatile struct smc_uart_pram *up;
2137 volatile u_char *cp;
2138
2139 ser = rs_table + idx;
2140
2141
2142 /* If the port has been initialized for general use, we have
2143 * to use the buffer descriptors allocated there. Otherwise,
2144 * we simply use the single buffer allocated.
2145 */
2146 if ((info = (ser_info_t *)ser->info) != NULL) {
2147 bdp = info->tx_cur;
2148 bdbase = info->tx_bd_base;
2149 }
2150 else {
2151 /* Pointer to UART in parameter ram.
2152 */
2153 /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
2154 up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
2155
2156 /* Get the address of the host memory buffer.
2157 */
2158 bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
2159 }
2160
2161 /*
2162 * We need to gracefully shut down the transmitter, disable
2163 * interrupts, then send our bytes out.
2164 */
2165
2166 /*
2167 * Now, do each character. This is not as bad as it looks
2168 * since this is a holding FIFO and not a transmitting FIFO.
2169 * We could add the complexity of filling the entire transmit
2170 * buffer, but we would just wait longer between accesses......
2171 */
2172 for (i = 0; i < count; i++, s++) {
2173 /* Wait for transmitter fifo to empty.
2174 * Ready indicates output is ready, and xmt is doing
2175 * that, not that it is ready for us to send.
2176 */
2177 while (bdp->status & BD_SC_READY);
2178
2179 /* Send the character out.
2180 */
2181 cp = bdp->buf;
2182 *cp = *s;
2183
2184 bdp->length = 1;
2185 bdp->status |= BD_SC_READY;
2186
2187 if (bdp->status & BD_SC_WRAP)
2188 bdp = bdbase;
2189 else
2190 bdp++;
2191
2192 /* if a LF, also do CR... */
2193 if (*s == 10) {
2194 while (bdp->status & BD_SC_READY);
2195 /* cp = __va(bdp->buf); */
2196 cp = bdp->buf;
2197 *cp = 13;
2198 bdp->length = 1;
2199 bdp->status |= BD_SC_READY;
2200
2201 if (bdp->status & BD_SC_WRAP) {
2202 bdp = bdbase;
2203 }
2204 else {
2205 bdp++;
2206 }
2207 }
2208 }
2209
2210 /*
2211 * Finally, Wait for transmitter & holding register to empty
2212 * and restore the IER
2213 */
2214 while (bdp->status & BD_SC_READY);
2215
2216 if (info)
2217 info->tx_cur = (QUICC_BD *)bdp;
2218}
2219
2220static void serial_console_write(struct console *c, const char *s,
2221 unsigned count)
2222{
2223#ifdef CONFIG_KGDB
2224 /* Try to let stub handle output. Returns true if it did. */
2225 if (kgdb_output_string(s, count))
2226 return;
2227#endif
2228 my_console_write(c->index, s, count);
2229}
2230
2231
2232
2233/*void console_print_68360(const char *p)
2234{
2235 const char *cp = p;
2236 int i;
2237
2238 for (i=0;cp[i]!=0;i++);
2239
2240 serial_console_write (p, i);
2241
2242 //Comment this if you want to have a strict interrupt-driven output
2243 //rs_fair_output();
2244
2245 return;
2246}*/
2247
2248
2249
2250
2251
2252
2253#ifdef CONFIG_XMON
2254int
2255xmon_360_write(const char *s, unsigned count)
2256{
2257 my_console_write(0, s, count);
2258 return(count);
2259}
2260#endif
2261
2262#ifdef CONFIG_KGDB
2263void
2264putDebugChar(char ch)
2265{
2266 my_console_write(0, &ch, 1);
2267}
2268#endif
2269
2270/*
2271 * Receive character from the serial port. This only works well
2272 * before the port is initialized for real use.
2273 */
2274static int my_console_wait_key(int idx, int xmon, char *obuf)
2275{
2276 struct serial_state *ser;
2277 u_char c, *cp;
2278 ser_info_t *info;
2279 QUICC_BD *bdp;
2280 volatile struct smc_uart_pram *up;
2281 int i;
2282
2283 ser = rs_table + idx;
2284
2285 /* Get the address of the host memory buffer.
2286 * If the port has been initialized for general use, we must
2287 * use information from the port structure.
2288 */
2289 if ((info = (ser_info_t *)ser->info))
2290 bdp = info->rx_cur;
2291 else
2292 /* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */
2293 bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
2294
2295 /* Pointer to UART in parameter ram.
2296 */
2297 /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
2298 up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
2299
2300 /*
2301 * We need to gracefully shut down the receiver, disable
2302 * interrupts, then read the input.
2303 * XMON just wants a poll. If no character, return -1, else
2304 * return the character.
2305 */
2306 if (!xmon) {
2307 while (bdp->status & BD_SC_EMPTY);
2308 }
2309 else {
2310 if (bdp->status & BD_SC_EMPTY)
2311 return -1;
2312 }
2313
2314 cp = (char *)bdp->buf;
2315
2316 if (obuf) {
2317 i = c = bdp->length;
2318 while (i-- > 0)
2319 *obuf++ = *cp++;
2320 }
2321 else {
2322 c = *cp;
2323 }
2324 bdp->status |= BD_SC_EMPTY;
2325
2326 if (info) {
2327 if (bdp->status & BD_SC_WRAP) {
2328 bdp = info->rx_bd_base;
2329 }
2330 else {
2331 bdp++;
2332 }
2333 info->rx_cur = (QUICC_BD *)bdp;
2334 }
2335
2336 return((int)c);
2337}
2338
2339static int serial_console_wait_key(struct console *co)
2340{
2341 return(my_console_wait_key(co->index, 0, NULL));
2342}
2343
2344#ifdef CONFIG_XMON
2345int
2346xmon_360_read_poll(void)
2347{
2348 return(my_console_wait_key(0, 1, NULL));
2349}
2350
2351int
2352xmon_360_read_char(void)
2353{
2354 return(my_console_wait_key(0, 0, NULL));
2355}
2356#endif
2357
2358#ifdef CONFIG_KGDB
2359static char kgdb_buf[RX_BUF_SIZE], *kgdp;
2360static int kgdb_chars;
2361
2362unsigned char
2363getDebugChar(void)
2364{
2365 if (kgdb_chars <= 0) {
2366 kgdb_chars = my_console_wait_key(0, 0, kgdb_buf);
2367 kgdp = kgdb_buf;
2368 }
2369 kgdb_chars--;
2370
2371 return(*kgdp++);
2372}
2373
2374void kgdb_interruptible(int state)
2375{
2376}
2377void kgdb_map_scc(void)
2378{
2379 struct serial_state *ser;
2380 uint mem_addr;
2381 volatile QUICC_BD *bdp;
2382 volatile smc_uart_t *up;
2383
2384 cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
2385
2386 /* To avoid data cache CPM DMA coherency problems, allocate a
2387 * buffer in the CPM DPRAM. This will work until the CPM and
2388 * serial ports are initialized. At that time a memory buffer
2389 * will be allocated.
2390 * The port is already initialized from the boot procedure, all
2391 * we do here is give it a different buffer and make it a FIFO.
2392 */
2393
2394 ser = rs_table;
2395
2396 /* Right now, assume we are using SMCs.
2397 */
2398 up = (smc_uart_t *)&cpmp->cp_dparam[ser->port];
2399
2400 /* Allocate space for an input FIFO, plus a few bytes for output.
2401 * Allocate bytes to maintain word alignment.
2402 */
2403 mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]);
2404
2405 /* Set the physical address of the host memory buffers in
2406 * the buffer descriptors.
2407 */
2408 bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase];
2409 bdp->buf = mem_addr;
2410
2411 bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase];
2412 bdp->buf = mem_addr+RX_BUF_SIZE;
2413
2414 up->smc_mrblr = RX_BUF_SIZE; /* receive buffer length */
2415 up->smc_maxidl = RX_BUF_SIZE;
2416}
2417#endif
2418
2419static struct tty_struct *serial_console_device(struct console *c, int *index)
2420{
2421 *index = c->index;
2422 return serial_driver;
2423}
2424
2425
2426struct console sercons = {
2427 .name = "ttyS",
2428 .write = serial_console_write,
2429 .device = serial_console_device,
2430 .wait_key = serial_console_wait_key,
2431 .setup = serial_console_setup,
2432 .flags = CON_PRINTBUFFER,
2433 .index = CONFIG_SERIAL_CONSOLE_PORT,
2434};
2435
2436
2437
2438/*
2439 * Register console.
2440 */
2441long console_360_init(long kmem_start, long kmem_end)
2442{
2443 register_console(&sercons);
2444 /*register_console (console_print_68360); - 2.0.38 only required a write
2445 function pointer. */
2446 return kmem_start;
2447}
2448
2449#endif
2450
2451/* Index in baud rate table of the default console baud rate.
2452*/
2453static int baud_idx;
2454
2455static struct tty_operations rs_360_ops = {
2456 .owner = THIS_MODULE,
2457 .open = rs_360_open,
2458 .close = rs_360_close,
2459 .write = rs_360_write,
2460 .put_char = rs_360_put_char,
2461 .write_room = rs_360_write_room,
2462 .chars_in_buffer = rs_360_chars_in_buffer,
2463 .flush_buffer = rs_360_flush_buffer,
2464 .ioctl = rs_360_ioctl,
2465 .throttle = rs_360_throttle,
2466 .unthrottle = rs_360_unthrottle,
2467 /* .send_xchar = rs_360_send_xchar, */
2468 .set_termios = rs_360_set_termios,
2469 .stop = rs_360_stop,
2470 .start = rs_360_start,
2471 .hangup = rs_360_hangup,
2472 /* .wait_until_sent = rs_360_wait_until_sent, */
2473 /* .read_proc = rs_360_read_proc, */
2474 .tiocmget = rs_360_tiocmget,
2475 .tiocmset = rs_360_tiocmset,
2476};
2477
2478/* int __init rs_360_init(void) */
2479int rs_360_init(void)
2480{
2481 struct serial_state * state;
2482 ser_info_t *info;
2483 void *mem_addr;
2484 uint dp_addr, iobits;
2485 int i, j, idx;
2486 ushort chan;
2487 QUICC_BD *bdp;
2488 volatile QUICC *cp;
2489 volatile struct smc_regs *sp;
2490 volatile struct smc_uart_pram *up;
2491 volatile struct scc_regs *scp;
2492 volatile struct uart_pram *sup;
2493 /* volatile immap_t *immap; */
2494
2495 serial_driver = alloc_tty_driver(NR_PORTS);
2496 if (!serial_driver)
2497 return -1;
2498
2499 show_serial_version();
2500
2501 serial_driver->name = "ttyS";
2502 serial_driver->major = TTY_MAJOR;
2503 serial_driver->minor_start = 64;
2504 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
2505 serial_driver->subtype = SERIAL_TYPE_NORMAL;
2506 serial_driver->init_termios = tty_std_termios;
2507 serial_driver->init_termios.c_cflag =
2508 baud_idx | CS8 | CREAD | HUPCL | CLOCAL;
2509 serial_driver->flags = TTY_DRIVER_REAL_RAW;
2510 tty_set_operations(serial_driver, &rs_360_ops);
2511
2512 if (tty_register_driver(serial_driver))
2513 panic("Couldn't register serial driver\n");
2514
2515 cp = pquicc; /* Get pointer to Communication Processor */
2516 /* immap = (immap_t *)IMAP_ADDR; */ /* and to internal registers */
2517
2518
2519 /* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O.
2520 */
2521 /* The "standard" configuration through the 860.
2522 */
2523/* immap->im_ioport.iop_papar |= 0x00fc; */
2524/* immap->im_ioport.iop_padir &= ~0x00fc; */
2525/* immap->im_ioport.iop_paodr &= ~0x00fc; */
2526 cp->pio_papar |= 0x00fc;
2527 cp->pio_padir &= ~0x00fc;
2528 /* cp->pio_paodr &= ~0x00fc; */
2529
2530
2531 /* Since we don't yet do modem control, connect the port C pins
2532 * as general purpose I/O. This will assert CTS and CD for the
2533 * SCC ports.
2534 */
2535 /* FIXME: see 360um p.7-365 and 860um p.34-12
2536 * I can't make sense of these bits - mleslie*/
2537/* immap->im_ioport.iop_pcdir |= 0x03c6; */
2538/* immap->im_ioport.iop_pcpar &= ~0x03c6; */
2539
2540/* cp->pio_pcdir |= 0x03c6; */
2541/* cp->pio_pcpar &= ~0x03c6; */
2542
2543
2544
2545 /* Connect SCC2 and SCC3 to NMSI. Connect BRG3 to SCC2 and
2546 * BRG4 to SCC3.
2547 */
2548 cp->si_sicr &= ~0x00ffff00;
2549 cp->si_sicr |= 0x001b1200;
2550
2551#ifdef CONFIG_PP04
2552 /* Frequentis PP04 forced to RS-232 until we know better.
2553 * Port C 12 and 13 low enables RS-232 on SCC3 and SCC4.
2554 */
2555 immap->im_ioport.iop_pcdir |= 0x000c;
2556 immap->im_ioport.iop_pcpar &= ~0x000c;
2557 immap->im_ioport.iop_pcdat &= ~0x000c;
2558
2559 /* This enables the TX driver.
2560 */
2561 cp->cp_pbpar &= ~0x6000;
2562 cp->cp_pbdat &= ~0x6000;
2563#endif
2564
2565 for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
2566 state->magic = SSTATE_MAGIC;
2567 state->line = i;
2568 state->type = PORT_UNKNOWN;
2569 state->custom_divisor = 0;
2570 state->close_delay = 5*HZ/10;
2571 state->closing_wait = 30*HZ;
2572 state->icount.cts = state->icount.dsr =
2573 state->icount.rng = state->icount.dcd = 0;
2574 state->icount.rx = state->icount.tx = 0;
2575 state->icount.frame = state->icount.parity = 0;
2576 state->icount.overrun = state->icount.brk = 0;
2577 printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n",
2578 i, (unsigned int)(state->irq),
2579 (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC");
2580
2581#ifdef CONFIG_SERIAL_CONSOLE
2582 /* If we just printed the message on the console port, and
2583 * we are about to initialize it for general use, we have
2584 * to wait a couple of character times for the CR/NL to
2585 * make it out of the transmit buffer.
2586 */
2587 if (i == CONFIG_SERIAL_CONSOLE_PORT)
2588 mdelay(8);
2589
2590
2591/* idx = PORT_NUM(info->state->smc_scc_num); */
2592/* if (info->state->smc_scc_num & NUM_IS_SCC) */
2593/* chan = scc_chan_map[idx]; */
2594/* else */
2595/* chan = smc_chan_map[idx]; */
2596
2597/* cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */
2598/* while (cp->cp_cr & CPM_CR_FLG); */
2599
2600#endif
2601 /* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */
2602 info = &quicc_ser_info[i];
2603 if (info) {
2604 memset (info, 0, sizeof(ser_info_t));
2605 info->magic = SERIAL_MAGIC;
2606 info->line = i;
2607 info->flags = state->flags;
2608 INIT_WORK(&info->tqueue, do_softint, info);
2609 INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
2610 init_waitqueue_head(&info->open_wait);
2611 init_waitqueue_head(&info->close_wait);
2612 info->state = state;
2613 state->info = (struct async_struct *)info;
2614
2615 /* We need to allocate a transmit and receive buffer
2616 * descriptors from dual port ram, and a character
2617 * buffer area from host mem.
2618 */
2619 dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO);
2620
2621 /* Allocate space for FIFOs in the host memory.
2622 * (for now this is from a static array of buffers :(
2623 */
2624 /* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */
2625 /* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */
2626 mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE];
2627
2628 /* Set the physical address of the host memory
2629 * buffers in the buffer descriptors, and the
2630 * virtual address for us to work with.
2631 */
2632 bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
2633 info->rx_cur = info->rx_bd_base = bdp;
2634
2635 /* initialize rx buffer descriptors */
2636 for (j=0; j<(RX_NUM_FIFO-1); j++) {
2637 bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
2638 bdp->status = BD_SC_EMPTY | BD_SC_INTRPT;
2639 mem_addr += RX_BUF_SIZE;
2640 bdp++;
2641 }
2642 bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
2643 bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
2644
2645
2646 idx = PORT_NUM(info->state->smc_scc_num);
2647 if (info->state->smc_scc_num & NUM_IS_SCC) {
2648
2649#if defined (CONFIG_UCQUICC) && 1
2650 /* set the transceiver mode to RS232 */
2651 sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */
2652 sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02);
2653 *(uint *)_periph_base = sipex_mode_bits;
2654 /* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */
2655#endif
2656 }
2657
2658 dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO);
2659
2660 /* Allocate space for FIFOs in the host memory.
2661 */
2662 /* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */
2663 /* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */
2664 mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE];
2665
2666 /* Set the physical address of the host memory
2667 * buffers in the buffer descriptors, and the
2668 * virtual address for us to work with.
2669 */
2670 /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
2671 bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
2672 info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp;
2673
2674 /* initialize tx buffer descriptors */
2675 for (j=0; j<(TX_NUM_FIFO-1); j++) {
2676 bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
2677 bdp->status = BD_SC_INTRPT;
2678 mem_addr += TX_BUF_SIZE;
2679 bdp++;
2680 }
2681 bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
2682 bdp->status = (BD_SC_WRAP | BD_SC_INTRPT);
2683
2684 if (info->state->smc_scc_num & NUM_IS_SCC) {
2685 scp = &pquicc->scc_regs[idx];
2686 sup = &pquicc->pram[info->state->port].scc.pscc.u;
2687 sup->rbase = dp_addr;
2688 sup->tbase = dp_addr;
2689
2690 /* Set up the uart parameters in the
2691 * parameter ram.
2692 */
2693 sup->rfcr = SMC_EB;
2694 sup->tfcr = SMC_EB;
2695
2696 /* Set this to 1 for now, so we get single
2697 * character interrupts. Using idle charater
2698 * time requires some additional tuning.
2699 */
2700 sup->mrblr = 1;
2701 sup->max_idl = 0;
2702 sup->brkcr = 1;
2703 sup->parec = 0;
2704 sup->frmer = 0;
2705 sup->nosec = 0;
2706 sup->brkec = 0;
2707 sup->uaddr1 = 0;
2708 sup->uaddr2 = 0;
2709 sup->toseq = 0;
2710 {
2711 int i;
2712 for (i=0;i<8;i++)
2713 sup->cc[i] = 0x8000;
2714 }
2715 sup->rccm = 0xc0ff;
2716
2717 /* Send the CPM an initialize command.
2718 */
2719 chan = scc_chan_map[idx];
2720
2721 /* execute the INIT RX & TX PARAMS command for this channel. */
2722 cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
2723 while (cp->cp_cr & CPM_CR_FLG);
2724
2725 /* Set UART mode, 8 bit, no parity, one stop.
2726 * Enable receive and transmit.
2727 */
2728 scp->scc_gsmr.w.high = 0;
2729 scp->scc_gsmr.w.low =
2730 (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
2731
2732 /* Disable all interrupts and clear all pending
2733 * events.
2734 */
2735 scp->scc_sccm = 0;
2736 scp->scc_scce = 0xffff;
2737 scp->scc_dsr = 0x7e7e;
2738 scp->scc_psmr = 0x3000;
2739
2740 /* If the port is the console, enable Rx and Tx.
2741 */
2742#ifdef CONFIG_SERIAL_CONSOLE
2743 if (i == CONFIG_SERIAL_CONSOLE_PORT)
2744 scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
2745#endif
2746 }
2747 else {
2748 /* Configure SMCs Tx/Rx instead of port B
2749 * parallel I/O.
2750 */
2751 up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
2752 up->rbase = dp_addr;
2753
2754 iobits = 0xc0 << (idx * 4);
2755 cp->pip_pbpar |= iobits;
2756 cp->pip_pbdir &= ~iobits;
2757 cp->pip_pbodr &= ~iobits;
2758
2759
2760 /* Connect the baud rate generator to the
2761 * SMC based upon index in rs_table. Also
2762 * make sure it is connected to NMSI.
2763 */
2764 cp->si_simode &= ~(0xffff << (idx * 16));
2765 cp->si_simode |= (i << ((idx * 16) + 12));
2766
2767 up->tbase = dp_addr;
2768
2769 /* Set up the uart parameters in the
2770 * parameter ram.
2771 */
2772 up->rfcr = SMC_EB;
2773 up->tfcr = SMC_EB;
2774
2775 /* Set this to 1 for now, so we get single
2776 * character interrupts. Using idle charater
2777 * time requires some additional tuning.
2778 */
2779 up->mrblr = 1;
2780 up->max_idl = 0;
2781 up->brkcr = 1;
2782
2783 /* Send the CPM an initialize command.
2784 */
2785 chan = smc_chan_map[idx];
2786
2787 cp->cp_cr = mk_cr_cmd(chan,
2788 CPM_CR_INIT_TRX) | CPM_CR_FLG;
2789#ifdef CONFIG_SERIAL_CONSOLE
2790 if (i == CONFIG_SERIAL_CONSOLE_PORT)
2791 printk("");
2792#endif
2793 while (cp->cp_cr & CPM_CR_FLG);
2794
2795 /* Set UART mode, 8 bit, no parity, one stop.
2796 * Enable receive and transmit.
2797 */
2798 sp = &cp->smc_regs[idx];
2799 sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
2800
2801 /* Disable all interrupts and clear all pending
2802 * events.
2803 */
2804 sp->smc_smcm = 0;
2805 sp->smc_smce = 0xff;
2806
2807 /* If the port is the console, enable Rx and Tx.
2808 */
2809#ifdef CONFIG_SERIAL_CONSOLE
2810 if (i == CONFIG_SERIAL_CONSOLE_PORT)
2811 sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
2812#endif
2813 }
2814
2815 /* Install interrupt handler.
2816 */
2817 /* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info); */
2818 /*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */
2819 request_irq(state->irq, rs_360_interrupt,
2820 IRQ_FLG_LOCK, "ttyS", (void *)info);
2821
2822 /* Set up the baud rate generator.
2823 */
2824 m360_cpm_setbrg(i, baud_table[baud_idx]);
2825
2826 }
2827 }
2828
2829 return 0;
2830}
2831
2832
2833
2834
2835
2836/* This must always be called before the rs_360_init() function, otherwise
2837 * it blows away the port control information.
2838 */
2839//static int __init serial_console_setup( struct console *co, char *options)
2840int serial_console_setup( struct console *co, char *options)
2841{
2842 struct serial_state *ser;
2843 uint mem_addr, dp_addr, bidx, idx, iobits;
2844 ushort chan;
2845 QUICC_BD *bdp;
2846 volatile QUICC *cp;
2847 volatile struct smc_regs *sp;
2848 volatile struct scc_regs *scp;
2849 volatile struct smc_uart_pram *up;
2850 volatile struct uart_pram *sup;
2851
2852/* mleslie TODO:
2853 * add something to the 68k bootloader to store a desired initial console baud rate */
2854
2855/* bd_t *bd; */ /* a board info struct used by EPPC-bug */
2856/* bd = (bd_t *)__res; */
2857
2858 for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++)
2859 /* if (bd->bi_baudrate == baud_table[bidx]) */
2860 if (CONSOLE_BAUDRATE == baud_table[bidx])
2861 break;
2862
2863 /* co->cflag = CREAD|CLOCAL|bidx|CS8; */
2864 baud_idx = bidx;
2865
2866 ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT;
2867
2868 cp = pquicc; /* Get pointer to Communication Processor */
2869
2870 idx = PORT_NUM(ser->smc_scc_num);
2871 if (ser->smc_scc_num & NUM_IS_SCC) {
2872
2873 /* TODO: need to set up SCC pin assignment etc. here */
2874
2875 }
2876 else {
2877 iobits = 0xc0 << (idx * 4);
2878 cp->pip_pbpar |= iobits;
2879 cp->pip_pbdir &= ~iobits;
2880 cp->pip_pbodr &= ~iobits;
2881
2882 /* Connect the baud rate generator to the
2883 * SMC based upon index in rs_table. Also
2884 * make sure it is connected to NMSI.
2885 */
2886 cp->si_simode &= ~(0xffff << (idx * 16));
2887 cp->si_simode |= (idx << ((idx * 16) + 12));
2888 }
2889
2890 /* When we get here, the CPM has been reset, so we need
2891 * to configure the port.
2892 * We need to allocate a transmit and receive buffer descriptor
2893 * from dual port ram, and a character buffer area from host mem.
2894 */
2895
2896 /* Allocate space for two buffer descriptors in the DP ram.
2897 */
2898 dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO);
2899
2900 /* Allocate space for two 2 byte FIFOs in the host memory.
2901 */
2902 /* mem_addr = m360_cpm_hostalloc(8); */
2903 mem_addr = (uint)console_fifos;
2904
2905
2906 /* Set the physical address of the host memory buffers in
2907 * the buffer descriptors.
2908 */
2909 /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
2910 bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
2911 bdp->buf = (char *)mem_addr;
2912 (bdp+1)->buf = (char *)(mem_addr+4);
2913
2914 /* For the receive, set empty and wrap.
2915 * For transmit, set wrap.
2916 */
2917 bdp->status = BD_SC_EMPTY | BD_SC_WRAP;
2918 (bdp+1)->status = BD_SC_WRAP;
2919
2920 /* Set up the uart parameters in the parameter ram.
2921 */
2922 if (ser->smc_scc_num & NUM_IS_SCC) {
2923 scp = &cp->scc_regs[idx];
2924 /* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */
2925 sup = &pquicc->pram[ser->port].scc.pscc.u;
2926
2927 sup->rbase = dp_addr;
2928 sup->tbase = dp_addr + sizeof(QUICC_BD);
2929
2930 /* Set up the uart parameters in the
2931 * parameter ram.
2932 */
2933 sup->rfcr = SMC_EB;
2934 sup->tfcr = SMC_EB;
2935
2936 /* Set this to 1 for now, so we get single
2937 * character interrupts. Using idle charater
2938 * time requires some additional tuning.
2939 */
2940 sup->mrblr = 1;
2941 sup->max_idl = 0;
2942 sup->brkcr = 1;
2943 sup->parec = 0;
2944 sup->frmer = 0;
2945 sup->nosec = 0;
2946 sup->brkec = 0;
2947 sup->uaddr1 = 0;
2948 sup->uaddr2 = 0;
2949 sup->toseq = 0;
2950 {
2951 int i;
2952 for (i=0;i<8;i++)
2953 sup->cc[i] = 0x8000;
2954 }
2955 sup->rccm = 0xc0ff;
2956
2957 /* Send the CPM an initialize command.
2958 */
2959 chan = scc_chan_map[idx];
2960
2961 cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
2962 while (cp->cp_cr & CPM_CR_FLG);
2963
2964 /* Set UART mode, 8 bit, no parity, one stop.
2965 * Enable receive and transmit.
2966 */
2967 scp->scc_gsmr.w.high = 0;
2968 scp->scc_gsmr.w.low =
2969 (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
2970
2971 /* Disable all interrupts and clear all pending
2972 * events.
2973 */
2974 scp->scc_sccm = 0;
2975 scp->scc_scce = 0xffff;
2976 scp->scc_dsr = 0x7e7e;
2977 scp->scc_psmr = 0x3000;
2978
2979 scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
2980
2981 }
2982 else {
2983 /* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */
2984 up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
2985
2986 up->rbase = dp_addr; /* Base of receive buffer desc. */
2987 up->tbase = dp_addr+sizeof(QUICC_BD); /* Base of xmt buffer desc. */
2988 up->rfcr = SMC_EB;
2989 up->tfcr = SMC_EB;
2990
2991 /* Set this to 1 for now, so we get single character interrupts.
2992 */
2993 up->mrblr = 1; /* receive buffer length */
2994 up->max_idl = 0; /* wait forever for next char */
2995
2996 /* Send the CPM an initialize command.
2997 */
2998 chan = smc_chan_map[idx];
2999 cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
3000 while (cp->cp_cr & CPM_CR_FLG);
3001
3002 /* Set UART mode, 8 bit, no parity, one stop.
3003 * Enable receive and transmit.
3004 */
3005 sp = &cp->smc_regs[idx];
3006 sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
3007
3008 /* And finally, enable Rx and Tx.
3009 */
3010 sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
3011 }
3012
3013 /* Set up the baud rate generator.
3014 */
3015 /* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */
3016 m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE);
3017
3018 return 0;
3019}
3020
3021/*
3022 * Local variables:
3023 * c-indent-level: 4
3024 * c-basic-offset: 4
3025 * tab-width: 4
3026 * End:
3027 */