aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/ufs
diff options
context:
space:
mode:
authorSantosh Yaraganavi <santoshsy@gmail.com>2012-02-29 01:41:50 -0500
committerJames Bottomley <JBottomley@Parallels.com>2012-03-27 03:26:28 -0400
commit7a3e97b0dc4bbac2ba7803564ab0057722689921 (patch)
treeace32dfcc94a0994b123cc1e3b3967eccd9a0ef3 /drivers/scsi/ufs
parent0bd7f84211ad244607e28e9e8fbad0244d54e6f5 (diff)
[SCSI] ufshcd: UFS Host controller driver
This patch adds support for Universal Flash Storage(UFS) host controllers. The UFS host controller driver includes host controller initialization method. The Initialization process involves following steps: - Initiate UFS Host Controller initialization process by writing to Host controller enable register - Configure UFS Host controller registers with host memory space datastructure offsets. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests - Enable required interrupts - Configure interrupt aggregation [jejb: fix warnings in 32 bit compile] Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Reviewed-by: Arnd Bergmann <arnd@linaro.org> Reviewed-by: Vishak G <vishak.g@samsung.com> Reviewed-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/ufs')
-rw-r--r--drivers/scsi/ufs/Kconfig49
-rw-r--r--drivers/scsi/ufs/Makefile2
-rw-r--r--drivers/scsi/ufs/ufs.h207
-rw-r--r--drivers/scsi/ufs/ufshcd.c1978
-rw-r--r--drivers/scsi/ufs/ufshci.h376
5 files changed, 2612 insertions, 0 deletions
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
new file mode 100644
index 000000000000..8f27f9d6f91d
--- /dev/null
+++ b/drivers/scsi/ufs/Kconfig
@@ -0,0 +1,49 @@
1#
2# Kernel configuration file for the UFS Host Controller
3#
4# This code is based on drivers/scsi/ufs/Kconfig
5# Copyright (C) 2011 Samsung Samsung India Software Operations
6#
7# Santosh Yaraganavi <santosh.sy@samsung.com>
8# Vinayak Holikatti <h.vinayak@samsung.com>
9
10# This program is free software; you can redistribute it and/or
11# modify it under the terms of the GNU General Public License
12# as published by the Free Software Foundation; either version 2
13# of the License, or (at your option) any later version.
14
15# This program is distributed in the hope that it will be useful,
16# but WITHOUT ANY WARRANTY; without even the implied warranty of
17# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18# GNU General Public License for more details.
19
20# NO WARRANTY
21# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25# solely responsible for determining the appropriateness of using and
26# distributing the Program and assumes all risks associated with its
27# exercise of rights under this Agreement, including but not limited to
28# the risks and costs of program errors, damage to or loss of data,
29# programs or equipment, and unavailability or interruption of operations.
30
31# DISCLAIMER OF LIABILITY
32# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39
40# You should have received a copy of the GNU General Public License
41# along with this program; if not, write to the Free Software
42# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
43# USA.
44
45config SCSI_UFSHCD
46 tristate "Universal Flash Storage host controller driver"
47 depends on PCI && SCSI
48 ---help---
49 This is a generic driver which supports PCIe UFS Host controllers.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
new file mode 100644
index 000000000000..adf7895a6a91
--- /dev/null
+++ b/drivers/scsi/ufs/Makefile
@@ -0,0 +1,2 @@
1# UFSHCD makefile
2obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
new file mode 100644
index 000000000000..b207529f8d54
--- /dev/null
+++ b/drivers/scsi/ufs/ufs.h
@@ -0,0 +1,207 @@
1/*
2 * Universal Flash Storage Host controller driver
3 *
4 * This code is based on drivers/scsi/ufs/ufs.h
5 * Copyright (C) 2011-2012 Samsung India Software Operations
6 *
7 * Santosh Yaraganavi <santosh.sy@samsung.com>
8 * Vinayak Holikatti <h.vinayak@samsung.com>
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version 2
13 * of the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * NO WARRANTY
21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25 * solely responsible for determining the appropriateness of using and
26 * distributing the Program and assumes all risks associated with its
27 * exercise of rights under this Agreement, including but not limited to
28 * the risks and costs of program errors, damage to or loss of data,
29 * programs or equipment, and unavailability or interruption of operations.
30
31 * DISCLAIMER OF LIABILITY
32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39
40 * You should have received a copy of the GNU General Public License
41 * along with this program; if not, write to the Free Software
42 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
43 * USA.
44 */
45
46#ifndef _UFS_H
47#define _UFS_H
48
49#define MAX_CDB_SIZE 16
50
51#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
52 ((byte3 << 24) | (byte2 << 16) |\
53 (byte1 << 8) | (byte0))
54
55/*
56 * UFS Protocol Information Unit related definitions
57 */
58
59/* Task management functions */
60enum {
61 UFS_ABORT_TASK = 0x01,
62 UFS_ABORT_TASK_SET = 0x02,
63 UFS_CLEAR_TASK_SET = 0x04,
64 UFS_LOGICAL_RESET = 0x08,
65 UFS_QUERY_TASK = 0x80,
66 UFS_QUERY_TASK_SET = 0x81,
67};
68
69/* UTP UPIU Transaction Codes Initiator to Target */
70enum {
71 UPIU_TRANSACTION_NOP_OUT = 0x00,
72 UPIU_TRANSACTION_COMMAND = 0x01,
73 UPIU_TRANSACTION_DATA_OUT = 0x02,
74 UPIU_TRANSACTION_TASK_REQ = 0x04,
75 UPIU_TRANSACTION_QUERY_REQ = 0x26,
76};
77
78/* UTP UPIU Transaction Codes Target to Initiator */
79enum {
80 UPIU_TRANSACTION_NOP_IN = 0x20,
81 UPIU_TRANSACTION_RESPONSE = 0x21,
82 UPIU_TRANSACTION_DATA_IN = 0x22,
83 UPIU_TRANSACTION_TASK_RSP = 0x24,
84 UPIU_TRANSACTION_READY_XFER = 0x31,
85 UPIU_TRANSACTION_QUERY_RSP = 0x36,
86};
87
88/* UPIU Read/Write flags */
89enum {
90 UPIU_CMD_FLAGS_NONE = 0x00,
91 UPIU_CMD_FLAGS_WRITE = 0x20,
92 UPIU_CMD_FLAGS_READ = 0x40,
93};
94
95/* UPIU Task Attributes */
96enum {
97 UPIU_TASK_ATTR_SIMPLE = 0x00,
98 UPIU_TASK_ATTR_ORDERED = 0x01,
99 UPIU_TASK_ATTR_HEADQ = 0x02,
100 UPIU_TASK_ATTR_ACA = 0x03,
101};
102
103/* UTP QUERY Transaction Specific Fields OpCode */
104enum {
105 UPIU_QUERY_OPCODE_NOP = 0x0,
106 UPIU_QUERY_OPCODE_READ_DESC = 0x1,
107 UPIU_QUERY_OPCODE_WRITE_DESC = 0x2,
108 UPIU_QUERY_OPCODE_READ_ATTR = 0x3,
109 UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4,
110 UPIU_QUERY_OPCODE_READ_FLAG = 0x5,
111 UPIU_QUERY_OPCODE_SET_FLAG = 0x6,
112 UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7,
113 UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8,
114};
115
116/* UTP Transfer Request Command Type (CT) */
117enum {
118 UPIU_COMMAND_SET_TYPE_SCSI = 0x0,
119 UPIU_COMMAND_SET_TYPE_UFS = 0x1,
120 UPIU_COMMAND_SET_TYPE_QUERY = 0x2,
121};
122
123enum {
124 MASK_SCSI_STATUS = 0xFF,
125 MASK_TASK_RESPONSE = 0xFF00,
126 MASK_RSP_UPIU_RESULT = 0xFFFF,
127};
128
129/* Task management service response */
130enum {
131 UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00,
132 UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04,
133 UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08,
134 UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05,
135 UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09,
136};
137/**
138 * struct utp_upiu_header - UPIU header structure
139 * @dword_0: UPIU header DW-0
140 * @dword_1: UPIU header DW-1
141 * @dword_2: UPIU header DW-2
142 */
143struct utp_upiu_header {
144 u32 dword_0;
145 u32 dword_1;
146 u32 dword_2;
147};
148
149/**
150 * struct utp_upiu_cmd - Command UPIU structure
151 * @header: UPIU header structure DW-0 to DW-2
152 * @data_transfer_len: Data Transfer Length DW-3
153 * @cdb: Command Descriptor Block CDB DW-4 to DW-7
154 */
155struct utp_upiu_cmd {
156 struct utp_upiu_header header;
157 u32 exp_data_transfer_len;
158 u8 cdb[MAX_CDB_SIZE];
159};
160
161/**
162 * struct utp_upiu_rsp - Response UPIU structure
163 * @header: UPIU header DW-0 to DW-2
164 * @residual_transfer_count: Residual transfer count DW-3
165 * @reserved: Reserved double words DW-4 to DW-7
166 * @sense_data_len: Sense data length DW-8 U16
167 * @sense_data: Sense data field DW-8 to DW-12
168 */
169struct utp_upiu_rsp {
170 struct utp_upiu_header header;
171 u32 residual_transfer_count;
172 u32 reserved[4];
173 u16 sense_data_len;
174 u8 sense_data[18];
175};
176
177/**
178 * struct utp_upiu_task_req - Task request UPIU structure
179 * @header - UPIU header structure DW0 to DW-2
180 * @input_param1: Input parameter 1 DW-3
181 * @input_param2: Input parameter 2 DW-4
182 * @input_param3: Input parameter 3 DW-5
183 * @reserved: Reserved double words DW-6 to DW-7
184 */
185struct utp_upiu_task_req {
186 struct utp_upiu_header header;
187 u32 input_param1;
188 u32 input_param2;
189 u32 input_param3;
190 u32 reserved[2];
191};
192
193/**
194 * struct utp_upiu_task_rsp - Task Management Response UPIU structure
195 * @header: UPIU header structure DW0-DW-2
196 * @output_param1: Ouput parameter 1 DW3
197 * @output_param2: Output parameter 2 DW4
198 * @reserved: Reserved double words DW-5 to DW-7
199 */
200struct utp_upiu_task_rsp {
201 struct utp_upiu_header header;
202 u32 output_param1;
203 u32 output_param2;
204 u32 reserved[3];
205};
206
207#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
new file mode 100644
index 000000000000..52b96e8bf92e
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -0,0 +1,1978 @@
1/*
2 * Universal Flash Storage Host controller driver
3 *
4 * This code is based on drivers/scsi/ufs/ufshcd.c
5 * Copyright (C) 2011-2012 Samsung India Software Operations
6 *
7 * Santosh Yaraganavi <santosh.sy@samsung.com>
8 * Vinayak Holikatti <h.vinayak@samsung.com>
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version 2
13 * of the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * NO WARRANTY
21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25 * solely responsible for determining the appropriateness of using and
26 * distributing the Program and assumes all risks associated with its
27 * exercise of rights under this Agreement, including but not limited to
28 * the risks and costs of program errors, damage to or loss of data,
29 * programs or equipment, and unavailability or interruption of operations.
30
31 * DISCLAIMER OF LIABILITY
32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39
40 * You should have received a copy of the GNU General Public License
41 * along with this program; if not, write to the Free Software
42 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
43 * USA.
44 */
45
46#include <linux/module.h>
47#include <linux/kernel.h>
48#include <linux/init.h>
49#include <linux/pci.h>
50#include <linux/interrupt.h>
51#include <linux/io.h>
52#include <linux/delay.h>
53#include <linux/slab.h>
54#include <linux/spinlock.h>
55#include <linux/workqueue.h>
56#include <linux/errno.h>
57#include <linux/types.h>
58#include <linux/wait.h>
59#include <linux/bitops.h>
60
61#include <asm/irq.h>
62#include <asm/byteorder.h>
63#include <scsi/scsi.h>
64#include <scsi/scsi_cmnd.h>
65#include <scsi/scsi_host.h>
66#include <scsi/scsi_tcq.h>
67#include <scsi/scsi_dbg.h>
68#include <scsi/scsi_eh.h>
69
70#include "ufs.h"
71#include "ufshci.h"
72
73#define UFSHCD "ufshcd"
74#define UFSHCD_DRIVER_VERSION "0.1"
75
76enum {
77 UFSHCD_MAX_CHANNEL = 0,
78 UFSHCD_MAX_ID = 1,
79 UFSHCD_MAX_LUNS = 8,
80 UFSHCD_CMD_PER_LUN = 32,
81 UFSHCD_CAN_QUEUE = 32,
82};
83
84/* UFSHCD states */
85enum {
86 UFSHCD_STATE_OPERATIONAL,
87 UFSHCD_STATE_RESET,
88 UFSHCD_STATE_ERROR,
89};
90
91/* Interrupt configuration options */
92enum {
93 UFSHCD_INT_DISABLE,
94 UFSHCD_INT_ENABLE,
95 UFSHCD_INT_CLEAR,
96};
97
98/* Interrupt aggregation options */
99enum {
100 INT_AGGR_RESET,
101 INT_AGGR_CONFIG,
102};
103
104/**
105 * struct uic_command - UIC command structure
106 * @command: UIC command
107 * @argument1: UIC command argument 1
108 * @argument2: UIC command argument 2
109 * @argument3: UIC command argument 3
110 * @cmd_active: Indicate if UIC command is outstanding
111 * @result: UIC command result
112 */
113struct uic_command {
114 u32 command;
115 u32 argument1;
116 u32 argument2;
117 u32 argument3;
118 int cmd_active;
119 int result;
120};
121
122/**
123 * struct ufs_hba - per adapter private structure
124 * @mmio_base: UFSHCI base register address
125 * @ucdl_base_addr: UFS Command Descriptor base address
126 * @utrdl_base_addr: UTP Transfer Request Descriptor base address
127 * @utmrdl_base_addr: UTP Task Management Descriptor base address
128 * @ucdl_dma_addr: UFS Command Descriptor DMA address
129 * @utrdl_dma_addr: UTRDL DMA address
130 * @utmrdl_dma_addr: UTMRDL DMA address
131 * @host: Scsi_Host instance of the driver
132 * @pdev: PCI device handle
133 * @lrb: local reference block
134 * @outstanding_tasks: Bits representing outstanding task requests
135 * @outstanding_reqs: Bits representing outstanding transfer requests
136 * @capabilities: UFS Controller Capabilities
137 * @nutrs: Transfer Request Queue depth supported by controller
138 * @nutmrs: Task Management Queue depth supported by controller
139 * @active_uic_cmd: handle of active UIC command
140 * @ufshcd_tm_wait_queue: wait queue for task management
141 * @tm_condition: condition variable for task management
142 * @ufshcd_state: UFSHCD states
143 * @int_enable_mask: Interrupt Mask Bits
144 * @uic_workq: Work queue for UIC completion handling
145 * @feh_workq: Work queue for fatal controller error handling
146 * @errors: HBA errors
147 */
148struct ufs_hba {
149 void __iomem *mmio_base;
150
151 /* Virtual memory reference */
152 struct utp_transfer_cmd_desc *ucdl_base_addr;
153 struct utp_transfer_req_desc *utrdl_base_addr;
154 struct utp_task_req_desc *utmrdl_base_addr;
155
156 /* DMA memory reference */
157 dma_addr_t ucdl_dma_addr;
158 dma_addr_t utrdl_dma_addr;
159 dma_addr_t utmrdl_dma_addr;
160
161 struct Scsi_Host *host;
162 struct pci_dev *pdev;
163
164 struct ufshcd_lrb *lrb;
165
166 unsigned long outstanding_tasks;
167 unsigned long outstanding_reqs;
168
169 u32 capabilities;
170 int nutrs;
171 int nutmrs;
172 u32 ufs_version;
173
174 struct uic_command active_uic_cmd;
175 wait_queue_head_t ufshcd_tm_wait_queue;
176 unsigned long tm_condition;
177
178 u32 ufshcd_state;
179 u32 int_enable_mask;
180
181 /* Work Queues */
182 struct work_struct uic_workq;
183 struct work_struct feh_workq;
184
185 /* HBA Errors */
186 u32 errors;
187};
188
189/**
190 * struct ufshcd_lrb - local reference block
191 * @utr_descriptor_ptr: UTRD address of the command
192 * @ucd_cmd_ptr: UCD address of the command
193 * @ucd_rsp_ptr: Response UPIU address for this command
194 * @ucd_prdt_ptr: PRDT address of the command
195 * @cmd: pointer to SCSI command
196 * @sense_buffer: pointer to sense buffer address of the SCSI command
197 * @sense_bufflen: Length of the sense buffer
198 * @scsi_status: SCSI status of the command
199 * @command_type: SCSI, UFS, Query.
200 * @task_tag: Task tag of the command
201 * @lun: LUN of the command
202 */
203struct ufshcd_lrb {
204 struct utp_transfer_req_desc *utr_descriptor_ptr;
205 struct utp_upiu_cmd *ucd_cmd_ptr;
206 struct utp_upiu_rsp *ucd_rsp_ptr;
207 struct ufshcd_sg_entry *ucd_prdt_ptr;
208
209 struct scsi_cmnd *cmd;
210 u8 *sense_buffer;
211 unsigned int sense_bufflen;
212 int scsi_status;
213
214 int command_type;
215 int task_tag;
216 unsigned int lun;
217};
218
219/**
220 * ufshcd_get_ufs_version - Get the UFS version supported by the HBA
221 * @hba - Pointer to adapter instance
222 *
223 * Returns UFSHCI version supported by the controller
224 */
225static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba)
226{
227 return readl(hba->mmio_base + REG_UFS_VERSION);
228}
229
230/**
231 * ufshcd_is_device_present - Check if any device connected to
232 * the host controller
233 * @reg_hcs - host controller status register value
234 *
235 * Returns 0 if device present, non-zero if no device detected
236 */
237static inline int ufshcd_is_device_present(u32 reg_hcs)
238{
239 return (DEVICE_PRESENT & reg_hcs) ? 0 : -1;
240}
241
242/**
243 * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status
244 * @lrb: pointer to local command reference block
245 *
246 * This function is used to get the OCS field from UTRD
247 * Returns the OCS field in the UTRD
248 */
249static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp)
250{
251 return lrbp->utr_descriptor_ptr->header.dword_2 & MASK_OCS;
252}
253
254/**
255 * ufshcd_get_tmr_ocs - Get the UTMRD Overall Command Status
256 * @task_req_descp: pointer to utp_task_req_desc structure
257 *
258 * This function is used to get the OCS field from UTMRD
259 * Returns the OCS field in the UTMRD
260 */
261static inline int
262ufshcd_get_tmr_ocs(struct utp_task_req_desc *task_req_descp)
263{
264 return task_req_descp->header.dword_2 & MASK_OCS;
265}
266
267/**
268 * ufshcd_get_tm_free_slot - get a free slot for task management request
269 * @hba: per adapter instance
270 *
271 * Returns maximum number of task management request slots in case of
272 * task management queue full or returns the free slot number
273 */
274static inline int ufshcd_get_tm_free_slot(struct ufs_hba *hba)
275{
276 return find_first_zero_bit(&hba->outstanding_tasks, hba->nutmrs);
277}
278
279/**
280 * ufshcd_utrl_clear - Clear a bit in UTRLCLR register
281 * @hba: per adapter instance
282 * @pos: position of the bit to be cleared
283 */
284static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos)
285{
286 writel(~(1 << pos),
287 (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_CLEAR));
288}
289
290/**
291 * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY
292 * @reg: Register value of host controller status
293 *
294 * Returns integer, 0 on Success and positive value if failed
295 */
296static inline int ufshcd_get_lists_status(u32 reg)
297{
298 /*
299 * The mask 0xFF is for the following HCS register bits
300 * Bit Description
301 * 0 Device Present
302 * 1 UTRLRDY
303 * 2 UTMRLRDY
304 * 3 UCRDY
305 * 4 HEI
306 * 5 DEI
307 * 6-7 reserved
308 */
309 return (((reg) & (0xFF)) >> 1) ^ (0x07);
310}
311
312/**
313 * ufshcd_get_uic_cmd_result - Get the UIC command result
314 * @hba: Pointer to adapter instance
315 *
316 * This function gets the result of UIC command completion
317 * Returns 0 on success, non zero value on error
318 */
319static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba)
320{
321 return readl(hba->mmio_base + REG_UIC_COMMAND_ARG_2) &
322 MASK_UIC_COMMAND_RESULT;
323}
324
325/**
326 * ufshcd_free_hba_memory - Free allocated memory for LRB, request
327 * and task lists
328 * @hba: Pointer to adapter instance
329 */
330static inline void ufshcd_free_hba_memory(struct ufs_hba *hba)
331{
332 size_t utmrdl_size, utrdl_size, ucdl_size;
333
334 kfree(hba->lrb);
335
336 if (hba->utmrdl_base_addr) {
337 utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs;
338 dma_free_coherent(&hba->pdev->dev, utmrdl_size,
339 hba->utmrdl_base_addr, hba->utmrdl_dma_addr);
340 }
341
342 if (hba->utrdl_base_addr) {
343 utrdl_size =
344 (sizeof(struct utp_transfer_req_desc) * hba->nutrs);
345 dma_free_coherent(&hba->pdev->dev, utrdl_size,
346 hba->utrdl_base_addr, hba->utrdl_dma_addr);
347 }
348
349 if (hba->ucdl_base_addr) {
350 ucdl_size =
351 (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs);
352 dma_free_coherent(&hba->pdev->dev, ucdl_size,
353 hba->ucdl_base_addr, hba->ucdl_dma_addr);
354 }
355}
356
357/**
358 * ufshcd_is_valid_req_rsp - checks if controller TR response is valid
359 * @ucd_rsp_ptr: pointer to response UPIU
360 *
361 * This function checks the response UPIU for valid transaction type in
362 * response field
363 * Returns 0 on success, non-zero on failure
364 */
365static inline int
366ufshcd_is_valid_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr)
367{
368 return ((be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24) ==
369 UPIU_TRANSACTION_RESPONSE) ? 0 : DID_ERROR << 16;
370}
371
372/**
373 * ufshcd_get_rsp_upiu_result - Get the result from response UPIU
374 * @ucd_rsp_ptr: pointer to response UPIU
375 *
376 * This function gets the response status and scsi_status from response UPIU
377 * Returns the response result code.
378 */
379static inline int
380ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr)
381{
382 return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT;
383}
384
385/**
386 * ufshcd_config_int_aggr - Configure interrupt aggregation values.
387 * Currently there is no use case where we want to configure
388 * interrupt aggregation dynamically. So to configure interrupt
389 * aggregation, #define INT_AGGR_COUNTER_THRESHOLD_VALUE and
390 * INT_AGGR_TIMEOUT_VALUE are used.
391 * @hba: per adapter instance
392 * @option: Interrupt aggregation option
393 */
394static inline void
395ufshcd_config_int_aggr(struct ufs_hba *hba, int option)
396{
397 switch (option) {
398 case INT_AGGR_RESET:
399 writel((INT_AGGR_ENABLE |
400 INT_AGGR_COUNTER_AND_TIMER_RESET),
401 (hba->mmio_base +
402 REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL));
403 break;
404 case INT_AGGR_CONFIG:
405 writel((INT_AGGR_ENABLE |
406 INT_AGGR_PARAM_WRITE |
407 INT_AGGR_COUNTER_THRESHOLD_VALUE |
408 INT_AGGR_TIMEOUT_VALUE),
409 (hba->mmio_base +
410 REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL));
411 break;
412 }
413}
414
415/**
416 * ufshcd_enable_run_stop_reg - Enable run-stop registers,
417 * When run-stop registers are set to 1, it indicates the
418 * host controller that it can process the requests
419 * @hba: per adapter instance
420 */
421static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba)
422{
423 writel(UTP_TASK_REQ_LIST_RUN_STOP_BIT,
424 (hba->mmio_base +
425 REG_UTP_TASK_REQ_LIST_RUN_STOP));
426 writel(UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT,
427 (hba->mmio_base +
428 REG_UTP_TRANSFER_REQ_LIST_RUN_STOP));
429}
430
431/**
432 * ufshcd_hba_stop - Send controller to reset state
433 * @hba: per adapter instance
434 */
435static inline void ufshcd_hba_stop(struct ufs_hba *hba)
436{
437 writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE));
438}
439
440/**
441 * ufshcd_hba_start - Start controller initialization sequence
442 * @hba: per adapter instance
443 */
444static inline void ufshcd_hba_start(struct ufs_hba *hba)
445{
446 writel(CONTROLLER_ENABLE , (hba->mmio_base + REG_CONTROLLER_ENABLE));
447}
448
449/**
450 * ufshcd_is_hba_active - Get controller state
451 * @hba: per adapter instance
452 *
453 * Returns zero if controller is active, 1 otherwise
454 */
455static inline int ufshcd_is_hba_active(struct ufs_hba *hba)
456{
457 return (readl(hba->mmio_base + REG_CONTROLLER_ENABLE) & 0x1) ? 0 : 1;
458}
459
460/**
461 * ufshcd_send_command - Send SCSI or device management commands
462 * @hba: per adapter instance
463 * @task_tag: Task tag of the command
464 */
465static inline
466void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
467{
468 __set_bit(task_tag, &hba->outstanding_reqs);
469 writel((1 << task_tag),
470 (hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL));
471}
472
473/**
474 * ufshcd_copy_sense_data - Copy sense data in case of check condition
475 * @lrb - pointer to local reference block
476 */
477static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
478{
479 int len;
480 if (lrbp->sense_buffer) {
481 len = be16_to_cpu(lrbp->ucd_rsp_ptr->sense_data_len);
482 memcpy(lrbp->sense_buffer,
483 lrbp->ucd_rsp_ptr->sense_data,
484 min_t(int, len, SCSI_SENSE_BUFFERSIZE));
485 }
486}
487
488/**
489 * ufshcd_hba_capabilities - Read controller capabilities
490 * @hba: per adapter instance
491 */
492static inline void ufshcd_hba_capabilities(struct ufs_hba *hba)
493{
494 hba->capabilities =
495 readl(hba->mmio_base + REG_CONTROLLER_CAPABILITIES);
496
497 /* nutrs and nutmrs are 0 based values */
498 hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1;
499 hba->nutmrs =
500 ((hba->capabilities & MASK_TASK_MANAGEMENT_REQUEST_SLOTS) >> 16) + 1;
501}
502
503/**
504 * ufshcd_send_uic_command - Send UIC commands to unipro layers
505 * @hba: per adapter instance
506 * @uic_command: UIC command
507 */
508static inline void
509ufshcd_send_uic_command(struct ufs_hba *hba, struct uic_command *uic_cmnd)
510{
511 /* Write Args */
512 writel(uic_cmnd->argument1,
513 (hba->mmio_base + REG_UIC_COMMAND_ARG_1));
514 writel(uic_cmnd->argument2,
515 (hba->mmio_base + REG_UIC_COMMAND_ARG_2));
516 writel(uic_cmnd->argument3,
517 (hba->mmio_base + REG_UIC_COMMAND_ARG_3));
518
519 /* Write UIC Cmd */
520 writel((uic_cmnd->command & COMMAND_OPCODE_MASK),
521 (hba->mmio_base + REG_UIC_COMMAND));
522}
523
524/**
525 * ufshcd_map_sg - Map scatter-gather list to prdt
526 * @lrbp - pointer to local reference block
527 *
528 * Returns 0 in case of success, non-zero value in case of failure
529 */
530static int ufshcd_map_sg(struct ufshcd_lrb *lrbp)
531{
532 struct ufshcd_sg_entry *prd_table;
533 struct scatterlist *sg;
534 struct scsi_cmnd *cmd;
535 int sg_segments;
536 int i;
537
538 cmd = lrbp->cmd;
539 sg_segments = scsi_dma_map(cmd);
540 if (sg_segments < 0)
541 return sg_segments;
542
543 if (sg_segments) {
544 lrbp->utr_descriptor_ptr->prd_table_length =
545 cpu_to_le16((u16) (sg_segments));
546
547 prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr;
548
549 scsi_for_each_sg(cmd, sg, sg_segments, i) {
550 prd_table[i].size =
551 cpu_to_le32(((u32) sg_dma_len(sg))-1);
552 prd_table[i].base_addr =
553 cpu_to_le32(lower_32_bits(sg->dma_address));
554 prd_table[i].upper_addr =
555 cpu_to_le32(upper_32_bits(sg->dma_address));
556 }
557 } else {
558 lrbp->utr_descriptor_ptr->prd_table_length = 0;
559 }
560
561 return 0;
562}
563
564/**
565 * ufshcd_int_config - enable/disable interrupts
566 * @hba: per adapter instance
567 * @option: interrupt option
568 */
569static void ufshcd_int_config(struct ufs_hba *hba, u32 option)
570{
571 switch (option) {
572 case UFSHCD_INT_ENABLE:
573 writel(hba->int_enable_mask,
574 (hba->mmio_base + REG_INTERRUPT_ENABLE));
575 break;
576 case UFSHCD_INT_DISABLE:
577 if (hba->ufs_version == UFSHCI_VERSION_10)
578 writel(INTERRUPT_DISABLE_MASK_10,
579 (hba->mmio_base + REG_INTERRUPT_ENABLE));
580 else
581 writel(INTERRUPT_DISABLE_MASK_11,
582 (hba->mmio_base + REG_INTERRUPT_ENABLE));
583 break;
584 }
585}
586
587/**
588 * ufshcd_compose_upiu - form UFS Protocol Information Unit(UPIU)
589 * @lrb - pointer to local reference block
590 */
591static void ufshcd_compose_upiu(struct ufshcd_lrb *lrbp)
592{
593 struct utp_transfer_req_desc *req_desc;
594 struct utp_upiu_cmd *ucd_cmd_ptr;
595 u32 data_direction;
596 u32 upiu_flags;
597
598 ucd_cmd_ptr = lrbp->ucd_cmd_ptr;
599 req_desc = lrbp->utr_descriptor_ptr;
600
601 switch (lrbp->command_type) {
602 case UTP_CMD_TYPE_SCSI:
603 if (lrbp->cmd->sc_data_direction == DMA_FROM_DEVICE) {
604 data_direction = UTP_DEVICE_TO_HOST;
605 upiu_flags = UPIU_CMD_FLAGS_READ;
606 } else if (lrbp->cmd->sc_data_direction == DMA_TO_DEVICE) {
607 data_direction = UTP_HOST_TO_DEVICE;
608 upiu_flags = UPIU_CMD_FLAGS_WRITE;
609 } else {
610 data_direction = UTP_NO_DATA_TRANSFER;
611 upiu_flags = UPIU_CMD_FLAGS_NONE;
612 }
613
614 /* Transfer request descriptor header fields */
615 req_desc->header.dword_0 =
616 cpu_to_le32(data_direction | UTP_SCSI_COMMAND);
617
618 /*
619 * assigning invalid value for command status. Controller
620 * updates OCS on command completion, with the command
621 * status
622 */
623 req_desc->header.dword_2 =
624 cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
625
626 /* command descriptor fields */
627 ucd_cmd_ptr->header.dword_0 =
628 cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_COMMAND,
629 upiu_flags,
630 lrbp->lun,
631 lrbp->task_tag));
632 ucd_cmd_ptr->header.dword_1 =
633 cpu_to_be32(
634 UPIU_HEADER_DWORD(UPIU_COMMAND_SET_TYPE_SCSI,
635 0,
636 0,
637 0));
638
639 /* Total EHS length and Data segment length will be zero */
640 ucd_cmd_ptr->header.dword_2 = 0;
641
642 ucd_cmd_ptr->exp_data_transfer_len =
643 cpu_to_be32(lrbp->cmd->transfersize);
644
645 memcpy(ucd_cmd_ptr->cdb,
646 lrbp->cmd->cmnd,
647 (min_t(unsigned short,
648 lrbp->cmd->cmd_len,
649 MAX_CDB_SIZE)));
650 break;
651 case UTP_CMD_TYPE_DEV_MANAGE:
652 /* For query function implementation */
653 break;
654 case UTP_CMD_TYPE_UFS:
655 /* For UFS native command implementation */
656 break;
657 } /* end of switch */
658}
659
660/**
661 * ufshcd_queuecommand - main entry point for SCSI requests
662 * @cmd: command from SCSI Midlayer
663 * @done: call back function
664 *
665 * Returns 0 for success, non-zero in case of failure
666 */
667static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
668{
669 struct ufshcd_lrb *lrbp;
670 struct ufs_hba *hba;
671 unsigned long flags;
672 int tag;
673 int err = 0;
674
675 hba = shost_priv(host);
676
677 tag = cmd->request->tag;
678
679 if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) {
680 err = SCSI_MLQUEUE_HOST_BUSY;
681 goto out;
682 }
683
684 lrbp = &hba->lrb[tag];
685
686 lrbp->cmd = cmd;
687 lrbp->sense_bufflen = SCSI_SENSE_BUFFERSIZE;
688 lrbp->sense_buffer = cmd->sense_buffer;
689 lrbp->task_tag = tag;
690 lrbp->lun = cmd->device->lun;
691
692 lrbp->command_type = UTP_CMD_TYPE_SCSI;
693
694 /* form UPIU before issuing the command */
695 ufshcd_compose_upiu(lrbp);
696 err = ufshcd_map_sg(lrbp);
697 if (err)
698 goto out;
699
700 /* issue command to the controller */
701 spin_lock_irqsave(hba->host->host_lock, flags);
702 ufshcd_send_command(hba, tag);
703 spin_unlock_irqrestore(hba->host->host_lock, flags);
704out:
705 return err;
706}
707
708/**
709 * ufshcd_memory_alloc - allocate memory for host memory space data structures
710 * @hba: per adapter instance
711 *
712 * 1. Allocate DMA memory for Command Descriptor array
713 * Each command descriptor consist of Command UPIU, Response UPIU and PRDT
714 * 2. Allocate DMA memory for UTP Transfer Request Descriptor List (UTRDL).
715 * 3. Allocate DMA memory for UTP Task Management Request Descriptor List
716 * (UTMRDL)
717 * 4. Allocate memory for local reference block(lrb).
718 *
719 * Returns 0 for success, non-zero in case of failure
720 */
721static int ufshcd_memory_alloc(struct ufs_hba *hba)
722{
723 size_t utmrdl_size, utrdl_size, ucdl_size;
724
725 /* Allocate memory for UTP command descriptors */
726 ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs);
727 hba->ucdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
728 ucdl_size,
729 &hba->ucdl_dma_addr,
730 GFP_KERNEL);
731
732 /*
733 * UFSHCI requires UTP command descriptor to be 128 byte aligned.
734 * make sure hba->ucdl_dma_addr is aligned to PAGE_SIZE
735 * if hba->ucdl_dma_addr is aligned to PAGE_SIZE, then it will
736 * be aligned to 128 bytes as well
737 */
738 if (!hba->ucdl_base_addr ||
739 WARN_ON(hba->ucdl_dma_addr & (PAGE_SIZE - 1))) {
740 dev_err(&hba->pdev->dev,
741 "Command Descriptor Memory allocation failed\n");
742 goto out;
743 }
744
745 /*
746 * Allocate memory for UTP Transfer descriptors
747 * UFSHCI requires 1024 byte alignment of UTRD
748 */
749 utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs);
750 hba->utrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
751 utrdl_size,
752 &hba->utrdl_dma_addr,
753 GFP_KERNEL);
754 if (!hba->utrdl_base_addr ||
755 WARN_ON(hba->utrdl_dma_addr & (PAGE_SIZE - 1))) {
756 dev_err(&hba->pdev->dev,
757 "Transfer Descriptor Memory allocation failed\n");
758 goto out;
759 }
760
761 /*
762 * Allocate memory for UTP Task Management descriptors
763 * UFSHCI requires 1024 byte alignment of UTMRD
764 */
765 utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs;
766 hba->utmrdl_base_addr = dma_alloc_coherent(&hba->pdev->dev,
767 utmrdl_size,
768 &hba->utmrdl_dma_addr,
769 GFP_KERNEL);
770 if (!hba->utmrdl_base_addr ||
771 WARN_ON(hba->utmrdl_dma_addr & (PAGE_SIZE - 1))) {
772 dev_err(&hba->pdev->dev,
773 "Task Management Descriptor Memory allocation failed\n");
774 goto out;
775 }
776
777 /* Allocate memory for local reference block */
778 hba->lrb = kcalloc(hba->nutrs, sizeof(struct ufshcd_lrb), GFP_KERNEL);
779 if (!hba->lrb) {
780 dev_err(&hba->pdev->dev, "LRB Memory allocation failed\n");
781 goto out;
782 }
783 return 0;
784out:
785 ufshcd_free_hba_memory(hba);
786 return -ENOMEM;
787}
788
789/**
790 * ufshcd_host_memory_configure - configure local reference block with
791 * memory offsets
792 * @hba: per adapter instance
793 *
794 * Configure Host memory space
795 * 1. Update Corresponding UTRD.UCDBA and UTRD.UCDBAU with UCD DMA
796 * address.
797 * 2. Update each UTRD with Response UPIU offset, Response UPIU length
798 * and PRDT offset.
799 * 3. Save the corresponding addresses of UTRD, UCD.CMD, UCD.RSP and UCD.PRDT
800 * into local reference block.
801 */
802static void ufshcd_host_memory_configure(struct ufs_hba *hba)
803{
804 struct utp_transfer_cmd_desc *cmd_descp;
805 struct utp_transfer_req_desc *utrdlp;
806 dma_addr_t cmd_desc_dma_addr;
807 dma_addr_t cmd_desc_element_addr;
808 u16 response_offset;
809 u16 prdt_offset;
810 int cmd_desc_size;
811 int i;
812
813 utrdlp = hba->utrdl_base_addr;
814 cmd_descp = hba->ucdl_base_addr;
815
816 response_offset =
817 offsetof(struct utp_transfer_cmd_desc, response_upiu);
818 prdt_offset =
819 offsetof(struct utp_transfer_cmd_desc, prd_table);
820
821 cmd_desc_size = sizeof(struct utp_transfer_cmd_desc);
822 cmd_desc_dma_addr = hba->ucdl_dma_addr;
823
824 for (i = 0; i < hba->nutrs; i++) {
825 /* Configure UTRD with command descriptor base address */
826 cmd_desc_element_addr =
827 (cmd_desc_dma_addr + (cmd_desc_size * i));
828 utrdlp[i].command_desc_base_addr_lo =
829 cpu_to_le32(lower_32_bits(cmd_desc_element_addr));
830 utrdlp[i].command_desc_base_addr_hi =
831 cpu_to_le32(upper_32_bits(cmd_desc_element_addr));
832
833 /* Response upiu and prdt offset should be in double words */
834 utrdlp[i].response_upiu_offset =
835 cpu_to_le16((response_offset >> 2));
836 utrdlp[i].prd_table_offset =
837 cpu_to_le16((prdt_offset >> 2));
838 utrdlp[i].response_upiu_length =
839 cpu_to_le16(ALIGNED_UPIU_SIZE);
840
841 hba->lrb[i].utr_descriptor_ptr = (utrdlp + i);
842 hba->lrb[i].ucd_cmd_ptr =
843 (struct utp_upiu_cmd *)(cmd_descp + i);
844 hba->lrb[i].ucd_rsp_ptr =
845 (struct utp_upiu_rsp *)cmd_descp[i].response_upiu;
846 hba->lrb[i].ucd_prdt_ptr =
847 (struct ufshcd_sg_entry *)cmd_descp[i].prd_table;
848 }
849}
850
851/**
852 * ufshcd_dme_link_startup - Notify Unipro to perform link startup
853 * @hba: per adapter instance
854 *
855 * UIC_CMD_DME_LINK_STARTUP command must be issued to Unipro layer,
856 * in order to initialize the Unipro link startup procedure.
857 * Once the Unipro links are up, the device connected to the controller
858 * is detected.
859 *
860 * Returns 0 on success, non-zero value on failure
861 */
862static int ufshcd_dme_link_startup(struct ufs_hba *hba)
863{
864 struct uic_command *uic_cmd;
865 unsigned long flags;
866
867 /* check if controller is ready to accept UIC commands */
868 if (((readl(hba->mmio_base + REG_CONTROLLER_STATUS)) &
869 UIC_COMMAND_READY) == 0x0) {
870 dev_err(&hba->pdev->dev,
871 "Controller not ready"
872 " to accept UIC commands\n");
873 return -EIO;
874 }
875
876 spin_lock_irqsave(hba->host->host_lock, flags);
877
878 /* form UIC command */
879 uic_cmd = &hba->active_uic_cmd;
880 uic_cmd->command = UIC_CMD_DME_LINK_STARTUP;
881 uic_cmd->argument1 = 0;
882 uic_cmd->argument2 = 0;
883 uic_cmd->argument3 = 0;
884
885 /* enable UIC related interrupts */
886 hba->int_enable_mask |= UIC_COMMAND_COMPL;
887 ufshcd_int_config(hba, UFSHCD_INT_ENABLE);
888
889 /* sending UIC commands to controller */
890 ufshcd_send_uic_command(hba, uic_cmd);
891 spin_unlock_irqrestore(hba->host->host_lock, flags);
892 return 0;
893}
894
895/**
896 * ufshcd_make_hba_operational - Make UFS controller operational
897 * @hba: per adapter instance
898 *
899 * To bring UFS host controller to operational state,
900 * 1. Check if device is present
901 * 2. Configure run-stop-registers
902 * 3. Enable required interrupts
903 * 4. Configure interrupt aggregation
904 *
905 * Returns 0 on success, non-zero value on failure
906 */
907static int ufshcd_make_hba_operational(struct ufs_hba *hba)
908{
909 int err = 0;
910 u32 reg;
911
912 /* check if device present */
913 reg = readl((hba->mmio_base + REG_CONTROLLER_STATUS));
914 if (ufshcd_is_device_present(reg)) {
915 dev_err(&hba->pdev->dev, "cc: Device not present\n");
916 err = -ENXIO;
917 goto out;
918 }
919
920 /*
921 * UCRDY, UTMRLDY and UTRLRDY bits must be 1
922 * DEI, HEI bits must be 0
923 */
924 if (!(ufshcd_get_lists_status(reg))) {
925 ufshcd_enable_run_stop_reg(hba);
926 } else {
927 dev_err(&hba->pdev->dev,
928 "Host controller not ready to process requests");
929 err = -EIO;
930 goto out;
931 }
932
933 /* Enable required interrupts */
934 hba->int_enable_mask |= (UTP_TRANSFER_REQ_COMPL |
935 UIC_ERROR |
936 UTP_TASK_REQ_COMPL |
937 DEVICE_FATAL_ERROR |
938 CONTROLLER_FATAL_ERROR |
939 SYSTEM_BUS_FATAL_ERROR);
940 ufshcd_int_config(hba, UFSHCD_INT_ENABLE);
941
942 /* Configure interrupt aggregation */
943 ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG);
944
945 if (hba->ufshcd_state == UFSHCD_STATE_RESET)
946 scsi_unblock_requests(hba->host);
947
948 hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
949 scsi_scan_host(hba->host);
950out:
951 return err;
952}
953
954/**
955 * ufshcd_hba_enable - initialize the controller
956 * @hba: per adapter instance
957 *
958 * The controller resets itself and controller firmware initialization
959 * sequence kicks off. When controller is ready it will set
960 * the Host Controller Enable bit to 1.
961 *
962 * Returns 0 on success, non-zero value on failure
963 */
964static int ufshcd_hba_enable(struct ufs_hba *hba)
965{
966 int retry;
967
968 /*
969 * msleep of 1 and 5 used in this function might result in msleep(20),
970 * but it was necessary to send the UFS FPGA to reset mode during
971 * development and testing of this driver. msleep can be changed to
972 * mdelay and retry count can be reduced based on the controller.
973 */
974 if (!ufshcd_is_hba_active(hba)) {
975
976 /* change controller state to "reset state" */
977 ufshcd_hba_stop(hba);
978
979 /*
980 * This delay is based on the testing done with UFS host
981 * controller FPGA. The delay can be changed based on the
982 * host controller used.
983 */
984 msleep(5);
985 }
986
987 /* start controller initialization sequence */
988 ufshcd_hba_start(hba);
989
990 /*
991 * To initialize a UFS host controller HCE bit must be set to 1.
992 * During initialization the HCE bit value changes from 1->0->1.
993 * When the host controller completes initialization sequence
994 * it sets the value of HCE bit to 1. The same HCE bit is read back
995 * to check if the controller has completed initialization sequence.
996 * So without this delay the value HCE = 1, set in the previous
997 * instruction might be read back.
998 * This delay can be changed based on the controller.
999 */
1000 msleep(1);
1001
1002 /* wait for the host controller to complete initialization */
1003 retry = 10;
1004 while (ufshcd_is_hba_active(hba)) {
1005 if (retry) {
1006 retry--;
1007 } else {
1008 dev_err(&hba->pdev->dev,
1009 "Controller enable failed\n");
1010 return -EIO;
1011 }
1012 msleep(5);
1013 }
1014 return 0;
1015}
1016
1017/**
1018 * ufshcd_initialize_hba - start the initialization process
1019 * @hba: per adapter instance
1020 *
1021 * 1. Enable the controller via ufshcd_hba_enable.
1022 * 2. Program the Transfer Request List Address with the starting address of
1023 * UTRDL.
1024 * 3. Program the Task Management Request List Address with starting address
1025 * of UTMRDL.
1026 *
1027 * Returns 0 on success, non-zero value on failure.
1028 */
1029static int ufshcd_initialize_hba(struct ufs_hba *hba)
1030{
1031 if (ufshcd_hba_enable(hba))
1032 return -EIO;
1033
1034 /* Configure UTRL and UTMRL base address registers */
1035 writel(hba->utrdl_dma_addr,
1036 (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_L));
1037 writel(lower_32_bits(hba->utrdl_dma_addr),
1038 (hba->mmio_base + REG_UTP_TRANSFER_REQ_LIST_BASE_H));
1039 writel(hba->utmrdl_dma_addr,
1040 (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_L));
1041 writel(upper_32_bits(hba->utmrdl_dma_addr),
1042 (hba->mmio_base + REG_UTP_TASK_REQ_LIST_BASE_H));
1043
1044 /* Initialize unipro link startup procedure */
1045 return ufshcd_dme_link_startup(hba);
1046}
1047
1048/**
1049 * ufshcd_do_reset - reset the host controller
1050 * @hba: per adapter instance
1051 *
1052 * Returns SUCCESS/FAILED
1053 */
1054static int ufshcd_do_reset(struct ufs_hba *hba)
1055{
1056 struct ufshcd_lrb *lrbp;
1057 unsigned long flags;
1058 int tag;
1059
1060 /* block commands from midlayer */
1061 scsi_block_requests(hba->host);
1062
1063 spin_lock_irqsave(hba->host->host_lock, flags);
1064 hba->ufshcd_state = UFSHCD_STATE_RESET;
1065
1066 /* send controller to reset state */
1067 ufshcd_hba_stop(hba);
1068 spin_unlock_irqrestore(hba->host->host_lock, flags);
1069
1070 /* abort outstanding commands */
1071 for (tag = 0; tag < hba->nutrs; tag++) {
1072 if (test_bit(tag, &hba->outstanding_reqs)) {
1073 lrbp = &hba->lrb[tag];
1074 scsi_dma_unmap(lrbp->cmd);
1075 lrbp->cmd->result = DID_RESET << 16;
1076 lrbp->cmd->scsi_done(lrbp->cmd);
1077 lrbp->cmd = NULL;
1078 }
1079 }
1080
1081 /* clear outstanding request/task bit maps */
1082 hba->outstanding_reqs = 0;
1083 hba->outstanding_tasks = 0;
1084
1085 /* start the initialization process */
1086 if (ufshcd_initialize_hba(hba)) {
1087 dev_err(&hba->pdev->dev,
1088 "Reset: Controller initialization failed\n");
1089 return FAILED;
1090 }
1091 return SUCCESS;
1092}
1093
1094/**
1095 * ufshcd_slave_alloc - handle initial SCSI device configurations
1096 * @sdev: pointer to SCSI device
1097 *
1098 * Returns success
1099 */
1100static int ufshcd_slave_alloc(struct scsi_device *sdev)
1101{
1102 struct ufs_hba *hba;
1103
1104 hba = shost_priv(sdev->host);
1105 sdev->tagged_supported = 1;
1106
1107 /* Mode sense(6) is not supported by UFS, so use Mode sense(10) */
1108 sdev->use_10_for_ms = 1;
1109 scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
1110
1111 /*
1112 * Inform SCSI Midlayer that the LUN queue depth is same as the
1113 * controller queue depth. If a LUN queue depth is less than the
1114 * controller queue depth and if the LUN reports
1115 * SAM_STAT_TASK_SET_FULL, the LUN queue depth will be adjusted
1116 * with scsi_adjust_queue_depth.
1117 */
1118 scsi_activate_tcq(sdev, hba->nutrs);
1119 return 0;
1120}
1121
1122/**
1123 * ufshcd_slave_destroy - remove SCSI device configurations
1124 * @sdev: pointer to SCSI device
1125 */
1126static void ufshcd_slave_destroy(struct scsi_device *sdev)
1127{
1128 struct ufs_hba *hba;
1129
1130 hba = shost_priv(sdev->host);
1131 scsi_deactivate_tcq(sdev, hba->nutrs);
1132}
1133
1134/**
1135 * ufshcd_task_req_compl - handle task management request completion
1136 * @hba: per adapter instance
1137 * @index: index of the completed request
1138 *
1139 * Returns SUCCESS/FAILED
1140 */
1141static int ufshcd_task_req_compl(struct ufs_hba *hba, u32 index)
1142{
1143 struct utp_task_req_desc *task_req_descp;
1144 struct utp_upiu_task_rsp *task_rsp_upiup;
1145 unsigned long flags;
1146 int ocs_value;
1147 int task_result;
1148
1149 spin_lock_irqsave(hba->host->host_lock, flags);
1150
1151 /* Clear completed tasks from outstanding_tasks */
1152 __clear_bit(index, &hba->outstanding_tasks);
1153
1154 task_req_descp = hba->utmrdl_base_addr;
1155 ocs_value = ufshcd_get_tmr_ocs(&task_req_descp[index]);
1156
1157 if (ocs_value == OCS_SUCCESS) {
1158 task_rsp_upiup = (struct utp_upiu_task_rsp *)
1159 task_req_descp[index].task_rsp_upiu;
1160 task_result = be32_to_cpu(task_rsp_upiup->header.dword_1);
1161 task_result = ((task_result & MASK_TASK_RESPONSE) >> 8);
1162
1163 if (task_result != UPIU_TASK_MANAGEMENT_FUNC_COMPL ||
1164 task_result != UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED)
1165 task_result = FAILED;
1166 } else {
1167 task_result = FAILED;
1168 dev_err(&hba->pdev->dev,
1169 "trc: Invalid ocs = %x\n", ocs_value);
1170 }
1171 spin_unlock_irqrestore(hba->host->host_lock, flags);
1172 return task_result;
1173}
1174
1175/**
1176 * ufshcd_adjust_lun_qdepth - Update LUN queue depth if device responds with
1177 * SAM_STAT_TASK_SET_FULL SCSI command status.
1178 * @cmd: pointer to SCSI command
1179 */
1180static void ufshcd_adjust_lun_qdepth(struct scsi_cmnd *cmd)
1181{
1182 struct ufs_hba *hba;
1183 int i;
1184 int lun_qdepth = 0;
1185
1186 hba = shost_priv(cmd->device->host);
1187
1188 /*
1189 * LUN queue depth can be obtained by counting outstanding commands
1190 * on the LUN.
1191 */
1192 for (i = 0; i < hba->nutrs; i++) {
1193 if (test_bit(i, &hba->outstanding_reqs)) {
1194
1195 /*
1196 * Check if the outstanding command belongs
1197 * to the LUN which reported SAM_STAT_TASK_SET_FULL.
1198 */
1199 if (cmd->device->lun == hba->lrb[i].lun)
1200 lun_qdepth++;
1201 }
1202 }
1203
1204 /*
1205 * LUN queue depth will be total outstanding commands, except the
1206 * command for which the LUN reported SAM_STAT_TASK_SET_FULL.
1207 */
1208 scsi_adjust_queue_depth(cmd->device, MSG_SIMPLE_TAG, lun_qdepth - 1);
1209}
1210
1211/**
1212 * ufshcd_scsi_cmd_status - Update SCSI command result based on SCSI status
1213 * @lrb: pointer to local reference block of completed command
1214 * @scsi_status: SCSI command status
1215 *
1216 * Returns value base on SCSI command status
1217 */
1218static inline int
1219ufshcd_scsi_cmd_status(struct ufshcd_lrb *lrbp, int scsi_status)
1220{
1221 int result = 0;
1222
1223 switch (scsi_status) {
1224 case SAM_STAT_GOOD:
1225 result |= DID_OK << 16 |
1226 COMMAND_COMPLETE << 8 |
1227 SAM_STAT_GOOD;
1228 break;
1229 case SAM_STAT_CHECK_CONDITION:
1230 result |= DID_OK << 16 |
1231 COMMAND_COMPLETE << 8 |
1232 SAM_STAT_CHECK_CONDITION;
1233 ufshcd_copy_sense_data(lrbp);
1234 break;
1235 case SAM_STAT_BUSY:
1236 result |= SAM_STAT_BUSY;
1237 break;
1238 case SAM_STAT_TASK_SET_FULL:
1239
1240 /*
1241 * If a LUN reports SAM_STAT_TASK_SET_FULL, then the LUN queue
1242 * depth needs to be adjusted to the exact number of
1243 * outstanding commands the LUN can handle at any given time.
1244 */
1245 ufshcd_adjust_lun_qdepth(lrbp->cmd);
1246 result |= SAM_STAT_TASK_SET_FULL;
1247 break;
1248 case SAM_STAT_TASK_ABORTED:
1249 result |= SAM_STAT_TASK_ABORTED;
1250 break;
1251 default:
1252 result |= DID_ERROR << 16;
1253 break;
1254 } /* end of switch */
1255
1256 return result;
1257}
1258
1259/**
1260 * ufshcd_transfer_rsp_status - Get overall status of the response
1261 * @hba: per adapter instance
1262 * @lrb: pointer to local reference block of completed command
1263 *
1264 * Returns result of the command to notify SCSI midlayer
1265 */
1266static inline int
1267ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
1268{
1269 int result = 0;
1270 int scsi_status;
1271 int ocs;
1272
1273 /* overall command status of utrd */
1274 ocs = ufshcd_get_tr_ocs(lrbp);
1275
1276 switch (ocs) {
1277 case OCS_SUCCESS:
1278
1279 /* check if the returned transfer response is valid */
1280 result = ufshcd_is_valid_req_rsp(lrbp->ucd_rsp_ptr);
1281 if (result) {
1282 dev_err(&hba->pdev->dev,
1283 "Invalid response = %x\n", result);
1284 break;
1285 }
1286
1287 /*
1288 * get the response UPIU result to extract
1289 * the SCSI command status
1290 */
1291 result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr);
1292
1293 /*
1294 * get the result based on SCSI status response
1295 * to notify the SCSI midlayer of the command status
1296 */
1297 scsi_status = result & MASK_SCSI_STATUS;
1298 result = ufshcd_scsi_cmd_status(lrbp, scsi_status);
1299 break;
1300 case OCS_ABORTED:
1301 result |= DID_ABORT << 16;
1302 break;
1303 case OCS_INVALID_CMD_TABLE_ATTR:
1304 case OCS_INVALID_PRDT_ATTR:
1305 case OCS_MISMATCH_DATA_BUF_SIZE:
1306 case OCS_MISMATCH_RESP_UPIU_SIZE:
1307 case OCS_PEER_COMM_FAILURE:
1308 case OCS_FATAL_ERROR:
1309 default:
1310 result |= DID_ERROR << 16;
1311 dev_err(&hba->pdev->dev,
1312 "OCS error from controller = %x\n", ocs);
1313 break;
1314 } /* end of switch */
1315
1316 return result;
1317}
1318
1319/**
1320 * ufshcd_transfer_req_compl - handle SCSI and query command completion
1321 * @hba: per adapter instance
1322 */
1323static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
1324{
1325 struct ufshcd_lrb *lrb;
1326 unsigned long completed_reqs;
1327 u32 tr_doorbell;
1328 int result;
1329 int index;
1330
1331 lrb = hba->lrb;
1332 tr_doorbell =
1333 readl(hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL);
1334 completed_reqs = tr_doorbell ^ hba->outstanding_reqs;
1335
1336 for (index = 0; index < hba->nutrs; index++) {
1337 if (test_bit(index, &completed_reqs)) {
1338
1339 result = ufshcd_transfer_rsp_status(hba, &lrb[index]);
1340
1341 if (lrb[index].cmd) {
1342 scsi_dma_unmap(lrb[index].cmd);
1343 lrb[index].cmd->result = result;
1344 lrb[index].cmd->scsi_done(lrb[index].cmd);
1345
1346 /* Mark completed command as NULL in LRB */
1347 lrb[index].cmd = NULL;
1348 }
1349 } /* end of if */
1350 } /* end of for */
1351
1352 /* clear corresponding bits of completed commands */
1353 hba->outstanding_reqs ^= completed_reqs;
1354
1355 /* Reset interrupt aggregation counters */
1356 ufshcd_config_int_aggr(hba, INT_AGGR_RESET);
1357}
1358
1359/**
1360 * ufshcd_uic_cc_handler - handle UIC command completion
1361 * @work: pointer to a work queue structure
1362 *
1363 * Returns 0 on success, non-zero value on failure
1364 */
1365static void ufshcd_uic_cc_handler (struct work_struct *work)
1366{
1367 struct ufs_hba *hba;
1368
1369 hba = container_of(work, struct ufs_hba, uic_workq);
1370
1371 if ((hba->active_uic_cmd.command == UIC_CMD_DME_LINK_STARTUP) &&
1372 !(ufshcd_get_uic_cmd_result(hba))) {
1373
1374 if (ufshcd_make_hba_operational(hba))
1375 dev_err(&hba->pdev->dev,
1376 "cc: hba not operational state\n");
1377 return;
1378 }
1379}
1380
1381/**
1382 * ufshcd_fatal_err_handler - handle fatal errors
1383 * @hba: per adapter instance
1384 */
1385static void ufshcd_fatal_err_handler(struct work_struct *work)
1386{
1387 struct ufs_hba *hba;
1388 hba = container_of(work, struct ufs_hba, feh_workq);
1389
1390 /* check if reset is already in progress */
1391 if (hba->ufshcd_state != UFSHCD_STATE_RESET)
1392 ufshcd_do_reset(hba);
1393}
1394
1395/**
1396 * ufshcd_err_handler - Check for fatal errors
1397 * @work: pointer to a work queue structure
1398 */
1399static void ufshcd_err_handler(struct ufs_hba *hba)
1400{
1401 u32 reg;
1402
1403 if (hba->errors & INT_FATAL_ERRORS)
1404 goto fatal_eh;
1405
1406 if (hba->errors & UIC_ERROR) {
1407
1408 reg = readl(hba->mmio_base +
1409 REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER);
1410 if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT)
1411 goto fatal_eh;
1412 }
1413 return;
1414fatal_eh:
1415 hba->ufshcd_state = UFSHCD_STATE_ERROR;
1416 schedule_work(&hba->feh_workq);
1417}
1418
1419/**
1420 * ufshcd_tmc_handler - handle task management function completion
1421 * @hba: per adapter instance
1422 */
1423static void ufshcd_tmc_handler(struct ufs_hba *hba)
1424{
1425 u32 tm_doorbell;
1426
1427 tm_doorbell = readl(hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL);
1428 hba->tm_condition = tm_doorbell ^ hba->outstanding_tasks;
1429 wake_up_interruptible(&hba->ufshcd_tm_wait_queue);
1430}
1431
1432/**
1433 * ufshcd_sl_intr - Interrupt service routine
1434 * @hba: per adapter instance
1435 * @intr_status: contains interrupts generated by the controller
1436 */
1437static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
1438{
1439 hba->errors = UFSHCD_ERROR_MASK & intr_status;
1440 if (hba->errors)
1441 ufshcd_err_handler(hba);
1442
1443 if (intr_status & UIC_COMMAND_COMPL)
1444 schedule_work(&hba->uic_workq);
1445
1446 if (intr_status & UTP_TASK_REQ_COMPL)
1447 ufshcd_tmc_handler(hba);
1448
1449 if (intr_status & UTP_TRANSFER_REQ_COMPL)
1450 ufshcd_transfer_req_compl(hba);
1451}
1452
1453/**
1454 * ufshcd_intr - Main interrupt service routine
1455 * @irq: irq number
1456 * @__hba: pointer to adapter instance
1457 *
1458 * Returns IRQ_HANDLED - If interrupt is valid
1459 * IRQ_NONE - If invalid interrupt
1460 */
1461static irqreturn_t ufshcd_intr(int irq, void *__hba)
1462{
1463 u32 intr_status;
1464 irqreturn_t retval = IRQ_NONE;
1465 struct ufs_hba *hba = __hba;
1466
1467 spin_lock(hba->host->host_lock);
1468 intr_status = readl(hba->mmio_base + REG_INTERRUPT_STATUS);
1469
1470 if (intr_status) {
1471 ufshcd_sl_intr(hba, intr_status);
1472
1473 /* If UFSHCI 1.0 then clear interrupt status register */
1474 if (hba->ufs_version == UFSHCI_VERSION_10)
1475 writel(intr_status,
1476 (hba->mmio_base + REG_INTERRUPT_STATUS));
1477 retval = IRQ_HANDLED;
1478 }
1479 spin_unlock(hba->host->host_lock);
1480 return retval;
1481}
1482
1483/**
1484 * ufshcd_issue_tm_cmd - issues task management commands to controller
1485 * @hba: per adapter instance
1486 * @lrbp: pointer to local reference block
1487 *
1488 * Returns SUCCESS/FAILED
1489 */
1490static int
1491ufshcd_issue_tm_cmd(struct ufs_hba *hba,
1492 struct ufshcd_lrb *lrbp,
1493 u8 tm_function)
1494{
1495 struct utp_task_req_desc *task_req_descp;
1496 struct utp_upiu_task_req *task_req_upiup;
1497 struct Scsi_Host *host;
1498 unsigned long flags;
1499 int free_slot = 0;
1500 int err;
1501
1502 host = hba->host;
1503
1504 spin_lock_irqsave(host->host_lock, flags);
1505
1506 /* If task management queue is full */
1507 free_slot = ufshcd_get_tm_free_slot(hba);
1508 if (free_slot >= hba->nutmrs) {
1509 spin_unlock_irqrestore(host->host_lock, flags);
1510 dev_err(&hba->pdev->dev, "Task management queue full\n");
1511 err = FAILED;
1512 goto out;
1513 }
1514
1515 task_req_descp = hba->utmrdl_base_addr;
1516 task_req_descp += free_slot;
1517
1518 /* Configure task request descriptor */
1519 task_req_descp->header.dword_0 = cpu_to_le32(UTP_REQ_DESC_INT_CMD);
1520 task_req_descp->header.dword_2 =
1521 cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
1522
1523 /* Configure task request UPIU */
1524 task_req_upiup =
1525 (struct utp_upiu_task_req *) task_req_descp->task_req_upiu;
1526 task_req_upiup->header.dword_0 =
1527 cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_TASK_REQ, 0,
1528 lrbp->lun, lrbp->task_tag));
1529 task_req_upiup->header.dword_1 =
1530 cpu_to_be32(UPIU_HEADER_DWORD(0, tm_function, 0, 0));
1531
1532 task_req_upiup->input_param1 = lrbp->lun;
1533 task_req_upiup->input_param1 =
1534 cpu_to_be32(task_req_upiup->input_param1);
1535 task_req_upiup->input_param2 = lrbp->task_tag;
1536 task_req_upiup->input_param2 =
1537 cpu_to_be32(task_req_upiup->input_param2);
1538
1539 /* send command to the controller */
1540 __set_bit(free_slot, &hba->outstanding_tasks);
1541 writel((1 << free_slot),
1542 (hba->mmio_base + REG_UTP_TASK_REQ_DOOR_BELL));
1543
1544 spin_unlock_irqrestore(host->host_lock, flags);
1545
1546 /* wait until the task management command is completed */
1547 err =
1548 wait_event_interruptible_timeout(hba->ufshcd_tm_wait_queue,
1549 (test_bit(free_slot,
1550 &hba->tm_condition) != 0),
1551 60 * HZ);
1552 if (!err) {
1553 dev_err(&hba->pdev->dev,
1554 "Task management command timed-out\n");
1555 err = FAILED;
1556 goto out;
1557 }
1558 clear_bit(free_slot, &hba->tm_condition);
1559 return ufshcd_task_req_compl(hba, free_slot);
1560out:
1561 return err;
1562}
1563
1564/**
1565 * ufshcd_device_reset - reset device and abort all the pending commands
1566 * @cmd: SCSI command pointer
1567 *
1568 * Returns SUCCESS/FAILED
1569 */
1570static int ufshcd_device_reset(struct scsi_cmnd *cmd)
1571{
1572 struct Scsi_Host *host;
1573 struct ufs_hba *hba;
1574 unsigned int tag;
1575 u32 pos;
1576 int err;
1577
1578 host = cmd->device->host;
1579 hba = shost_priv(host);
1580 tag = cmd->request->tag;
1581
1582 err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_LOGICAL_RESET);
1583 if (err)
1584 goto out;
1585
1586 for (pos = 0; pos < hba->nutrs; pos++) {
1587 if (test_bit(pos, &hba->outstanding_reqs) &&
1588 (hba->lrb[tag].lun == hba->lrb[pos].lun)) {
1589
1590 /* clear the respective UTRLCLR register bit */
1591 ufshcd_utrl_clear(hba, pos);
1592
1593 clear_bit(pos, &hba->outstanding_reqs);
1594
1595 if (hba->lrb[pos].cmd) {
1596 scsi_dma_unmap(hba->lrb[pos].cmd);
1597 hba->lrb[pos].cmd->result =
1598 DID_ABORT << 16;
1599 hba->lrb[pos].cmd->scsi_done(cmd);
1600 hba->lrb[pos].cmd = NULL;
1601 }
1602 }
1603 } /* end of for */
1604out:
1605 return err;
1606}
1607
1608/**
1609 * ufshcd_host_reset - Main reset function registered with scsi layer
1610 * @cmd: SCSI command pointer
1611 *
1612 * Returns SUCCESS/FAILED
1613 */
1614static int ufshcd_host_reset(struct scsi_cmnd *cmd)
1615{
1616 struct ufs_hba *hba;
1617
1618 hba = shost_priv(cmd->device->host);
1619
1620 if (hba->ufshcd_state == UFSHCD_STATE_RESET)
1621 return SUCCESS;
1622
1623 return (ufshcd_do_reset(hba) == SUCCESS) ? SUCCESS : FAILED;
1624}
1625
1626/**
1627 * ufshcd_abort - abort a specific command
1628 * @cmd: SCSI command pointer
1629 *
1630 * Returns SUCCESS/FAILED
1631 */
1632static int ufshcd_abort(struct scsi_cmnd *cmd)
1633{
1634 struct Scsi_Host *host;
1635 struct ufs_hba *hba;
1636 unsigned long flags;
1637 unsigned int tag;
1638 int err;
1639
1640 host = cmd->device->host;
1641 hba = shost_priv(host);
1642 tag = cmd->request->tag;
1643
1644 spin_lock_irqsave(host->host_lock, flags);
1645
1646 /* check if command is still pending */
1647 if (!(test_bit(tag, &hba->outstanding_reqs))) {
1648 err = FAILED;
1649 spin_unlock_irqrestore(host->host_lock, flags);
1650 goto out;
1651 }
1652 spin_unlock_irqrestore(host->host_lock, flags);
1653
1654 err = ufshcd_issue_tm_cmd(hba, &hba->lrb[tag], UFS_ABORT_TASK);
1655 if (err)
1656 goto out;
1657
1658 scsi_dma_unmap(cmd);
1659
1660 spin_lock_irqsave(host->host_lock, flags);
1661
1662 /* clear the respective UTRLCLR register bit */
1663 ufshcd_utrl_clear(hba, tag);
1664
1665 __clear_bit(tag, &hba->outstanding_reqs);
1666 hba->lrb[tag].cmd = NULL;
1667 spin_unlock_irqrestore(host->host_lock, flags);
1668out:
1669 return err;
1670}
1671
1672static struct scsi_host_template ufshcd_driver_template = {
1673 .module = THIS_MODULE,
1674 .name = UFSHCD,
1675 .proc_name = UFSHCD,
1676 .queuecommand = ufshcd_queuecommand,
1677 .slave_alloc = ufshcd_slave_alloc,
1678 .slave_destroy = ufshcd_slave_destroy,
1679 .eh_abort_handler = ufshcd_abort,
1680 .eh_device_reset_handler = ufshcd_device_reset,
1681 .eh_host_reset_handler = ufshcd_host_reset,
1682 .this_id = -1,
1683 .sg_tablesize = SG_ALL,
1684 .cmd_per_lun = UFSHCD_CMD_PER_LUN,
1685 .can_queue = UFSHCD_CAN_QUEUE,
1686};
1687
1688/**
1689 * ufshcd_shutdown - main function to put the controller in reset state
1690 * @pdev: pointer to PCI device handle
1691 */
1692static void ufshcd_shutdown(struct pci_dev *pdev)
1693{
1694 ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev));
1695}
1696
1697#ifdef CONFIG_PM
1698/**
1699 * ufshcd_suspend - suspend power management function
1700 * @pdev: pointer to PCI device handle
1701 * @state: power state
1702 *
1703 * Returns -ENOSYS
1704 */
1705static int ufshcd_suspend(struct pci_dev *pdev, pm_message_t state)
1706{
1707 /*
1708 * TODO:
1709 * 1. Block SCSI requests from SCSI midlayer
1710 * 2. Change the internal driver state to non operational
1711 * 3. Set UTRLRSR and UTMRLRSR bits to zero
1712 * 4. Wait until outstanding commands are completed
1713 * 5. Set HCE to zero to send the UFS host controller to reset state
1714 */
1715
1716 return -ENOSYS;
1717}
1718
1719/**
1720 * ufshcd_resume - resume power management function
1721 * @pdev: pointer to PCI device handle
1722 *
1723 * Returns -ENOSYS
1724 */
1725static int ufshcd_resume(struct pci_dev *pdev)
1726{
1727 /*
1728 * TODO:
1729 * 1. Set HCE to 1, to start the UFS host controller
1730 * initialization process
1731 * 2. Set UTRLRSR and UTMRLRSR bits to 1
1732 * 3. Change the internal driver state to operational
1733 * 4. Unblock SCSI requests from SCSI midlayer
1734 */
1735
1736 return -ENOSYS;
1737}
1738#endif /* CONFIG_PM */
1739
1740/**
1741 * ufshcd_hba_free - free allocated memory for
1742 * host memory space data structures
1743 * @hba: per adapter instance
1744 */
1745static void ufshcd_hba_free(struct ufs_hba *hba)
1746{
1747 iounmap(hba->mmio_base);
1748 ufshcd_free_hba_memory(hba);
1749 pci_release_regions(hba->pdev);
1750}
1751
1752/**
1753 * ufshcd_remove - de-allocate PCI/SCSI host and host memory space
1754 * data structure memory
1755 * @pdev - pointer to PCI handle
1756 */
1757static void ufshcd_remove(struct pci_dev *pdev)
1758{
1759 struct ufs_hba *hba = pci_get_drvdata(pdev);
1760
1761 /* disable interrupts */
1762 ufshcd_int_config(hba, UFSHCD_INT_DISABLE);
1763 free_irq(pdev->irq, hba);
1764
1765 ufshcd_hba_stop(hba);
1766 ufshcd_hba_free(hba);
1767
1768 scsi_remove_host(hba->host);
1769 scsi_host_put(hba->host);
1770 pci_set_drvdata(pdev, NULL);
1771 pci_clear_master(pdev);
1772 pci_disable_device(pdev);
1773}
1774
1775/**
1776 * ufshcd_set_dma_mask - Set dma mask based on the controller
1777 * addressing capability
1778 * @pdev: PCI device structure
1779 *
1780 * Returns 0 for success, non-zero for failure
1781 */
1782static int ufshcd_set_dma_mask(struct ufs_hba *hba)
1783{
1784 int err;
1785 u64 dma_mask;
1786
1787 /*
1788 * If controller supports 64 bit addressing mode, then set the DMA
1789 * mask to 64-bit, else set the DMA mask to 32-bit
1790 */
1791 if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT)
1792 dma_mask = DMA_BIT_MASK(64);
1793 else
1794 dma_mask = DMA_BIT_MASK(32);
1795
1796 err = pci_set_dma_mask(hba->pdev, dma_mask);
1797 if (err)
1798 return err;
1799
1800 err = pci_set_consistent_dma_mask(hba->pdev, dma_mask);
1801
1802 return err;
1803}
1804
1805/**
1806 * ufshcd_probe - probe routine of the driver
1807 * @pdev: pointer to PCI device handle
1808 * @id: PCI device id
1809 *
1810 * Returns 0 on success, non-zero value on failure
1811 */
1812static int __devinit
1813ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id)
1814{
1815 struct Scsi_Host *host;
1816 struct ufs_hba *hba;
1817 int err;
1818
1819 err = pci_enable_device(pdev);
1820 if (err) {
1821 dev_err(&pdev->dev, "pci_enable_device failed\n");
1822 goto out_error;
1823 }
1824
1825 pci_set_master(pdev);
1826
1827 host = scsi_host_alloc(&ufshcd_driver_template,
1828 sizeof(struct ufs_hba));
1829 if (!host) {
1830 dev_err(&pdev->dev, "scsi_host_alloc failed\n");
1831 err = -ENOMEM;
1832 goto out_disable;
1833 }
1834 hba = shost_priv(host);
1835
1836 err = pci_request_regions(pdev, UFSHCD);
1837 if (err < 0) {
1838 dev_err(&pdev->dev, "request regions failed\n");
1839 goto out_disable;
1840 }
1841
1842 hba->mmio_base = pci_ioremap_bar(pdev, 0);
1843 if (!hba->mmio_base) {
1844 dev_err(&pdev->dev, "memory map failed\n");
1845 err = -ENOMEM;
1846 goto out_release_regions;
1847 }
1848
1849 hba->host = host;
1850 hba->pdev = pdev;
1851
1852 /* Read capabilities registers */
1853 ufshcd_hba_capabilities(hba);
1854
1855 /* Get UFS version supported by the controller */
1856 hba->ufs_version = ufshcd_get_ufs_version(hba);
1857
1858 err = ufshcd_set_dma_mask(hba);
1859 if (err) {
1860 dev_err(&pdev->dev, "set dma mask failed\n");
1861 goto out_iounmap;
1862 }
1863
1864 /* Allocate memory for host memory space */
1865 err = ufshcd_memory_alloc(hba);
1866 if (err) {
1867 dev_err(&pdev->dev, "Memory allocation failed\n");
1868 goto out_iounmap;
1869 }
1870
1871 /* Configure LRB */
1872 ufshcd_host_memory_configure(hba);
1873
1874 host->can_queue = hba->nutrs;
1875 host->cmd_per_lun = hba->nutrs;
1876 host->max_id = UFSHCD_MAX_ID;
1877 host->max_lun = UFSHCD_MAX_LUNS;
1878 host->max_channel = UFSHCD_MAX_CHANNEL;
1879 host->unique_id = host->host_no;
1880 host->max_cmd_len = MAX_CDB_SIZE;
1881
1882 /* Initailize wait queue for task management */
1883 init_waitqueue_head(&hba->ufshcd_tm_wait_queue);
1884
1885 /* Initialize work queues */
1886 INIT_WORK(&hba->uic_workq, ufshcd_uic_cc_handler);
1887 INIT_WORK(&hba->feh_workq, ufshcd_fatal_err_handler);
1888
1889 /* IRQ registration */
1890 err = request_irq(pdev->irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);
1891 if (err) {
1892 dev_err(&pdev->dev, "request irq failed\n");
1893 goto out_lrb_free;
1894 }
1895
1896 /* Enable SCSI tag mapping */
1897 err = scsi_init_shared_tag_map(host, host->can_queue);
1898 if (err) {
1899 dev_err(&pdev->dev, "init shared queue failed\n");
1900 goto out_free_irq;
1901 }
1902
1903 pci_set_drvdata(pdev, hba);
1904
1905 err = scsi_add_host(host, &pdev->dev);
1906 if (err) {
1907 dev_err(&pdev->dev, "scsi_add_host failed\n");
1908 goto out_free_irq;
1909 }
1910
1911 /* Initialization routine */
1912 err = ufshcd_initialize_hba(hba);
1913 if (err) {
1914 dev_err(&pdev->dev, "Initialization failed\n");
1915 goto out_free_irq;
1916 }
1917
1918 return 0;
1919
1920out_free_irq:
1921 free_irq(pdev->irq, hba);
1922out_lrb_free:
1923 ufshcd_free_hba_memory(hba);
1924out_iounmap:
1925 iounmap(hba->mmio_base);
1926out_release_regions:
1927 pci_release_regions(pdev);
1928out_disable:
1929 scsi_host_put(host);
1930 pci_clear_master(pdev);
1931 pci_disable_device(pdev);
1932out_error:
1933 return err;
1934}
1935
1936static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = {
1937 { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1938 { } /* terminate list */
1939};
1940
1941MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl);
1942
1943static struct pci_driver ufshcd_pci_driver = {
1944 .name = UFSHCD,
1945 .id_table = ufshcd_pci_tbl,
1946 .probe = ufshcd_probe,
1947 .remove = __devexit_p(ufshcd_remove),
1948 .shutdown = ufshcd_shutdown,
1949#ifdef CONFIG_PM
1950 .suspend = ufshcd_suspend,
1951 .resume = ufshcd_resume,
1952#endif
1953};
1954
1955/**
1956 * ufshcd_init - Driver registration routine
1957 */
1958static int __init ufshcd_init(void)
1959{
1960 return pci_register_driver(&ufshcd_pci_driver);
1961}
1962module_init(ufshcd_init);
1963
1964/**
1965 * ufshcd_exit - Driver exit clean-up routine
1966 */
1967static void __exit ufshcd_exit(void)
1968{
1969 pci_unregister_driver(&ufshcd_pci_driver);
1970}
1971module_exit(ufshcd_exit);
1972
1973
1974MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>, "
1975 "Vinayak Holikatti <h.vinayak@samsung.com>");
1976MODULE_DESCRIPTION("Generic UFS host controller driver");
1977MODULE_LICENSE("GPL");
1978MODULE_VERSION(UFSHCD_DRIVER_VERSION);
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
new file mode 100644
index 000000000000..6e3510f71167
--- /dev/null
+++ b/drivers/scsi/ufs/ufshci.h
@@ -0,0 +1,376 @@
1/*
2 * Universal Flash Storage Host controller driver
3 *
4 * This code is based on drivers/scsi/ufs/ufshci.h
5 * Copyright (C) 2011-2012 Samsung India Software Operations
6 *
7 * Santosh Yaraganavi <santosh.sy@samsung.com>
8 * Vinayak Holikatti <h.vinayak@samsung.com>
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version 2
13 * of the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * NO WARRANTY
21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25 * solely responsible for determining the appropriateness of using and
26 * distributing the Program and assumes all risks associated with its
27 * exercise of rights under this Agreement, including but not limited to
28 * the risks and costs of program errors, damage to or loss of data,
29 * programs or equipment, and unavailability or interruption of operations.
30
31 * DISCLAIMER OF LIABILITY
32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39
40 * You should have received a copy of the GNU General Public License
41 * along with this program; if not, write to the Free Software
42 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
43 * USA.
44 */
45
46#ifndef _UFSHCI_H
47#define _UFSHCI_H
48
49enum {
50 TASK_REQ_UPIU_SIZE_DWORDS = 8,
51 TASK_RSP_UPIU_SIZE_DWORDS = 8,
52 ALIGNED_UPIU_SIZE = 128,
53};
54
55/* UFSHCI Registers */
56enum {
57 REG_CONTROLLER_CAPABILITIES = 0x00,
58 REG_UFS_VERSION = 0x08,
59 REG_CONTROLLER_DEV_ID = 0x10,
60 REG_CONTROLLER_PROD_ID = 0x14,
61 REG_INTERRUPT_STATUS = 0x20,
62 REG_INTERRUPT_ENABLE = 0x24,
63 REG_CONTROLLER_STATUS = 0x30,
64 REG_CONTROLLER_ENABLE = 0x34,
65 REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38,
66 REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C,
67 REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40,
68 REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44,
69 REG_UIC_ERROR_CODE_DME = 0x48,
70 REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C,
71 REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50,
72 REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54,
73 REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58,
74 REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C,
75 REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60,
76 REG_UTP_TASK_REQ_LIST_BASE_L = 0x70,
77 REG_UTP_TASK_REQ_LIST_BASE_H = 0x74,
78 REG_UTP_TASK_REQ_DOOR_BELL = 0x78,
79 REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C,
80 REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80,
81 REG_UIC_COMMAND = 0x90,
82 REG_UIC_COMMAND_ARG_1 = 0x94,
83 REG_UIC_COMMAND_ARG_2 = 0x98,
84 REG_UIC_COMMAND_ARG_3 = 0x9C,
85};
86
87/* Controller capability masks */
88enum {
89 MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
90 MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
91 MASK_64_ADDRESSING_SUPPORT = 0x01000000,
92 MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
93 MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000,
94};
95
96/* UFS Version 08h */
97#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0)
98#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16)
99
100/* Controller UFSHCI version */
101enum {
102 UFSHCI_VERSION_10 = 0x00010000,
103 UFSHCI_VERSION_11 = 0x00010100,
104};
105
106/*
107 * HCDDID - Host Controller Identification Descriptor
108 * - Device ID and Device Class 10h
109 */
110#define DEVICE_CLASS UFS_MASK(0xFFFF, 0)
111#define DEVICE_ID UFS_MASK(0xFF, 24)
112
113/*
114 * HCPMID - Host Controller Identification Descriptor
115 * - Product/Manufacturer ID 14h
116 */
117#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0)
118#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16)
119
120#define UFS_BIT(x) (1L << (x))
121
122#define UTP_TRANSFER_REQ_COMPL UFS_BIT(0)
123#define UIC_DME_END_PT_RESET UFS_BIT(1)
124#define UIC_ERROR UFS_BIT(2)
125#define UIC_TEST_MODE UFS_BIT(3)
126#define UIC_POWER_MODE UFS_BIT(4)
127#define UIC_HIBERNATE_EXIT UFS_BIT(5)
128#define UIC_HIBERNATE_ENTER UFS_BIT(6)
129#define UIC_LINK_LOST UFS_BIT(7)
130#define UIC_LINK_STARTUP UFS_BIT(8)
131#define UTP_TASK_REQ_COMPL UFS_BIT(9)
132#define UIC_COMMAND_COMPL UFS_BIT(10)
133#define DEVICE_FATAL_ERROR UFS_BIT(11)
134#define CONTROLLER_FATAL_ERROR UFS_BIT(16)
135#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17)
136
137#define UFSHCD_ERROR_MASK (UIC_ERROR |\
138 DEVICE_FATAL_ERROR |\
139 CONTROLLER_FATAL_ERROR |\
140 SYSTEM_BUS_FATAL_ERROR)
141
142#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\
143 CONTROLLER_FATAL_ERROR |\
144 SYSTEM_BUS_FATAL_ERROR)
145
146/* HCS - Host Controller Status 30h */
147#define DEVICE_PRESENT UFS_BIT(0)
148#define UTP_TRANSFER_REQ_LIST_READY UFS_BIT(1)
149#define UTP_TASK_REQ_LIST_READY UFS_BIT(2)
150#define UIC_COMMAND_READY UFS_BIT(3)
151#define HOST_ERROR_INDICATOR UFS_BIT(4)
152#define DEVICE_ERROR_INDICATOR UFS_BIT(5)
153#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
154
155/* HCE - Host Controller Enable 34h */
156#define CONTROLLER_ENABLE UFS_BIT(0)
157#define CONTROLLER_DISABLE 0x0
158
159/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
160#define UIC_PHY_ADAPTER_LAYER_ERROR UFS_BIT(31)
161#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
162
163/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
164#define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31)
165#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF
166#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
167
168/* UECN - Host UIC Error Code Network Layer 40h */
169#define UIC_NETWORK_LAYER_ERROR UFS_BIT(31)
170#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
171
172/* UECT - Host UIC Error Code Transport Layer 44h */
173#define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31)
174#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
175
176/* UECDME - Host UIC Error Code DME 48h */
177#define UIC_DME_ERROR UFS_BIT(31)
178#define UIC_DME_ERROR_CODE_MASK 0x1
179
180#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF
181#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8)
182#define INT_AGGR_COUNTER_AND_TIMER_RESET UFS_BIT(16)
183#define INT_AGGR_STATUS_BIT UFS_BIT(20)
184#define INT_AGGR_PARAM_WRITE UFS_BIT(24)
185#define INT_AGGR_ENABLE UFS_BIT(31)
186
187/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
188#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
189
190/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
191#define UTP_TASK_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
192
193/* UICCMD - UIC Command */
194#define COMMAND_OPCODE_MASK 0xFF
195#define GEN_SELECTOR_INDEX_MASK 0xFFFF
196
197#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16)
198#define RESET_LEVEL 0xFF
199
200#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16)
201#define CONFIG_RESULT_CODE_MASK 0xFF
202#define GENERIC_ERROR_CODE_MASK 0xFF
203
204/* UIC Commands */
205enum {
206 UIC_CMD_DME_GET = 0x01,
207 UIC_CMD_DME_SET = 0x02,
208 UIC_CMD_DME_PEER_GET = 0x03,
209 UIC_CMD_DME_PEER_SET = 0x04,
210 UIC_CMD_DME_POWERON = 0x10,
211 UIC_CMD_DME_POWEROFF = 0x11,
212 UIC_CMD_DME_ENABLE = 0x12,
213 UIC_CMD_DME_RESET = 0x14,
214 UIC_CMD_DME_END_PT_RST = 0x15,
215 UIC_CMD_DME_LINK_STARTUP = 0x16,
216 UIC_CMD_DME_HIBER_ENTER = 0x17,
217 UIC_CMD_DME_HIBER_EXIT = 0x18,
218 UIC_CMD_DME_TEST_MODE = 0x1A,
219};
220
221/* UIC Config result code / Generic error code */
222enum {
223 UIC_CMD_RESULT_SUCCESS = 0x00,
224 UIC_CMD_RESULT_INVALID_ATTR = 0x01,
225 UIC_CMD_RESULT_FAILURE = 0x01,
226 UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02,
227 UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03,
228 UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04,
229 UIC_CMD_RESULT_BAD_INDEX = 0x05,
230 UIC_CMD_RESULT_LOCKED_ATTR = 0x06,
231 UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07,
232 UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08,
233 UIC_CMD_RESULT_BUSY = 0x09,
234 UIC_CMD_RESULT_DME_FAILURE = 0x0A,
235};
236
237#define MASK_UIC_COMMAND_RESULT 0xFF
238
239#define INT_AGGR_COUNTER_THRESHOLD_VALUE (0x1F << 8)
240#define INT_AGGR_TIMEOUT_VALUE (0x02)
241
242/* Interrupt disable masks */
243enum {
244 /* Interrupt disable mask for UFSHCI v1.0 */
245 INTERRUPT_DISABLE_MASK_10 = 0xFFFF,
246
247 /* Interrupt disable mask for UFSHCI v1.1 */
248 INTERRUPT_DISABLE_MASK_11 = 0x0,
249};
250
251/*
252 * Request Descriptor Definitions
253 */
254
255/* Transfer request command type */
256enum {
257 UTP_CMD_TYPE_SCSI = 0x0,
258 UTP_CMD_TYPE_UFS = 0x1,
259 UTP_CMD_TYPE_DEV_MANAGE = 0x2,
260};
261
262enum {
263 UTP_SCSI_COMMAND = 0x00000000,
264 UTP_NATIVE_UFS_COMMAND = 0x10000000,
265 UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000,
266 UTP_REQ_DESC_INT_CMD = 0x01000000,
267};
268
269/* UTP Transfer Request Data Direction (DD) */
270enum {
271 UTP_NO_DATA_TRANSFER = 0x00000000,
272 UTP_HOST_TO_DEVICE = 0x02000000,
273 UTP_DEVICE_TO_HOST = 0x04000000,
274};
275
276/* Overall command status values */
277enum {
278 OCS_SUCCESS = 0x0,
279 OCS_INVALID_CMD_TABLE_ATTR = 0x1,
280 OCS_INVALID_PRDT_ATTR = 0x2,
281 OCS_MISMATCH_DATA_BUF_SIZE = 0x3,
282 OCS_MISMATCH_RESP_UPIU_SIZE = 0x4,
283 OCS_PEER_COMM_FAILURE = 0x5,
284 OCS_ABORTED = 0x6,
285 OCS_FATAL_ERROR = 0x7,
286 OCS_INVALID_COMMAND_STATUS = 0x0F,
287 MASK_OCS = 0x0F,
288};
289
290/**
291 * struct ufshcd_sg_entry - UFSHCI PRD Entry
292 * @base_addr: Lower 32bit physical address DW-0
293 * @upper_addr: Upper 32bit physical address DW-1
294 * @reserved: Reserved for future use DW-2
295 * @size: size of physical segment DW-3
296 */
297struct ufshcd_sg_entry {
298 u32 base_addr;
299 u32 upper_addr;
300 u32 reserved;
301 u32 size;
302};
303
304/**
305 * struct utp_transfer_cmd_desc - UFS Command Descriptor structure
306 * @command_upiu: Command UPIU Frame address
307 * @response_upiu: Response UPIU Frame address
308 * @prd_table: Physical Region Descriptor
309 */
310struct utp_transfer_cmd_desc {
311 u8 command_upiu[ALIGNED_UPIU_SIZE];
312 u8 response_upiu[ALIGNED_UPIU_SIZE];
313 struct ufshcd_sg_entry prd_table[SG_ALL];
314};
315
316/**
317 * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
318 * @dword0: Descriptor Header DW0
319 * @dword1: Descriptor Header DW1
320 * @dword2: Descriptor Header DW2
321 * @dword3: Descriptor Header DW3
322 */
323struct request_desc_header {
324 u32 dword_0;
325 u32 dword_1;
326 u32 dword_2;
327 u32 dword_3;
328};
329
330/**
331 * struct utp_transfer_req_desc - UTRD structure
332 * @header: UTRD header DW-0 to DW-3
333 * @command_desc_base_addr_lo: UCD base address low DW-4
334 * @command_desc_base_addr_hi: UCD base address high DW-5
335 * @response_upiu_length: response UPIU length DW-6
336 * @response_upiu_offset: response UPIU offset DW-6
337 * @prd_table_length: Physical region descriptor length DW-7
338 * @prd_table_offset: Physical region descriptor offset DW-7
339 */
340struct utp_transfer_req_desc {
341
342 /* DW 0-3 */
343 struct request_desc_header header;
344
345 /* DW 4-5*/
346 u32 command_desc_base_addr_lo;
347 u32 command_desc_base_addr_hi;
348
349 /* DW 6 */
350 u16 response_upiu_length;
351 u16 response_upiu_offset;
352
353 /* DW 7 */
354 u16 prd_table_length;
355 u16 prd_table_offset;
356};
357
358/**
359 * struct utp_task_req_desc - UTMRD structure
360 * @header: UTMRD header DW-0 to DW-3
361 * @task_req_upiu: Pointer to task request UPIU DW-4 to DW-11
362 * @task_rsp_upiu: Pointer to task response UPIU DW12 to DW-19
363 */
364struct utp_task_req_desc {
365
366 /* DW 0-3 */
367 struct request_desc_header header;
368
369 /* DW 4-11 */
370 u32 task_req_upiu[TASK_REQ_UPIU_SIZE_DWORDS];
371
372 /* DW 12-19 */
373 u32 task_rsp_upiu[TASK_RSP_UPIU_SIZE_DWORDS];
374};
375
376#endif /* End of Header */