[SCSI] mpt2sas: Added phy_enable and set_phy_speed sysfs callback support.

Added new callbacks phy_enable and set_phy_speed in the
mpt2sas_transport_functions template. This will allow end user to
enable/disable phys and change links rates using the SysFS interface.
Current implementation only supports direct attached phys, but we
could in the future add support for expander based phys.
A new subroutine mpt2sas_config_set_sas_iounit_pg1 was added;
this wrapper function used to send request to controller firmware to modify
the phys and link rates. A new subroutine _transport_find_local_phy was added;
a function for easly obtaining the local phy object for direct attached.

Example to disable a phy
echo 0 > /sys/class/phy3:0/enable

Example to enable the same phy
echo 1 > /sys/class/phy3:0/enable

Example to change the link rate to 1.5
#echo "1.5 Gbit" > /sys/class/phy3:0/maximum_linkrate
#cat /sys/class/phy3:0/negotiated_linkrate
1.5 Gbit

Example to change the link rate to 3.0
#echo "3.0 Gbit" > /sys/class/phy3:0/maximum_linkrate
#cat /sys/class/phy3:0/negotiated_linkrate
3.0 Gbit

Example to change the link rate to 6.0
#echo "6.0 Gbit" > /sys/class/phy3:0/maximum_linkrate
#cat /sys/class/phy3:0/negotiated_linkrate
6.0 Gbit

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Reviewed-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 182 insertions, 14 deletions

diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index 3a82872bad44..789f9ee7f001 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -855,6 +855,17 @@ rphy_to_ioc(struct sas_rphy *rphy)
         return shost_priv(shost);
 }
 
+static struct _sas_phy *
+_transport_find_local_phy(struct MPT2SAS_ADAPTER *ioc, struct sas_phy *phy)
+{
+        int i;
+
+        for (i = 0; i < ioc->sas_hba.num_phys; i++)
+                if (ioc->sas_hba.phy[i].phy == phy)
+                        return(&ioc->sas_hba.phy[i]);
+        return NULL;
+}
+
 /**
  * _transport_get_linkerrors -
  * @phy: The sas phy object
@@ -870,14 +881,8 @@ _transport_get_linkerrors(struct sas_phy *phy)
         struct _sas_phy *mpt2sas_phy;
         Mpi2ConfigReply_t mpi_reply;
         Mpi2SasPhyPage1_t phy_pg1;
-        int i;
 
-        for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys &&
-            !mpt2sas_phy; i++) {
-                if (ioc->sas_hba.phy[i].phy != phy)
-                        continue;
-                mpt2sas_phy = &ioc->sas_hba.phy[i];
-        }
+        mpt2sas_phy = _transport_find_local_phy(ioc, phy);
 
         if (!mpt2sas_phy) /* this phy not on sas_host */
                 return -EINVAL;
@@ -971,14 +976,8 @@ _transport_phy_reset(struct sas_phy *phy, int hard_reset)
         struct _sas_phy *mpt2sas_phy;
         Mpi2SasIoUnitControlReply_t mpi_reply;
         Mpi2SasIoUnitControlRequest_t mpi_request;
-        int i;
 
-        for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys &&
-            !mpt2sas_phy; i++) {
-                if (ioc->sas_hba.phy[i].phy != phy)
-                        continue;
-                mpt2sas_phy = &ioc->sas_hba.phy[i];
-        }
+        mpt2sas_phy = _transport_find_local_phy(ioc, phy);
 
         if (!mpt2sas_phy) /* this phy not on sas_host */
                 return -EINVAL;
@@ -1006,6 +1005,173 @@ _transport_phy_reset(struct sas_phy *phy, int hard_reset)
 }
 
 /**
+ * _transport_phy_enable - enable/disable phys
+ * @phy: The sas phy object
+ * @enable: enable phy when true
+ *
+ * Only support sas_host direct attached phys.
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_enable(struct sas_phy *phy, int enable)
+{
+        struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
+        struct _sas_phy *mpt2sas_phy;
+        Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+        Mpi2ConfigReply_t mpi_reply;
+        u16 ioc_status;
+        u16 sz;
+        int rc = 0;
+
+        mpt2sas_phy = _transport_find_local_phy(ioc, phy);
+
+        if (!mpt2sas_phy) /* this phy not on sas_host */
+                return -EINVAL;
+
+        /* sas_iounit page 1 */
+        sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+            sizeof(Mpi2SasIOUnit1PhyData_t));
+        sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+        if (!sas_iounit_pg1) {
+                printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+                    ioc->name, __FILE__, __LINE__, __func__);
+                rc = -ENOMEM;
+                goto out;
+        }
+        if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+            sas_iounit_pg1, sz))) {
+                printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+                    ioc->name, __FILE__, __LINE__, __func__);
+                rc = -ENXIO;
+                goto out;
+        }
+        ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+            MPI2_IOCSTATUS_MASK;
+        if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+                printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+                    ioc->name, __FILE__, __LINE__, __func__);
+                rc = -EIO;
+                goto out;
+        }
+
+        if (enable)
+                sas_iounit_pg1->PhyData[mpt2sas_phy->phy_id].PhyFlags
+                    &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
+        else
+                sas_iounit_pg1->PhyData[mpt2sas_phy->phy_id].PhyFlags
+                    |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
+
+        mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz);
+
+ out:
+        kfree(sas_iounit_pg1);
+        return rc;
+}
+
+/**
+ * _transport_phy_speed - set phy min/max link rates
+ * @phy: The sas phy object
+ * @rates: rates defined in sas_phy_linkrates
+ *
+ * Only support sas_host direct attached phys.
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
+{
+        struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
+        struct _sas_phy *mpt2sas_phy;
+        Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+        Mpi2SasPhyPage0_t phy_pg0;
+        Mpi2ConfigReply_t mpi_reply;
+        u16 ioc_status;
+        u16 sz;
+        int i;
+        int rc = 0;
+
+        mpt2sas_phy = _transport_find_local_phy(ioc, phy);
+
+        if (!mpt2sas_phy) /* this phy not on sas_host */
+                return -EINVAL;
+
+        if (!rates->minimum_linkrate)
+                rates->minimum_linkrate = phy->minimum_linkrate;
+        else if (rates->minimum_linkrate < phy->minimum_linkrate_hw)
+                rates->minimum_linkrate = phy->minimum_linkrate_hw;
+
+        if (!rates->maximum_linkrate)
+                rates->maximum_linkrate = phy->maximum_linkrate;
+        else if (rates->maximum_linkrate > phy->maximum_linkrate_hw)
+                rates->maximum_linkrate = phy->maximum_linkrate_hw;
+
+        /* sas_iounit page 1 */
+        sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+            sizeof(Mpi2SasIOUnit1PhyData_t));
+        sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+        if (!sas_iounit_pg1) {
+                printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+                    ioc->name, __FILE__, __LINE__, __func__);
+                rc = -ENOMEM;
+                goto out;
+        }
+        if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+            sas_iounit_pg1, sz))) {
+                printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+                    ioc->name, __FILE__, __LINE__, __func__);
+                rc = -ENXIO;
+                goto out;
+        }
+        ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+            MPI2_IOCSTATUS_MASK;
+        if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+                printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+                    ioc->name, __FILE__, __LINE__, __func__);
+                rc = -EIO;
+                goto out;
+        }
+
+        for (i = 0; i < ioc->sas_hba.num_phys; i++) {
+                if (mpt2sas_phy->phy_id != i) {
+                        sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
+                            (ioc->sas_hba.phy[i].phy->minimum_linkrate +
+                            (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4));
+                } else {
+                        sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
+                            (rates->minimum_linkrate +
+                            (rates->maximum_linkrate << 4));
+                }
+        }
+
+        if (mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
+            sz)) {
+                printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+                    ioc->name, __FILE__, __LINE__, __func__);
+                rc = -ENXIO;
+                goto out;
+        }
+
+        /* link reset */
+        _transport_phy_reset(phy, 0);
+
+        /* read phy page 0, then update the rates in the sas transport phy */
+        if (!mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
+            mpt2sas_phy->phy_id)) {
+                phy->minimum_linkrate = _transport_convert_phy_link_rate(
+                    phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
+                phy->maximum_linkrate = _transport_convert_phy_link_rate(
+                    phy_pg0.ProgrammedLinkRate >> 4);
+                phy->negotiated_linkrate = _transport_convert_phy_link_rate(
+                    phy_pg0.NegotiatedLinkRate &
+                    MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
+        }
+
+ out:
+        kfree(sas_iounit_pg1);
+        return rc;
+}
+
+
+/**
  * _transport_smp_handler - transport portal for smp passthru
  * @shost: shost object
  * @rphy: sas transport rphy object
@@ -1207,6 +1373,8 @@ struct sas_function_template mpt2sas_transport_functions = {
         .get_enclosure_identifier = _transport_get_enclosure_identifier,
         .get_bay_identifier     = _transport_get_bay_identifier,
         .phy_reset              = _transport_phy_reset,
+        .phy_enable             = _transport_phy_enable,
+        .set_phy_speed          = _transport_phy_speed,
         .smp_handler            = _transport_smp_handler,
 };