[SCSI] lpfc 8.1.12 : Add support for async scanning

Add support for async scanning

Notes: This is the async scan patch to our driver from Matthew Wilcox.
  The async scan logic is still subject to errors in insmod/rmmod, as
  the async scan threads don't get shutdown when the module unloads
  underneath them. See http://marc.info/?l=linux-scsi&m=117551999925582&w=2

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 155 insertions, 150 deletions

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 5e9a839111d2..7cb92c7531ba 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -418,33 +418,6 @@ lpfc_config_port_post(struct lpfc_hba * phba)
         return (0);
 }
 
-static int
-lpfc_discovery_wait(struct lpfc_hba *phba)
-{
-        int i = 0;
-
-        while ((phba->hba_state != LPFC_HBA_READY) ||
-               (phba->num_disc_nodes) || (phba->fc_prli_sent) ||
-               ((phba->fc_map_cnt == 0) && (i<2)) ||
-               (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)) {
-                /* Check every second for 30 retries. */
-                i++;
-                if (i > 30) {
-                        return -ETIMEDOUT;
-                }
-                if ((i >= 15) && (phba->hba_state <= LPFC_LINK_DOWN)) {
-                        /* The link is down.  Set linkdown timeout */
-                        return -ETIMEDOUT;
-                }
-
-                /* Delay for 1 second to give discovery time to complete. */
-                msleep(1000);
-
-        }
-
-        return 0;
-}
-
 /************************************************************************/
 /*                                                                      */
 /*    lpfc_hba_down_prep                                                */
@@ -1362,6 +1335,156 @@ lpfc_scsi_free(struct lpfc_hba * phba)
         return 0;
 }
 
+void lpfc_remove_device(struct lpfc_hba *phba)
+{
+        unsigned long iflag;
+
+        lpfc_free_sysfs_attr(phba);
+
+        spin_lock_irqsave(phba->host->host_lock, iflag);
+        phba->fc_flag |= FC_UNLOADING;
+
+        spin_unlock_irqrestore(phba->host->host_lock, iflag);
+
+        fc_remove_host(phba->host);
+        scsi_remove_host(phba->host);
+
+        kthread_stop(phba->worker_thread);
+
+        /*
+         * Bring down the SLI Layer. This step disable all interrupts,
+         * clears the rings, discards all mailbox commands, and resets
+         * the HBA.
+         */
+        lpfc_sli_hba_down(phba);
+        lpfc_sli_brdrestart(phba);
+
+        /* Release the irq reservation */
+        free_irq(phba->pcidev->irq, phba);
+        pci_disable_msi(phba->pcidev);
+
+        lpfc_cleanup(phba);
+        lpfc_stop_timer(phba);
+        phba->work_hba_events = 0;
+
+        /*
+         * Call scsi_free before mem_free since scsi bufs are released to their
+         * corresponding pools here.
+         */
+        lpfc_scsi_free(phba);
+        lpfc_mem_free(phba);
+
+        /* Free resources associated with SLI2 interface */
+        dma_free_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE,
+                          phba->slim2p, phba->slim2p_mapping);
+
+        /* unmap adapter SLIM and Control Registers */
+        iounmap(phba->ctrl_regs_memmap_p);
+        iounmap(phba->slim_memmap_p);
+
+        pci_release_regions(phba->pcidev);
+        pci_disable_device(phba->pcidev);
+
+        idr_remove(&lpfc_hba_index, phba->brd_no);
+        scsi_host_put(phba->host);
+}
+
+void lpfc_scan_start(struct Scsi_Host *host)
+{
+        struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+
+        if (lpfc_alloc_sysfs_attr(phba))
+                goto error;
+
+        phba->MBslimaddr = phba->slim_memmap_p;
+        phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
+        phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
+        phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
+        phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+
+        if (lpfc_sli_hba_setup(phba))
+                goto error;
+
+        /*
+         * hba setup may have changed the hba_queue_depth so we need to adjust
+         * the value of can_queue.
+         */
+        host->can_queue = phba->cfg_hba_queue_depth - 10;
+        return;
+
+error:
+        lpfc_remove_device(phba);
+}
+
+int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+        struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata;
+
+        if (!phba->host)
+                return 1;
+        if (time >= 30 * HZ)
+                goto finished;
+
+        if (phba->hba_state != LPFC_HBA_READY)
+                return 0;
+        if (phba->num_disc_nodes || phba->fc_prli_sent)
+                return 0;
+        if ((phba->fc_map_cnt == 0) && (time < 2 * HZ))
+                return 0;
+        if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)
+                return 0;
+        if ((phba->hba_state > LPFC_LINK_DOWN) || (time < 15 * HZ))
+                return 0;
+
+finished:
+        if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+                spin_lock_irq(shost->host_lock);
+                lpfc_poll_start_timer(phba);
+                spin_unlock_irq(shost->host_lock);
+        }
+
+        /*
+         * set fixed host attributes
+         * Must done after lpfc_sli_hba_setup()
+         */
+
+        fc_host_node_name(shost) = wwn_to_u64(phba->fc_nodename.u.wwn);
+        fc_host_port_name(shost) = wwn_to_u64(phba->fc_portname.u.wwn);
+        fc_host_supported_classes(shost) = FC_COS_CLASS3;
+
+        memset(fc_host_supported_fc4s(shost), 0,
+                sizeof(fc_host_supported_fc4s(shost)));
+        fc_host_supported_fc4s(shost)[2] = 1;
+        fc_host_supported_fc4s(shost)[7] = 1;
+
+        lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(shost));
+
+        fc_host_supported_speeds(shost) = 0;
+        if (phba->lmt & LMT_10Gb)
+                fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
+        if (phba->lmt & LMT_4Gb)
+                fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT;
+        if (phba->lmt & LMT_2Gb)
+                fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT;
+        if (phba->lmt & LMT_1Gb)
+                fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT;
+
+        fc_host_maxframe_size(shost) =
+                ((((uint32_t) phba->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
+                 (uint32_t) phba->fc_sparam.cmn.bbRcvSizeLsb);
+
+        /* This value is also unchanging */
+        memset(fc_host_active_fc4s(shost), 0,
+                sizeof(fc_host_active_fc4s(shost)));
+        fc_host_active_fc4s(shost)[2] = 1;
+        fc_host_active_fc4s(shost)[7] = 1;
+
+        spin_lock_irq(shost->host_lock);
+        phba->fc_flag &= ~FC_LOADING;
+        spin_unlock_irq(shost->host_lock);
+
+        return 1;
+}
 
 static int __devinit
 lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
@@ -1552,13 +1675,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 
         host->transportt = lpfc_transport_template;
         pci_set_drvdata(pdev, host);
-        error = scsi_add_host(host, &pdev->dev);
-        if (error)
-                goto out_kthread_stop;
-
-        error = lpfc_alloc_sysfs_attr(phba);
-        if (error)
-                goto out_remove_host;
 
         if (phba->cfg_use_msi) {
                 error = pci_enable_msi(phba->pcidev);
@@ -1574,73 +1690,15 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                         "%d:0451 Enable interrupt handler failed\n",
                         phba->brd_no);
-                goto out_free_sysfs_attr;
+                goto out_kthread_stop;
         }
-        phba->MBslimaddr = phba->slim_memmap_p;
-        phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
-        phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
-        phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
-        phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
 
-        error = lpfc_sli_hba_setup(phba);
-        if (error) {
-                error = -ENODEV;
+        error = scsi_add_host(host, &pdev->dev);
+        if (error)
                 goto out_free_irq;
-        }
-
-        /*
-         * hba setup may have changed the hba_queue_depth so we need to adjust
-         * the value of can_queue.
-         */
-        host->can_queue = phba->cfg_hba_queue_depth - 10;
-
-        lpfc_discovery_wait(phba);
-
-        if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
-                spin_lock_irq(phba->host->host_lock);
-                lpfc_poll_start_timer(phba);
-                spin_unlock_irq(phba->host->host_lock);
-        }
 
-        /*
-         * set fixed host attributes
-         * Must done after lpfc_sli_hba_setup()
-         */
-
-        fc_host_node_name(host) = wwn_to_u64(phba->fc_nodename.u.wwn);
-        fc_host_port_name(host) = wwn_to_u64(phba->fc_portname.u.wwn);
-        fc_host_supported_classes(host) = FC_COS_CLASS3;
-
-        memset(fc_host_supported_fc4s(host), 0,
-                sizeof(fc_host_supported_fc4s(host)));
-        fc_host_supported_fc4s(host)[2] = 1;
-        fc_host_supported_fc4s(host)[7] = 1;
-
-        lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(host));
-
-        fc_host_supported_speeds(host) = 0;
-        if (phba->lmt & LMT_10Gb)
-                fc_host_supported_speeds(host) |= FC_PORTSPEED_10GBIT;
-        if (phba->lmt & LMT_4Gb)
-                fc_host_supported_speeds(host) |= FC_PORTSPEED_4GBIT;
-        if (phba->lmt & LMT_2Gb)
-                fc_host_supported_speeds(host) |= FC_PORTSPEED_2GBIT;
-        if (phba->lmt & LMT_1Gb)
-                fc_host_supported_speeds(host) |= FC_PORTSPEED_1GBIT;
-
-        fc_host_maxframe_size(host) =
-                ((((uint32_t) phba->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
-                 (uint32_t) phba->fc_sparam.cmn.bbRcvSizeLsb);
-
-        /* This value is also unchanging */
-        memset(fc_host_active_fc4s(host), 0,
-                sizeof(fc_host_active_fc4s(host)));
-        fc_host_active_fc4s(host)[2] = 1;
-        fc_host_active_fc4s(host)[7] = 1;
+        scsi_scan_host(host);
 
-        spin_lock_irq(phba->host->host_lock);
-        phba->fc_flag &= ~FC_LOADING;
-        spin_unlock_irq(phba->host->host_lock);
         return 0;
 
 out_free_irq:
@@ -1648,11 +1706,6 @@ out_free_irq:
         phba->work_hba_events = 0;
         free_irq(phba->pcidev->irq, phba);
         pci_disable_msi(phba->pcidev);
-out_free_sysfs_attr:
-        lpfc_free_sysfs_attr(phba);
-out_remove_host:
-        fc_remove_host(phba->host);
-        scsi_remove_host(phba->host);
 out_kthread_stop:
         kthread_stop(phba->worker_thread);
 out_free_iocbq:
@@ -1690,56 +1743,8 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 {
         struct Scsi_Host   *host = pci_get_drvdata(pdev);
         struct lpfc_hba    *phba = (struct lpfc_hba *)host->hostdata;
-        unsigned long iflag;
-
-        lpfc_free_sysfs_attr(phba);
-
-        spin_lock_irqsave(phba->host->host_lock, iflag);
-        phba->fc_flag |= FC_UNLOADING;
-
-        spin_unlock_irqrestore(phba->host->host_lock, iflag);
-
-        fc_remove_host(phba->host);
-        scsi_remove_host(phba->host);
-
-        kthread_stop(phba->worker_thread);
-
-        /*
-         * Bring down the SLI Layer. This step disable all interrupts,
-         * clears the rings, discards all mailbox commands, and resets
-         * the HBA.
-         */
-        lpfc_sli_hba_down(phba);
-        lpfc_sli_brdrestart(phba);
 
-        /* Release the irq reservation */
-        free_irq(phba->pcidev->irq, phba);
-        pci_disable_msi(phba->pcidev);
-
-        lpfc_cleanup(phba);
-        lpfc_stop_timer(phba);
-        phba->work_hba_events = 0;
-
-        /*
-         * Call scsi_free before mem_free since scsi bufs are released to their
-         * corresponding pools here.
-         */
-        lpfc_scsi_free(phba);
-        lpfc_mem_free(phba);
-
-        /* Free resources associated with SLI2 interface */
-        dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
-                          phba->slim2p, phba->slim2p_mapping);
-
-        /* unmap adapter SLIM and Control Registers */
-        iounmap(phba->ctrl_regs_memmap_p);
-        iounmap(phba->slim_memmap_p);
-
-        pci_release_regions(phba->pcidev);
-        pci_disable_device(phba->pcidev);
-
-        idr_remove(&lpfc_hba_index, phba->brd_no);
-        scsi_host_put(phba->host);
+        lpfc_remove_device(phba);
 
         pci_set_drvdata(pdev, NULL);
 }