Merge tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:
 "Some nice cleanups like removing bootmem, and removal of
  __get_cpu_var().

  There is one patch to mm/gup.c.  This is the generic GUP
  implementation, but is only used by us and arm(64).  We have an ack
  from Steve Capper, and although we didn't get an ack from Andrew he
  told us to take the patch through the powerpc tree.

  There's one cxl patch.  This is in drivers/misc, but Greg said he was
  happy for us to manage fixes for it.

  There is an infrastructure patch to support an IPMI driver for OPAL.

  There is also an RTC driver for OPAL.  We weren't able to get any
  response from the RTC maintainer, Alessandro Zummo, so in the end we
  just merged the driver.

  The usual batch of Freescale updates from Scott"

* tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (101 commits)
  powerpc/powernv: Return to cpu offline loop when finished in KVM guest
  powerpc/book3s: Fix partial invalidation of TLBs in MCE code.
  powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault
  powerpc/xmon: Cleanup the breakpoint flags
  powerpc/xmon: Enable HW instruction breakpoint on POWER8
  powerpc/mm/thp: Use tlbiel if possible
  powerpc/mm/thp: Remove code duplication
  powerpc/mm/hugetlb: Sanity check gigantic hugepage count
  powerpc/oprofile: Disable pagefaults during user stack read
  powerpc/mm: Check for matching hpte without taking hpte lock
  powerpc: Drop useless warning in eeh_init()
  powerpc/powernv: Cleanup unused MCE definitions/declarations.
  powerpc/eeh: Dump PHB diag-data early
  powerpc/eeh: Recover EEH error on ownership change for BCM5719
  powerpc/eeh: Set EEH_PE_RESET on PE reset
  powerpc/eeh: Refactor eeh_reset_pe()
  powerpc: Remove more traces of bootmem
  powerpc/pseries: Initialise nvram_pstore_info's buf_lock
  cxl: Name interrupts in /proc/interrupt
  cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning
  ...

3 files changed, 273 insertions, 0 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4511ddc1ac31..f15cddfeb897 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -987,6 +987,17 @@ config RTC_DRV_NUC900
           If you say yes here you get support for the RTC subsystem of the
           NUC910/NUC920 used in embedded systems.
 
+config RTC_DRV_OPAL
+        tristate "IBM OPAL RTC driver"
+        depends on PPC_POWERNV
+        default y
+        help
+          If you say yes here you get support for the PowerNV platform RTC
+          driver based on OPAL interfaces.
+
+          This driver can also be built as a module. If so, the module
+          will be called rtc-opal.
+
 comment "on-CPU RTC drivers"
 
 config RTC_DRV_DAVINCI
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index b188323c096a..c8ef3e1e6ccd 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -92,6 +92,7 @@ obj-$(CONFIG_RTC_DRV_MSM6242)	+= rtc-msm6242.o
 obj-$(CONFIG_RTC_DRV_MPC5121)   += rtc-mpc5121.o
 obj-$(CONFIG_RTC_DRV_MV)        += rtc-mv.o
 obj-$(CONFIG_RTC_DRV_NUC900)    += rtc-nuc900.o
+obj-$(CONFIG_RTC_DRV_OPAL)      += rtc-opal.o
 obj-$(CONFIG_RTC_DRV_OMAP)      += rtc-omap.o
 obj-$(CONFIG_RTC_DRV_PALMAS)    += rtc-palmas.o
 obj-$(CONFIG_RTC_DRV_PCAP)      += rtc-pcap.o
diff --git a/drivers/rtc/rtc-opal.c b/drivers/rtc/rtc-opal.c
new file mode 100644
index 000000000000..95f652165fe9
--- /dev/null
+++ b/drivers/rtc/rtc-opal.c
@@ -0,0 +1,261 @@
+/*
+ * IBM OPAL RTC driver
+ * Copyright (C) 2014 IBM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ */
+
+#define DRVNAME         "rtc-opal"
+#define pr_fmt(fmt)     DRVNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/rtc.h>
+#include <linux/delay.h>
+#include <linux/bcd.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <asm/opal.h>
+#include <asm/firmware.h>
+
+static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm)
+{
+        tm->tm_year = ((bcd2bin(y_m_d >> 24) * 100) +
+                       bcd2bin((y_m_d >> 16) & 0xff)) - 1900;
+        tm->tm_mon  = bcd2bin((y_m_d >> 8) & 0xff) - 1;
+        tm->tm_mday = bcd2bin(y_m_d & 0xff);
+        tm->tm_hour = bcd2bin((h_m_s_ms >> 56) & 0xff);
+        tm->tm_min  = bcd2bin((h_m_s_ms >> 48) & 0xff);
+        tm->tm_sec  = bcd2bin((h_m_s_ms >> 40) & 0xff);
+
+        GregorianDay(tm);
+}
+
+static void tm_to_opal(struct rtc_time *tm, u32 *y_m_d, u64 *h_m_s_ms)
+{
+        *y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) / 100)) << 24;
+        *y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) % 100)) << 16;
+        *y_m_d |= ((u32)bin2bcd((tm->tm_mon + 1))) << 8;
+        *y_m_d |= ((u32)bin2bcd(tm->tm_mday));
+
+        *h_m_s_ms |= ((u64)bin2bcd(tm->tm_hour)) << 56;
+        *h_m_s_ms |= ((u64)bin2bcd(tm->tm_min)) << 48;
+        *h_m_s_ms |= ((u64)bin2bcd(tm->tm_sec)) << 40;
+}
+
+static int opal_get_rtc_time(struct device *dev, struct rtc_time *tm)
+{
+        long rc = OPAL_BUSY;
+        u32 y_m_d;
+        u64 h_m_s_ms;
+        __be32 __y_m_d;
+        __be64 __h_m_s_ms;
+
+        while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+                rc = opal_rtc_read(&__y_m_d, &__h_m_s_ms);
+                if (rc == OPAL_BUSY_EVENT)
+                        opal_poll_events(NULL);
+                else
+                        msleep(10);
+        }
+
+        if (rc != OPAL_SUCCESS)
+                return -EIO;
+
+        y_m_d = be32_to_cpu(__y_m_d);
+        h_m_s_ms = be64_to_cpu(__h_m_s_ms);
+        opal_to_tm(y_m_d, h_m_s_ms, tm);
+
+        return 0;
+}
+
+static int opal_set_rtc_time(struct device *dev, struct rtc_time *tm)
+{
+        long rc = OPAL_BUSY;
+        u32 y_m_d = 0;
+        u64 h_m_s_ms = 0;
+
+        tm_to_opal(tm, &y_m_d, &h_m_s_ms);
+        while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
+                rc = opal_rtc_write(y_m_d, h_m_s_ms);
+                if (rc == OPAL_BUSY_EVENT)
+                        opal_poll_events(NULL);
+                else
+                        msleep(10);
+        }
+
+        return rc == OPAL_SUCCESS ? 0 : -EIO;
+}
+
+/*
+ * TPO  Timed Power-On
+ *
+ * TPO get/set OPAL calls care about the hour and min and to make it consistent
+ * with the rtc utility time conversion functions, we use the 'u64' to store
+ * its value and perform bit shift by 32 before use..
+ */
+static int opal_get_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
+{
+        __be32 __y_m_d, __h_m;
+        struct opal_msg msg;
+        int rc, token;
+        u64 h_m_s_ms;
+        u32 y_m_d;
+
+        token = opal_async_get_token_interruptible();
+        if (token < 0) {
+                if (token != -ERESTARTSYS)
+                        pr_err("Failed to get the async token\n");
+
+                return token;
+        }
+
+        rc = opal_tpo_read(token, &__y_m_d, &__h_m);
+        if (rc != OPAL_ASYNC_COMPLETION) {
+                rc = -EIO;
+                goto exit;
+        }
+
+        rc = opal_async_wait_response(token, &msg);
+        if (rc) {
+                rc = -EIO;
+                goto exit;
+        }
+
+        rc = be64_to_cpu(msg.params[1]);
+        if (rc != OPAL_SUCCESS) {
+                rc = -EIO;
+                goto exit;
+        }
+
+        y_m_d = be32_to_cpu(__y_m_d);
+        h_m_s_ms = ((u64)be32_to_cpu(__h_m) << 32);
+        opal_to_tm(y_m_d, h_m_s_ms, &alarm->time);
+
+exit:
+        opal_async_release_token(token);
+        return rc;
+}
+
+/* Set Timed Power-On */
+static int opal_set_tpo_time(struct device *dev, struct rtc_wkalrm *alarm)
+{
+        u64 h_m_s_ms = 0, token;
+        struct opal_msg msg;
+        u32 y_m_d = 0;
+        int rc;
+
+        tm_to_opal(&alarm->time, &y_m_d, &h_m_s_ms);
+
+        token = opal_async_get_token_interruptible();
+        if (token < 0) {
+                if (token != -ERESTARTSYS)
+                        pr_err("Failed to get the async token\n");
+
+                return token;
+        }
+
+        /* TPO, we care about hour and minute */
+        rc = opal_tpo_write(token, y_m_d,
+                            (u32)((h_m_s_ms >> 32) & 0xffff0000));
+        if (rc != OPAL_ASYNC_COMPLETION) {
+                rc = -EIO;
+                goto exit;
+        }
+
+        rc = opal_async_wait_response(token, &msg);
+        if (rc) {
+                rc = -EIO;
+                goto exit;
+        }
+
+        rc = be64_to_cpu(msg.params[1]);
+        if (rc != OPAL_SUCCESS)
+                rc = -EIO;
+
+exit:
+        opal_async_release_token(token);
+        return rc;
+}
+
+static const struct rtc_class_ops opal_rtc_ops = {
+        .read_time      = opal_get_rtc_time,
+        .set_time       = opal_set_rtc_time,
+        .read_alarm     = opal_get_tpo_time,
+        .set_alarm      = opal_set_tpo_time,
+};
+
+static int opal_rtc_probe(struct platform_device *pdev)
+{
+        struct rtc_device *rtc;
+
+        if (pdev->dev.of_node && of_get_property(pdev->dev.of_node, "has-tpo",
+                                                 NULL))
+                device_set_wakeup_capable(&pdev->dev, true);
+
+        rtc = devm_rtc_device_register(&pdev->dev, DRVNAME, &opal_rtc_ops,
+                                       THIS_MODULE);
+        if (IS_ERR(rtc))
+                return PTR_ERR(rtc);
+
+        rtc->uie_unsupported = 1;
+
+        return 0;
+}
+
+static const struct of_device_id opal_rtc_match[] = {
+        {
+                .compatible     = "ibm,opal-rtc",
+        },
+        { }
+};
+MODULE_DEVICE_TABLE(of, opal_rtc_match);
+
+static const struct platform_device_id opal_rtc_driver_ids[] = {
+        {
+                .name           = "opal-rtc",
+        },
+        { }
+};
+MODULE_DEVICE_TABLE(platform, opal_rtc_driver_ids);
+
+static struct platform_driver opal_rtc_driver = {
+        .probe          = opal_rtc_probe,
+        .id_table       = opal_rtc_driver_ids,
+        .driver         = {
+                .name           = DRVNAME,
+                .owner          = THIS_MODULE,
+                .of_match_table = opal_rtc_match,
+        },
+};
+
+static int __init opal_rtc_init(void)
+{
+        if (!firmware_has_feature(FW_FEATURE_OPAL))
+                return -ENODEV;
+
+        return platform_driver_register(&opal_rtc_driver);
+}
+
+static void __exit opal_rtc_exit(void)
+{
+        platform_driver_unregister(&opal_rtc_driver);
+}
+
+MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM OPAL RTC driver");
+MODULE_LICENSE("GPL");
+
+module_init(opal_rtc_init);
+module_exit(opal_rtc_exit);