[netdrvr smc911x] trim trailing whitespace

2 files changed, 114 insertions, 114 deletions

diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index b3b0d360da14..bdd8702ead54 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -4,7 +4,7 @@
  *
  * Copyright (C) 2005 Sensoria Corp
  *         Derived from the unified SMC91x driver by Nicolas Pitre
- *         and the smsc911x.c reference driver by SMSC 
+ *         and the smsc911x.c reference driver by SMSC
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -113,7 +113,7 @@ MODULE_LICENSE("GPL");
 struct smc911x_local {
         /*
          * If I have to wait until the DMA is finished and ready to reload a
-         * packet, I will store the skbuff here. Then, the DMA will send it 
+         * packet, I will store the skbuff here. Then, the DMA will send it
          * out and free it.
          */
         struct sk_buff *pending_tx_skb;
@@ -246,7 +246,7 @@ static void smc911x_reset(struct net_device *dev)
         /*       Take out of PM setting first */
         if ((SMC_GET_PMT_CTRL() & PMT_CTRL_READY_) == 0) {
                 /* Write to the bytetest will take out of powerdown */
-                SMC_SET_BYTE_TEST(0);     
+                SMC_SET_BYTE_TEST(0);
                 timeout=10;
                 do {
                         udelay(10);
@@ -306,9 +306,9 @@ static void smc911x_reset(struct net_device *dev)
         /* Set to LED outputs */
         SMC_SET_GPIO_CFG(0x70070000);
 
-        /* 
+        /*
          * Deassert IRQ for 1*10us for edge type interrupts
-         * and drive IRQ pin push-pull 
+         * and drive IRQ pin push-pull
          */
         SMC_SET_IRQ_CFG( (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_ );
 
@@ -368,8 +368,8 @@ static void smc911x_enable(struct net_device *dev)
         SMC_SET_FIFO_RSL(0x00);
 
         /* now, enable interrupts */
-        mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ | 
-                INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ | 
+        mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ |
+                INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ |
                 INT_EN_PHY_INT_EN_;
         if (IS_REV_A(lp->revision))
                 mask|=INT_EN_RDFL_EN_;
@@ -404,12 +404,12 @@ static void smc911x_shutdown(struct net_device *dev)
 }
 
 static inline void smc911x_drop_pkt(struct net_device *dev)
-{ 
+{
         unsigned long ioaddr = dev->base_addr;
         unsigned int fifo_count, timeout, reg;
 
         DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", CARDNAME, __FUNCTION__);
-        fifo_count = SMC_GET_RX_FIFO_INF() & 0xFFFF; 
+        fifo_count = SMC_GET_RX_FIFO_INF() & 0xFFFF;
         if (fifo_count <= 4) {
                 /* Manually dump the packet data */
                 while (fifo_count--)
@@ -431,7 +431,7 @@ static inline void smc911x_drop_pkt(struct net_device *dev)
 /*
  * This is the procedure to handle the receipt of a packet.
  * It should be called after checking for packet presence in
- * the RX status FIFO.   It must be called with the spin lock 
+ * the RX status FIFO.   It must be called with the spin lock
  * already held.
  */
 static inline void       smc911x_rcv(struct net_device *dev)
@@ -442,21 +442,21 @@ static inline void	 smc911x_rcv(struct net_device *dev)
         struct sk_buff *skb;
         unsigned char *data;
 
-        DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", 
+        DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n",
                 dev->name, __FUNCTION__);
         status = SMC_GET_RX_STS_FIFO();
-        DBG(SMC_DEBUG_RX, "%s: Rx pkt len %d status 0x%08x \n", 
+        DBG(SMC_DEBUG_RX, "%s: Rx pkt len %d status 0x%08x \n",
                 dev->name, (status & 0x3fff0000) >> 16, status & 0xc000ffff);
         pkt_len = (status & RX_STS_PKT_LEN_) >> 16;
-        if (status & RX_STS_ES_) { 
+        if (status & RX_STS_ES_) {
                 /* Deal with a bad packet */
                 lp->stats.rx_errors++;
-                if (status & RX_STS_CRC_ERR_) 
+                if (status & RX_STS_CRC_ERR_)
                         lp->stats.rx_crc_errors++;
                 else {
                         if (status & RX_STS_LEN_ERR_)
                                 lp->stats.rx_length_errors++;
-                        if (status & RX_STS_MCAST_) 
+                        if (status & RX_STS_MCAST_)
                                 lp->stats.multicast++;
                 }
                 /* Remove the bad packet data from the RX FIFO */
@@ -472,9 +472,9 @@ static inline void	 smc911x_rcv(struct net_device *dev)
                         smc911x_drop_pkt(dev);
                         return;
                 }
-                /* Align IP header to 32 bits 
+                /* Align IP header to 32 bits
                  * Note that the device is configured to add a 2
-                 * byte padding to the packet start, so we really 
+                 * byte padding to the packet start, so we really
                  * want to write to the orignal data pointer */
                 data = skb->data;
                 skb_reserve(skb, 2);
@@ -529,25 +529,25 @@ static void smc911x_hardware_send_pkt(struct net_device *dev)
         skb = lp->pending_tx_skb;
         lp->pending_tx_skb = NULL;
 
-        /* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */ 
-        /* cmdB {31:16] pkt tag [10:0] length */ 
+        /* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */
+        /* cmdB {31:16] pkt tag [10:0] length */
 #ifdef SMC_USE_DMA
         /* 16 byte buffer alignment mode */
         buf = (char*)((u32)(skb->data) & ~0xF);
-        len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF; 
+        len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF;
         cmdA = (1<<24) | (((u32)skb->data & 0xF)<<16) |
                         TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ |
                         skb->len;
 #else
         buf = (char*)((u32)skb->data & ~0x3);
-        len = (skb->len + 3 + ((u32)skb->data & 3)) & ~0x3; 
+        len = (skb->len + 3 + ((u32)skb->data & 3)) & ~0x3;
         cmdA = (((u32)skb->data & 0x3) << 16) |
                         TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ |
                         skb->len;
 #endif
-        /* tag is packet length so we can use this in stats update later */ 
+        /* tag is packet length so we can use this in stats update later */
         cmdB = (skb->len  << 16) | (skb->len & 0x7FF);
- 
+
         DBG(SMC_DEBUG_TX, "%s: TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n",
                  dev->name, len, len, buf, cmdA, cmdB);
         SMC_SET_TX_FIFO(cmdA);
@@ -587,7 +587,7 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
         unsigned int free;
         unsigned long flags;
 
-        DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", 
+        DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
                 dev->name, __FUNCTION__);
 
         BUG_ON(lp->pending_tx_skb != NULL);
@@ -597,7 +597,7 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         /* Turn off the flow when running out of space in FIFO */
         if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) {
-                DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n", 
+                DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n",
                         dev->name, free);
                 spin_lock_irqsave(&lp->lock, flags);
                 /* Reenable when at least 1 packet of size MTU present */
@@ -607,15 +607,15 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                 spin_unlock_irqrestore(&lp->lock, flags);
         }
 
-        /* Drop packets when we run out of space in TX FIFO 
+        /* Drop packets when we run out of space in TX FIFO
          * Account for overhead required for:
-         * 
-         *        Tx command words                       8 bytes 
+         *
+         *        Tx command words                       8 bytes
          *        Start offset                           15 bytes
          *        End padding                            15 bytes
-         */      
+         */
         if (unlikely(free < (skb->len + 8 + 15 + 15))) {
-                printk("%s: No Tx free space %d < %d\n", 
+                printk("%s: No Tx free space %d < %d\n",
                         dev->name, free, skb->len);
                 lp->pending_tx_skb = NULL;
                 lp->stats.tx_errors++;
@@ -623,11 +623,11 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
                 dev_kfree_skb(skb);
                 return 0;
         }
-        
+
 #ifdef SMC_USE_DMA
         {
                 /* If the DMA is already running then defer this packet Tx until
-                 * the DMA IRQ starts it 
+                 * the DMA IRQ starts it
                  */
                 spin_lock_irqsave(&lp->lock, flags);
                 if (lp->txdma_active) {
@@ -660,23 +660,23 @@ static void smc911x_tx(struct net_device *dev)
         struct smc911x_local *lp = netdev_priv(dev);
         unsigned int tx_status;
 
-        DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", 
+        DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n",
                 dev->name, __FUNCTION__);
 
         /* Collect the TX status */
         while (((SMC_GET_TX_FIFO_INF() & TX_FIFO_INF_TSUSED_) >> 16) != 0) {
-                DBG(SMC_DEBUG_TX, "%s: Tx stat FIFO used 0x%04x\n", 
-                        dev->name, 
+                DBG(SMC_DEBUG_TX, "%s: Tx stat FIFO used 0x%04x\n",
+                        dev->name,
                         (SMC_GET_TX_FIFO_INF() & TX_FIFO_INF_TSUSED_) >> 16);
                 tx_status = SMC_GET_TX_STS_FIFO();
                 lp->stats.tx_packets++;
                 lp->stats.tx_bytes+=tx_status>>16;
-                DBG(SMC_DEBUG_TX, "%s: Tx FIFO tag 0x%04x status 0x%04x\n", 
-                        dev->name, (tx_status & 0xffff0000) >> 16, 
+                DBG(SMC_DEBUG_TX, "%s: Tx FIFO tag 0x%04x status 0x%04x\n",
+                        dev->name, (tx_status & 0xffff0000) >> 16,
                         tx_status & 0x0000ffff);
-                /* count Tx errors, but ignore lost carrier errors when in 
+                /* count Tx errors, but ignore lost carrier errors when in
                  * full-duplex mode */
-                if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx && 
+                if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx &&
                     !(tx_status & 0x00000306))) {
                         lp->stats.tx_errors++;
                 }
@@ -687,10 +687,10 @@ static void smc911x_tx(struct net_device *dev)
                         lp->stats.collisions+=(tx_status & TX_STS_COLL_CNT_) >> 3;
                 }
                 /* carrier error only has meaning for half-duplex communication */
-                if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) && 
+                if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) &&
                     !lp->ctl_rfduplx) {
                         lp->stats.tx_carrier_errors++;
-                }        
+                }
                 if (tx_status & TX_STS_LATE_COLL_) {
                         lp->stats.collisions++;
                         lp->stats.tx_aborted_errors++;
@@ -753,7 +753,7 @@ static void smc911x_phy_detect(struct net_device *dev)
         switch(lp->version) {
                 case 0x115:
                 case 0x117:
-                        cfg = SMC_GET_HW_CFG(); 
+                        cfg = SMC_GET_HW_CFG();
                         if (cfg & HW_CFG_EXT_PHY_DET_) {
                                 cfg &= ~HW_CFG_PHY_CLK_SEL_;
                                 cfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_;
@@ -779,8 +779,8 @@ static void smc911x_phy_detect(struct net_device *dev)
                                         SMC_GET_PHY_ID2(phyaddr & 31, id2);
 
                                         /* Make sure it is a valid identifier */
-                                        if (id1 != 0x0000 && id1 != 0xffff && 
-                                            id1 != 0x8000 && id2 != 0x0000 && 
+                                        if (id1 != 0x0000 && id1 != 0xffff &&
+                                            id1 != 0x8000 && id2 != 0x0000 &&
                                             id2 != 0xffff && id2 != 0x8000) {
                                                 /* Save the PHY's address */
                                                 lp->mii.phy_id = phyaddr & 31;
@@ -875,9 +875,9 @@ static int smc911x_phy_reset(struct net_device *dev, int phy)
                 reg = SMC_GET_PMT_CTRL();
                 spin_unlock_irqrestore(&lp->lock, flags);
                 if (!(reg & PMT_CTRL_PHY_RST_)) {
-                        /* extra delay required because the phy may 
+                        /* extra delay required because the phy may
                          * not be completed with its reset
-                         * when PHY_BCR_RESET_ is cleared. 256us 
+                         * when PHY_BCR_RESET_ is cleared. 256us
                          * should suffice, but use 500us to be safe
                          */
                         udelay(500);
@@ -1064,9 +1064,9 @@ static void smc911x_phy_interrupt(struct net_device *dev)
         smc911x_phy_check_media(dev, 0);
         /* read to clear status bits */
         SMC_GET_PHY_INT_SRC(phyaddr,status);
-        DBG(SMC_DEBUG_MISC, "%s: PHY interrupt status 0x%04x\n", 
+        DBG(SMC_DEBUG_MISC, "%s: PHY interrupt status 0x%04x\n",
                 dev->name, status & 0xffff);
-        DBG(SMC_DEBUG_MISC, "%s: AFC_CFG 0x%08x\n", 
+        DBG(SMC_DEBUG_MISC, "%s: AFC_CFG 0x%08x\n",
                 dev->name, SMC_GET_AFC_CFG());
 }
 
@@ -1121,7 +1121,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs
                 if (status & INT_STS_RXE_) {
                         SMC_ACK_INT(INT_STS_RXE_);
                         lp->stats.rx_errors++;
-                } 
+                }
                 if (status & INT_STS_RXDFH_INT_) {
                         SMC_ACK_INT(INT_STS_RXDFH_INT_);
                         lp->stats.rx_dropped+=SMC_GET_RX_DROP();
@@ -1160,20 +1160,20 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs
                 if ((status & INT_STS_RSFL_) || rx_overrun) {
                         unsigned int fifo;
                         DBG(SMC_DEBUG_RX, "%s: RX irq\n", dev->name);
-                        fifo = SMC_GET_RX_FIFO_INF(); 
-                        pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16; 
-                        DBG(SMC_DEBUG_RX, "%s: Rx FIFO pkts %d, bytes %d\n", 
+                        fifo = SMC_GET_RX_FIFO_INF();
+                        pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16;
+                        DBG(SMC_DEBUG_RX, "%s: Rx FIFO pkts %d, bytes %d\n",
                                 dev->name, pkts, fifo & 0xFFFF );
                         if (pkts != 0) {
 #ifdef SMC_USE_DMA
                                 unsigned int fifo;
                                 if (lp->rxdma_active){
-                                        DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, 
+                                        DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
                                                 "%s: RX DMA active\n", dev->name);
                                         /* The DMA is already running so up the IRQ threshold */
                                         fifo = SMC_GET_FIFO_INT() & ~0xFF;
                                         fifo |= pkts & 0xFF;
-                                        DBG(SMC_DEBUG_RX, 
+                                        DBG(SMC_DEBUG_RX,
                                                 "%s: Setting RX stat FIFO threshold to %d\n",
                                                 dev->name, fifo & 0xff);
                                         SMC_SET_FIFO_INT(fifo);
@@ -1197,8 +1197,8 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs
                 /* Handle transmit done condition */
 #if 1
                 if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) {
-                        DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC, 
-                                "%s: Tx stat FIFO limit (%d) /GPT irq\n", 
+                        DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC,
+                                "%s: Tx stat FIFO limit (%d) /GPT irq\n",
                                 dev->name, (SMC_GET_FIFO_INT() & 0x00ff0000) >> 16);
                         smc911x_tx(dev);
                         SMC_SET_GPT_CFG(GPT_CFG_TIMER_EN_ | 10000);
@@ -1213,16 +1213,16 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs
                 }
 
                 if (status & INT_STS_GPT_INT_) {
-                        DBG(SMC_DEBUG_RX, "%s: IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n", 
-                                dev->name, 
-                                SMC_GET_IRQ_CFG(), 
-                                SMC_GET_FIFO_INT(), 
+                        DBG(SMC_DEBUG_RX, "%s: IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n",
+                                dev->name,
+                                SMC_GET_IRQ_CFG(),
+                                SMC_GET_FIFO_INT(),
                                 SMC_GET_RX_CFG());
                         DBG(SMC_DEBUG_RX, "%s: Rx Stat FIFO Used 0x%02x "
                                 "Data FIFO Used 0x%04x Stat FIFO 0x%08x\n",
-                                dev->name, 
-                                (SMC_GET_RX_FIFO_INF() & 0x00ff0000) >> 16, 
-                                SMC_GET_RX_FIFO_INF() & 0xffff, 
+                                dev->name,
+                                (SMC_GET_RX_FIFO_INF() & 0x00ff0000) >> 16,
+                                SMC_GET_RX_FIFO_INF() & 0xffff,
                                 SMC_GET_RX_STS_FIFO_PEEK());
                         SMC_SET_GPT_CFG(GPT_CFG_TIMER_EN_ | 10000);
                         SMC_ACK_INT(INT_STS_GPT_INT_);
@@ -1240,7 +1240,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs
         /* restore mask state */
         SMC_SET_INT_EN(mask);
 
-        DBG(SMC_DEBUG_MISC, "%s: Interrupt done (%d loops)\n", 
+        DBG(SMC_DEBUG_MISC, "%s: Interrupt done (%d loops)\n",
                 dev->name, 8-timeout);
 
         spin_unlock_irqrestore(&lp->lock, flags);
@@ -1272,7 +1272,7 @@ smc911x_tx_dma_irq(int dma, void *data, struct pt_regs *regs)
         if (lp->pending_tx_skb != NULL)
                 smc911x_hardware_send_pkt(dev);
         else {
-                DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, 
+                DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
                         "%s: No pending Tx packets. DMA disabled\n", dev->name);
                 spin_lock_irqsave(&lp->lock, flags);
                 lp->txdma_active = 0;
@@ -1282,7 +1282,7 @@ smc911x_tx_dma_irq(int dma, void *data, struct pt_regs *regs)
                 spin_unlock_irqrestore(&lp->lock, flags);
         }
 
-        DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, 
+        DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA,
                 "%s: TX DMA irq completed\n", dev->name);
 }
 static void
@@ -1311,15 +1311,15 @@ smc911x_rx_dma_irq(int dma, void *data, struct pt_regs *regs)
         lp->stats.rx_bytes += skb->len;
 
         spin_lock_irqsave(&lp->lock, flags);
-        pkts = (SMC_GET_RX_FIFO_INF() & RX_FIFO_INF_RXSUSED_) >> 16; 
+        pkts = (SMC_GET_RX_FIFO_INF() & RX_FIFO_INF_RXSUSED_) >> 16;
         if (pkts != 0) {
                 smc911x_rcv(dev);
         }else {
                 lp->rxdma_active = 0;
         }
         spin_unlock_irqrestore(&lp->lock, flags);
-        DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, 
-                "%s: RX DMA irq completed. DMA RX FIFO PKTS %d\n", 
+        DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA,
+                "%s: RX DMA irq completed. DMA RX FIFO PKTS %d\n",
                 dev->name, pkts);
 }
 #endif   /* SMC_USE_DMA */
@@ -1355,8 +1355,8 @@ static void smc911x_timeout(struct net_device *dev)
                 dev->name, status, mask);
 
         /* Dump the current TX FIFO contents and restart */
-        mask = SMC_GET_TX_CFG(); 
-        SMC_SET_TX_CFG(mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_); 
+        mask = SMC_GET_TX_CFG();
+        SMC_SET_TX_CFG(mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_);
         /*
          * Reconfiguring the PHY doesn't seem like a bad idea here, but
          * smc911x_phy_configure() calls msleep() which calls schedule_timeout()
@@ -1387,7 +1387,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
         unsigned int mcr, update_multicast = 0;
         unsigned long flags;
         /* table for flipping the order of 5 bits */
-        static const unsigned char invert5[] = 
+        static const unsigned char invert5[] =
                 {0x00, 0x10, 0x08, 0x18, 0x04, 0x14, 0x0C, 0x1C,
                  0x02, 0x12, 0x0A, 0x1A, 0x06, 0x16, 0x0E, 0x1E,
                  0x01, 0x11, 0x09, 0x19, 0x05, 0x15, 0x0D, 0x1D,
@@ -1463,7 +1463,7 @@ static void smc911x_set_multicast_list(struct net_device *dev)
                 /* now, the table can be loaded into the chipset */
                 update_multicast = 1;
         } else   {
-                DBG(SMC_DEBUG_MISC, "%s: ~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n", 
+                DBG(SMC_DEBUG_MISC, "%s: ~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n",
                         dev->name);
                 mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
 
@@ -1478,8 +1478,8 @@ static void smc911x_set_multicast_list(struct net_device *dev)
         spin_lock_irqsave(&lp->lock, flags);
         SMC_SET_MAC_CR(mcr);
         if (update_multicast) {
-                DBG(SMC_DEBUG_MISC, 
-                        "%s: update mcast hash table 0x%08x 0x%08x\n", 
+                DBG(SMC_DEBUG_MISC,
+                        "%s: update mcast hash table 0x%08x 0x%08x\n",
                         dev->name, multicast_table[0], multicast_table[1]);
                 SMC_SET_HASHL(multicast_table[0]);
                 SMC_SET_HASHH(multicast_table[1]);
@@ -1614,8 +1614,8 @@ smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
                         cmd->transceiver = XCVR_EXTERNAL;
                 cmd->port = 0;
                 SMC_GET_PHY_SPECIAL(lp->mii.phy_id, status);
-                cmd->duplex = 
-                        (status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ? 
+                cmd->duplex =
+                        (status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ?
                                 DUPLEX_FULL : DUPLEX_HALF;
                 ret = 0;
         }
@@ -1687,11 +1687,11 @@ static void smc911x_ethtool_setmsglevel(struct net_device *dev, u32 level)
 static int smc911x_ethtool_getregslen(struct net_device *dev)
 {
         /* System regs + MAC regs + PHY regs */
-        return (((E2P_CMD - ID_REV)/4 + 1) + 
-                        (WUCSR - MAC_CR)+1 + 32) * sizeof(u32); 
+        return (((E2P_CMD - ID_REV)/4 + 1) +
+                        (WUCSR - MAC_CR)+1 + 32) * sizeof(u32);
 }
 
-static void smc911x_ethtool_getregs(struct net_device *dev, 
+static void smc911x_ethtool_getregs(struct net_device *dev,
                                                                                  struct ethtool_regs* regs, void *buf)
 {
         unsigned long ioaddr = dev->base_addr;
@@ -1702,19 +1702,19 @@ static void smc911x_ethtool_getregs(struct net_device *dev,
 
         regs->version = lp->version;
         for(i=ID_REV;i<=E2P_CMD;i+=4) {
-                data[j++] = SMC_inl(ioaddr,i);     
+                data[j++] = SMC_inl(ioaddr,i);
         }
         for(i=MAC_CR;i<=WUCSR;i++) {
                 spin_lock_irqsave(&lp->lock, flags);
                 SMC_GET_MAC_CSR(i, reg);
                 spin_unlock_irqrestore(&lp->lock, flags);
-                data[j++] = reg;         
+                data[j++] = reg;
         }
         for(i=0;i<=31;i++) {
                 spin_lock_irqsave(&lp->lock, flags);
                 SMC_GET_MII(i, lp->mii.phy_id, reg);
                 spin_unlock_irqrestore(&lp->lock, flags);
-                data[j++] = reg & 0xFFFF;         
+                data[j++] = reg & 0xFFFF;
         }
 }
 
@@ -1727,60 +1727,60 @@ static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev)
         e2p_cmd = SMC_GET_E2P_CMD();
         for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) {
                 if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) {
-                        PRINTK("%s: %s timeout waiting for EEPROM to respond\n", 
+                        PRINTK("%s: %s timeout waiting for EEPROM to respond\n",
                                 dev->name, __FUNCTION__);
                         return -EFAULT;
-                } 
+                }
                 mdelay(1);
                 e2p_cmd = SMC_GET_E2P_CMD();
         }
         if (timeout == 0) {
-                PRINTK("%s: %s timeout waiting for EEPROM CMD not busy\n", 
+                PRINTK("%s: %s timeout waiting for EEPROM CMD not busy\n",
                         dev->name, __FUNCTION__);
                 return -ETIMEDOUT;
         }
         return 0;
 }
 
-static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev, 
+static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev,
                                                                                                         int cmd, int addr)
 {
         unsigned long ioaddr = dev->base_addr;
         int ret;
 
-        if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) 
+        if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
                 return ret;
-        SMC_SET_E2P_CMD(E2P_CMD_EPC_BUSY_ | 
-                ((cmd) & (0x7<<28)) | 
+        SMC_SET_E2P_CMD(E2P_CMD_EPC_BUSY_ |
+                ((cmd) & (0x7<<28)) |
                 ((addr) & 0xFF));
         return 0;
 }
 
-static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev, 
+static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev,
                                                                                                         u8 *data)
 {
         unsigned long ioaddr = dev->base_addr;
         int ret;
 
-        if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) 
+        if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
                 return ret;
         *data = SMC_GET_E2P_DATA();
         return 0;
 }
 
-static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev, 
+static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev,
                                                                                                          u8 data)
 {
         unsigned long ioaddr = dev->base_addr;
         int ret;
 
-        if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) 
+        if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0)
                 return ret;
         SMC_SET_E2P_DATA(data);
         return 0;
 }
 
-static int smc911x_ethtool_geteeprom(struct net_device *dev, 
+static int smc911x_ethtool_geteeprom(struct net_device *dev,
                                                                           struct ethtool_eeprom *eeprom, u8 *data)
 {
         u8 eebuf[SMC911X_EEPROM_LEN];
@@ -1793,10 +1793,10 @@ static int smc911x_ethtool_geteeprom(struct net_device *dev,
                         return ret;
                 }
         memcpy(data, eebuf+eeprom->offset, eeprom->len);
-        return 0;        
+        return 0;
 }
 
-static int smc911x_ethtool_seteeprom(struct net_device *dev, 
+static int smc911x_ethtool_seteeprom(struct net_device *dev,
                                                                            struct ethtool_eeprom *eeprom, u8 *data)
 {
         int i, ret;
@@ -1953,7 +1953,7 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr)
                 retval = -EINVAL;
                 goto err_out;
         }
-                 
+
         /* fill in some of the fields */
         dev->base_addr = ioaddr;
         lp->version = chip_ids[i].id;
@@ -1965,7 +1965,7 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr)
 
         /* Set the automatic flow control values */
         switch(lp->tx_fifo_kb) {
-                /*       
+                /*
                  *       AFC_HI is about ((Rx Data Fifo Size)*2/3)/64
                  *       AFC_LO is AFC_HI/2
                  *       BACK_DUR is about 5uS*(AFC_LO) rounded down
@@ -1990,7 +1990,7 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr)
                         lp->afc_cfg=0x003C1E6F;break;
                 case 11:/* 4800 Rx Data Fifo Size */
                         lp->afc_cfg=0x0032195F;break;
-                /*       
+                /*
                  *       AFC_HI is ~1520 bytes less than RX Data Fifo Size
                  *       AFC_LO is AFC_HI/2
                  *       BACK_DUR is about 5uS*(AFC_LO) rounded down
@@ -2002,13 +2002,13 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr)
                 case 14:/* 1920 Rx Data Fifo Size */
                         lp->afc_cfg=0x0006032F;break;
                  default:
-                         PRINTK("%s: ERROR -- no AFC_CFG setting found", 
+                         PRINTK("%s: ERROR -- no AFC_CFG setting found",
                                 dev->name);
                          break;
         }
 
-        DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX, 
-                "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME, 
+        DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX,
+                "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME,
                 lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg);
 
         spin_lock_init(&lp->lock);
@@ -2129,7 +2129,7 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr)
                         PRINTK("%s: External PHY 0x%08x\n", dev->name, lp->phy_type);
                 }
         }
-        
+
 err_out:
 #ifdef SMC_USE_DMA
         if (retval) {
@@ -2292,7 +2292,7 @@ static struct platform_driver smc911x_driver = {
                 .name    = CARDNAME,
         },
 };
- 
+
 static int __init smc911x_init(void)
 {
         return platform_driver_register(&smc911x_driver);
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 0779a228d5a1..962a710459fc 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -73,13 +73,13 @@
 #if      SMC_USE_PXA_DMA
 #define SMC_USE_DMA
 
-/* 
- * Define the request and free functions 
+/*
+ * Define the request and free functions
  * These are unfortunately architecture specific as no generic allocation
  * mechanism exits
  */
 #define SMC_DMA_REQUEST(dev, handler) \
-         pxa_request_dma(dev->name, DMA_PRIO_LOW, handler, dev)    
+         pxa_request_dma(dev->name, DMA_PRIO_LOW, handler, dev)
 
 #define SMC_DMA_FREE(dev, dma) \
          pxa_free_dma(dma)
@@ -101,14 +101,14 @@
 
 static dma_addr_t rx_dmabuf, tx_dmabuf;
 static int rx_dmalen, tx_dmalen;
- 
+
 #ifdef SMC_insl
 #undef SMC_insl
 #define SMC_insl(a, r, p, l) \
         smc_pxa_dma_insl(lp->dev, a, lp->physaddr, r, lp->rxdma, p, l)
 
 static inline void
-smc_pxa_dma_insl(struct device *dev, u_long ioaddr, u_long physaddr, 
+smc_pxa_dma_insl(struct device *dev, u_long ioaddr, u_long physaddr,
                 int reg, int dma, u_char *buf, int len)
 {
         /* 64 bit alignment is required for memory to memory DMA */
@@ -136,7 +136,7 @@ smc_pxa_dma_insl(struct device *dev, u_long ioaddr, u_long physaddr,
         smc_pxa_dma_insw(lp->dev, a, lp->physaddr, r, lp->rxdma, p, l)
 
 static inline void
-smc_pxa_dma_insw(struct device *dev, u_long ioaddr, u_long physaddr, 
+smc_pxa_dma_insw(struct device *dev, u_long ioaddr, u_long physaddr,
                 int reg, int dma, u_char *buf, int len)
 {
         /* 64 bit alignment is required for memory to memory DMA */
@@ -164,7 +164,7 @@ smc_pxa_dma_insw(struct device *dev, u_long ioaddr, u_long physaddr,
          smc_pxa_dma_outsl(lp->dev, a, lp->physaddr, r, lp->txdma, p, l)
 
 static inline void
-smc_pxa_dma_outsl(struct device *dev, u_long ioaddr, u_long physaddr, 
+smc_pxa_dma_outsl(struct device *dev, u_long ioaddr, u_long physaddr,
                 int reg, int dma, u_char *buf, int len)
 {
         /* 64 bit alignment is required for memory to memory DMA */
@@ -192,7 +192,7 @@ smc_pxa_dma_outsl(struct device *dev, u_long ioaddr, u_long physaddr,
         smc_pxa_dma_outsw(lp->dev, a, lp->physaddr, r, lp->txdma, p, l)
 
 static inline void
-smc_pxa_dma_outsw(struct device *dev, u_long ioaddr, u_long physaddr, 
+smc_pxa_dma_outsw(struct device *dev, u_long ioaddr, u_long physaddr,
                   int reg, int dma, u_char *buf, int len)
 {
         /* 64 bit alignment is required for memory to memory DMA */
@@ -607,7 +607,7 @@ struct chip_id {
         u16 id;
         char *name;
 };
- 
+
 static const struct chip_id chip_ids[] =  {
         { CHIP_9115, "LAN9115" },
         { CHIP_9116, "LAN9116" },