bnx2x: Restore global registers back to default.

Several KR registers were not set correctly back to default after
loopback test, so set those global registers over the global WC lane (zero)
rather than the current lane.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 56 insertions, 22 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index f2436ea641a6..5e8f7b7a8f65 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -3558,13 +3558,11 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy,
 static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
                                         struct link_params *params,
                                         struct link_vars *vars) {
-        u16 val16 = 0, lane, i, cl72_ctrl;
+        u16 lane, i, cl72_ctrl, an_adv = 0;
+        u16 ucode_ver;
         struct bnx2x *bp = params->bp;
         static struct bnx2x_reg_set reg_set[] = {
                 {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
-                {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
-                {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff},
-                {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555},
                 {MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0},
                 {MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415},
                 {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190},
@@ -3589,7 +3587,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
              (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
             (vars->line_speed == SPEED_1000)) {
                 u32 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2;
-                val16 |= (1<<5);
+                an_adv |= (1<<5);
 
                 /* Enable CL37 1G Parallel Detect */
                 bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, addr, 0x1);
@@ -3599,11 +3597,14 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
              (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
             (vars->line_speed ==  SPEED_10000)) {
                 /* Check adding advertisement for 10G KR */
-                val16 |= (1<<7);
+                an_adv |= (1<<7);
                 /* Enable 10G Parallel Detect */
+                CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+                                  MDIO_AER_BLOCK_AER_REG, 0);
+
                 bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
                                  MDIO_WC_REG_PAR_DET_10G_CTRL, 1);
-
+                bnx2x_set_aer_mmd(params, phy);
                 DP(NETIF_MSG_LINK, "Advertize 10G\n");
         }
 
@@ -3623,7 +3624,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 
         /* Advertised speeds */
         bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
-                         MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16);
+                         MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv);
 
         /* Advertised and set FEC (Forward Error Correction) */
         bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
@@ -3647,9 +3648,10 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
         /* Set KR Autoneg Work-Around flag for Warpcore version older than D108
          */
         bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
-                        MDIO_WC_REG_UC_INFO_B1_VERSION, &val16);
-        if (val16 < 0xd108) {
-                DP(NETIF_MSG_LINK, "Enable AN KR work-around\n");
+                        MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver);
+        if (ucode_ver < 0xd108) {
+                DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n",
+                               ucode_ver);
                 vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;
         }
         bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
@@ -3670,21 +3672,16 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy,
                                       struct link_vars *vars)
 {
         struct bnx2x *bp = params->bp;
-        u16 i;
+        u16 val16, i, lane;
         static struct bnx2x_reg_set reg_set[] = {
                 /* Disable Autoneg */
                 {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
-                {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
                 {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
                         0x3f00},
                 {MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0},
                 {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0},
                 {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1},
                 {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa},
-                /* Disable CL36 PCS Tx */
-                {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0x0},
-                /* Double Wide Single Data Rate @ pll rate */
-                {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0xFFFF},
                 /* Leave cl72 training enable, needed for KR */
                 {MDIO_PMA_DEVAD,
                 MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150,
@@ -3695,11 +3692,24 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy,
                 bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
                                  reg_set[i].val);
 
-        /* Leave CL72 enabled */
-        bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
-                                 MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
-                                 0x3800);
+        lane = bnx2x_get_warpcore_lane(phy, params);
+        /* Global registers */
+        CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+                          MDIO_AER_BLOCK_AER_REG, 0);
+        /* Disable CL36 PCS Tx */
+        bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+                        MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+        val16 &= ~(0x0011 << lane);
+        bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+                         MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
 
+        bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+                        MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+        val16 |= (0x0303 << (lane << 1));
+        bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+                         MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+        /* Restore AER */
+        bnx2x_set_aer_mmd(params, phy);
         /* Set speed via PMA/PMD register */
         bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD,
                          MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040);
@@ -4322,7 +4332,7 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy,
                                       struct link_params *params)
 {
         struct bnx2x *bp = params->bp;
-        u16 val16;
+        u16 val16, lane;
         bnx2x_sfp_e3_set_transmitter(params, phy, 0);
         bnx2x_set_mdio_clk(bp, params->chip_id, params->port);
         bnx2x_set_aer_mmd(params, phy);
@@ -4359,6 +4369,30 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy,
                          MDIO_WC_REG_XGXSBLK1_LANECTRL2,
                          val16 & 0xff00);
 
+        lane = bnx2x_get_warpcore_lane(phy, params);
+        /* Disable CL36 PCS Tx */
+        bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+                        MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+        val16 |= (0x11 << lane);
+        if (phy->flags & FLAGS_WC_DUAL_MODE)
+                val16 |= (0x22 << lane);
+        bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+                         MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
+
+        bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+                        MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+        val16 &= ~(0x0303 << (lane << 1));
+        val16 |= (0x0101 << (lane << 1));
+        if (phy->flags & FLAGS_WC_DUAL_MODE) {
+                val16 &= ~(0x0c0c << (lane << 1));
+                val16 |= (0x0404 << (lane << 1));
+        }
+
+        bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+                         MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+        /* Restore AER */
+        bnx2x_set_aer_mmd(params, phy);
+
 }
 
 static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy,