Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel

Conflicts:

	arch/arm/mach-pxa/pxa25x.c

2 files changed, 46 insertions, 0 deletions

diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 37424f01ebee..0e081292f4f7 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -26,6 +26,49 @@
 #include <mach/irda.h>
 #include <mach/hardware.h>
 #include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
+
+#define FICP            __REG(0x40800000)  /* Start of FICP area */
+#define ICCR0           __REG(0x40800000)  /* ICP Control Register 0 */
+#define ICCR1           __REG(0x40800004)  /* ICP Control Register 1 */
+#define ICCR2           __REG(0x40800008)  /* ICP Control Register 2 */
+#define ICDR            __REG(0x4080000c)  /* ICP Data Register */
+#define ICSR0           __REG(0x40800014)  /* ICP Status Register 0 */
+#define ICSR1           __REG(0x40800018)  /* ICP Status Register 1 */
+
+#define ICCR0_AME       (1 << 7)        /* Address match enable */
+#define ICCR0_TIE       (1 << 6)        /* Transmit FIFO interrupt enable */
+#define ICCR0_RIE       (1 << 5)        /* Recieve FIFO interrupt enable */
+#define ICCR0_RXE       (1 << 4)        /* Receive enable */
+#define ICCR0_TXE       (1 << 3)        /* Transmit enable */
+#define ICCR0_TUS       (1 << 2)        /* Transmit FIFO underrun select */
+#define ICCR0_LBM       (1 << 1)        /* Loopback mode */
+#define ICCR0_ITR       (1 << 0)        /* IrDA transmission */
+
+#define ICCR2_RXP       (1 << 3)        /* Receive Pin Polarity select */
+#define ICCR2_TXP       (1 << 2)        /* Transmit Pin Polarity select */
+#define ICCR2_TRIG      (3 << 0)        /* Receive FIFO Trigger threshold */
+#define ICCR2_TRIG_8    (0 << 0)        /*      >= 8 bytes */
+#define ICCR2_TRIG_16   (1 << 0)        /*      >= 16 bytes */
+#define ICCR2_TRIG_32   (2 << 0)        /*      >= 32 bytes */
+
+#ifdef CONFIG_PXA27x
+#define ICSR0_EOC       (1 << 6)        /* DMA End of Descriptor Chain */
+#endif
+#define ICSR0_FRE       (1 << 5)        /* Framing error */
+#define ICSR0_RFS       (1 << 4)        /* Receive FIFO service request */
+#define ICSR0_TFS       (1 << 3)        /* Transnit FIFO service request */
+#define ICSR0_RAB       (1 << 2)        /* Receiver abort */
+#define ICSR0_TUR       (1 << 1)        /* Trunsmit FIFO underun */
+#define ICSR0_EIF       (1 << 0)        /* End/Error in FIFO */
+
+#define ICSR1_ROR       (1 << 6)        /* Receiver FIFO underrun  */
+#define ICSR1_CRE       (1 << 5)        /* CRC error */
+#define ICSR1_EOF       (1 << 4)        /* End of frame */
+#define ICSR1_TNF       (1 << 3)        /* Transmit FIFO not full */
+#define ICSR1_RNE       (1 << 2)        /* Receive FIFO not empty */
+#define ICSR1_TBY       (1 << 1)        /* Tramsmiter busy flag */
+#define ICSR1_RSY       (1 << 0)        /* Recevier synchronized flag */
 
 #define IrSR_RXPL_NEG_IS_ZERO (1<<4)
 #define IrSR_RXPL_POS_IS_ZERO 0x0
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index cc7d85bdfb3e..870b4c33f108 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -200,6 +200,9 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
 
 
 #ifdef SMC_USE_PXA_DMA
+
+#include <mach/dma.h>
+
 /*
  * Define the request and free functions
  * These are unfortunately architecture specific as no generic allocation