Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus
  [POWERPC] PS3: Update ps3_defconfig
  [POWERPC] PS3: Remove unsupported wakeup sources
  [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static
  [POWERPC] PS3: Add time include to lpm
  [POWERPC] Fix slb.c compile warnings
  [POWERPC] Xilinx: Fix compile warnings
  [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c
  [RAPIDIO] fix current kernel-doc notation
  [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot
  Fix a potential issue in mpc52xx uart driver
  [POWERPC] mpc5200: Allow for fixed speed MII configurations
  [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board

2 files changed, 74 insertions, 42 deletions

diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index d21b7ab64bd1..5f9c42e7a7f1 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -43,6 +43,29 @@
 
 #define DRIVER_NAME "mpc52xx-fec"
 
+#define FEC5200_PHYADDR_NONE    (-1)
+#define FEC5200_PHYADDR_7WIRE   (-2)
+
+/* Private driver data structure */
+struct mpc52xx_fec_priv {
+        int duplex;
+        int speed;
+        int r_irq;
+        int t_irq;
+        struct mpc52xx_fec __iomem *fec;
+        struct bcom_task *rx_dmatsk;
+        struct bcom_task *tx_dmatsk;
+        spinlock_t lock;
+        int msg_enable;
+
+        /* MDIO link details */
+        int phy_addr;
+        unsigned int phy_speed;
+        struct phy_device *phydev;
+        enum phy_state link;
+};
+
+
 static irqreturn_t mpc52xx_fec_interrupt(int, void *);
 static irqreturn_t mpc52xx_fec_rx_interrupt(int, void *);
 static irqreturn_t mpc52xx_fec_tx_interrupt(int, void *);
@@ -223,7 +246,7 @@ static int mpc52xx_fec_phy_start(struct net_device *dev)
         struct mpc52xx_fec_priv *priv = netdev_priv(dev);
         int err;
 
-        if (!priv->has_phy)
+        if (priv->phy_addr < 0)
                 return 0;
 
         err = mpc52xx_fec_init_phy(dev);
@@ -243,7 +266,7 @@ static void mpc52xx_fec_phy_stop(struct net_device *dev)
 {
         struct mpc52xx_fec_priv *priv = netdev_priv(dev);
 
-        if (!priv->has_phy)
+        if (!priv->phydev)
                 return;
 
         phy_disconnect(priv->phydev);
@@ -255,7 +278,7 @@ static void mpc52xx_fec_phy_stop(struct net_device *dev)
 static int mpc52xx_fec_phy_mii_ioctl(struct mpc52xx_fec_priv *priv,
                 struct mii_ioctl_data *mii_data, int cmd)
 {
-        if (!priv->has_phy)
+        if (!priv->phydev)
                 return -ENOTSUPP;
 
         return phy_mii_ioctl(priv->phydev, mii_data, cmd);
@@ -265,7 +288,7 @@ static void mpc52xx_fec_phy_hw_init(struct mpc52xx_fec_priv *priv)
 {
         struct mpc52xx_fec __iomem *fec = priv->fec;
 
-        if (!priv->has_phy)
+        if (priv->phydev)
                 return;
 
         out_be32(&fec->mii_speed, priv->phy_speed);
@@ -704,7 +727,7 @@ static void mpc52xx_fec_start(struct net_device *dev)
         rcntrl = FEC_RX_BUFFER_SIZE << 16;      /* max frame length */
         rcntrl |= FEC_RCNTRL_FCE;
 
-        if (priv->has_phy)
+        if (priv->phy_addr != FEC5200_PHYADDR_7WIRE)
                 rcntrl |= FEC_RCNTRL_MII_MODE;
 
         if (priv->duplex == DUPLEX_FULL)
@@ -864,7 +887,10 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
         struct net_device *ndev;
         struct mpc52xx_fec_priv *priv = NULL;
         struct resource mem;
-        const phandle *ph;
+        struct device_node *phy_node;
+        const phandle *phy_handle;
+        const u32 *prop;
+        int prop_size;
 
         phys_addr_t rx_fifo;
         phys_addr_t tx_fifo;
@@ -948,26 +974,37 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
                 mpc52xx_fec_get_paddr(ndev, ndev->dev_addr);
 
         priv->msg_enable = netif_msg_init(debug, MPC52xx_MESSAGES_DEFAULT);
-        priv->duplex = DUPLEX_FULL;
-
-        /* is the phy present in device tree? */
-        ph = of_get_property(op->node, "phy-handle", NULL);
-        if (ph) {
-                const unsigned int *prop;
-                struct device_node *phy_dn;
-                priv->has_phy = 1;
 
-                phy_dn = of_find_node_by_phandle(*ph);
-                prop = of_get_property(phy_dn, "reg", NULL);
-                priv->phy_addr = *prop;
+        /*
+         * Link mode configuration
+         */
 
-                of_node_put(phy_dn);
+        /* Start with safe defaults for link connection */
+        priv->phy_addr = FEC5200_PHYADDR_NONE;
+        priv->speed = 100;
+        priv->duplex = DUPLEX_HALF;
+        priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
+
+        /* the 7-wire property means don't use MII mode */
+        if (of_find_property(op->node, "fsl,7-wire-mode", NULL))
+                priv->phy_addr = FEC5200_PHYADDR_7WIRE;
+
+        /* The current speed preconfigures the speed of the MII link */
+        prop = of_get_property(op->node, "current-speed", &prop_size);
+        if (prop && (prop_size >= sizeof(u32) * 2)) {
+                priv->speed = prop[0];
+                priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF;
+        }
 
-                /* Phy speed */
-                priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
-        } else {
-                dev_info(&ndev->dev, "can't find \"phy-handle\" in device"
-                                " tree, using 7-wire mode\n");
+        /* If there is a phy handle, setup link to that phy */
+        phy_handle = of_get_property(op->node, "phy-handle", &prop_size);
+        if (phy_handle && (prop_size >= sizeof(phandle))) {
+                phy_node = of_find_node_by_phandle(*phy_handle);
+                prop = of_get_property(phy_node, "reg", &prop_size);
+                if (prop && (prop_size >= sizeof(u32)))
+                        if ((*prop >= 0) && (*prop < PHY_MAX_ADDR))
+                                priv->phy_addr = *prop;
+                of_node_put(phy_node);
         }
 
         /* Hardware init */
@@ -982,6 +1019,20 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
         if (rv < 0)
                 goto probe_error;
 
+        /* Now report the link setup */
+        switch (priv->phy_addr) {
+         case FEC5200_PHYADDR_NONE:
+                dev_info(&ndev->dev, "Fixed speed MII link: %i%cD\n",
+                         priv->speed, priv->duplex ? 'F' : 'H');
+                break;
+         case FEC5200_PHYADDR_7WIRE:
+                dev_info(&ndev->dev, "using 7-wire PHY mode\n");
+                break;
+         default:
+                dev_info(&ndev->dev, "Using PHY at MDIO address %i\n",
+                         priv->phy_addr);
+        }
+
         /* We're done ! */
         dev_set_drvdata(&op->dev, ndev);
 
diff --git a/drivers/net/fec_mpc52xx.h b/drivers/net/fec_mpc52xx.h
index 8b1f75397b9a..a227a525bdbb 100644
--- a/drivers/net/fec_mpc52xx.h
+++ b/drivers/net/fec_mpc52xx.h
@@ -26,25 +26,6 @@
 
 #define FEC_WATCHDOG_TIMEOUT    ((400*HZ)/1000)
 
-struct mpc52xx_fec_priv {
-        int duplex;
-        int r_irq;
-        int t_irq;
-        struct mpc52xx_fec __iomem *fec;
-        struct bcom_task *rx_dmatsk;
-        struct bcom_task *tx_dmatsk;
-        spinlock_t lock;
-        int msg_enable;
-
-        int has_phy;
-        unsigned int phy_speed;
-        unsigned int phy_addr;
-        struct phy_device *phydev;
-        enum phy_state link;
-        int speed;
-};
-
-
 /* ======================================================================== */
 /* Hardware register sets & bits                                            */
 /* ======================================================================== */