net: phy: Add SGMII Configuration for Marvell 88E1145 Initialization

Marvell phy 88E1145 configuration & initialization was missing a case
for initializing SGMII mode. This patch adds that case.

Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 19 insertions, 0 deletions

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index bd37e45c89c0..225c033b08f3 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -50,10 +50,15 @@
 #define MII_M1011_PHY_SCR               0x10
 #define MII_M1011_PHY_SCR_AUTO_CROSS    0x0060
 
+#define MII_M1145_PHY_EXT_SR            0x1b
 #define MII_M1145_PHY_EXT_CR            0x14
 #define MII_M1145_RGMII_RX_DELAY        0x0080
 #define MII_M1145_RGMII_TX_DELAY        0x0002
 
+#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK       0x4
+#define MII_M1145_HWCFG_MODE_MASK               0xf
+#define MII_M1145_HWCFG_FIBER_COPPER_AUTO       0x8000
+
 #define MII_M1111_PHY_LED_CONTROL       0x18
 #define MII_M1111_PHY_LED_DIRECT        0x4100
 #define MII_M1111_PHY_LED_COMBINE       0x411c
@@ -676,6 +681,20 @@ static int m88e1145_config_init(struct phy_device *phydev)
                 }
         }
 
+        if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+                int temp = phy_read(phydev, MII_M1145_PHY_EXT_SR);
+                if (temp < 0)
+                        return temp;
+
+                temp &= ~MII_M1145_HWCFG_MODE_MASK;
+                temp |= MII_M1145_HWCFG_MODE_SGMII_NO_CLK;
+                temp |= MII_M1145_HWCFG_FIBER_COPPER_AUTO;
+
+                err = phy_write(phydev, MII_M1145_PHY_EXT_SR, temp);
+                if (err < 0)
+                        return err;
+        }
+
         err = marvell_of_reg_init(phydev);
         if (err < 0)
                 return err;