Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

John W. Linville says:

====================
Please pull these fixes intended for 3.6.  There are more commits
here than I would like -- I got a bit behind while I was stalking
Steven Rostedt in San Diego last week...  I'll slow it down after this!

There are a couple of pulls here.  One is from Johannes:

"Please pull (according to the below information) to get a few fixes.

 * a fix to properly disconnect in the driver when authentication or
   association fails
 * a fix to prevent invalid information about mesh paths being reported
   to userspace
 * a memory leak fix in an nl80211 error path"

The other comes via Gustavo:

"A few updates for the 3.6 kernel. There are two btusb patches to add
more supported devices through the new USB_VENDOR_AND_INTEFACE_INFO()
macro and another one that add a new device id for a Sony Vaio laptop,
one fix for a user-after-free and, finally, two patches from Vinicius
to fix a issue in SMP pairing."

Along with those...

Arend van Spriel provides a fix for a use-after-free bug in brcmfmac.

Daniel Drake avoids a hang by not trying to touch the libertas hardware
duing suspend if it is already powered-down.

Felix Fietkau provides a batch of ath9k fixes that adress some
potential problems with power settings, as well as a fix to avoid a
potential interrupt storm.

Gertjan van Wingerde provides a register-width fix for rt2x00, and
a rt2x00 fix to prevent incorrectly detecting the rfkill status.
He also provides a device ID patch.

Hante Meuleman gives us three brcmfmac fixes, one that properly
initializes a command structure, one that fixes a race condition that
could lose usb requests, and one that removes some log spam.

Marc Kleine-Budde offers an rt2x00 fix for a voltage setting on some
specific devices.

Mohammed Shafi Shajakhan sent an ath9k fix to avoid a crash related to
using timers that aren't allocated when 2 wire bluetooth coexistence
hardware is in use.

Sergei Poselenov changes rt2800usb to do some validity checking for
received packets, avoiding crashes on an ARM Soc.

Stone Piao gives us an mwifiex fix for an incorrectly set skb length
value for a command buffer.

All of these are localized to their specific drivers, and relatively
small.  The power-related patches from Felix are bigger than I would
like, but I merged them in consideration of their isolation to ath9k
and the sensitive nature of power settings in wireless devices.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

24 files changed, 260 insertions, 53 deletions

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
index 2c9f7d7ed4cc..0ed3846f9cbb 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
@@ -142,6 +142,7 @@ static int ar9003_paprd_setup_single_table(struct ath_hw *ah)
         };
         int training_power;
         int i, val;
+        u32 am2pm_mask = ah->paprd_ratemask;
 
         if (IS_CHAN_2GHZ(ah->curchan))
                 training_power = ar9003_get_training_power_2g(ah);
@@ -158,10 +159,13 @@ static int ar9003_paprd_setup_single_table(struct ath_hw *ah)
         }
         ah->paprd_training_power = training_power;
 
+        if (AR_SREV_9330(ah))
+                am2pm_mask = 0;
+
         REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2AM, AR_PHY_PAPRD_AM2AM_MASK,
                       ah->paprd_ratemask);
         REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2PM, AR_PHY_PAPRD_AM2PM_MASK,
-                      ah->paprd_ratemask);
+                      am2pm_mask);
         REG_RMW_FIELD(ah, AR_PHY_PAPRD_HT40, AR_PHY_PAPRD_HT40_MASK,
                       ah->paprd_ratemask_ht40);
 
@@ -782,6 +786,102 @@ int ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain)
 }
 EXPORT_SYMBOL(ar9003_paprd_setup_gain_table);
 
+static bool ar9003_paprd_retrain_pa_in(struct ath_hw *ah,
+                                       struct ath9k_hw_cal_data *caldata,
+                                       int chain)
+{
+        u32 *pa_in = caldata->pa_table[chain];
+        int capdiv_offset, quick_drop_offset;
+        int capdiv2g, quick_drop;
+        int count = 0;
+        int i;
+
+        if (!AR_SREV_9485(ah) && !AR_SREV_9330(ah))
+                return false;
+
+        capdiv2g = REG_READ_FIELD(ah, AR_PHY_65NM_CH0_TXRF3,
+                                  AR_PHY_65NM_CH0_TXRF3_CAPDIV2G);
+
+        quick_drop = REG_READ_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
+                                    AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP);
+
+        if (quick_drop)
+                quick_drop -= 0x40;
+
+        for (i = 0; i < NUM_BIN + 1; i++) {
+                if (pa_in[i] == 1400)
+                        count++;
+        }
+
+        if (AR_SREV_9485(ah)) {
+                if (pa_in[23] < 800) {
+                        capdiv_offset = (int)((1000 - pa_in[23] + 75) / 150);
+                        capdiv2g += capdiv_offset;
+                        if (capdiv2g > 7) {
+                                capdiv2g = 7;
+                                if (pa_in[23] < 600) {
+                                        quick_drop++;
+                                        if (quick_drop > 0)
+                                                quick_drop = 0;
+                                }
+                        }
+                } else if (pa_in[23] == 1400) {
+                        quick_drop_offset = min_t(int, count / 3, 2);
+                        quick_drop += quick_drop_offset;
+                        capdiv2g += quick_drop_offset / 2;
+
+                        if (capdiv2g > 7)
+                                capdiv2g = 7;
+
+                        if (quick_drop > 0) {
+                                quick_drop = 0;
+                                capdiv2g -= quick_drop_offset;
+                                if (capdiv2g < 0)
+                                        capdiv2g = 0;
+                        }
+                } else {
+                        return false;
+                }
+        } else if (AR_SREV_9330(ah)) {
+                if (pa_in[23] < 1000) {
+                        capdiv_offset = (1000 - pa_in[23]) / 100;
+                        capdiv2g += capdiv_offset;
+                        if (capdiv_offset > 3) {
+                                capdiv_offset = 1;
+                                quick_drop--;
+                        }
+
+                        capdiv2g += capdiv_offset;
+                        if (capdiv2g > 6)
+                                capdiv2g = 6;
+                        if (quick_drop < -4)
+                                quick_drop = -4;
+                } else if (pa_in[23] == 1400) {
+                        if (count > 3) {
+                                quick_drop++;
+                                capdiv2g -= count / 4;
+                                if (quick_drop > -2)
+                                        quick_drop = -2;
+                        } else {
+                                capdiv2g--;
+                        }
+
+                        if (capdiv2g < 0)
+                                capdiv2g = 0;
+                } else {
+                        return false;
+                }
+        }
+
+        REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_TXRF3,
+                      AR_PHY_65NM_CH0_TXRF3_CAPDIV2G, capdiv2g);
+        REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
+                      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP,
+                      quick_drop);
+
+        return true;
+}
+
 int ar9003_paprd_create_curve(struct ath_hw *ah,
                               struct ath9k_hw_cal_data *caldata, int chain)
 {
@@ -817,6 +917,9 @@ int ar9003_paprd_create_curve(struct ath_hw *ah,
         if (!create_pa_curve(data_L, data_U, pa_table, small_signal_gain))
                 status = -2;
 
+        if (ar9003_paprd_retrain_pa_in(ah, caldata, chain))
+                status = -EINPROGRESS;
+
         REG_CLR_BIT(ah, AR_PHY_PAPRD_TRAINER_STAT1,
                     AR_PHY_PAPRD_TRAINER_STAT1_PAPRD_TRAIN_DONE);
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 7bfbaf065a43..84d3d4956861 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -625,6 +625,10 @@
 #define AR_PHY_AIC_CTRL_4_B0    (AR_SM_BASE + 0x4c0)
 #define AR_PHY_AIC_STAT_2_B0    (AR_SM_BASE + 0x4cc)
 
+#define AR_PHY_65NM_CH0_TXRF3       0x16048
+#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G          0x0000001e
+#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G_S        1
+
 #define AR_PHY_65NM_CH0_SYNTH4      0x1608c
 #define AR_PHY_SYNTH4_LONG_SHIFT_SELECT   (AR_SREV_9462(ah) ? 0x00000001 : 0x00000002)
 #define AR_PHY_SYNTH4_LONG_SHIFT_SELECT_S (AR_SREV_9462(ah) ? 0 : 1)
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index bacdb8fb4ef4..9f83f71742a5 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -341,7 +341,8 @@ void ath9k_btcoex_stop_gen_timer(struct ath_softc *sc)
 {
         struct ath_btcoex *btcoex = &sc->btcoex;
 
-        ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
+        if (btcoex->hw_timer_enabled)
+                ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
 }
 
 u16 ath9k_btcoex_aggr_limit(struct ath_softc *sc, u32 max_4ms_framelen)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 60b6a9daff7e..48af40151d23 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -463,9 +463,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
                 ah->config.spurchans[i][1] = AR_NO_SPUR;
         }
 
-        /* PAPRD needs some more work to be enabled */
-        ah->config.paprd_disable = 1;
-
         ah->config.rx_intr_mitigation = true;
         ah->config.pcieSerDesWrite = true;
 
@@ -978,9 +975,6 @@ static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
         else
                 imr_reg |= AR_IMR_TXOK;
 
-        if (opmode == NL80211_IFTYPE_AP)
-                imr_reg |= AR_IMR_MIB;
-
         ENABLE_REGWRITE_BUFFER(ah);
 
         REG_WRITE(ah, AR_IMR, imr_reg);
@@ -1778,6 +1772,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
                 /* Operating channel changed, reset channel calibration data */
                 memset(caldata, 0, sizeof(*caldata));
                 ath9k_init_nfcal_hist_buffer(ah, chan);
+        } else if (caldata) {
+                caldata->paprd_packet_sent = false;
         }
         ah->noise = ath9k_hw_getchan_noise(ah, chan);
 
@@ -2502,7 +2498,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
                 pCap->tx_desc_len = sizeof(struct ar9003_txc);
                 pCap->txs_len = sizeof(struct ar9003_txs);
                 if (!ah->config.paprd_disable &&
-                    ah->eep_ops->get_eeprom(ah, EEP_PAPRD))
+                    ah->eep_ops->get_eeprom(ah, EEP_PAPRD) &&
+                    !AR_SREV_9462(ah))
                         pCap->hw_caps |= ATH9K_HW_CAP_PAPRD;
         } else {
                 pCap->tx_desc_len = sizeof(struct ath_desc);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index ce7332c64efb..6599a75f01fe 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -405,6 +405,7 @@ struct ath9k_hw_cal_data {
         int8_t iCoff;
         int8_t qCoff;
         bool rtt_done;
+        bool paprd_packet_sent;
         bool paprd_done;
         bool nfcal_pending;
         bool nfcal_interference;
diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c
index d4549e9aac5c..825a29cc9313 100644
--- a/drivers/net/wireless/ath/ath9k/link.c
+++ b/drivers/net/wireless/ath/ath9k/link.c
@@ -254,8 +254,9 @@ void ath_paprd_calibrate(struct work_struct *work)
         int chain_ok = 0;
         int chain;
         int len = 1800;
+        int ret;
 
-        if (!caldata)
+        if (!caldata || !caldata->paprd_packet_sent || caldata->paprd_done)
                 return;
 
         ath9k_ps_wakeup(sc);
@@ -282,13 +283,6 @@ void ath_paprd_calibrate(struct work_struct *work)
                         continue;
 
                 chain_ok = 0;
-
-                ath_dbg(common, CALIBRATE,
-                        "Sending PAPRD frame for thermal measurement on chain %d\n",
-                        chain);
-                if (!ath_paprd_send_frame(sc, skb, chain))
-                        goto fail_paprd;
-
                 ar9003_paprd_setup_gain_table(ah, chain);
 
                 ath_dbg(common, CALIBRATE,
@@ -302,7 +296,13 @@ void ath_paprd_calibrate(struct work_struct *work)
                         break;
                 }
 
-                if (ar9003_paprd_create_curve(ah, caldata, chain)) {
+                ret = ar9003_paprd_create_curve(ah, caldata, chain);
+                if (ret == -EINPROGRESS) {
+                        ath_dbg(common, CALIBRATE,
+                                "PAPRD curve on chain %d needs to be re-trained\n",
+                                chain);
+                        break;
+                } else if (ret) {
                         ath_dbg(common, CALIBRATE,
                                 "PAPRD create curve failed on chain %d\n",
                                 chain);
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 2c9da6b2ecb1..0d4155aec48d 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2018,6 +2018,9 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 
         ath_dbg(common, XMIT, "TX complete: skb: %p\n", skb);
 
+        if (sc->sc_ah->caldata)
+                sc->sc_ah->caldata->paprd_packet_sent = true;
+
         if (!(tx_flags & ATH_TX_ERROR))
                 /* Frame was ACKed */
                 tx_info->flags |= IEEE80211_TX_STAT_ACK;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index a299d42da8e7..58f89fa9c9f8 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -519,7 +519,7 @@ static void brcmf_usb_tx_complete(struct urb *urb)
         else
                 devinfo->bus_pub.bus->dstats.tx_errors++;
 
-        dev_kfree_skb(req->skb);
+        brcmu_pkt_buf_free_skb(req->skb);
         req->skb = NULL;
         brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req);
 
@@ -540,7 +540,7 @@ static void brcmf_usb_rx_complete(struct urb *urb)
                 devinfo->bus_pub.bus->dstats.rx_packets++;
         } else {
                 devinfo->bus_pub.bus->dstats.rx_errors++;
-                dev_kfree_skb(skb);
+                brcmu_pkt_buf_free_skb(skb);
                 brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
                 return;
         }
@@ -550,13 +550,15 @@ static void brcmf_usb_rx_complete(struct urb *urb)
                 if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) {
                         brcmf_dbg(ERROR, "rx protocol error\n");
                         brcmu_pkt_buf_free_skb(skb);
+                        brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
                         devinfo->bus_pub.bus->dstats.rx_errors++;
                 } else {
                         brcmf_rx_packet(devinfo->dev, ifidx, skb);
                         brcmf_usb_rx_refill(devinfo, req);
                 }
         } else {
-                dev_kfree_skb(skb);
+                brcmu_pkt_buf_free_skb(skb);
+                brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
         }
         return;
 
@@ -581,14 +583,13 @@ static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
         usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->rx_pipe,
                           skb->data, skb_tailroom(skb), brcmf_usb_rx_complete,
                           req);
-        req->urb->transfer_flags |= URB_ZERO_PACKET;
         req->devinfo = devinfo;
+        brcmf_usb_enq(devinfo, &devinfo->rx_postq, req);
 
         ret = usb_submit_urb(req->urb, GFP_ATOMIC);
-        if (ret == 0) {
-                brcmf_usb_enq(devinfo, &devinfo->rx_postq, req);
-        } else {
-                dev_kfree_skb(req->skb);
+        if (ret) {
+                brcmf_usb_del_fromq(devinfo, req);
+                brcmu_pkt_buf_free_skb(req->skb);
                 req->skb = NULL;
                 brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req);
         }
@@ -683,23 +684,22 @@ static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
 
         req = brcmf_usb_deq(devinfo, &devinfo->tx_freeq);
         if (!req) {
+                brcmu_pkt_buf_free_skb(skb);
                 brcmf_dbg(ERROR, "no req to send\n");
                 return -ENOMEM;
         }
-        if (!req->urb) {
-                brcmf_dbg(ERROR, "no urb for req %p\n", req);
-                return -ENOBUFS;
-        }
 
         req->skb = skb;
         req->devinfo = devinfo;
         usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->tx_pipe,
                           skb->data, skb->len, brcmf_usb_tx_complete, req);
         req->urb->transfer_flags |= URB_ZERO_PACKET;
+        brcmf_usb_enq(devinfo, &devinfo->tx_postq, req);
         ret = usb_submit_urb(req->urb, GFP_ATOMIC);
-        if (!ret) {
-                brcmf_usb_enq(devinfo, &devinfo->tx_postq, req);
-        } else {
+        if (ret) {
+                brcmf_dbg(ERROR, "brcmf_usb_tx usb_submit_urb FAILED\n");
+                brcmf_usb_del_fromq(devinfo, req);
+                brcmu_pkt_buf_free_skb(req->skb);
                 req->skb = NULL;
                 brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req);
         }
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 28c5fbb4af26..c36e92312443 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -1876,16 +1876,17 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
         }
 
         if (test_bit(WL_STATUS_CONNECTED, &cfg_priv->status)) {
-                scb_val.val = cpu_to_le32(0);
+                memset(&scb_val, 0, sizeof(scb_val));
                 err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_RSSI, &scb_val,
                                       sizeof(struct brcmf_scb_val_le));
-                if (err)
+                if (err) {
                         WL_ERR("Could not get rssi (%d)\n", err);
-
-                rssi = le32_to_cpu(scb_val.val);
-                sinfo->filled |= STATION_INFO_SIGNAL;
-                sinfo->signal = rssi;
-                WL_CONN("RSSI %d dBm\n", rssi);
+                } else {
+                        rssi = le32_to_cpu(scb_val.val);
+                        sinfo->filled |= STATION_INFO_SIGNAL;
+                        sinfo->signal = rssi;
+                        WL_CONN("RSSI %d dBm\n", rssi);
+                }
         }
 
 done:
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index e970897f6ab5..4cb234349fbf 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -1326,6 +1326,11 @@ static int if_sdio_suspend(struct device *dev)
 
         mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
 
+        /* If we're powered off anyway, just let the mmc layer remove the
+         * card. */
+        if (!lbs_iface_active(card->priv))
+                return -ENOSYS;
+
         dev_info(dev, "%s: suspend: PM flags = 0x%x\n",
                  sdio_func_id(func), flags);
 
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index c68adec3cc8b..565527aee0ea 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -170,7 +170,20 @@ static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv,
         cmd_code = le16_to_cpu(host_cmd->command);
         cmd_size = le16_to_cpu(host_cmd->size);
 
-        skb_trim(cmd_node->cmd_skb, cmd_size);
+        /* Adjust skb length */
+        if (cmd_node->cmd_skb->len > cmd_size)
+                /*
+                 * cmd_size is less than sizeof(struct host_cmd_ds_command).
+                 * Trim off the unused portion.
+                 */
+                skb_trim(cmd_node->cmd_skb, cmd_size);
+        else if (cmd_node->cmd_skb->len < cmd_size)
+                /*
+                 * cmd_size is larger than sizeof(struct host_cmd_ds_command)
+                 * because we have appended custom IE TLV. Increase skb length
+                 * accordingly.
+                 */
+                skb_put(cmd_node->cmd_skb, cmd_size - cmd_node->cmd_skb->len);
 
         do_gettimeofday(&tstamp);
         dev_dbg(adapter->dev, "cmd: DNLD_CMD: (%lu.%lu): %#x, act %#x, len %d,"
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 8b9dbd76a252..64328af496f5 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1611,6 +1611,7 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
         int retval;
+        u32 reg;
 
         /*
          * Allocate eeprom data.
@@ -1624,6 +1625,14 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
                 return retval;
 
         /*
+         * Enable rfkill polling by setting GPIO direction of the
+         * rfkill switch GPIO pin correctly.
+         */
+        rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
+        rt2x00_set_field32(&reg, GPIOCSR_BIT8, 1);
+        rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
+        /*
          * Initialize hw specifications.
          */
         retval = rt2400pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index d3a4a68cc439..7564ae992b73 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -670,6 +670,7 @@
 #define GPIOCSR_BIT5                    FIELD32(0x00000020)
 #define GPIOCSR_BIT6                    FIELD32(0x00000040)
 #define GPIOCSR_BIT7                    FIELD32(0x00000080)
+#define GPIOCSR_BIT8                    FIELD32(0x00000100)
 
 /*
  * BBPPCSR: BBP Pin control register.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index d2cf8a4bc8b5..3de0406735f6 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1929,6 +1929,7 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
         int retval;
+        u32 reg;
 
         /*
          * Allocate eeprom data.
@@ -1942,6 +1943,14 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
                 return retval;
 
         /*
+         * Enable rfkill polling by setting GPIO direction of the
+         * rfkill switch GPIO pin correctly.
+         */
+        rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
+        rt2x00_set_field32(&reg, GPIOCSR_DIR0, 1);
+        rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
+        /*
          * Initialize hw specifications.
          */
         retval = rt2500pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 3aae36bb0a9e..89fee311d8fd 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -283,7 +283,7 @@ static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
         u16 reg;
 
         rt2500usb_register_read(rt2x00dev, MAC_CSR19, &reg);
-        return rt2x00_get_field32(reg, MAC_CSR19_BIT7);
+        return rt2x00_get_field16(reg, MAC_CSR19_BIT7);
 }
 
 #ifdef CONFIG_RT2X00_LIB_LEDS
@@ -1768,6 +1768,7 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
         int retval;
+        u16 reg;
 
         /*
          * Allocate eeprom data.
@@ -1781,6 +1782,14 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
                 return retval;
 
         /*
+         * Enable rfkill polling by setting GPIO direction of the
+         * rfkill switch GPIO pin correctly.
+         */
+        rt2500usb_register_read(rt2x00dev, MAC_CSR19, &reg);
+        rt2x00_set_field16(&reg, MAC_CSR19_BIT8, 0);
+        rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg);
+
+        /*
          * Initialize hw specifications.
          */
         retval = rt2500usb_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index b493306a7eed..196bd5103e4f 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -189,14 +189,15 @@
  * MAC_CSR19: GPIO control register.
  */
 #define MAC_CSR19                       0x0426
-#define MAC_CSR19_BIT0                  FIELD32(0x0001)
-#define MAC_CSR19_BIT1                  FIELD32(0x0002)
-#define MAC_CSR19_BIT2                  FIELD32(0x0004)
-#define MAC_CSR19_BIT3                  FIELD32(0x0008)
-#define MAC_CSR19_BIT4                  FIELD32(0x0010)
-#define MAC_CSR19_BIT5                  FIELD32(0x0020)
-#define MAC_CSR19_BIT6                  FIELD32(0x0040)
-#define MAC_CSR19_BIT7                  FIELD32(0x0080)
+#define MAC_CSR19_BIT0                  FIELD16(0x0001)
+#define MAC_CSR19_BIT1                  FIELD16(0x0002)
+#define MAC_CSR19_BIT2                  FIELD16(0x0004)
+#define MAC_CSR19_BIT3                  FIELD16(0x0008)
+#define MAC_CSR19_BIT4                  FIELD16(0x0010)
+#define MAC_CSR19_BIT5                  FIELD16(0x0020)
+#define MAC_CSR19_BIT6                  FIELD16(0x0040)
+#define MAC_CSR19_BIT7                  FIELD16(0x0080)
+#define MAC_CSR19_BIT8                  FIELD16(0x0100)
 
 /*
  * MAC_CSR20: LED control register.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index cb8c2aca54e4..b93516d832fb 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4089,6 +4089,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
                 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
                 msleep(1);
                 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
+                rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
                 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
                 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
         }
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 98aa426a3564..4765bbd654cd 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -983,6 +983,7 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
         int retval;
+        u32 reg;
 
         /*
          * Allocate eeprom data.
@@ -996,6 +997,14 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
                 return retval;
 
         /*
+         * Enable rfkill polling by setting GPIO direction of the
+         * rfkill switch GPIO pin correctly.
+         */
+        rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+        rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+        rt2x00pci_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
+        /*
          * Initialize hw specifications.
          */
         retval = rt2800_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 6cf336595e25..6b4226b71618 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -667,8 +667,16 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
         skb_pull(entry->skb, RXINFO_DESC_SIZE);
 
         /*
-         * FIXME: we need to check for rx_pkt_len validity
+         * Check for rx_pkt_len validity. Return if invalid, leaving
+         * rxdesc->size zeroed out by the upper level.
          */
+        if (unlikely(rx_pkt_len == 0 ||
+                        rx_pkt_len > entry->queue->data_size)) {
+                ERROR(entry->queue->rt2x00dev,
+                        "Bad frame size %d, forcing to 0\n", rx_pkt_len);
+                return;
+        }
+
         rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
 
         /*
@@ -736,6 +744,7 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
         int retval;
+        u32 reg;
 
         /*
          * Allocate eeprom data.
@@ -749,6 +758,14 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
                 return retval;
 
         /*
+         * Enable rfkill polling by setting GPIO direction of the
+         * rfkill switch GPIO pin correctly.
+         */
+        rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+        rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+        rt2x00usb_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
+        /*
          * Initialize hw specifications.
          */
         retval = rt2800_probe_hw_mode(rt2x00dev);
@@ -1157,6 +1174,8 @@ static struct usb_device_id rt2800usb_device_table[] = {
         { USB_DEVICE(0x1690, 0x0744) },
         { USB_DEVICE(0x1690, 0x0761) },
         { USB_DEVICE(0x1690, 0x0764) },
+        /* ASUS */
+        { USB_DEVICE(0x0b05, 0x179d) },
         /* Cisco */
         { USB_DEVICE(0x167b, 0x4001) },
         /* EnGenius */
@@ -1222,7 +1241,6 @@ static struct usb_device_id rt2800usb_device_table[] = {
         { USB_DEVICE(0x0b05, 0x1760) },
         { USB_DEVICE(0x0b05, 0x1761) },
         { USB_DEVICE(0x0b05, 0x1790) },
-        { USB_DEVICE(0x0b05, 0x179d) },
         /* AzureWave */
         { USB_DEVICE(0x13d3, 0x3262) },
         { USB_DEVICE(0x13d3, 0x3284) },
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index a6b88bd4a1a5..3f07e36f462b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -629,7 +629,7 @@ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp)
          */
         if (unlikely(rxdesc.size == 0 ||
                      rxdesc.size > entry->queue->data_size)) {
-                WARNING(rt2x00dev, "Wrong frame size %d max %d.\n",
+                ERROR(rt2x00dev, "Wrong frame size %d max %d.\n",
                         rxdesc.size, entry->queue->data_size);
                 dev_kfree_skb(entry->skb);
                 goto renew_skb;
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 3f7bc5cadf9a..b8ec96163922 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2832,6 +2832,7 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
         int retval;
+        u32 reg;
 
         /*
          * Disable power saving.
@@ -2850,6 +2851,14 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
                 return retval;
 
         /*
+         * Enable rfkill polling by setting GPIO direction of the
+         * rfkill switch GPIO pin correctly.
+         */
+        rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
+        rt2x00_set_field32(&reg, MAC_CSR13_BIT13, 1);
+        rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
+
+        /*
          * Initialize hw specifications.
          */
         retval = rt61pci_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index e3cd6db76b0e..8f3da5a56766 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -372,6 +372,7 @@ struct hw_pairwise_ta_entry {
 #define MAC_CSR13_BIT10                 FIELD32(0x00000400)
 #define MAC_CSR13_BIT11                 FIELD32(0x00000800)
 #define MAC_CSR13_BIT12                 FIELD32(0x00001000)
+#define MAC_CSR13_BIT13                 FIELD32(0x00002000)
 
 /*
  * MAC_CSR14: LED control register.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index ba6e434b859d..248436c13ce0 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2177,6 +2177,7 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
         int retval;
+        u32 reg;
 
         /*
          * Allocate eeprom data.
@@ -2190,6 +2191,14 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
                 return retval;
 
         /*
+         * Enable rfkill polling by setting GPIO direction of the
+         * rfkill switch GPIO pin correctly.
+         */
+        rt2x00usb_register_read(rt2x00dev, MAC_CSR13, &reg);
+        rt2x00_set_field32(&reg, MAC_CSR13_BIT15, 0);
+        rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg);
+
+        /*
          * Initialize hw specifications.
          */
         retval = rt73usb_probe_hw_mode(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 9f6b470414d3..df1cc116b83b 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -282,6 +282,9 @@ struct hw_pairwise_ta_entry {
 #define MAC_CSR13_BIT10                 FIELD32(0x00000400)
 #define MAC_CSR13_BIT11                 FIELD32(0x00000800)
 #define MAC_CSR13_BIT12                 FIELD32(0x00001000)
+#define MAC_CSR13_BIT13                 FIELD32(0x00002000)
+#define MAC_CSR13_BIT14                 FIELD32(0x00004000)
+#define MAC_CSR13_BIT15                 FIELD32(0x00008000)
 
 /*
  * MAC_CSR14: LED control register.