Merge branch 'wip-2.6.34' into old-private-masterarchived-private-master

1 files changed, 39 insertions, 40 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 2e872ac69826..2a73f593aab0 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1,5 +1,5 @@
 /*
-        Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+        Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
         <http://rt2x00.serialmonkey.com>
 
         This program is free software; you can redistribute it and/or modify
@@ -31,6 +31,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/eeprom_93cx6.h>
+#include <linux/slab.h>
 
 #include "rt2x00.h"
 #include "rt2x00pci.h"
@@ -440,8 +441,7 @@ static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev,
         /*
          * RT2525E and RT5222 need to flip TX I/Q
          */
-        if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
-            rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+        if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) {
                 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
                 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 1);
                 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 1);
@@ -449,7 +449,7 @@ static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev,
                 /*
                  * RT2525E does not need RX I/Q Flip.
                  */
-                if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
+                if (rt2x00_rf(rt2x00dev, RF2525E))
                         rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
         } else {
                 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 0);
@@ -475,14 +475,14 @@ static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
          * Switch on tuning bits.
          * For RT2523 devices we do not need to update the R1 register.
          */
-        if (!rt2x00_rf(&rt2x00dev->chip, RF2523))
+        if (!rt2x00_rf(rt2x00dev, RF2523))
                 rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
 
         /*
          * For RT2525 we should first set the channel to half band higher.
          */
-        if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+        if (rt2x00_rf(rt2x00dev, RF2525)) {
                 static const u32 vals[] = {
                         0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
                         0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
@@ -516,7 +516,7 @@ static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
          * Switch off tuning bits.
          * For RT2523 devices we do not need to update the R1 register.
          */
-        if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+        if (!rt2x00_rf(rt2x00dev, RF2523)) {
                 rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
                 rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
         }
@@ -640,7 +640,7 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev,
          * up to version C the link tuning should halt after 20
          * seconds while being associated.
          */
-        if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
+        if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D &&
             rt2x00dev->intf_associated && count > 20)
                 return;
 
@@ -650,7 +650,7 @@ static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev,
          * should go straight to dynamic CCA tuning when they
          * are not associated.
          */
-        if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D ||
+        if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D ||
             !rt2x00dev->intf_associated)
                 goto dynamic_cca_tune;
 
@@ -1504,14 +1504,15 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
          */
         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
         rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
-        rt2x00_set_chip_rf(rt2x00dev, value, reg);
-
-        if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
-            !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
-            !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
-            !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
-            !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
-            !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+        rt2x00_set_chip(rt2x00dev, RT2560, value,
+                        rt2x00_get_field32(reg, CSR0_REVISION));
+
+        if (!rt2x00_rf(rt2x00dev, RF2522) &&
+            !rt2x00_rf(rt2x00dev, RF2523) &&
+            !rt2x00_rf(rt2x00dev, RF2524) &&
+            !rt2x00_rf(rt2x00dev, RF2525) &&
+            !rt2x00_rf(rt2x00dev, RF2525E) &&
+            !rt2x00_rf(rt2x00dev, RF5222)) {
                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
                 return -ENODEV;
         }
@@ -1732,8 +1733,6 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
                                IEEE80211_HW_SUPPORTS_PS |
                                IEEE80211_HW_PS_NULLFUNC_STACK;
 
-        rt2x00dev->hw->extra_tx_headroom = 0;
-
         SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
                                 rt2x00_eeprom_addr(rt2x00dev,
@@ -1745,22 +1744,22 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
         spec->supported_bands = SUPPORT_BAND_2GHZ;
         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
 
-        if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
+        if (rt2x00_rf(rt2x00dev, RF2522)) {
                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
                 spec->channels = rf_vals_bg_2522;
-        } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+        } else if (rt2x00_rf(rt2x00dev, RF2523)) {
                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
                 spec->channels = rf_vals_bg_2523;
-        } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
+        } else if (rt2x00_rf(rt2x00dev, RF2524)) {
                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
                 spec->channels = rf_vals_bg_2524;
-        } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+        } else if (rt2x00_rf(rt2x00dev, RF2525)) {
                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
                 spec->channels = rf_vals_bg_2525;
-        } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+        } else if (rt2x00_rf(rt2x00dev, RF2525E)) {
                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
                 spec->channels = rf_vals_bg_2525e;
-        } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+        } else if (rt2x00_rf(rt2x00dev, RF5222)) {
                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
                 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
                 spec->channels = rf_vals_5222;
@@ -1861,7 +1860,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
         .get_stats              = rt2x00mac_get_stats,
         .bss_info_changed       = rt2x00mac_bss_info_changed,
         .conf_tx                = rt2x00mac_conf_tx,
-        .get_tx_stats           = rt2x00mac_get_tx_stats,
         .get_tsf                = rt2500pci_get_tsf,
         .tx_last_beacon         = rt2500pci_tx_last_beacon,
         .rfkill_poll            = rt2x00mac_rfkill_poll,
@@ -1921,27 +1919,28 @@ static const struct data_queue_desc rt2500pci_queue_atim = {
 };
 
 static const struct rt2x00_ops rt2500pci_ops = {
-        .name           = KBUILD_MODNAME,
-        .max_sta_intf   = 1,
-        .max_ap_intf    = 1,
-        .eeprom_size    = EEPROM_SIZE,
-        .rf_size        = RF_SIZE,
-        .tx_queues      = NUM_TX_QUEUES,
-        .rx             = &rt2500pci_queue_rx,
-        .tx             = &rt2500pci_queue_tx,
-        .bcn            = &rt2500pci_queue_bcn,
-        .atim           = &rt2500pci_queue_atim,
-        .lib            = &rt2500pci_rt2x00_ops,
-        .hw             = &rt2500pci_mac80211_ops,
+        .name                   = KBUILD_MODNAME,
+        .max_sta_intf           = 1,
+        .max_ap_intf            = 1,
+        .eeprom_size            = EEPROM_SIZE,
+        .rf_size                = RF_SIZE,
+        .tx_queues              = NUM_TX_QUEUES,
+        .extra_tx_headroom      = 0,
+        .rx                     = &rt2500pci_queue_rx,
+        .tx                     = &rt2500pci_queue_tx,
+        .bcn                    = &rt2500pci_queue_bcn,
+        .atim                   = &rt2500pci_queue_atim,
+        .lib                    = &rt2500pci_rt2x00_ops,
+        .hw                     = &rt2500pci_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-        .debugfs        = &rt2500pci_rt2x00debug,
+        .debugfs                = &rt2500pci_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
 /*
  * RT2500pci module information.
  */
-static struct pci_device_id rt2500pci_device_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(rt2500pci_device_table) = {
         { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
         { 0, }
 };