Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Here is my initial pull request for the networking subsystem during
  this merge window:

   1) Support for ESN in AH (RFC 4302) from Fan Du.

   2) Add full kernel doc for ethtool command structures, from Ben
      Hutchings.

   3) Add BCM7xxx PHY driver, from Florian Fainelli.

   4) Export computed TCP rate information in netlink socket dumps, from
      Eric Dumazet.

   5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
      Dichtel.

   6) Convert many drivers to pci_enable_msix_range(), from Alexander
      Gordeev.

   7) Record SKB timestamps more efficiently, from Eric Dumazet.

   8) Switch to microsecond resolution for TCP round trip times, also
      from Eric Dumazet.

   9) Clean up and fix 6lowpan fragmentation handling by making use of
      the existing inet_frag api for it's implementation.

  10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.

  11) Auto size SKB lengths when composing netlink messages based upon
      past message sizes used, from Eric Dumazet.

  12) qdisc dumps can take a long time, add a cond_resched(), From Eric
      Dumazet.

  13) Sanitize netpoll core and drivers wrt.  SKB handling semantics.
      Get rid of never-used-in-tree netpoll RX handling.  From Eric W
      Biederman.

  14) Support inter-address-family and namespace changing in VTI tunnel
      driver(s).  From Steffen Klassert.

  15) Add Altera TSE driver, from Vince Bridgers.

  16) Optimizing csum_replace2() so that it doesn't adjust the checksum
      by checksumming the entire header, from Eric Dumazet.

  17) Expand BPF internal implementation for faster interpreting, more
      direct translations into JIT'd code, and much cleaner uses of BPF
      filtering in non-socket ocntexts.  From Daniel Borkmann and Alexei
      Starovoitov"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
  netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
  net: Add a test to see if a skb is freeable in irq context
  qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
  net: ptp: move PTP classifier in its own file
  net: sxgbe: make "core_ops" static
  net: sxgbe: fix logical vs bitwise operation
  net: sxgbe: sxgbe_mdio_register() frees the bus
  Call efx_set_channels() before efx->type->dimension_resources()
  xen-netback: disable rogue vif in kthread context
  net/mlx4: Set proper build dependancy with vxlan
  be2net: fix build dependency on VxLAN
  mac802154: make csma/cca parameters per-wpan
  mac802154: allow only one WPAN to be up at any given time
  net: filter: minor: fix kdoc in __sk_run_filter
  netlink: don't compare the nul-termination in nla_strcmp
  can: c_can: Avoid led toggling for every packet.
  can: c_can: Simplify TX interrupt cleanup
  can: c_can: Store dlc private
  can: c_can: Reduce register access
  can: c_can: Make the code readable
  ...

1 files changed, 36 insertions, 30 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 9d325516c42d..fe129c94ae3e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -139,6 +139,13 @@
 #define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
 
 /*
+ * CSR HW resources monitor registers
+ */
+#define CSR_MONITOR_CFG_REG             (CSR_BASE+0x214)
+#define CSR_MONITOR_STATUS_REG          (CSR_BASE+0x228)
+#define CSR_MONITOR_XTAL_RESOURCES      (0x00000010)
+
+/*
  * CSR Hardware Revision Workaround Register.  Indicates hardware rev;
  * "step" determines CCK backoff for txpower calculation.  Used for 4965 only.
  * See also CSR_HW_REV register.
@@ -173,6 +180,7 @@
 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY      (0x00400000) /* PCI_OWN_SEM */
 #define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
 #define CSR_HW_IF_CONFIG_REG_PREPARE              (0x08000000) /* WAKE_ME */
+#define CSR_HW_IF_CONFIG_REG_PERSIST_MODE         (0x40000000) /* PERSISTENCE */
 
 #define CSR_INT_PERIODIC_DIS                    (0x00) /* disable periodic int*/
 #define CSR_INT_PERIODIC_ENA                    (0xFF) /* 255*32 usec ~ 8 msec*/
@@ -240,6 +248,7 @@
  *         001 -- MAC power-down
  *         010 -- PHY (radio) power-down
  *         011 -- Error
+ *    10:  XTAL ON request
  *   9-6:  SYS_CONFIG
  *         Indicates current system configuration, reflecting pins on chip
  *         as forced high/low by device circuit board.
@@ -271,6 +280,7 @@
 #define CSR_GP_CNTRL_REG_FLAG_INIT_DONE              (0x00000004)
 #define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ         (0x00000008)
 #define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP         (0x00000010)
+#define CSR_GP_CNTRL_REG_FLAG_XTAL_ON                (0x00000400)
 
 #define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN           (0x00000001)
 
@@ -395,37 +405,33 @@
 #define CSR_DRAM_INT_TBL_ENABLE         (1 << 31)
 #define CSR_DRAM_INIT_TBL_WRAP_CHECK    (1 << 27)
 
-/* SECURE boot registers */
-#define CSR_SECURE_BOOT_CONFIG_ADDR     (0x100)
-enum secure_boot_config_reg {
-        CSR_SECURE_BOOT_CONFIG_INSPECTOR_BURNED_IN_OTP  = 0x00000001,
-        CSR_SECURE_BOOT_CONFIG_INSPECTOR_NOT_REQ        = 0x00000002,
-};
-
-#define CSR_SECURE_BOOT_CPU1_STATUS_ADDR        (0x100)
-#define CSR_SECURE_BOOT_CPU2_STATUS_ADDR        (0x100)
-enum secure_boot_status_reg {
-        CSR_SECURE_BOOT_CPU_STATUS_VERF_STATUS          = 0x00000003,
-        CSR_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED       = 0x00000002,
-        CSR_SECURE_BOOT_CPU_STATUS_VERF_SUCCESS         = 0x00000004,
-        CSR_SECURE_BOOT_CPU_STATUS_VERF_FAIL            = 0x00000008,
-        CSR_SECURE_BOOT_CPU_STATUS_SIGN_VERF_FAIL       = 0x00000010,
-};
-
-#define CSR_UCODE_LOAD_STATUS_ADDR      (0x100)
-enum secure_load_status_reg {
-        CSR_CPU_STATUS_LOADING_STARTED                  = 0x00000001,
-        CSR_CPU_STATUS_LOADING_COMPLETED                = 0x00000002,
-        CSR_CPU_STATUS_NUM_OF_LAST_COMPLETED            = 0x000000F8,
-        CSR_CPU_STATUS_NUM_OF_LAST_LOADED_BLOCK         = 0x0000FF00,
-};
-
-#define CSR_SECURE_INSPECTOR_CODE_ADDR  (0x100)
-#define CSR_SECURE_INSPECTOR_DATA_ADDR  (0x100)
-
-#define CSR_SECURE_TIME_OUT     (100)
+/*
+ * SHR target access (Shared block memory space)
+ *
+ * Shared internal registers can be accessed directly from PCI bus through SHR
+ * arbiter without need for the MAC HW to be powered up. This is possible due to
+ * indirect read/write via HEEP_CTRL_WRD_PCIEX_CTRL (0xEC) and
+ * HEEP_CTRL_WRD_PCIEX_DATA (0xF4) registers.
+ *
+ * Use iwl_write32()/iwl_read32() family to access these registers. The MAC HW
+ * need not be powered up so no "grab inc access" is required.
+ */
 
-#define FH_TCSR_0_REG0 (0x1D00)
+/*
+ * Registers for accessing shared registers (e.g. SHR_APMG_GP1,
+ * SHR_APMG_XTAL_CFG). For example, to read from SHR_APMG_GP1 register (0x1DC),
+ * first, write to the control register:
+ * HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register)
+ * HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 2 (read access)
+ * second, read from the data register HEEP_CTRL_WRD_PCIEX_DATA[31:0].
+ *
+ * To write the register, first, write to the data register
+ * HEEP_CTRL_WRD_PCIEX_DATA[31:0] and then:
+ * HEEP_CTRL_WRD_PCIEX_CTRL[15:0] = 0x1DC (offset of the SHR_APMG_GP1 register)
+ * HEEP_CTRL_WRD_PCIEX_CTRL[29:28] = 3 (write access)
+ */
+#define HEEP_CTRL_WRD_PCIEX_CTRL_REG    (CSR_BASE+0x0ec)
+#define HEEP_CTRL_WRD_PCIEX_DATA_REG    (CSR_BASE+0x0f4)
 
 /*
  * HBUS (Host-side Bus)