iwlwifi: update tx command response status

Update to include additional tx command response status for "_agn"
devices.

The following status indicate the transmission was postponed:
  TX_STATUS_POSTPONE_DELAY
  TX_STATUS_POSTPONE_FEW_BYTES
  TX_STATUS_POSTPONE_BT_PRIO
  TX_STATUS_POSTPONE_QUIET_PERIOD
  TX_STATUS_POSTPONE_CALC_TTAK

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>

1 files changed, 48 insertions, 31 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 74d6887c7500..82a9378f72e2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -1662,7 +1662,7 @@ struct iwl_tx_cmd {
         struct ieee80211_hdr hdr[0];
 } __attribute__ ((packed));
 
-/* TX command response is sent after *all* transmission attempts.
+/* TX command response is sent after *3945* transmission attempts.
  *
  * NOTES:
  *
@@ -1690,24 +1690,65 @@ struct iwl_tx_cmd {
  * control line.  Receiving is still allowed in this case.
  */
 enum {
+        TX_3945_STATUS_SUCCESS = 0x01,
+        TX_3945_STATUS_DIRECT_DONE = 0x02,
+        TX_3945_STATUS_FAIL_SHORT_LIMIT = 0x82,
+        TX_3945_STATUS_FAIL_LONG_LIMIT = 0x83,
+        TX_3945_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
+        TX_3945_STATUS_FAIL_MGMNT_ABORT = 0x85,
+        TX_3945_STATUS_FAIL_NEXT_FRAG = 0x86,
+        TX_3945_STATUS_FAIL_LIFE_EXPIRE = 0x87,
+        TX_3945_STATUS_FAIL_DEST_PS = 0x88,
+        TX_3945_STATUS_FAIL_ABORTED = 0x89,
+        TX_3945_STATUS_FAIL_BT_RETRY = 0x8a,
+        TX_3945_STATUS_FAIL_STA_INVALID = 0x8b,
+        TX_3945_STATUS_FAIL_FRAG_DROPPED = 0x8c,
+        TX_3945_STATUS_FAIL_TID_DISABLE = 0x8d,
+        TX_3945_STATUS_FAIL_FRAME_FLUSHED = 0x8e,
+        TX_3945_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
+        TX_3945_STATUS_FAIL_TX_LOCKED = 0x90,
+        TX_3945_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
+};
+
+/*
+ * TX command response is sent after *agn* transmission attempts.
+ *
+ * both postpone and abort status are expected behavior from uCode. there is
+ * no special operation required from driver; except for RFKILL_FLUSH,
+ * which required tx flush host command to flush all the tx frames in queues
+ */
+enum {
         TX_STATUS_SUCCESS = 0x01,
         TX_STATUS_DIRECT_DONE = 0x02,
+        /* postpone TX */
+        TX_STATUS_POSTPONE_DELAY = 0x40,
+        TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
+        TX_STATUS_POSTPONE_BT_PRIO = 0x42,
+        TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
+        TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
+        /* abort TX */
+        TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
         TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
         TX_STATUS_FAIL_LONG_LIMIT = 0x83,
         TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
-        TX_STATUS_FAIL_MGMNT_ABORT = 0x85,
-        TX_STATUS_FAIL_NEXT_FRAG = 0x86,
+        TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
+        TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
         TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
         TX_STATUS_FAIL_DEST_PS = 0x88,
-        TX_STATUS_FAIL_ABORTED = 0x89,
+        TX_STATUS_FAIL_HOST_ABORTED = 0x89,
         TX_STATUS_FAIL_BT_RETRY = 0x8a,
         TX_STATUS_FAIL_STA_INVALID = 0x8b,
         TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
         TX_STATUS_FAIL_TID_DISABLE = 0x8d,
-        TX_STATUS_FAIL_FRAME_FLUSHED = 0x8e,
+        TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
         TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
-        TX_STATUS_FAIL_TX_LOCKED = 0x90,
-        TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
+        /* uCode drop due to FW drop request */
+        TX_STATUS_FAIL_FW_DROP = 0x90,
+        /*
+         * uCode drop due to station color mismatch
+         * between tx command and station table
+         */
+        TX_STATUS_FAIL_STA_COLOR_MISMATCH_DROP = 0x91,
 };
 
 #define TX_PACKET_MODE_REGULAR          0x0000
@@ -1729,30 +1770,6 @@ enum {
         TX_ABORT_REQUIRED_MSK = 0x80000000,     /* bits 31:31 */
 };
 
-static inline u32 iwl_tx_status_to_mac80211(u32 status)
-{
-        status &= TX_STATUS_MSK;
-
-        switch (status) {
-        case TX_STATUS_SUCCESS:
-        case TX_STATUS_DIRECT_DONE:
-                return IEEE80211_TX_STAT_ACK;
-        case TX_STATUS_FAIL_DEST_PS:
-                return IEEE80211_TX_STAT_TX_FILTERED;
-        default:
-                return 0;
-        }
-}
-
-static inline bool iwl_is_tx_success(u32 status)
-{
-        status &= TX_STATUS_MSK;
-        return (status == TX_STATUS_SUCCESS) ||
-               (status == TX_STATUS_DIRECT_DONE);
-}
-
-
-
 /* *******************************
  * TX aggregation status
  ******************************* */