From 04569cbe7653fe0057acc46afc07f2c2fd2508b3 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Wed, 31 Mar 2010 17:57:28 -0700 Subject: iwlwifi: update tx command response status Update to include additional tx command response status for "_agn" devices. The following status indicate the transmission was postponed: TX_STATUS_POSTPONE_DELAY TX_STATUS_POSTPONE_FEW_BYTES TX_STATUS_POSTPONE_BT_PRIO TX_STATUS_POSTPONE_QUIET_PERIOD TX_STATUS_POSTPONE_CALC_TTAK Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-commands.h | 79 ++++++++++++++++++----------- 1 file changed, 48 insertions(+), 31 deletions(-) (limited to 'drivers/net/wireless/iwlwifi/iwl-commands.h') diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 74d6887c7500..82a9378f72e2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -1662,7 +1662,7 @@ struct iwl_tx_cmd { struct ieee80211_hdr hdr[0]; } __attribute__ ((packed)); -/* TX command response is sent after *all* transmission attempts. +/* TX command response is sent after *3945* transmission attempts. * * NOTES: * @@ -1689,25 +1689,66 @@ struct iwl_tx_cmd { * command FIFO has been cleared. The host must then deactivate the TX Abort * control line. Receiving is still allowed in this case. */ +enum { + TX_3945_STATUS_SUCCESS = 0x01, + TX_3945_STATUS_DIRECT_DONE = 0x02, + TX_3945_STATUS_FAIL_SHORT_LIMIT = 0x82, + TX_3945_STATUS_FAIL_LONG_LIMIT = 0x83, + TX_3945_STATUS_FAIL_FIFO_UNDERRUN = 0x84, + TX_3945_STATUS_FAIL_MGMNT_ABORT = 0x85, + TX_3945_STATUS_FAIL_NEXT_FRAG = 0x86, + TX_3945_STATUS_FAIL_LIFE_EXPIRE = 0x87, + TX_3945_STATUS_FAIL_DEST_PS = 0x88, + TX_3945_STATUS_FAIL_ABORTED = 0x89, + TX_3945_STATUS_FAIL_BT_RETRY = 0x8a, + TX_3945_STATUS_FAIL_STA_INVALID = 0x8b, + TX_3945_STATUS_FAIL_FRAG_DROPPED = 0x8c, + TX_3945_STATUS_FAIL_TID_DISABLE = 0x8d, + TX_3945_STATUS_FAIL_FRAME_FLUSHED = 0x8e, + TX_3945_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, + TX_3945_STATUS_FAIL_TX_LOCKED = 0x90, + TX_3945_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, +}; + +/* + * TX command response is sent after *agn* transmission attempts. + * + * both postpone and abort status are expected behavior from uCode. there is + * no special operation required from driver; except for RFKILL_FLUSH, + * which required tx flush host command to flush all the tx frames in queues + */ enum { TX_STATUS_SUCCESS = 0x01, TX_STATUS_DIRECT_DONE = 0x02, + /* postpone TX */ + TX_STATUS_POSTPONE_DELAY = 0x40, + TX_STATUS_POSTPONE_FEW_BYTES = 0x41, + TX_STATUS_POSTPONE_BT_PRIO = 0x42, + TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43, + TX_STATUS_POSTPONE_CALC_TTAK = 0x44, + /* abort TX */ + TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81, TX_STATUS_FAIL_SHORT_LIMIT = 0x82, TX_STATUS_FAIL_LONG_LIMIT = 0x83, TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84, - TX_STATUS_FAIL_MGMNT_ABORT = 0x85, - TX_STATUS_FAIL_NEXT_FRAG = 0x86, + TX_STATUS_FAIL_DRAIN_FLOW = 0x85, + TX_STATUS_FAIL_RFKILL_FLUSH = 0x86, TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, TX_STATUS_FAIL_DEST_PS = 0x88, - TX_STATUS_FAIL_ABORTED = 0x89, + TX_STATUS_FAIL_HOST_ABORTED = 0x89, TX_STATUS_FAIL_BT_RETRY = 0x8a, TX_STATUS_FAIL_STA_INVALID = 0x8b, TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, TX_STATUS_FAIL_TID_DISABLE = 0x8d, - TX_STATUS_FAIL_FRAME_FLUSHED = 0x8e, + TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e, TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, - TX_STATUS_FAIL_TX_LOCKED = 0x90, - TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, + /* uCode drop due to FW drop request */ + TX_STATUS_FAIL_FW_DROP = 0x90, + /* + * uCode drop due to station color mismatch + * between tx command and station table + */ + TX_STATUS_FAIL_STA_COLOR_MISMATCH_DROP = 0x91, }; #define TX_PACKET_MODE_REGULAR 0x0000 @@ -1729,30 +1770,6 @@ enum { TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */ }; -static inline u32 iwl_tx_status_to_mac80211(u32 status) -{ - status &= TX_STATUS_MSK; - - switch (status) { - case TX_STATUS_SUCCESS: - case TX_STATUS_DIRECT_DONE: - return IEEE80211_TX_STAT_ACK; - case TX_STATUS_FAIL_DEST_PS: - return IEEE80211_TX_STAT_TX_FILTERED; - default: - return 0; - } -} - -static inline bool iwl_is_tx_success(u32 status) -{ - status &= TX_STATUS_MSK; - return (status == TX_STATUS_SUCCESS) || - (status == TX_STATUS_DIRECT_DONE); -} - - - /* ******************************* * TX aggregation status ******************************* */ -- cgit v1.2.2