Merge 3.4-rc6 into usb-next

This resolves the conflict with:
	drivers/usb/host/ehci-tegra.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 25 insertions, 11 deletions

diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 187d01ccb973..00103a8c5e04 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -98,7 +98,7 @@ static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
 
         if (unlikely(ret < 0))
                 netdev_warn(dev->net,
-                        "Failed to read register index 0x%08x", index);
+                        "Failed to read reg index 0x%08x: %d", index, ret);
 
         le32_to_cpus(buf);
         *data = *buf;
@@ -128,7 +128,7 @@ static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
 
         if (unlikely(ret < 0))
                 netdev_warn(dev->net,
-                        "Failed to write register index 0x%08x", index);
+                        "Failed to write reg index 0x%08x: %d", index, ret);
 
         kfree(buf);
 
@@ -171,7 +171,7 @@ static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
         idx &= dev->mii.reg_num_mask;
         addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
                 | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
-                | MII_ACCESS_READ;
+                | MII_ACCESS_READ | MII_ACCESS_BUSY;
         ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
         check_warn_goto_done(ret, "Error writing MII_ACCESS");
 
@@ -210,7 +210,7 @@ static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
         idx &= dev->mii.reg_num_mask;
         addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
                 | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
-                | MII_ACCESS_WRITE;
+                | MII_ACCESS_WRITE | MII_ACCESS_BUSY;
         ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
         check_warn_goto_done(ret, "Error writing MII_ACCESS");
 
@@ -508,9 +508,10 @@ static int smsc75xx_link_reset(struct usbnet *dev)
         u16 lcladv, rmtadv;
         int ret;
 
-        /* clear interrupt status */
+        /* read and write to clear phy interrupt status */
         ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
         check_warn_return(ret, "Error reading PHY_INT_SRC");
+        smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC, 0xffff);
 
         ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
         check_warn_return(ret, "Error writing INT_STS");
@@ -643,7 +644,7 @@ static int smsc75xx_set_mac_address(struct usbnet *dev)
 
 static int smsc75xx_phy_initialize(struct usbnet *dev)
 {
-        int bmcr, timeout = 0;
+        int bmcr, ret, timeout = 0;
 
         /* Initialize MII structure */
         dev->mii.dev = dev->net;
@@ -651,6 +652,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev)
         dev->mii.mdio_write = smsc75xx_mdio_write;
         dev->mii.phy_id_mask = 0x1f;
         dev->mii.reg_num_mask = 0x1f;
+        dev->mii.supports_gmii = 1;
         dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
 
         /* reset phy and wait for reset to complete */
@@ -661,7 +663,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev)
                 bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
                 check_warn_return(bmcr, "Error reading MII_BMCR");
                 timeout++;
-        } while ((bmcr & MII_BMCR) && (timeout < 100));
+        } while ((bmcr & BMCR_RESET) && (timeout < 100));
 
         if (timeout >= 100) {
                 netdev_warn(dev->net, "timeout on PHY Reset");
@@ -671,10 +673,13 @@ static int smsc75xx_phy_initialize(struct usbnet *dev)
         smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
                 ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
                 ADVERTISE_PAUSE_ASYM);
+        smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
+                ADVERTISE_1000FULL);
 
-        /* read to clear */
-        smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
-        check_warn_return(bmcr, "Error reading PHY_INT_SRC");
+        /* read and write to clear phy interrupt status */
+        ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
+        check_warn_return(ret, "Error reading PHY_INT_SRC");
+        smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff);
 
         smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
                 PHY_INT_MASK_DEFAULT);
@@ -946,6 +951,14 @@ static int smsc75xx_reset(struct usbnet *dev)
         ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
         check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret);
 
+        /* allow mac to detect speed and duplex from phy */
+        ret = smsc75xx_read_reg(dev, MAC_CR, &buf);
+        check_warn_return(ret, "Failed to read MAC_CR: %d", ret);
+
+        buf |= (MAC_CR_ADD | MAC_CR_ASD);
+        ret = smsc75xx_write_reg(dev, MAC_CR, buf);
+        check_warn_return(ret, "Failed to write MAC_CR: %d", ret);
+
         ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
         check_warn_return(ret, "Failed to read MAC_TX: %d", ret);
 
@@ -1051,6 +1064,7 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
         dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
         dev->net->flags |= IFF_MULTICAST;
         dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
+        dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
         return 0;
 }
 
@@ -1211,7 +1225,7 @@ static const struct driver_info smsc75xx_info = {
         .rx_fixup       = smsc75xx_rx_fixup,
         .tx_fixup       = smsc75xx_tx_fixup,
         .status         = smsc75xx_status,
-        .flags          = FLAG_ETHER | FLAG_SEND_ZLP,
+        .flags          = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
 };
 
 static const struct usb_device_id products[] = {