[PATCH] sky2: fixes for Yukon EC_U chip revisions

Update workarounds for 88E803X based on the latest SysKonnect vendor
driver version (8.41). Tested on EC_U rev A1, only.
These up the receive performance.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 6 insertions, 7 deletions

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 79d62ae8d7cd..71722f53f2b4 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -677,17 +677,15 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
         /* Flush Rx MAC FIFO on any flow control or error */
         sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
 
-        /* Set threshold to 0xa (64 bytes)
-         *  ASF disabled so no need to do WA dev #4.30
-         */
-        sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
+        /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug  */
+        sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1);
 
         /* Configure Tx MAC FIFO */
         sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
         sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
 
         if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-                sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 512/8);
+                sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
                 sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
                 if (hw->dev[port]->mtu > ETH_DATA_LEN) {
                         /* set Tx GMAC FIFO Almost Empty Threshold */
@@ -1061,7 +1059,8 @@ static int sky2_rx_start(struct sky2_port *sky2)
         sky2->rx_put = sky2->rx_next = 0;
         sky2_qset(hw, rxq);
 
-        if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+        if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
+            (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || hw->chip_rev == CHIP_REV_YU_EC_U_B0)) {
                 /* MAC Rx RAM Read is controlled by hardware */
                 sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
         }
@@ -1510,7 +1509,7 @@ static int sky2_down(struct net_device *dev)
 
         /* WA for dev. #4.209 */
         if (hw->chip_id == CHIP_ID_YUKON_EC_U
-            && hw->chip_rev == CHIP_REV_YU_EC_U_A1)
+            && (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
                 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
                              sky2->speed != SPEED_1000 ?
                              TX_STFW_ENA : TX_STFW_DIS);