pcmcia: do not use io_req_t when calling pcmcia_request_io()

Instead of io_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
ranges. After a call to pcmcia_request_io(), the ports found there
are reserved, after calling pcmcia_request_configuration(), they may
be used.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 11 insertions, 8 deletions

diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 3b53818e3eef..3c400cfa82ae 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -158,9 +158,8 @@ static int com20020_probe(struct pcmcia_device *p_dev)
     /* fill in our module parameters as defaults */
     dev->dev_addr[0] = node;
 
-    p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-    p_dev->io.NumPorts1 = 16;
-    p_dev->io.IOAddrLines = 16;
+    p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+    p_dev->resource[0]->end = 16;
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -245,20 +244,24 @@ static int com20020_config(struct pcmcia_device *link)
 
     dev_dbg(&link->dev, "com20020_config\n");
 
-    dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1);
+    dev_dbg(&link->dev, "baseport1 is %Xh\n",
+            (unsigned int) link->resource[0]->start);
+
     i = -ENODEV;
-    if (!link->io.BasePort1)
+    link->io_lines = 16;
+
+    if (!link->resource[0]->start)
     {
         for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
         {
-            link->io.BasePort1 = ioaddr;
-            i = pcmcia_request_io(link, &link->io);
+            link->resource[0]->start = ioaddr;
+            i = pcmcia_request_io(link);
             if (i == 0)
                 break;
         }
     }
     else
-        i = pcmcia_request_io(link, &link->io);
+        i = pcmcia_request_io(link);
     
     if (i != 0)
     {