netxen: fix link speed reporting for some boards

o Read negotiated link speed when link state changes.
o Fix link speed reporting for hybrid nic boards, which have both 1Gbps and
  10Gbps ports.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 20 insertions, 8 deletions

diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 98d0bcda5f4f..4276f7f82238 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -2036,7 +2036,13 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
                 rv = -1;
         }
 
-        DPRINTK(INFO, "Discovered board type:0x%x  ", boardinfo->board_type);
+        if (boardinfo->board_type == NETXEN_BRDTYPE_P3_4_GB_MM) {
+                u32 gpio = netxen_nic_reg_read(adapter,
+                                NETXEN_ROMUSB_GLB_PAD_GPIO_I);
+                if ((gpio & 0x8000) == 0)
+                        boardinfo->board_type = NETXEN_BRDTYPE_P3_10G_TP;
+        }
+
         switch ((netxen_brdtype_t) boardinfo->board_type) {
         case NETXEN_BRDTYPE_P2_SB35_4G:
                 adapter->ahw.board_type = NETXEN_NIC_GBE;
@@ -2055,7 +2061,6 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
         case NETXEN_BRDTYPE_P3_10G_SFP_QT:
         case NETXEN_BRDTYPE_P3_10G_XFP:
         case NETXEN_BRDTYPE_P3_10000_BASE_T:
-
                 adapter->ahw.board_type = NETXEN_NIC_XGBE;
                 break;
         case NETXEN_BRDTYPE_P1_BD:
@@ -2065,9 +2070,12 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
         case NETXEN_BRDTYPE_P3_REF_QG:
         case NETXEN_BRDTYPE_P3_4_GB:
         case NETXEN_BRDTYPE_P3_4_GB_MM:
-
                 adapter->ahw.board_type = NETXEN_NIC_GBE;
                 break;
+        case NETXEN_BRDTYPE_P3_10G_TP:
+                adapter->ahw.board_type = (adapter->portnum < 2) ?
+                        NETXEN_NIC_XGBE : NETXEN_NIC_GBE;
+                break;
         default:
                 printk("%s: Unknown(%x)\n", netxen_nic_driver_name,
                        boardinfo->board_type);
@@ -2112,12 +2120,16 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 {
         __u32 status;
         __u32 autoneg;
-        __u32 mode;
         __u32 port_mode;
 
-        netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode);
-        if (netxen_get_niu_enable_ge(mode)) {   /* Gb 10/100/1000 Mbps mode */
+        if (!netif_carrier_ok(adapter->netdev)) {
+                adapter->link_speed   = 0;
+                adapter->link_duplex  = -1;
+                adapter->link_autoneg = AUTONEG_ENABLE;
+                return;
+        }
 
+        if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
                 adapter->hw_read_wx(adapter,
                                 NETXEN_PORT_MODE_ADDR, &port_mode, 4);
                 if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
@@ -2143,7 +2155,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
                                         adapter->link_speed = SPEED_1000;
                                         break;
                                 default:
-                                        adapter->link_speed = -1;
+                                        adapter->link_speed = 0;
                                         break;
                                 }
                                 switch (netxen_get_phy_duplex(status)) {
@@ -2166,7 +2178,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
                                 goto link_down;
                 } else {
                       link_down:
-                        adapter->link_speed = -1;
+                        adapter->link_speed = 0;
                         adapter->link_duplex = -1;
                 }
         }