igb: move the generic copper link setup code into e1000_phy.c

This patch moves the generic portion of the copper link setup into a
seperate function in e1000_phy.c.  This helps to reduce the size of
copper_link_setup_82575 and make it a bit more readable.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1 insertions, 39 deletions

diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 45063c25155a..5d345e3036a4 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -907,7 +907,6 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
 {
         u32 ctrl;
         s32  ret_val;
-        bool link;
 
         ctrl = rd32(E1000_CTRL);
         ctrl |= E1000_CTRL_SLU;
@@ -940,44 +939,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
         if (ret_val)
                 goto out;
 
-        if (hw->mac.autoneg) {
-                /*
-                 * Setup autoneg and flow control advertisement
-                 * and perform autonegotiation.
-                 */
-                ret_val = igb_copper_link_autoneg(hw);
-                if (ret_val)
-                        goto out;
-        } else {
-                /*
-                 * PHY will be set to 10H, 10F, 100H or 100F
-                 * depending on user settings.
-                 */
-                hw_dbg("Forcing Speed and Duplex\n");
-                ret_val = hw->phy.ops.force_speed_duplex(hw);
-                if (ret_val) {
-                        hw_dbg("Error Forcing Speed and Duplex\n");
-                        goto out;
-                }
-        }
-
-        /*
-         * Check link status. Wait up to 100 microseconds for link to become
-         * valid.
-         */
-        ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link);
-        if (ret_val)
-                goto out;
-
-        if (link) {
-                hw_dbg("Valid link established!!!\n");
-                /* Config the MAC and PHY after link is up */
-                igb_config_collision_dist(hw);
-                ret_val = igb_config_fc_after_link_up(hw);
-        } else {
-                hw_dbg("Unable to establish link!!!\n");
-        }
-
+        ret_val = igb_setup_copper_link(hw);
 out:
         return ret_val;
 }