e1000e: cleanup: do not assign a variable a value when not necessary

Static analysis with cppcheck has shown a few instances of a variable
being reassigned a value before the old one has been used.  None of these
ever require the old value to be used so remove the old values.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 files changed, 20 insertions, 20 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index aa5e4cf90a58..ae96facee8fe 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -695,7 +695,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
 {
         struct e1000_phy_info *phy = &hw->phy;
-        s32 ret_val = 0;
+        s32 ret_val;
         u16 phy_data, index;
 
         ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
@@ -1276,7 +1276,7 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
                                            u16 *data)
 {
         u32 kmrnctrlsta;
-        s32 ret_val = 0;
+        s32 ret_val;
 
         ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
         if (ret_val)
@@ -1311,7 +1311,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
                                             u16 data)
 {
         u32 kmrnctrlsta;
-        s32 ret_val = 0;
+        s32 ret_val;
 
         ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
         if (ret_val)
@@ -1335,7 +1335,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
  **/
 static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw)
 {
-        s32 ret_val = 0;
+        s32 ret_val;
 
         /* If there's an alternate MAC address place it in RAR0
          * so that it will override the Si installed default perm
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index d48143fefbfe..0f55d79afe39 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -1397,7 +1397,7 @@ bool e1000_check_phy_82574(struct e1000_hw *hw)
 {
         u16 status_1kbt = 0;
         u16 receive_errors = 0;
-        s32 ret_val = 0;
+        s32 ret_val;
 
         /* Read PHY Receive Error counter first, if its is max - all F's then
          * read the Base1000T status register If both are max then PHY is hung.
@@ -1542,7 +1542,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 
         ctrl = er32(CTRL);
         status = er32(STATUS);
-        rxcw = er32(RXCW);
+        er32(RXCW);
         /* SYNCH bit and IV bit are sticky */
         udelay(10);
         rxcw = er32(RXCW);
@@ -1812,7 +1812,7 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
 static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
 {
         if (hw->mac.type == e1000_82571) {
-                s32 ret_val = 0;
+                s32 ret_val;
 
                 /* If there's an alternate MAC address place it in RAR0
                  * so that it will override the Si installed default perm
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 4262b4d00609..6ab949d0b39b 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -1405,7 +1405,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
 {
         struct e1000_hw *hw = &adapter->hw;
         u32 ctrl = er32(CTRL);
-        int link = 0;
+        int link;
 
         /* special requirements for 82571/82572 fiber adapters */
 
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 13f8fa0984e8..87676b652edc 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -485,7 +485,7 @@ out:
 static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 {
         struct e1000_phy_info *phy = &hw->phy;
-        s32 ret_val = 0;
+        s32 ret_val;
 
         phy->addr                     = 1;
         phy->reset_delay_us           = 100;
@@ -783,7 +783,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
 static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address,
                                          u16 *data, bool read)
 {
-        s32 ret_val = 0;
+        s32 ret_val;
 
         ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, address);
         if (ret_val)
@@ -1387,7 +1387,7 @@ static s32 e1000_write_smbus_addr(struct e1000_hw *hw)
         u32 strap = er32(STRAP);
         u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >>
             E1000_STRAP_SMT_FREQ_SHIFT;
-        s32 ret_val = 0;
+        s32 ret_val;
 
         strap &= E1000_STRAP_SMBUS_ADDRESS_MASK;
 
@@ -1623,7 +1623,7 @@ release:
  **/
 s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 {
-        s32 ret_val = 0;
+        s32 ret_val;
         u32 ctrl_reg = 0;
         u32 ctrl_ext = 0;
         u32 reg = 0;
@@ -2284,7 +2284,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
  **/
 static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
 {
-        s32 ret_val = 0;
+        s32 ret_val;
         u16 oem_reg;
 
         ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg);
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index d21f749a6492..0709f49f0335 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -165,7 +165,7 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
 s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
 {
         u32 i;
-        s32 ret_val = 0;
+        s32 ret_val;
         u16 offset, nvm_alt_mac_addr_offset, nvm_data;
         u8 alt_mac_addr[ETH_ALEN];
 
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 12784e804f42..e386e95102f4 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3660,8 +3660,8 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter)
         e1e_flush();
 
         /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */
-        regval = er32(RXSTMPH);
-        regval = er32(TXSTMPH);
+        er32(RXSTMPH);
+        er32(TXSTMPH);
 
         /* Get and set the System Time Register SYSTIM base frequency */
         ret_val = e1000e_get_base_timinca(adapter, &regval);
@@ -5834,7 +5834,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
         struct e1000_hw *hw = &adapter->hw;
         u32 i, mac_reg;
         u16 phy_reg, wuc_enable;
-        int retval = 0;
+        int retval;
 
         /* copy MAC RARs to PHY RARs */
         e1000_copy_rx_addrs_to_phy_ich8lan(hw);
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index b4aaf69f4410..44fb432f3c10 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -2671,7 +2671,7 @@ s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
  **/
 s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
 {
-        s32 ret_val = 0;
+        s32 ret_val;
 
         /* Select Port Control Registers page */
         ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
@@ -3103,8 +3103,8 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
                                           u16 *data, bool read)
 {
         s32 ret_val;
-        u32 addr_reg = 0;
-        u32 data_reg = 0;
+        u32 addr_reg;
+        u32 data_reg;
 
         /* This takes care of the difference with desktop vs mobile phy */
         addr_reg = (hw->phy.type == e1000_phy_82578) ?