[PATCH] e1000: Fix SoL/IDER link and loopback

Fix so that if a SoL/IDER session is active, do not allow operations which require a PHY reset and instead log a message.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 48 insertions, 80 deletions

diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index c88f1a3c1b1d..c929277dc276 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -183,7 +183,15 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
         struct e1000_adapter *adapter = netdev_priv(netdev);
         struct e1000_hw *hw = &adapter->hw;
 
-        if(ecmd->autoneg == AUTONEG_ENABLE) {
+        /* When SoL/IDER sessions are active, autoneg/speed/duplex
+         * cannot be changed */
+        if (e1000_check_phy_reset_block(hw)) {
+                DPRINTK(DRV, ERR, "Cannot change link characteristics "
+                        "when SoL/IDER is active.\n");
+                return -EINVAL;
+        }
+
+        if (ecmd->autoneg == AUTONEG_ENABLE) {
                 hw->autoneg = 1;
                 if(hw->media_type == e1000_media_type_fiber)
                         hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
@@ -562,29 +570,10 @@ e1000_get_drvinfo(struct net_device *netdev,
                        struct ethtool_drvinfo *drvinfo)
 {
         struct e1000_adapter *adapter = netdev_priv(netdev);
-        char firmware_version[32];
-        uint16_t eeprom_data;
 
         strncpy(drvinfo->driver,  e1000_driver_name, 32);
         strncpy(drvinfo->version, e1000_driver_version, 32);
-        
-        /* EEPROM image version # is reported as firware version # for
-         * 8257{1|2|3} controllers */
-        e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data);
-        switch (adapter->hw.mac_type) {
-        case e1000_82571:
-        case e1000_82572:
-        case e1000_82573:
-                sprintf(firmware_version, "%d.%d-%d", 
-                        (eeprom_data & 0xF000) >> 12,
-                        (eeprom_data & 0x0FF0) >> 4,
-                        eeprom_data & 0x000F);
-                break;
-        default:
-                sprintf(firmware_version, "n/a");
-        }
-
-        strncpy(drvinfo->fw_version, firmware_version, 32);
+        strncpy(drvinfo->fw_version, "N/A", 32);
         strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
         drvinfo->n_stats = E1000_STATS_LEN;
         drvinfo->testinfo_len = E1000_TEST_LEN;
@@ -990,10 +979,8 @@ e1000_free_desc_rings(struct e1000_adapter *adapter)
 
         kfree(txdr->buffer_info);
         txdr->buffer_info = NULL;
-
         kfree(rxdr->buffer_info);
         rxdr->buffer_info = NULL;
-
         return;
 }
 
@@ -1328,32 +1315,21 @@ static int
 e1000_setup_loopback_test(struct e1000_adapter *adapter)
 {
         uint32_t rctl;
-        struct e1000_hw *hw = &adapter->hw;
 
-        if (hw->media_type == e1000_media_type_fiber ||
-           hw->media_type == e1000_media_type_internal_serdes) {
-                switch (hw->mac_type) {
-                case e1000_82545:
-                case e1000_82546:
-                case e1000_82545_rev_3:
-                case e1000_82546_rev_3:
+        if(adapter->hw.media_type == e1000_media_type_fiber ||
+           adapter->hw.media_type == e1000_media_type_internal_serdes) {
+                if(adapter->hw.mac_type == e1000_82545 ||
+                   adapter->hw.mac_type == e1000_82546 ||
+                   adapter->hw.mac_type == e1000_82545_rev_3 ||
+                   adapter->hw.mac_type == e1000_82546_rev_3)
                         return e1000_set_phy_loopback(adapter);
-                        break;
-                case e1000_82571:
-                case e1000_82572:
-#define E1000_SERDES_LB_ON 0x410
-                        e1000_set_phy_loopback(adapter);
-                        E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON);
-                        msec_delay(10);
-                        return 0;
-                        break;
-                default:
-                        rctl = E1000_READ_REG(hw, RCTL);
+                else {
+                        rctl = E1000_READ_REG(&adapter->hw, RCTL);
                         rctl |= E1000_RCTL_LBM_TCVR;
-                        E1000_WRITE_REG(hw, RCTL, rctl);
+                        E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
                         return 0;
                 }
-        } else if (hw->media_type == e1000_media_type_copper)
+        } else if(adapter->hw.media_type == e1000_media_type_copper)
                 return e1000_set_phy_loopback(adapter);
 
         return 7;
@@ -1364,36 +1340,25 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter)
 {
         uint32_t rctl;
         uint16_t phy_reg;
-        struct e1000_hw *hw = &adapter->hw;
 
         rctl = E1000_READ_REG(&adapter->hw, RCTL);
         rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
 
-        switch (hw->mac_type) {
-        case e1000_82571:
-        case e1000_82572:
-                if (hw->media_type == e1000_media_type_fiber ||
-                   hw->media_type == e1000_media_type_internal_serdes){
-#define E1000_SERDES_LB_OFF 0x400
-                        E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF);
-                        msec_delay(10);
-                        break;
-                }
-                /* fall thru for Cu adapters */
-        case e1000_82545:
-        case e1000_82546:
-        case e1000_82545_rev_3:
-        case e1000_82546_rev_3:
-        default:
-                hw->autoneg = TRUE;
-                e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
-                if (phy_reg & MII_CR_LOOPBACK) {
+        if(adapter->hw.media_type == e1000_media_type_copper ||
+           ((adapter->hw.media_type == e1000_media_type_fiber ||
+             adapter->hw.media_type == e1000_media_type_internal_serdes) &&
+            (adapter->hw.mac_type == e1000_82545 ||
+             adapter->hw.mac_type == e1000_82546 ||
+             adapter->hw.mac_type == e1000_82545_rev_3 ||
+             adapter->hw.mac_type == e1000_82546_rev_3))) {
+                adapter->hw.autoneg = TRUE;
+                e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg);
+                if(phy_reg & MII_CR_LOOPBACK) {
                         phy_reg &= ~MII_CR_LOOPBACK;
-                        e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
-                        e1000_phy_reset(hw);
+                        e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg);
+                        e1000_phy_reset(&adapter->hw);
                 }
-                break;
         }
 }
 
@@ -1488,14 +1453,25 @@ e1000_run_loopback_test(struct e1000_adapter *adapter)
 static int
 e1000_loopback_test(struct e1000_adapter *adapter, uint64_t *data)
 {
-        if((*data = e1000_setup_desc_rings(adapter))) goto err_loopback;
-        if((*data = e1000_setup_loopback_test(adapter)))
-                goto err_loopback_setup;
+        /* PHY loopback cannot be performed if SoL/IDER
+         * sessions are active */
+        if (e1000_check_phy_reset_block(&adapter->hw)) {
+                DPRINTK(DRV, ERR, "Cannot do PHY loopback test "
+                        "when SoL/IDER is active.\n");
+                *data = 0;
+                goto out;
+        }
+
+        if ((*data = e1000_setup_desc_rings(adapter)))
+                goto out;
+        if ((*data = e1000_setup_loopback_test(adapter)))
+                goto err_loopback;
         *data = e1000_run_loopback_test(adapter);
         e1000_loopback_cleanup(adapter);
-err_loopback_setup:
-        e1000_free_desc_rings(adapter);
+
 err_loopback:
+        e1000_free_desc_rings(adapter);
+out:
         return *data;
 }
 
@@ -1722,14 +1698,6 @@ e1000_phys_id(struct net_device *netdev, uint32_t data)
                 msleep_interruptible(data * 1000);
                 del_timer_sync(&adapter->blink_timer);
         }
-        else if(adapter->hw.mac_type < e1000_82573) {
-                E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE |
-                        E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK |
-                        (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
-                        (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) |
-                        (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT)));
-                msleep_interruptible(data * 1000);
-        }
         else {
                 E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE |
                         E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK |