[PATCH] bnx2: update firmware handshake for 5708

Dynamically determine the shared memory location where eeprom
parameters are stored instead of using a fixed location.

Add speed reporting to management firmware. This allows management
firmware to know the current speed without contending for MII
registers.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 79 insertions, 15 deletions

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 08086a9e5411..affb67372e02 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -437,6 +437,62 @@ alloc_mem_err:
 }
 
 static void
+bnx2_report_fw_link(struct bnx2 *bp)
+{
+        u32 fw_link_status = 0;
+
+        if (bp->link_up) {
+                u32 bmsr;
+
+                switch (bp->line_speed) {
+                case SPEED_10:
+                        if (bp->duplex == DUPLEX_HALF)
+                                fw_link_status = BNX2_LINK_STATUS_10HALF;
+                        else
+                                fw_link_status = BNX2_LINK_STATUS_10FULL;
+                        break;
+                case SPEED_100:
+                        if (bp->duplex == DUPLEX_HALF)
+                                fw_link_status = BNX2_LINK_STATUS_100HALF;
+                        else
+                                fw_link_status = BNX2_LINK_STATUS_100FULL;
+                        break;
+                case SPEED_1000:
+                        if (bp->duplex == DUPLEX_HALF)
+                                fw_link_status = BNX2_LINK_STATUS_1000HALF;
+                        else
+                                fw_link_status = BNX2_LINK_STATUS_1000FULL;
+                        break;
+                case SPEED_2500:
+                        if (bp->duplex == DUPLEX_HALF)
+                                fw_link_status = BNX2_LINK_STATUS_2500HALF;
+                        else
+                                fw_link_status = BNX2_LINK_STATUS_2500FULL;
+                        break;
+                }
+
+                fw_link_status |= BNX2_LINK_STATUS_LINK_UP;
+
+                if (bp->autoneg) {
+                        fw_link_status |= BNX2_LINK_STATUS_AN_ENABLED;
+
+                        bnx2_read_phy(bp, MII_BMSR, &bmsr);
+                        bnx2_read_phy(bp, MII_BMSR, &bmsr);
+
+                        if (!(bmsr & BMSR_ANEGCOMPLETE) ||
+                            bp->phy_flags & PHY_PARALLEL_DETECT_FLAG)
+                                fw_link_status |= BNX2_LINK_STATUS_PARALLEL_DET;
+                        else
+                                fw_link_status |= BNX2_LINK_STATUS_AN_COMPLETE;
+                }
+        }
+        else
+                fw_link_status = BNX2_LINK_STATUS_LINK_DOWN;
+
+        REG_WR_IND(bp, bp->shmem_base + BNX2_LINK_STATUS, fw_link_status);
+}
+
+static void
 bnx2_report_link(struct bnx2 *bp)
 {
         if (bp->link_up) {
@@ -467,6 +523,8 @@ bnx2_report_link(struct bnx2 *bp)
                 netif_carrier_off(bp->dev);
                 printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
         }
+
+        bnx2_report_fw_link(bp);
 }
 
 static void
@@ -1123,13 +1181,13 @@ bnx2_init_5708s_phy(struct bnx2 *bp)
                 bnx2_write_phy(bp, BCM5708S_BLK_ADDR, BCM5708S_BLK_ADDR_DIG);
         }
 
-        val = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_CONFIG) &
+        val = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG) &
               BNX2_PORT_HW_CFG_CFG_TXCTL3_MASK;
 
         if (val) {
                 u32 is_backplane;
 
-                is_backplane = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
+                is_backplane = REG_RD_IND(bp, bp->shmem_base +
                                           BNX2_SHARED_HW_CFG_CONFIG);
                 if (is_backplane & BNX2_SHARED_HW_CFG_PHY_BACKPLANE) {
                         bnx2_write_phy(bp, BCM5708S_BLK_ADDR,
@@ -1280,13 +1338,13 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data)
         bp->fw_wr_seq++;
         msg_data |= bp->fw_wr_seq;
 
-        REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data);
+        REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data);
 
         /* wait for an acknowledgement. */
         for (i = 0; i < (FW_ACK_TIME_OUT_MS * 1000)/5; i++) {
                 udelay(5);
 
-                val = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_FW_MB);
+                val = REG_RD_IND(bp, bp->shmem_base + BNX2_FW_MB);
 
                 if ((val & BNX2_FW_MSG_ACK) == (msg_data & BNX2_DRV_MSG_SEQ))
                         break;
@@ -1299,7 +1357,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data)
                 msg_data &= ~BNX2_DRV_MSG_CODE;
                 msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT;
 
-                REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data);
+                REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB, msg_data);
 
                 bp->fw_timed_out = 1;
 
@@ -2935,7 +2993,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
 
         /* Deposit a driver reset signature so the firmware knows that
          * this is a soft reset. */
-        REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_RESET_SIGNATURE,
+        REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_RESET_SIGNATURE,
                    BNX2_DRV_RESET_SIGNATURE_MAGIC);
 
         bp->fw_timed_out = 0;
@@ -4012,7 +4070,7 @@ bnx2_timer(unsigned long data)
                 goto bnx2_restart_timer;
 
         msg = (u32) ++bp->fw_drv_pulse_wr_seq;
-        REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_PULSE_MB, msg);
+        REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_PULSE_MB, msg);
 
         if ((bp->phy_flags & PHY_SERDES_FLAG) &&
             (CHIP_NUM(bp) == CHIP_NUM_5706)) {
@@ -5483,10 +5541,18 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 
         bnx2_init_nvram(bp);
 
+        reg = REG_RD_IND(bp, BNX2_SHM_HDR_SIGNATURE);
+
+        if ((reg & BNX2_SHM_HDR_SIGNATURE_SIG_MASK) ==
+            BNX2_SHM_HDR_SIGNATURE_SIG)
+                bp->shmem_base = REG_RD_IND(bp, BNX2_SHM_HDR_ADDR_0);
+        else
+                bp->shmem_base = HOST_VIEW_SHMEM_BASE;
+
         /* Get the permanent MAC address.  First we need to make sure the
          * firmware is actually running.
          */
-        reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DEV_INFO_SIGNATURE);
+        reg = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_SIGNATURE);
 
         if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
             BNX2_DEV_INFO_SIGNATURE_MAGIC) {
@@ -5495,14 +5561,13 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
                 goto err_out_unmap;
         }
 
-        bp->fw_ver = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
-                                BNX2_DEV_INFO_BC_REV);
+        bp->fw_ver = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_BC_REV);
 
-        reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_UPPER);
+        reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_MAC_UPPER);
         bp->mac_addr[0] = (u8) (reg >> 8);
         bp->mac_addr[1] = (u8) reg;
 
-        reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_LOWER);
+        reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_MAC_LOWER);
         bp->mac_addr[2] = (u8) (reg >> 24);
         bp->mac_addr[3] = (u8) (reg >> 16);
         bp->mac_addr[4] = (u8) (reg >> 8);
@@ -5538,7 +5603,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
                 bp->flags |= NO_WOL_FLAG;
                 if (CHIP_NUM(bp) == CHIP_NUM_5708) {
                         bp->phy_addr = 2;
-                        reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
+                        reg = REG_RD_IND(bp, bp->shmem_base +
                                          BNX2_SHARED_HW_CFG_CONFIG);
                         if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G)
                                 bp->phy_flags |= PHY_2_5G_CAPABLE_FLAG;
@@ -5562,8 +5627,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
         if (bp->phy_flags & PHY_SERDES_FLAG) {
                 bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
 
-                reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
-                                 BNX2_PORT_HW_CFG_CONFIG);
+                reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG);
                 reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
                 if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
                         bp->autoneg = 0;