Merge branch 'linus'

1 files changed, 13 insertions, 16 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index aa633fa95e64..e0b11095b9da 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -66,7 +66,7 @@ config BONDING
           'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
 
           The driver supports multiple bonding modes to allow for both high
-          perfomance and high availability operation.
+          performance and high availability operation.
 
           Refer to <file:Documentation/networking/bonding.txt> for more
           information.
@@ -698,8 +698,8 @@ config VORTEX
         depends on NET_VENDOR_3COM && (PCI || EISA)
         select MII
         ---help---
-          This option enables driver support for a large number of 10mbps and
-          10/100mbps EISA, PCI and PCMCIA 3Com network cards:
+          This option enables driver support for a large number of 10Mbps and
+          10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
 
           "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
           "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
@@ -1021,7 +1021,7 @@ config EEXPRESS_PRO
         depends on NET_ISA
         ---help---
           If you have a network (Ethernet) card of this type, say Y. This
-          driver supports intel i82595{FX,TX} based boards. Note however
+          driver supports Intel i82595{FX,TX} based boards. Note however
           that the EtherExpress PRO/100 Ethernet card has its own separate
           driver.  Please read the Ethernet-HOWTO, available from
           <http://www.tldp.org/docs.html#howto>.
@@ -1208,7 +1208,7 @@ config IBM_EMAC_RX_SKB_HEADROOM
         help
           Additional receive skb headroom. Note, that driver
           will always reserve at least 2 bytes to make IP header
-          aligned, so usualy there is no need to add any additional
+          aligned, so usually there is no need to add any additional
           headroom.
           
           If unsure, set to 0.
@@ -1372,8 +1372,8 @@ config B44
           called b44.
 
 config FORCEDETH
-        tristate "Reverse Engineered nForce Ethernet support (EXPERIMENTAL)"
-        depends on NET_PCI && PCI && EXPERIMENTAL
+        tristate "nForce Ethernet support"
+        depends on NET_PCI && PCI
         help
           If you have a network (Ethernet) controller of this type, say Y and
           read the Ethernet-HOWTO, available from
@@ -1614,11 +1614,7 @@ config SIS900
         ---help---
           This is a driver for the Fast Ethernet PCI network cards based on
           the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
-          SiS 630 and SiS 540 chipsets.  If you have one of those, say Y and
-          read the Ethernet-HOWTO, available at
-          <http://www.tldp.org/docs.html#howto>.  Please read
-          <file:Documentation/networking/sis900.txt> and comments at the
-          beginning of <file:drivers/net/sis900.c> for more information.
+          SiS 630 and SiS 540 chipsets.
 
           This driver also supports AMD 79C901 HomePNA so that you can use
           your phone line as a network cable.
@@ -1934,7 +1930,7 @@ config MYRI_SBUS
           will be called myri_sbus.  This is recommended.
 
 config NS83820
-        tristate "National Semiconduct DP83820 support"
+        tristate "National Semiconductor DP83820 support"
         depends on PCI
         help
           This is a driver for the National Semiconductor DP83820 series
@@ -2195,6 +2191,7 @@ config GFAR_NAPI
 config MV643XX_ETH
         tristate "MV-643XX Ethernet support"
         depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM
+        select MII
         help
           This driver supports the gigabit Ethernet on the Marvell MV643XX
           chipset which is used in the Momenco Ocelot C and Jaguar ATX and
@@ -2514,7 +2511,7 @@ config PPP_FILTER
           Say Y here if you want to be able to filter the packets passing over
           PPP interfaces.  This allows you to control which packets count as
           activity (i.e. which packets will reset the idle timer or bring up
-          a demand-dialled link) and which packets are to be dropped entirely.
+          a demand-dialed link) and which packets are to be dropped entirely.
           You need to say Y here if you wish to use the pass-filter and
           active-filter options to pppd.
 
@@ -2702,8 +2699,8 @@ config SHAPER
           <file:Documentation/networking/shaper.txt> for more information.
 
           An alternative to this traffic shaper is the experimental
-          Class-Based Queueing (CBQ) scheduling support which you get if you
-          say Y to "QoS and/or fair queueing" above.
+          Class-Based Queuing (CBQ) scheduling support which you get if you
+          say Y to "QoS and/or fair queuing" above.
 
           To compile this driver as a module, choose M here: the module
           will be called shaper.  If unsure, say N.