aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd
diff options
context:
space:
mode:
authoreric miao <eric.miao@marvell.com>2008-02-14 02:48:23 -0500
committerDavid Woodhouse <dwmw2@infradead.org>2008-04-22 14:27:27 -0400
commitfe69af002e26ca39824f626459c16d642607b573 (patch)
tree761c1bc2325eaed041a9fbe3a1fe18d9f6c9b988 /drivers/mtd
parentb73d7e4381311bea024bf7cedcba3dcf20f63aab (diff)
[MTD] [NAND] support for pxa3xx
This is preliminary since: 1. It supports only _one_ chip select at the moment. As there is no existing platforms available using two chip selects of the NAND controller, it shall really not include code for supporting the 2nd chip select for now, as such code cannot be verified. 2. It resorts to the default and simpliest memory based badblock table 3. Only limited types of nand flash are currently supported. Most PXA3xx processors come with on-chip NAND flash dies, so there isn't much flexibility for other types of NAND. 4. The NAND controller should be configured to detect the device's ID, thus making it difficult to use nand_scan_ident() to assist the detection process (though it's not impossible) TODO: fix all the above limitations of cuz :-) Signed-off-by: eric miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/Kconfig7
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c1249
3 files changed, 1257 insertions, 0 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 959fb86cda01..180fc7be1826 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -279,6 +279,13 @@ config MTD_NAND_AT91
279 Enables support for NAND Flash / Smart Media Card interface 279 Enables support for NAND Flash / Smart Media Card interface
280 on Atmel AT91 processors. 280 on Atmel AT91 processors.
281 281
282config MTD_NAND_PXA3xx
283 bool "Support for NAND flash devices on PXA3xx"
284 depends on MTD_NAND && PXA3xx
285 help
286 This enables the driver for the NAND flash device found on
287 PXA3xx processors
288
282config MTD_NAND_CM_X270 289config MTD_NAND_CM_X270
283 tristate "Support for NAND Flash on CM-X270 modules" 290 tristate "Support for NAND Flash on CM-X270 modules"
284 depends on MTD_NAND && MACH_ARMCORE 291 depends on MTD_NAND && MACH_ARMCORE
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 80d575eeee96..54a332bda3da 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
27obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o 27obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
28obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o 28obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
29obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o 29obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
30obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
30obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o 31obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
31obj-$(CONFIG_MTD_ALAUDA) += alauda.o 32obj-$(CONFIG_MTD_ALAUDA) += alauda.o
32obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o 33obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
new file mode 100644
index 000000000000..138e219c2304
--- /dev/null
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -0,0 +1,1249 @@
1/*
2 * drivers/mtd/nand/pxa3xx_nand.c
3 *
4 * Copyright © 2005 Intel Corporation
5 * Copyright © 2006 Marvell International Ltd.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <linux/module.h>
13#include <linux/interrupt.h>
14#include <linux/platform_device.h>
15#include <linux/dma-mapping.h>
16#include <linux/delay.h>
17#include <linux/clk.h>
18#include <linux/mtd/mtd.h>
19#include <linux/mtd/nand.h>
20#include <linux/mtd/partitions.h>
21#include <asm/io.h>
22#include <asm/irq.h>
23#include <asm/dma.h>
24
25#include <asm/arch/pxa-regs.h>
26#include <asm/arch/pxa3xx_nand.h>
27
28#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
29
30/* registers and bit definitions */
31#define NDCR (0x00) /* Control register */
32#define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */
33#define NDTR1CS0 (0x0C) /* Timing Parameter 1 for CS0 */
34#define NDSR (0x14) /* Status Register */
35#define NDPCR (0x18) /* Page Count Register */
36#define NDBDR0 (0x1C) /* Bad Block Register 0 */
37#define NDBDR1 (0x20) /* Bad Block Register 1 */
38#define NDDB (0x40) /* Data Buffer */
39#define NDCB0 (0x48) /* Command Buffer0 */
40#define NDCB1 (0x4C) /* Command Buffer1 */
41#define NDCB2 (0x50) /* Command Buffer2 */
42
43#define NDCR_SPARE_EN (0x1 << 31)
44#define NDCR_ECC_EN (0x1 << 30)
45#define NDCR_DMA_EN (0x1 << 29)
46#define NDCR_ND_RUN (0x1 << 28)
47#define NDCR_DWIDTH_C (0x1 << 27)
48#define NDCR_DWIDTH_M (0x1 << 26)
49#define NDCR_PAGE_SZ (0x1 << 24)
50#define NDCR_NCSX (0x1 << 23)
51#define NDCR_ND_MODE (0x3 << 21)
52#define NDCR_NAND_MODE (0x0)
53#define NDCR_CLR_PG_CNT (0x1 << 20)
54#define NDCR_CLR_ECC (0x1 << 19)
55#define NDCR_RD_ID_CNT_MASK (0x7 << 16)
56#define NDCR_RD_ID_CNT(x) (((x) << 16) & NDCR_RD_ID_CNT_MASK)
57
58#define NDCR_RA_START (0x1 << 15)
59#define NDCR_PG_PER_BLK (0x1 << 14)
60#define NDCR_ND_ARB_EN (0x1 << 12)
61
62#define NDSR_MASK (0xfff)
63#define NDSR_RDY (0x1 << 11)
64#define NDSR_CS0_PAGED (0x1 << 10)
65#define NDSR_CS1_PAGED (0x1 << 9)
66#define NDSR_CS0_CMDD (0x1 << 8)
67#define NDSR_CS1_CMDD (0x1 << 7)
68#define NDSR_CS0_BBD (0x1 << 6)
69#define NDSR_CS1_BBD (0x1 << 5)
70#define NDSR_DBERR (0x1 << 4)
71#define NDSR_SBERR (0x1 << 3)
72#define NDSR_WRDREQ (0x1 << 2)
73#define NDSR_RDDREQ (0x1 << 1)
74#define NDSR_WRCMDREQ (0x1)
75
76#define NDCB0_AUTO_RS (0x1 << 25)
77#define NDCB0_CSEL (0x1 << 24)
78#define NDCB0_CMD_TYPE_MASK (0x7 << 21)
79#define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK)
80#define NDCB0_NC (0x1 << 20)
81#define NDCB0_DBC (0x1 << 19)
82#define NDCB0_ADDR_CYC_MASK (0x7 << 16)
83#define NDCB0_ADDR_CYC(x) (((x) << 16) & NDCB0_ADDR_CYC_MASK)
84#define NDCB0_CMD2_MASK (0xff << 8)
85#define NDCB0_CMD1_MASK (0xff)
86#define NDCB0_ADDR_CYC_SHIFT (16)
87
88/* dma-able I/O address for the NAND data and commands */
89#define NDCB0_DMA_ADDR (0x43100048)
90#define NDDB_DMA_ADDR (0x43100040)
91
92/* macros for registers read/write */
93#define nand_writel(info, off, val) \
94 __raw_writel((val), (info)->mmio_base + (off))
95
96#define nand_readl(info, off) \
97 __raw_readl((info)->mmio_base + (off))
98
99/* error code and state */
100enum {
101 ERR_NONE = 0,
102 ERR_DMABUSERR = -1,
103 ERR_SENDCMD = -2,
104 ERR_DBERR = -3,
105 ERR_BBERR = -4,
106};
107
108enum {
109 STATE_READY = 0,
110 STATE_CMD_HANDLE,
111 STATE_DMA_READING,
112 STATE_DMA_WRITING,
113 STATE_DMA_DONE,
114 STATE_PIO_READING,
115 STATE_PIO_WRITING,
116};
117
118struct pxa3xx_nand_timing {
119 unsigned int tCH; /* Enable signal hold time */
120 unsigned int tCS; /* Enable signal setup time */
121 unsigned int tWH; /* ND_nWE high duration */
122 unsigned int tWP; /* ND_nWE pulse time */
123 unsigned int tRH; /* ND_nRE high duration */
124 unsigned int tRP; /* ND_nRE pulse width */
125 unsigned int tR; /* ND_nWE high to ND_nRE low for read */
126 unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */
127 unsigned int tAR; /* ND_ALE low to ND_nRE low delay */
128};
129
130struct pxa3xx_nand_cmdset {
131 uint16_t read1;
132 uint16_t read2;
133 uint16_t program;
134 uint16_t read_status;
135 uint16_t read_id;
136 uint16_t erase;
137 uint16_t reset;
138 uint16_t lock;
139 uint16_t unlock;
140 uint16_t lock_status;
141};
142
143struct pxa3xx_nand_flash {
144 struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
145 struct pxa3xx_nand_cmdset *cmdset;
146
147 uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */
148 uint32_t page_size; /* Page size in bytes (PAGE_SZ) */
149 uint32_t flash_width; /* Width of Flash memory (DWIDTH_M) */
150 uint32_t dfc_width; /* Width of flash controller(DWIDTH_C) */
151 uint32_t num_blocks; /* Number of physical blocks in Flash */
152 uint32_t chip_id;
153
154 /* NOTE: these are automatically calculated, do not define */
155 size_t oob_size;
156 size_t read_id_bytes;
157
158 unsigned int col_addr_cycles;
159 unsigned int row_addr_cycles;
160};
161
162struct pxa3xx_nand_info {
163 struct nand_chip nand_chip;
164
165 struct platform_device *pdev;
166 struct pxa3xx_nand_flash *flash_info;
167
168 struct clk *clk;
169 void __iomem *mmio_base;
170
171 unsigned int buf_start;
172 unsigned int buf_count;
173
174 /* DMA information */
175 int drcmr_dat;
176 int drcmr_cmd;
177
178 unsigned char *data_buff;
179 dma_addr_t data_buff_phys;
180 size_t data_buff_size;
181 int data_dma_ch;
182 struct pxa_dma_desc *data_desc;
183 dma_addr_t data_desc_addr;
184
185 uint32_t reg_ndcr;
186
187 /* saved column/page_addr during CMD_SEQIN */
188 int seqin_column;
189 int seqin_page_addr;
190
191 /* relate to the command */
192 unsigned int state;
193
194 int use_ecc; /* use HW ECC ? */
195 int use_dma; /* use DMA ? */
196
197 size_t data_size; /* data size in FIFO */
198 int retcode;
199 struct completion cmd_complete;
200
201 /* generated NDCBx register values */
202 uint32_t ndcb0;
203 uint32_t ndcb1;
204 uint32_t ndcb2;
205};
206
207static int use_dma = 1;
208module_param(use_dma, bool, 0444);
209MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW");
210
211static struct pxa3xx_nand_cmdset smallpage_cmdset = {
212 .read1 = 0x0000,
213 .read2 = 0x0050,
214 .program = 0x1080,
215 .read_status = 0x0070,
216 .read_id = 0x0090,
217 .erase = 0xD060,
218 .reset = 0x00FF,
219 .lock = 0x002A,
220 .unlock = 0x2423,
221 .lock_status = 0x007A,
222};
223
224static struct pxa3xx_nand_cmdset largepage_cmdset = {
225 .read1 = 0x3000,
226 .read2 = 0x0050,
227 .program = 0x1080,
228 .read_status = 0x0070,
229 .read_id = 0x0090,
230 .erase = 0xD060,
231 .reset = 0x00FF,
232 .lock = 0x002A,
233 .unlock = 0x2423,
234 .lock_status = 0x007A,
235};
236
237static struct pxa3xx_nand_timing samsung512MbX16_timing = {
238 .tCH = 10,
239 .tCS = 0,
240 .tWH = 20,
241 .tWP = 40,
242 .tRH = 30,
243 .tRP = 40,
244 .tR = 11123,
245 .tWHR = 110,
246 .tAR = 10,
247};
248
249static struct pxa3xx_nand_flash samsung512MbX16 = {
250 .timing = &samsung512MbX16_timing,
251 .cmdset = &smallpage_cmdset,
252 .page_per_block = 32,
253 .page_size = 512,
254 .flash_width = 16,
255 .dfc_width = 16,
256 .num_blocks = 4096,
257 .chip_id = 0x46ec,
258};
259
260static struct pxa3xx_nand_timing micron_timing = {
261 .tCH = 10,
262 .tCS = 25,
263 .tWH = 15,
264 .tWP = 25,
265 .tRH = 15,
266 .tRP = 25,
267 .tR = 25000,
268 .tWHR = 60,
269 .tAR = 10,
270};
271
272static struct pxa3xx_nand_flash micron1GbX8 = {
273 .timing = &micron_timing,
274 .cmdset = &largepage_cmdset,
275 .page_per_block = 64,
276 .page_size = 2048,
277 .flash_width = 8,
278 .dfc_width = 8,
279 .num_blocks = 1024,
280 .chip_id = 0xa12c,
281};
282
283static struct pxa3xx_nand_flash micron1GbX16 = {
284 .timing = &micron_timing,
285 .cmdset = &largepage_cmdset,
286 .page_per_block = 64,
287 .page_size = 2048,
288 .flash_width = 16,
289 .dfc_width = 16,
290 .num_blocks = 1024,
291 .chip_id = 0xb12c,
292};
293
294static struct pxa3xx_nand_flash *builtin_flash_types[] = {
295 &samsung512MbX16,
296 &micron1GbX8,
297 &micron1GbX16,
298};
299
300#define NDTR0_tCH(c) (min((c), 7) << 19)
301#define NDTR0_tCS(c) (min((c), 7) << 16)
302#define NDTR0_tWH(c) (min((c), 7) << 11)
303#define NDTR0_tWP(c) (min((c), 7) << 8)
304#define NDTR0_tRH(c) (min((c), 7) << 3)
305#define NDTR0_tRP(c) (min((c), 7) << 0)
306
307#define NDTR1_tR(c) (min((c), 65535) << 16)
308#define NDTR1_tWHR(c) (min((c), 15) << 4)
309#define NDTR1_tAR(c) (min((c), 15) << 0)
310
311/* convert nano-seconds to nand flash controller clock cycles */
312#define ns2cycle(ns, clk) (int)(((ns) * (clk / 1000000) / 1000) + 1)
313
314static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info,
315 struct pxa3xx_nand_timing *t)
316{
317 unsigned long nand_clk = clk_get_rate(info->clk);
318 uint32_t ndtr0, ndtr1;
319
320 ndtr0 = NDTR0_tCH(ns2cycle(t->tCH, nand_clk)) |
321 NDTR0_tCS(ns2cycle(t->tCS, nand_clk)) |
322 NDTR0_tWH(ns2cycle(t->tWH, nand_clk)) |
323 NDTR0_tWP(ns2cycle(t->tWP, nand_clk)) |
324 NDTR0_tRH(ns2cycle(t->tRH, nand_clk)) |
325 NDTR0_tRP(ns2cycle(t->tRP, nand_clk));
326
327 ndtr1 = NDTR1_tR(ns2cycle(t->tR, nand_clk)) |
328 NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
329 NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
330
331 nand_writel(info, NDTR0CS0, ndtr0);
332 nand_writel(info, NDTR1CS0, ndtr1);
333}
334
335#define WAIT_EVENT_TIMEOUT 10
336
337static int wait_for_event(struct pxa3xx_nand_info *info, uint32_t event)
338{
339 int timeout = WAIT_EVENT_TIMEOUT;
340 uint32_t ndsr;
341
342 while (timeout--) {
343 ndsr = nand_readl(info, NDSR) & NDSR_MASK;
344 if (ndsr & event) {
345 nand_writel(info, NDSR, ndsr);
346 return 0;
347 }
348 udelay(10);
349 }
350
351 return -ETIMEDOUT;
352}
353
354static int prepare_read_prog_cmd(struct pxa3xx_nand_info *info,
355 uint16_t cmd, int column, int page_addr)
356{
357 struct pxa3xx_nand_flash *f = info->flash_info;
358 struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
359
360 /* calculate data size */
361 switch (f->page_size) {
362 case 2048:
363 info->data_size = (info->use_ecc) ? 2088 : 2112;
364 break;
365 case 512:
366 info->data_size = (info->use_ecc) ? 520 : 528;
367 break;
368 default:
369 return -EINVAL;
370 }
371
372 /* generate values for NDCBx registers */
373 info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
374 info->ndcb1 = 0;
375 info->ndcb2 = 0;
376 info->ndcb0 |= NDCB0_ADDR_CYC(f->row_addr_cycles + f->col_addr_cycles);
377
378 if (f->col_addr_cycles == 2) {
379 /* large block, 2 cycles for column address
380 * row address starts from 3rd cycle
381 */
382 info->ndcb1 |= (page_addr << 16) | (column & 0xffff);
383 if (f->row_addr_cycles == 3)
384 info->ndcb2 = (page_addr >> 16) & 0xff;
385 } else
386 /* small block, 1 cycles for column address
387 * row address starts from 2nd cycle
388 */
389 info->ndcb1 = (page_addr << 8) | (column & 0xff);
390
391 if (cmd == cmdset->program)
392 info->ndcb0 |= NDCB0_CMD_TYPE(1) | NDCB0_AUTO_RS;
393
394 return 0;
395}
396
397static int prepare_erase_cmd(struct pxa3xx_nand_info *info,
398 uint16_t cmd, int page_addr)
399{
400 info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
401 info->ndcb0 |= NDCB0_CMD_TYPE(2) | NDCB0_AUTO_RS | NDCB0_ADDR_CYC(3);
402 info->ndcb1 = page_addr;
403 info->ndcb2 = 0;
404 return 0;
405}
406
407static int prepare_other_cmd(struct pxa3xx_nand_info *info, uint16_t cmd)
408{
409 struct pxa3xx_nand_cmdset *cmdset = info->flash_info->cmdset;
410
411 info->ndcb0 = cmd | ((cmd & 0xff00) ? NDCB0_DBC : 0);
412 info->ndcb1 = 0;
413 info->ndcb2 = 0;
414
415 if (cmd == cmdset->read_id) {
416 info->ndcb0 |= NDCB0_CMD_TYPE(3);
417 info->data_size = 8;
418 } else if (cmd == cmdset->read_status) {
419 info->ndcb0 |= NDCB0_CMD_TYPE(4);
420 info->data_size = 8;
421 } else if (cmd == cmdset->reset || cmd == cmdset->lock ||
422 cmd == cmdset->unlock) {
423 info->ndcb0 |= NDCB0_CMD_TYPE(5);
424 } else
425 return -EINVAL;
426
427 return 0;
428}
429
430static void enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
431{
432 uint32_t ndcr;
433
434 ndcr = nand_readl(info, NDCR);
435 nand_writel(info, NDCR, ndcr & ~int_mask);
436}
437
438static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
439{
440 uint32_t ndcr;
441
442 ndcr = nand_readl(info, NDCR);
443 nand_writel(info, NDCR, ndcr | int_mask);
444}
445
446/* NOTE: it is a must to set ND_RUN firstly, then write command buffer
447 * otherwise, it does not work
448 */
449static int write_cmd(struct pxa3xx_nand_info *info)
450{
451 uint32_t ndcr;
452
453 /* clear status bits and run */
454 nand_writel(info, NDSR, NDSR_MASK);
455
456 ndcr = info->reg_ndcr;
457
458 ndcr |= info->use_ecc ? NDCR_ECC_EN : 0;
459 ndcr |= info->use_dma ? NDCR_DMA_EN : 0;
460 ndcr |= NDCR_ND_RUN;
461
462 nand_writel(info, NDCR, ndcr);
463
464 if (wait_for_event(info, NDSR_WRCMDREQ)) {
465 printk(KERN_ERR "timed out writing command\n");
466 return -ETIMEDOUT;
467 }
468
469 nand_writel(info, NDCB0, info->ndcb0);
470 nand_writel(info, NDCB0, info->ndcb1);
471 nand_writel(info, NDCB0, info->ndcb2);
472 return 0;
473}
474
475static int handle_data_pio(struct pxa3xx_nand_info *info)
476{
477 int ret, timeout = CHIP_DELAY_TIMEOUT;
478
479 switch (info->state) {
480 case STATE_PIO_WRITING:
481 __raw_writesl(info->mmio_base + NDDB, info->data_buff,
482 info->data_size << 2);
483
484 enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
485
486 ret = wait_for_completion_timeout(&info->cmd_complete, timeout);
487 if (!ret) {
488 printk(KERN_ERR "program command time out\n");
489 return -1;
490 }
491 break;
492 case STATE_PIO_READING:
493 __raw_readsl(info->mmio_base + NDDB, info->data_buff,
494 info->data_size << 2);
495 break;
496 default:
497 printk(KERN_ERR "%s: invalid state %d\n", __FUNCTION__,
498 info->state);
499 return -EINVAL;
500 }
501
502 info->state = STATE_READY;
503 return 0;
504}
505
506static void start_data_dma(struct pxa3xx_nand_info *info, int dir_out)
507{
508 struct pxa_dma_desc *desc = info->data_desc;
509 int dma_len = ALIGN(info->data_size, 32);
510
511 desc->ddadr = DDADR_STOP;
512 desc->dcmd = DCMD_ENDIRQEN | DCMD_WIDTH4 | DCMD_BURST32 | dma_len;
513
514 if (dir_out) {
515 desc->dsadr = info->data_buff_phys;
516 desc->dtadr = NDDB_DMA_ADDR;
517 desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG;
518 } else {
519 desc->dtadr = info->data_buff_phys;
520 desc->dsadr = NDDB_DMA_ADDR;
521 desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
522 }
523
524 DRCMR(info->drcmr_dat) = DRCMR_MAPVLD | info->data_dma_ch;
525 DDADR(info->data_dma_ch) = info->data_desc_addr;
526 DCSR(info->data_dma_ch) |= DCSR_RUN;
527}
528
529static void pxa3xx_nand_data_dma_irq(int channel, void *data)
530{
531 struct pxa3xx_nand_info *info = data;
532 uint32_t dcsr;
533
534 dcsr = DCSR(channel);
535 DCSR(channel) = dcsr;
536
537 if (dcsr & DCSR_BUSERR) {
538 info->retcode = ERR_DMABUSERR;
539 complete(&info->cmd_complete);
540 }
541
542 if (info->state == STATE_DMA_WRITING) {
543 info->state = STATE_DMA_DONE;
544 enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
545 } else {
546 info->state = STATE_READY;
547 complete(&info->cmd_complete);
548 }
549}
550
551static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
552{
553 struct pxa3xx_nand_info *info = devid;
554 unsigned int status;
555
556 status = nand_readl(info, NDSR);
557
558 if (status & (NDSR_RDDREQ | NDSR_DBERR)) {
559 if (status & NDSR_DBERR)
560 info->retcode = ERR_DBERR;
561
562 disable_int(info, NDSR_RDDREQ | NDSR_DBERR);
563
564 if (info->use_dma) {
565 info->state = STATE_DMA_READING;
566 start_data_dma(info, 0);
567 } else {
568 info->state = STATE_PIO_READING;
569 complete(&info->cmd_complete);
570 }
571 } else if (status & NDSR_WRDREQ) {
572 disable_int(info, NDSR_WRDREQ);
573 if (info->use_dma) {
574 info->state = STATE_DMA_WRITING;
575 start_data_dma(info, 1);
576 } else {
577 info->state = STATE_PIO_WRITING;
578 complete(&info->cmd_complete);
579 }
580 } else if (status & (NDSR_CS0_BBD | NDSR_CS0_CMDD)) {
581 if (status & NDSR_CS0_BBD)
582 info->retcode = ERR_BBERR;
583
584 disable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
585 info->state = STATE_READY;
586 complete(&info->cmd_complete);
587 }
588 nand_writel(info, NDSR, status);
589 return IRQ_HANDLED;
590}
591
592static int pxa3xx_nand_do_cmd(struct pxa3xx_nand_info *info, uint32_t event)
593{
594 uint32_t ndcr;
595 int ret, timeout = CHIP_DELAY_TIMEOUT;
596
597 if (write_cmd(info)) {
598 info->retcode = ERR_SENDCMD;
599 goto fail_stop;
600 }
601
602 info->state = STATE_CMD_HANDLE;
603
604 enable_int(info, event);
605
606 ret = wait_for_completion_timeout(&info->cmd_complete, timeout);
607 if (!ret) {
608 printk(KERN_ERR "command execution timed out\n");
609 info->retcode = ERR_SENDCMD;
610 goto fail_stop;
611 }
612
613 if (info->use_dma == 0 && info->data_size > 0)
614 if (handle_data_pio(info))
615 goto fail_stop;
616
617 return 0;
618
619fail_stop:
620 ndcr = nand_readl(info, NDCR);
621 nand_writel(info, NDCR, ndcr & ~NDCR_ND_RUN);
622 udelay(10);
623 return -ETIMEDOUT;
624}
625
626static int pxa3xx_nand_dev_ready(struct mtd_info *mtd)
627{
628 struct pxa3xx_nand_info *info = mtd->priv;
629 return (nand_readl(info, NDSR) & NDSR_RDY) ? 1 : 0;
630}
631
632static inline int is_buf_blank(uint8_t *buf, size_t len)
633{
634 for (; len > 0; len--)
635 if (*buf++ != 0xff)
636 return 0;
637 return 1;
638}
639
640static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
641 int column, int page_addr )
642{
643 struct pxa3xx_nand_info *info = mtd->priv;
644 struct pxa3xx_nand_flash * flash_info = info->flash_info;
645 struct pxa3xx_nand_cmdset *cmdset = flash_info->cmdset;
646 int ret;
647
648 info->use_dma = (use_dma) ? 1 : 0;
649 info->use_ecc = 0;
650 info->data_size = 0;
651 info->state = STATE_READY;
652
653 init_completion(&info->cmd_complete);
654
655 switch (command) {
656 case NAND_CMD_READOOB:
657 /* disable HW ECC to get all the OOB data */
658 info->buf_count = mtd->writesize + mtd->oobsize;
659 info->buf_start = mtd->writesize + column;
660
661 if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
662 break;
663
664 pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
665
666 /* We only are OOB, so if the data has error, does not matter */
667 if (info->retcode == ERR_DBERR)
668 info->retcode = ERR_NONE;
669 break;
670
671 case NAND_CMD_READ0:
672 info->use_ecc = 1;
673 info->retcode = ERR_NONE;
674 info->buf_start = column;
675 info->buf_count = mtd->writesize + mtd->oobsize;
676 memset(info->data_buff, 0xFF, info->buf_count);
677
678 if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
679 break;
680
681 pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
682
683 if (info->retcode == ERR_DBERR) {
684 /* for blank page (all 0xff), HW will calculate its ECC as
685 * 0, which is different from the ECC information within
686 * OOB, ignore such double bit errors
687 */
688 if (is_buf_blank(info->data_buff, mtd->writesize))
689 info->retcode = ERR_NONE;
690 }
691 break;
692 case NAND_CMD_SEQIN:
693 info->buf_start = column;
694 info->buf_count = mtd->writesize + mtd->oobsize;
695 memset(info->data_buff, 0xff, info->buf_count);
696
697 /* save column/page_addr for next CMD_PAGEPROG */
698 info->seqin_column = column;
699 info->seqin_page_addr = page_addr;
700 break;
701 case NAND_CMD_PAGEPROG:
702 info->use_ecc = (info->seqin_column >= mtd->writesize) ? 0 : 1;
703
704 if (prepare_read_prog_cmd(info, cmdset->program,
705 info->seqin_column, info->seqin_page_addr))
706 break;
707
708 pxa3xx_nand_do_cmd(info, NDSR_WRDREQ);
709 break;
710 case NAND_CMD_ERASE1:
711 if (prepare_erase_cmd(info, cmdset->erase, page_addr))
712 break;
713
714 pxa3xx_nand_do_cmd(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
715 break;
716 case NAND_CMD_ERASE2:
717 break;
718 case NAND_CMD_READID:
719 case NAND_CMD_STATUS:
720 info->use_dma = 0; /* force PIO read */
721 info->buf_start = 0;
722 info->buf_count = (command == NAND_CMD_READID) ?
723 flash_info->read_id_bytes : 1;
724
725 if (prepare_other_cmd(info, (command == NAND_CMD_READID) ?
726 cmdset->read_id : cmdset->read_status))
727 break;
728
729 pxa3xx_nand_do_cmd(info, NDSR_RDDREQ);
730 break;
731 case NAND_CMD_RESET:
732 if (prepare_other_cmd(info, cmdset->reset))
733 break;
734
735 ret = pxa3xx_nand_do_cmd(info, NDSR_CS0_CMDD);
736 if (ret == 0) {
737 int timeout = 2;
738 uint32_t ndcr;
739
740 while (timeout--) {
741 if (nand_readl(info, NDSR) & NDSR_RDY)
742 break;
743 msleep(10);
744 }
745
746 ndcr = nand_readl(info, NDCR);
747 nand_writel(info, NDCR, ndcr & ~NDCR_ND_RUN);
748 }
749 break;
750 default:
751 printk(KERN_ERR "non-supported command.\n");
752 break;
753 }
754
755 if (info->retcode == ERR_DBERR) {
756 printk(KERN_ERR "double bit error @ page %08x\n", page_addr);
757 info->retcode = ERR_NONE;
758 }
759}
760
761static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
762{
763 struct pxa3xx_nand_info *info = mtd->priv;
764 char retval = 0xFF;
765
766 if (info->buf_start < info->buf_count)
767 /* Has just send a new command? */
768 retval = info->data_buff[info->buf_start++];
769
770 return retval;
771}
772
773static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
774{
775 struct pxa3xx_nand_info *info = mtd->priv;
776 u16 retval = 0xFFFF;
777
778 if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
779 retval = *((u16 *)(info->data_buff+info->buf_start));
780 info->buf_start += 2;
781 }
782 return retval;
783}
784
785static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
786{
787 struct pxa3xx_nand_info *info = mtd->priv;
788 int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
789
790 memcpy(buf, info->data_buff + info->buf_start, real_len);
791 info->buf_start += real_len;
792}
793
794static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
795 const uint8_t *buf, int len)
796{
797 struct pxa3xx_nand_info *info = mtd->priv;
798 int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
799
800 memcpy(info->data_buff + info->buf_start, buf, real_len);
801 info->buf_start += real_len;
802}
803
804static int pxa3xx_nand_verify_buf(struct mtd_info *mtd,
805 const uint8_t *buf, int len)
806{
807 return 0;
808}
809
810static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
811{
812 return;
813}
814
815static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
816{
817 struct pxa3xx_nand_info *info = mtd->priv;
818
819 /* pxa3xx_nand_send_command has waited for command complete */
820 if (this->state == FL_WRITING || this->state == FL_ERASING) {
821 if (info->retcode == ERR_NONE)
822 return 0;
823 else {
824 /*
825 * any error make it return 0x01 which will tell
826 * the caller the erase and write fail
827 */
828 return 0x01;
829 }
830 }
831
832 return 0;
833}
834
835static void pxa3xx_nand_ecc_hwctl(struct mtd_info *mtd, int mode)
836{
837 return;
838}
839
840static int pxa3xx_nand_ecc_calculate(struct mtd_info *mtd,
841 const uint8_t *dat, uint8_t *ecc_code)
842{
843 return 0;
844}
845
846static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd,
847 uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc)
848{
849 struct pxa3xx_nand_info *info = mtd->priv;
850 /*
851 * Any error include ERR_SEND_CMD, ERR_DBERR, ERR_BUSERR, we
852 * consider it as a ecc error which will tell the caller the
853 * read fail We have distinguish all the errors, but the
854 * nand_read_ecc only check this function return value
855 */
856 if (info->retcode != ERR_NONE)
857 return -1;
858
859 return 0;
860}
861
862static int __readid(struct pxa3xx_nand_info *info, uint32_t *id)
863{
864 struct pxa3xx_nand_flash *f = info->flash_info;
865 struct pxa3xx_nand_cmdset *cmdset = f->cmdset;
866 uint32_t ndcr;
867 uint8_t id_buff[8];
868
869 if (prepare_other_cmd(info, cmdset->read_id)) {
870 printk(KERN_ERR "failed to prepare command\n");
871 return -EINVAL;
872 }
873
874 /* Send command */
875 if (write_cmd(info))
876 goto fail_timeout;
877
878 /* Wait for CMDDM(command done successfully) */
879 if (wait_for_event(info, NDSR_RDDREQ))
880 goto fail_timeout;
881
882 __raw_readsl(info->mmio_base + NDDB, id_buff, 2);
883 *id = id_buff[0] | (id_buff[1] << 8);
884 return 0;
885
886fail_timeout:
887 ndcr = nand_readl(info, NDCR);
888 nand_writel(info, NDCR, ndcr & ~NDCR_ND_RUN);
889 udelay(10);
890 return -ETIMEDOUT;
891}
892
893static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
894 struct pxa3xx_nand_flash *f)
895{
896 struct platform_device *pdev = info->pdev;
897 struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
898 uint32_t ndcr = 0x00000FFF; /* disable all interrupts */
899
900 if (f->page_size != 2048 && f->page_size != 512)
901 return -EINVAL;
902
903 if (f->flash_width != 16 && f->flash_width != 8)
904 return -EINVAL;
905
906 /* calculate flash information */
907 f->oob_size = (f->page_size == 2048) ? 64 : 16;
908 f->read_id_bytes = (f->page_size == 2048) ? 4 : 2;
909
910 /* calculate addressing information */
911 f->col_addr_cycles = (f->page_size == 2048) ? 2 : 1;
912
913 if (f->num_blocks * f->page_per_block > 65536)
914 f->row_addr_cycles = 3;
915 else
916 f->row_addr_cycles = 2;
917
918 ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
919 ndcr |= (f->col_addr_cycles == 2) ? NDCR_RA_START : 0;
920 ndcr |= (f->page_per_block == 64) ? NDCR_PG_PER_BLK : 0;
921 ndcr |= (f->page_size == 2048) ? NDCR_PAGE_SZ : 0;
922 ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0;
923 ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
924
925 ndcr |= NDCR_RD_ID_CNT(f->read_id_bytes);
926 ndcr |= NDCR_SPARE_EN; /* enable spare by default */
927
928 info->reg_ndcr = ndcr;
929
930 pxa3xx_nand_set_timing(info, f->timing);
931 info->flash_info = f;
932 return 0;
933}
934
935static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info)
936{
937 struct pxa3xx_nand_flash *f;
938 uint32_t id;
939 int i;
940
941 for (i = 0; i < ARRAY_SIZE(builtin_flash_types); i++) {
942
943 f = builtin_flash_types[i];
944
945 if (pxa3xx_nand_config_flash(info, f))
946 continue;
947
948 if (__readid(info, &id))
949 continue;
950
951 if (id == f->chip_id)
952 return 0;
953 }
954
955 return -ENODEV;
956}
957
958/* the maximum possible buffer size for large page with OOB data
959 * is: 2048 + 64 = 2112 bytes, allocate a page here for both the
960 * data buffer and the DMA descriptor
961 */
962#define MAX_BUFF_SIZE PAGE_SIZE
963
964static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
965{
966 struct platform_device *pdev = info->pdev;
967 int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc);
968
969 if (use_dma == 0) {
970 info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL);
971 if (info->data_buff == NULL)
972 return -ENOMEM;
973 return 0;
974 }
975
976 info->data_buff = dma_alloc_coherent(&pdev->dev, MAX_BUFF_SIZE,
977 &info->data_buff_phys, GFP_KERNEL);
978 if (info->data_buff == NULL) {
979 dev_err(&pdev->dev, "failed to allocate dma buffer\n");
980 return -ENOMEM;
981 }
982
983 info->data_buff_size = MAX_BUFF_SIZE;
984 info->data_desc = (void *)info->data_buff + data_desc_offset;
985 info->data_desc_addr = info->data_buff_phys + data_desc_offset;
986
987 info->data_dma_ch = pxa_request_dma("nand-data", DMA_PRIO_LOW,
988 pxa3xx_nand_data_dma_irq, info);
989 if (info->data_dma_ch < 0) {
990 dev_err(&pdev->dev, "failed to request data dma\n");
991 dma_free_coherent(&pdev->dev, info->data_buff_size,
992 info->data_buff, info->data_buff_phys);
993 return info->data_dma_ch;
994 }
995
996 return 0;
997}
998
999static struct nand_ecclayout hw_smallpage_ecclayout = {
1000 .eccbytes = 6,
1001 .eccpos = {8, 9, 10, 11, 12, 13 },
1002 .oobfree = { {2, 6} }
1003};
1004
1005static struct nand_ecclayout hw_largepage_ecclayout = {
1006 .eccbytes = 24,
1007 .eccpos = {
1008 40, 41, 42, 43, 44, 45, 46, 47,
1009 48, 49, 50, 51, 52, 53, 54, 55,
1010 56, 57, 58, 59, 60, 61, 62, 63},
1011 .oobfree = { {2, 38} }
1012};
1013
1014static void pxa3xx_nand_init_mtd(struct mtd_info *mtd,
1015 struct pxa3xx_nand_info *info)
1016{
1017 struct pxa3xx_nand_flash *f = info->flash_info;
1018 struct nand_chip *this = &info->nand_chip;
1019
1020 this->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16: 0;
1021
1022 this->waitfunc = pxa3xx_nand_waitfunc;
1023 this->select_chip = pxa3xx_nand_select_chip;
1024 this->dev_ready = pxa3xx_nand_dev_ready;
1025 this->cmdfunc = pxa3xx_nand_cmdfunc;
1026 this->read_word = pxa3xx_nand_read_word;
1027 this->read_byte = pxa3xx_nand_read_byte;
1028 this->read_buf = pxa3xx_nand_read_buf;
1029 this->write_buf = pxa3xx_nand_write_buf;
1030 this->verify_buf = pxa3xx_nand_verify_buf;
1031
1032 this->ecc.mode = NAND_ECC_HW;
1033 this->ecc.hwctl = pxa3xx_nand_ecc_hwctl;
1034 this->ecc.calculate = pxa3xx_nand_ecc_calculate;
1035 this->ecc.correct = pxa3xx_nand_ecc_correct;
1036 this->ecc.size = f->page_size;
1037
1038 if (f->page_size == 2048)
1039 this->ecc.layout = &hw_largepage_ecclayout;
1040 else
1041 this->ecc.layout = &hw_smallpage_ecclayout;
1042
1043 this->chip_delay= 25;
1044}
1045
1046static int pxa3xx_nand_probe(struct platform_device *pdev)
1047{
1048 struct pxa3xx_nand_platform_data *pdata;
1049 struct pxa3xx_nand_info *info;
1050 struct nand_chip *this;
1051 struct mtd_info *mtd;
1052 struct resource *r;
1053 int ret = 0, irq;
1054
1055 pdata = pdev->dev.platform_data;
1056
1057 if (pdata == NULL) {
1058 dev_err(&pdev->dev, "no platform data defined\n");
1059 return -ENODEV;
1060 }
1061
1062 mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct pxa3xx_nand_info),
1063 GFP_KERNEL);
1064 if (mtd == NULL) {
1065 dev_err(&pdev->dev, "failed to allocate memory\n");
1066 return -ENOMEM;
1067 }
1068
1069 info = (struct pxa3xx_nand_info *)(&mtd[1]);
1070 info->pdev = pdev;
1071
1072 this = &info->nand_chip;
1073 mtd->priv = info;
1074
1075 info->clk = clk_get(&pdev->dev, "NANDCLK");
1076 if (IS_ERR(info->clk)) {
1077 dev_err(&pdev->dev, "failed to get nand clock\n");
1078 ret = PTR_ERR(info->clk);
1079 goto fail_free_mtd;
1080 }
1081 clk_enable(info->clk);
1082
1083 r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
1084 if (r == NULL) {
1085 dev_err(&pdev->dev, "no resource defined for data DMA\n");
1086 ret = -ENXIO;
1087 goto fail_put_clk;
1088 }
1089 info->drcmr_dat = r->start;
1090
1091 r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
1092 if (r == NULL) {
1093 dev_err(&pdev->dev, "no resource defined for command DMA\n");
1094 ret = -ENXIO;
1095 goto fail_put_clk;
1096 }
1097 info->drcmr_cmd = r->start;
1098
1099 irq = platform_get_irq(pdev, 0);
1100 if (irq < 0) {
1101 dev_err(&pdev->dev, "no IRQ resource defined\n");
1102 ret = -ENXIO;
1103 goto fail_put_clk;
1104 }
1105
1106 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1107 if (r == NULL) {
1108 dev_err(&pdev->dev, "no IO memory resource defined\n");
1109 ret = -ENODEV;
1110 goto fail_put_clk;
1111 }
1112
1113 r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
1114 if (r == NULL) {
1115 dev_err(&pdev->dev, "failed to request memory resource\n");
1116 ret = -EBUSY;
1117 goto fail_put_clk;
1118 }
1119
1120 info->mmio_base = ioremap(r->start, r->end - r->start + 1);
1121 if (info->mmio_base == NULL) {
1122 dev_err(&pdev->dev, "ioremap() failed\n");
1123 ret = -ENODEV;
1124 goto fail_free_res;
1125 }
1126
1127 ret = pxa3xx_nand_init_buff(info);
1128 if (ret)
1129 goto fail_free_io;
1130
1131 ret = request_irq(IRQ_NAND, pxa3xx_nand_irq, IRQF_DISABLED,
1132 pdev->name, info);
1133 if (ret < 0) {
1134 dev_err(&pdev->dev, "failed to request IRQ\n");
1135 goto fail_free_buf;
1136 }
1137
1138 ret = pxa3xx_nand_detect_flash(info);
1139 if (ret) {
1140 dev_err(&pdev->dev, "failed to detect flash\n");
1141 ret = -ENODEV;
1142 goto fail_free_irq;
1143 }
1144
1145 pxa3xx_nand_init_mtd(mtd, info);
1146
1147 platform_set_drvdata(pdev, mtd);
1148
1149 if (nand_scan(mtd, 1)) {
1150 dev_err(&pdev->dev, "failed to scan nand\n");
1151 ret = -ENXIO;
1152 goto fail_free_irq;
1153 }
1154
1155 return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
1156
1157fail_free_irq:
1158 free_irq(IRQ_NAND, info);
1159fail_free_buf:
1160 if (use_dma) {
1161 pxa_free_dma(info->data_dma_ch);
1162 dma_free_coherent(&pdev->dev, info->data_buff_size,
1163 info->data_buff, info->data_buff_phys);
1164 } else
1165 kfree(info->data_buff);
1166fail_free_io:
1167 iounmap(info->mmio_base);
1168fail_free_res:
1169 release_mem_region(r->start, r->end - r->start + 1);
1170fail_put_clk:
1171 clk_disable(info->clk);
1172 clk_put(info->clk);
1173fail_free_mtd:
1174 kfree(mtd);
1175 return ret;
1176}
1177
1178static int pxa3xx_nand_remove(struct platform_device *pdev)
1179{
1180 struct mtd_info *mtd = platform_get_drvdata(pdev);
1181 struct pxa3xx_nand_info *info = mtd->priv;
1182
1183 platform_set_drvdata(pdev, NULL);
1184
1185 del_mtd_device(mtd);
1186 del_mtd_partitions(mtd);
1187 free_irq(IRQ_NAND, info);
1188 if (use_dma) {
1189 pxa_free_dma(info->data_dma_ch);
1190 dma_free_writecombine(&pdev->dev, info->data_buff_size,
1191 info->data_buff, info->data_buff_phys);
1192 } else
1193 kfree(info->data_buff);
1194 kfree(mtd);
1195 return 0;
1196}
1197
1198#ifdef CONFIG_PM
1199static int pxa3xx_nand_suspend(struct platform_device *pdev, pm_message_t state)
1200{
1201 struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(pdev);
1202 struct pxa3xx_nand_info *info = mtd->priv;
1203
1204 if (info->state != STATE_READY) {
1205 dev_err(&pdev->dev, "driver busy, state = %d\n", info->state);
1206 return -EAGAIN;
1207 }
1208
1209 return 0;
1210}
1211
1212static int pxa3xx_nand_resume(struct platform_device *pdev)
1213{
1214 struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(pdev);
1215 struct pxa3xx_nand_info *info = mtd->priv;
1216
1217 clk_enable(info->clk);
1218
1219 return pxa3xx_nand_config_flash(info);
1220}
1221#else
1222#define pxa3xx_nand_suspend NULL
1223#define pxa3xx_nand_resume NULL
1224#endif
1225
1226static struct platform_driver pxa3xx_nand_driver = {
1227 .driver = {
1228 .name = "pxa3xx-nand",
1229 },
1230 .probe = pxa3xx_nand_probe,
1231 .remove = pxa3xx_nand_remove,
1232 .suspend = pxa3xx_nand_suspend,
1233 .resume = pxa3xx_nand_resume,
1234};
1235
1236static int __init pxa3xx_nand_init(void)
1237{
1238 return platform_driver_register(&pxa3xx_nand_driver);
1239}
1240module_init(pxa3xx_nand_init);
1241
1242static void __exit pxa3xx_nand_exit(void)
1243{
1244 platform_driver_unregister(&pxa3xx_nand_driver);
1245}
1246module_exit(pxa3xx_nand_exit);
1247
1248MODULE_LICENSE("GPL");
1249MODULE_DESCRIPTION("PXA3xx NAND controller driver");
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-10 16:31:14 -0500