mtd: replace DEBUG() with pr_debug()

Start moving away from the MTD_DEBUG_LEVEL messages. The dynamic
debugging feature is a generic kernel feature that provides more
flexibility.

(See Documentation/dynamic-debug-howto.txt)

Also fix some punctuation, indentation, and capitalization that went
along with the affected lines.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>

1 files changed, 12 insertions, 20 deletions

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index d40c410a3241..c443f527a53a 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1917,8 +1917,7 @@ static void jedec_reset(u32 base, struct map_info *map, struct cfi_private *cfi)
          * as they will ignore the writes and don't care what address
          * the F0 is written to */
         if (cfi->addr_unlock1) {
-                DEBUG( MTD_DEBUG_LEVEL3,
-                       "reset unlock called %x %x \n",
+                pr_debug( "reset unlock called %x %x \n",
                        cfi->addr_unlock1,cfi->addr_unlock2);
                 cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
                 cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
@@ -1941,7 +1940,7 @@ static int cfi_jedec_setup(struct map_info *map, struct cfi_private *cfi, int in
         uint8_t uaddr;
 
         if (!(jedec_table[index].devtypes & cfi->device_type)) {
-                DEBUG(MTD_DEBUG_LEVEL1, "Rejecting potential %s with incompatible %d-bit device type\n",
+                pr_debug("Rejecting potential %s with incompatible %d-bit device type\n",
                       jedec_table[index].name, 4 * (1<<cfi->device_type));
                 return 0;
         }
@@ -2021,7 +2020,7 @@ static inline int jedec_match( uint32_t base,
                  * there aren't.
                  */
                 if (finfo->dev_id > 0xff) {
-                        DEBUG( MTD_DEBUG_LEVEL3, "%s(): ID is not 8bit\n",
+                        pr_debug("%s(): ID is not 8bit\n",
                                __func__);
                         goto match_done;
                 }
@@ -2045,12 +2044,10 @@ static inline int jedec_match( uint32_t base,
         }
 
         /* the part size must fit in the memory window */
-        DEBUG( MTD_DEBUG_LEVEL3,
-               "MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
+        pr_debug("MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n",
                __func__, base, 1 << finfo->dev_size, base + (1 << finfo->dev_size) );
         if ( base + cfi_interleave(cfi) * ( 1 << finfo->dev_size ) > map->size ) {
-                DEBUG( MTD_DEBUG_LEVEL3,
-                       "MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
+                pr_debug("MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n",
                        __func__, finfo->mfr_id, finfo->dev_id,
                        1 << finfo->dev_size );
                 goto match_done;
@@ -2061,13 +2058,12 @@ static inline int jedec_match( uint32_t base,
 
         uaddr = finfo->uaddr;
 
-        DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
+        pr_debug("MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n",
                __func__, cfi->addr_unlock1, cfi->addr_unlock2 );
         if ( MTD_UADDR_UNNECESSARY != uaddr && MTD_UADDR_DONT_CARE != uaddr
              && ( unlock_addrs[uaddr].addr1 / cfi->device_type != cfi->addr_unlock1 ||
                   unlock_addrs[uaddr].addr2 / cfi->device_type != cfi->addr_unlock2 ) ) {
-                DEBUG( MTD_DEBUG_LEVEL3,
-                        "MTD %s(): 0x%.4x 0x%.4x did not match\n",
+                pr_debug("MTD %s(): 0x%.4x 0x%.4x did not match\n",
                         __func__,
                         unlock_addrs[uaddr].addr1,
                         unlock_addrs[uaddr].addr2);
@@ -2083,15 +2079,13 @@ static inline int jedec_match( uint32_t base,
          * FIXME - write a driver that takes all of the chip info as
          * module parameters, doesn't probe but forces a load.
          */
-        DEBUG( MTD_DEBUG_LEVEL3,
-               "MTD %s(): check ID's disappear when not in ID mode\n",
+        pr_debug("MTD %s(): check ID's disappear when not in ID mode\n",
                __func__ );
         jedec_reset( base, map, cfi );
         mfr = jedec_read_mfr( map, base, cfi );
         id = jedec_read_id( map, base, cfi );
         if ( mfr == cfi->mfr && id == cfi->id ) {
-                DEBUG( MTD_DEBUG_LEVEL3,
-                       "MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
+                pr_debug("MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n"
                        "You might need to manually specify JEDEC parameters.\n",
                         __func__, cfi->mfr, cfi->id );
                 goto match_done;
@@ -2104,7 +2098,7 @@ static inline int jedec_match( uint32_t base,
          * Put the device back in ID mode - only need to do this if we
          * were truly frobbing a real device.
          */
-        DEBUG( MTD_DEBUG_LEVEL3, "MTD %s(): return to ID mode\n", __func__ );
+        pr_debug("MTD %s(): return to ID mode\n", __func__ );
         if (cfi->addr_unlock1) {
                 cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
                 cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL);
@@ -2167,13 +2161,11 @@ static int jedec_probe_chip(struct map_info *map, __u32 base,
 
                 cfi->mfr = jedec_read_mfr(map, base, cfi);
                 cfi->id = jedec_read_id(map, base, cfi);
-                DEBUG(MTD_DEBUG_LEVEL3,
-                      "Search for id:(%02x %02x) interleave(%d) type(%d)\n",
+                pr_debug("Search for id:(%02x %02x) interleave(%d) type(%d)\n",
                         cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type);
                 for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
                         if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) {
-                                DEBUG( MTD_DEBUG_LEVEL3,
-                                       "MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
+                                pr_debug("MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n",
                                        __func__, cfi->mfr, cfi->id,
                                        cfi->addr_unlock1, cfi->addr_unlock2 );
                                 if (!cfi_jedec_setup(map, cfi, i))