Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

7 files changed, 975 insertions, 14 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 0efa390978bd..99d4b28d52ed 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -145,6 +145,16 @@ config MMC_IMX
 
           If unsure, say N.
 
+config MMC_MXC
+        tristate "Freescale i.MX2/3 Multimedia Card Interface support"
+        depends on ARCH_MXC
+        help
+          This selects the Freescale i.MX2/3 Multimedia card Interface.
+          If you have a i.MX platform with a Multimedia Card slot,
+          say Y or M here.
+
+          If unsure, say N.
+
 config MMC_TIFM_SD
         tristate "TI Flash Media MMC/SD Interface support  (EXPERIMENTAL)"
         depends on EXPERIMENTAL && PCI
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 98cab84829b8..dedec55861d9 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -9,6 +9,7 @@ endif
 obj-$(CONFIG_MMC_ARMMMCI)       += mmci.o
 obj-$(CONFIG_MMC_PXA)           += pxamci.o
 obj-$(CONFIG_MMC_IMX)           += imxmmc.o
+obj-$(CONFIG_MMC_MXC)           += mxcmmc.o
 obj-$(CONFIG_MMC_SDHCI)         += sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)     += sdhci-pci.o
 obj-$(CONFIG_MMC_RICOH_MMC)     += ricoh_mmc.o
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1bcbdd6763ac..2909bbc8ad00 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -430,6 +430,8 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
                                 clk = 255;
                         host->cclk = host->mclk / (2 * (clk + 1));
                 }
+                if (host->hw_designer == 0x80)
+                        clk |= MCI_FCEN; /* Bug fix in ST IP block */
                 clk |= MCI_CLK_ENABLE;
         }
 
@@ -440,15 +442,27 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
         case MMC_POWER_OFF:
                 break;
         case MMC_POWER_UP:
-                pwr |= MCI_PWR_UP;
-                break;
+                /* The ST version does not have this, fall through to POWER_ON */
+                if (host->hw_designer != 0x80) {
+                        pwr |= MCI_PWR_UP;
+                        break;
+                }
         case MMC_POWER_ON:
                 pwr |= MCI_PWR_ON;
                 break;
         }
 
-        if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
-                pwr |= MCI_ROD;
+        if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+                if (host->hw_designer != 0x80)
+                        pwr |= MCI_ROD;
+                else {
+                        /*
+                         * The ST Micro variant use the ROD bit for something
+                         * else and only has OD (Open Drain).
+                         */
+                        pwr |= MCI_OD;
+                }
+        }
 
         writel(clk, host->base + MMCICLOCK);
 
@@ -500,6 +514,12 @@ static int mmci_probe(struct amba_device *dev, void *id)
         }
 
         host = mmc_priv(mmc);
+        /* Bits 12 thru 19 is the designer */
+        host->hw_designer = (dev->periphid >> 12) & 0xff;
+        /* Bits 20 thru 23 is the revison */
+        host->hw_revision = (dev->periphid >> 20) & 0xf;
+        DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
+        DBG(host, "revision = 0x%01x\n", host->hw_revision);
         host->clk = clk_get(&dev->dev, NULL);
         if (IS_ERR(host->clk)) {
                 ret = PTR_ERR(host->clk);
@@ -693,6 +713,15 @@ static struct amba_id mmci_ids[] = {
                 .id     = 0x00041181,
                 .mask   = 0x000fffff,
         },
+        /* ST Micro variants */
+        {
+                .id     = 0x00180180,
+                .mask   = 0x00ffffff,
+        },
+        {
+                .id     = 0x00280180,
+                .mask   = 0x00ffffff,
+        },
         { 0, 0 },
 };
 
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 0f39c490f022..0441bac1c0ec 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -11,13 +11,23 @@
 #define MCI_PWR_OFF             0x00
 #define MCI_PWR_UP              0x02
 #define MCI_PWR_ON              0x03
+#define MCI_DATA2DIREN          (1 << 2)
+#define MCI_CMDDIREN            (1 << 3)
+#define MCI_DATA0DIREN          (1 << 4)
+#define MCI_DATA31DIREN         (1 << 5)
 #define MCI_OD                  (1 << 6)
 #define MCI_ROD                 (1 << 7)
+/* The ST Micro version does not have ROD */
+#define MCI_FBCLKEN             (1 << 7)
+#define MCI_DATA74DIREN         (1 << 8)
 
 #define MMCICLOCK               0x004
 #define MCI_CLK_ENABLE          (1 << 8)
 #define MCI_CLK_PWRSAVE         (1 << 9)
 #define MCI_CLK_BYPASS          (1 << 10)
+#define MCI_WIDE_BUS            (1 << 11)
+/* HW flow control on the ST Micro version */
+#define MCI_FCEN                (1 << 13)
 
 #define MMCIARGUMENT            0x008
 #define MMCICOMMAND             0x00c
@@ -26,6 +36,10 @@
 #define MCI_CPSM_INTERRUPT      (1 << 8)
 #define MCI_CPSM_PENDING        (1 << 9)
 #define MCI_CPSM_ENABLE         (1 << 10)
+#define MCI_SDIO_SUSP           (1 << 11)
+#define MCI_ENCMD_COMPL         (1 << 12)
+#define MCI_NIEN                (1 << 13)
+#define MCI_CE_ATACMD           (1 << 14)
 
 #define MMCIRESPCMD             0x010
 #define MMCIRESPONSE0           0x014
@@ -39,6 +53,11 @@
 #define MCI_DPSM_DIRECTION      (1 << 1)
 #define MCI_DPSM_MODE           (1 << 2)
 #define MCI_DPSM_DMAENABLE      (1 << 3)
+#define MCI_DPSM_BLOCKSIZE      (1 << 4)
+#define MCI_DPSM_RWSTART        (1 << 8)
+#define MCI_DPSM_RWSTOP         (1 << 9)
+#define MCI_DPSM_RWMOD          (1 << 10)
+#define MCI_DPSM_SDIOEN         (1 << 11)
 
 #define MMCIDATACNT             0x030
 #define MMCISTATUS              0x034
@@ -63,6 +82,8 @@
 #define MCI_RXFIFOEMPTY         (1 << 19)
 #define MCI_TXDATAAVLBL         (1 << 20)
 #define MCI_RXDATAAVLBL         (1 << 21)
+#define MCI_SDIOIT              (1 << 22)
+#define MCI_CEATAEND            (1 << 23)
 
 #define MMCICLEAR               0x038
 #define MCI_CMDCRCFAILCLR       (1 << 0)
@@ -75,6 +96,8 @@
 #define MCI_CMDSENTCLR          (1 << 7)
 #define MCI_DATAENDCLR          (1 << 8)
 #define MCI_DATABLOCKENDCLR     (1 << 10)
+#define MCI_SDIOITC             (1 << 22)
+#define MCI_CEATAENDC           (1 << 23)
 
 #define MMCIMASK0               0x03c
 #define MCI_CMDCRCFAILMASK      (1 << 0)
@@ -98,6 +121,8 @@
 #define MCI_RXFIFOEMPTYMASK     (1 << 19)
 #define MCI_TXDATAAVLBLMASK     (1 << 20)
 #define MCI_RXDATAAVLBLMASK     (1 << 21)
+#define MCI_SDIOITMASK          (1 << 22)
+#define MCI_CEATAENDMASK        (1 << 23)
 
 #define MMCIMASK1               0x040
 #define MMCIFIFOCNT             0x048
@@ -136,6 +161,9 @@ struct mmci_host {
         u32                     pwr;
         struct mmc_platform_data *plat;
 
+        u8                      hw_designer;
+        u8                      hw_revision:4;
+
         struct timer_list       timer;
         unsigned int            oldstat;
 
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
new file mode 100644
index 000000000000..dda0be4e25dc
--- /dev/null
+++ b/drivers/mmc/host/mxcmmc.c
@@ -0,0 +1,880 @@
+/*
+ *  linux/drivers/mmc/host/mxcmmc.c - Freescale i.MX MMCI driver
+ *
+ *  This is a driver for the SDHC controller found in Freescale MX2/MX3
+ *  SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
+ *  Unlike the hardware found on MX1, this hardware just works and does
+ *  not need all the quirks found in imxmmc.c, hence the seperate driver.
+ *
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *  Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
+ *
+ *  derived from pxamci.c by Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <mach/mmc.h>
+
+#ifdef CONFIG_ARCH_MX2
+#include <mach/dma-mx1-mx2.h>
+#define HAS_DMA
+#endif
+
+#define DRIVER_NAME "imx-mmc"
+
+#define MMC_REG_STR_STP_CLK             0x00
+#define MMC_REG_STATUS                  0x04
+#define MMC_REG_CLK_RATE                0x08
+#define MMC_REG_CMD_DAT_CONT            0x0C
+#define MMC_REG_RES_TO                  0x10
+#define MMC_REG_READ_TO                 0x14
+#define MMC_REG_BLK_LEN                 0x18
+#define MMC_REG_NOB                     0x1C
+#define MMC_REG_REV_NO                  0x20
+#define MMC_REG_INT_CNTR                0x24
+#define MMC_REG_CMD                     0x28
+#define MMC_REG_ARG                     0x2C
+#define MMC_REG_RES_FIFO                0x34
+#define MMC_REG_BUFFER_ACCESS           0x38
+
+#define STR_STP_CLK_RESET               (1 << 3)
+#define STR_STP_CLK_START_CLK           (1 << 1)
+#define STR_STP_CLK_STOP_CLK            (1 << 0)
+
+#define STATUS_CARD_INSERTION           (1 << 31)
+#define STATUS_CARD_REMOVAL             (1 << 30)
+#define STATUS_YBUF_EMPTY               (1 << 29)
+#define STATUS_XBUF_EMPTY               (1 << 28)
+#define STATUS_YBUF_FULL                (1 << 27)
+#define STATUS_XBUF_FULL                (1 << 26)
+#define STATUS_BUF_UND_RUN              (1 << 25)
+#define STATUS_BUF_OVFL                 (1 << 24)
+#define STATUS_SDIO_INT_ACTIVE          (1 << 14)
+#define STATUS_END_CMD_RESP             (1 << 13)
+#define STATUS_WRITE_OP_DONE            (1 << 12)
+#define STATUS_DATA_TRANS_DONE          (1 << 11)
+#define STATUS_READ_OP_DONE             (1 << 11)
+#define STATUS_WR_CRC_ERROR_CODE_MASK   (3 << 10)
+#define STATUS_CARD_BUS_CLK_RUN         (1 << 8)
+#define STATUS_BUF_READ_RDY             (1 << 7)
+#define STATUS_BUF_WRITE_RDY            (1 << 6)
+#define STATUS_RESP_CRC_ERR             (1 << 5)
+#define STATUS_CRC_READ_ERR             (1 << 3)
+#define STATUS_CRC_WRITE_ERR            (1 << 2)
+#define STATUS_TIME_OUT_RESP            (1 << 1)
+#define STATUS_TIME_OUT_READ            (1 << 0)
+#define STATUS_ERR_MASK                 0x2f
+
+#define CMD_DAT_CONT_CMD_RESP_LONG_OFF  (1 << 12)
+#define CMD_DAT_CONT_STOP_READWAIT      (1 << 11)
+#define CMD_DAT_CONT_START_READWAIT     (1 << 10)
+#define CMD_DAT_CONT_BUS_WIDTH_4        (2 << 8)
+#define CMD_DAT_CONT_INIT               (1 << 7)
+#define CMD_DAT_CONT_WRITE              (1 << 4)
+#define CMD_DAT_CONT_DATA_ENABLE        (1 << 3)
+#define CMD_DAT_CONT_RESPONSE_48BIT_CRC (1 << 0)
+#define CMD_DAT_CONT_RESPONSE_136BIT    (2 << 0)
+#define CMD_DAT_CONT_RESPONSE_48BIT     (3 << 0)
+
+#define INT_SDIO_INT_WKP_EN             (1 << 18)
+#define INT_CARD_INSERTION_WKP_EN       (1 << 17)
+#define INT_CARD_REMOVAL_WKP_EN         (1 << 16)
+#define INT_CARD_INSERTION_EN           (1 << 15)
+#define INT_CARD_REMOVAL_EN             (1 << 14)
+#define INT_SDIO_IRQ_EN                 (1 << 13)
+#define INT_DAT0_EN                     (1 << 12)
+#define INT_BUF_READ_EN                 (1 << 4)
+#define INT_BUF_WRITE_EN                (1 << 3)
+#define INT_END_CMD_RES_EN              (1 << 2)
+#define INT_WRITE_OP_DONE_EN            (1 << 1)
+#define INT_READ_OP_EN                  (1 << 0)
+
+struct mxcmci_host {
+        struct mmc_host         *mmc;
+        struct resource         *res;
+        void __iomem            *base;
+        int                     irq;
+        int                     detect_irq;
+        int                     dma;
+        int                     do_dma;
+        unsigned int            power_mode;
+        struct imxmmc_platform_data *pdata;
+
+        struct mmc_request      *req;
+        struct mmc_command      *cmd;
+        struct mmc_data         *data;
+
+        unsigned int            dma_nents;
+        unsigned int            datasize;
+        unsigned int            dma_dir;
+
+        u16                     rev_no;
+        unsigned int            cmdat;
+
+        struct clk              *clk;
+
+        int                     clock;
+
+        struct work_struct      datawork;
+};
+
+static inline int mxcmci_use_dma(struct mxcmci_host *host)
+{
+        return host->do_dma;
+}
+
+static void mxcmci_softreset(struct mxcmci_host *host)
+{
+        int i;
+
+        /* reset sequence */
+        writew(STR_STP_CLK_RESET, host->base + MMC_REG_STR_STP_CLK);
+        writew(STR_STP_CLK_RESET | STR_STP_CLK_START_CLK,
+                        host->base + MMC_REG_STR_STP_CLK);
+
+        for (i = 0; i < 8; i++)
+                writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
+
+        writew(0xff, host->base + MMC_REG_RES_TO);
+}
+
+static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
+{
+        unsigned int nob = data->blocks;
+        unsigned int blksz = data->blksz;
+        unsigned int datasize = nob * blksz;
+#ifdef HAS_DMA
+        struct scatterlist *sg;
+        int i;
+#endif
+        if (data->flags & MMC_DATA_STREAM)
+                nob = 0xffff;
+
+        host->data = data;
+        data->bytes_xfered = 0;
+
+        writew(nob, host->base + MMC_REG_NOB);
+        writew(blksz, host->base + MMC_REG_BLK_LEN);
+        host->datasize = datasize;
+
+#ifdef HAS_DMA
+        for_each_sg(data->sg, sg, data->sg_len, i) {
+                if (sg->offset & 3 || sg->length & 3) {
+                        host->do_dma = 0;
+                        return;
+                }
+        }
+
+        if (data->flags & MMC_DATA_READ) {
+                host->dma_dir = DMA_FROM_DEVICE;
+                host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
+                                             data->sg_len,  host->dma_dir);
+
+                imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
+                                 host->res->start + MMC_REG_BUFFER_ACCESS,
+                                 DMA_MODE_READ);
+        } else {
+                host->dma_dir = DMA_TO_DEVICE;
+                host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
+                                             data->sg_len,  host->dma_dir);
+
+                imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
+                                 host->res->start + MMC_REG_BUFFER_ACCESS,
+                                 DMA_MODE_WRITE);
+        }
+
+        wmb();
+
+        imx_dma_enable(host->dma);
+#endif /* HAS_DMA */
+}
+
+static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
+                unsigned int cmdat)
+{
+        WARN_ON(host->cmd != NULL);
+        host->cmd = cmd;
+
+        switch (mmc_resp_type(cmd)) {
+        case MMC_RSP_R1: /* short CRC, OPCODE */
+        case MMC_RSP_R1B:/* short CRC, OPCODE, BUSY */
+                cmdat |= CMD_DAT_CONT_RESPONSE_48BIT_CRC;
+                break;
+        case MMC_RSP_R2: /* long 136 bit + CRC */
+                cmdat |= CMD_DAT_CONT_RESPONSE_136BIT;
+                break;
+        case MMC_RSP_R3: /* short */
+                cmdat |= CMD_DAT_CONT_RESPONSE_48BIT;
+                break;
+        case MMC_RSP_NONE:
+                break;
+        default:
+                dev_err(mmc_dev(host->mmc), "unhandled response type 0x%x\n",
+                                mmc_resp_type(cmd));
+                cmd->error = -EINVAL;
+                return -EINVAL;
+        }
+
+        if (mxcmci_use_dma(host))
+                writel(INT_READ_OP_EN | INT_WRITE_OP_DONE_EN |
+                                INT_END_CMD_RES_EN,
+                                host->base + MMC_REG_INT_CNTR);
+        else
+                writel(INT_END_CMD_RES_EN, host->base + MMC_REG_INT_CNTR);
+
+        writew(cmd->opcode, host->base + MMC_REG_CMD);
+        writel(cmd->arg, host->base + MMC_REG_ARG);
+        writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT);
+
+        return 0;
+}
+
+static void mxcmci_finish_request(struct mxcmci_host *host,
+                struct mmc_request *req)
+{
+        writel(0, host->base + MMC_REG_INT_CNTR);
+
+        host->req = NULL;
+        host->cmd = NULL;
+        host->data = NULL;
+
+        mmc_request_done(host->mmc, req);
+}
+
+static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat)
+{
+        struct mmc_data *data = host->data;
+        int data_error;
+
+#ifdef HAS_DMA
+        if (mxcmci_use_dma(host)) {
+                imx_dma_disable(host->dma);
+                dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents,
+                                host->dma_dir);
+        }
+#endif
+
+        if (stat & STATUS_ERR_MASK) {
+                dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",
+                                stat);
+                if (stat & STATUS_CRC_READ_ERR) {
+                        data->error = -EILSEQ;
+                } else if (stat & STATUS_CRC_WRITE_ERR) {
+                        u32 err_code = (stat >> 9) & 0x3;
+                        if (err_code == 2) /* No CRC response */
+                                data->error = -ETIMEDOUT;
+                        else
+                                data->error = -EILSEQ;
+                } else if (stat & STATUS_TIME_OUT_READ) {
+                        data->error = -ETIMEDOUT;
+                } else {
+                        data->error = -EIO;
+                }
+        } else {
+                data->bytes_xfered = host->datasize;
+        }
+
+        data_error = data->error;
+
+        host->data = NULL;
+
+        return data_error;
+}
+
+static void mxcmci_read_response(struct mxcmci_host *host, unsigned int stat)
+{
+        struct mmc_command *cmd = host->cmd;
+        int i;
+        u32 a, b, c;
+
+        if (!cmd)
+                return;
+
+        if (stat & STATUS_TIME_OUT_RESP) {
+                dev_dbg(mmc_dev(host->mmc), "CMD TIMEOUT\n");
+                cmd->error = -ETIMEDOUT;
+        } else if (stat & STATUS_RESP_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
+                dev_dbg(mmc_dev(host->mmc), "cmd crc error\n");
+                cmd->error = -EILSEQ;
+        }
+
+        if (cmd->flags & MMC_RSP_PRESENT) {
+                if (cmd->flags & MMC_RSP_136) {
+                        for (i = 0; i < 4; i++) {
+                                a = readw(host->base + MMC_REG_RES_FIFO);
+                                b = readw(host->base + MMC_REG_RES_FIFO);
+                                cmd->resp[i] = a << 16 | b;
+                        }
+                } else {
+                        a = readw(host->base + MMC_REG_RES_FIFO);
+                        b = readw(host->base + MMC_REG_RES_FIFO);
+                        c = readw(host->base + MMC_REG_RES_FIFO);
+                        cmd->resp[0] = a << 24 | b << 8 | c >> 8;
+                }
+        }
+}
+
+static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask)
+{
+        u32 stat;
+        unsigned long timeout = jiffies + HZ;
+
+        do {
+                stat = readl(host->base + MMC_REG_STATUS);
+                if (stat & STATUS_ERR_MASK)
+                        return stat;
+                if (time_after(jiffies, timeout))
+                        return STATUS_TIME_OUT_READ;
+                if (stat & mask)
+                        return 0;
+                cpu_relax();
+        } while (1);
+}
+
+static int mxcmci_pull(struct mxcmci_host *host, void *_buf, int bytes)
+{
+        unsigned int stat;
+        u32 *buf = _buf;
+
+        while (bytes > 3) {
+                stat = mxcmci_poll_status(host,
+                                STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
+                if (stat)
+                        return stat;
+                *buf++ = readl(host->base + MMC_REG_BUFFER_ACCESS);
+                bytes -= 4;
+        }
+
+        if (bytes) {
+                u8 *b = (u8 *)buf;
+                u32 tmp;
+
+                stat = mxcmci_poll_status(host,
+                                STATUS_BUF_READ_RDY | STATUS_READ_OP_DONE);
+                if (stat)
+                        return stat;
+                tmp = readl(host->base + MMC_REG_BUFFER_ACCESS);
+                memcpy(b, &tmp, bytes);
+        }
+
+        return 0;
+}
+
+static int mxcmci_push(struct mxcmci_host *host, void *_buf, int bytes)
+{
+        unsigned int stat;
+        u32 *buf = _buf;
+
+        while (bytes > 3) {
+                stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+                if (stat)
+                        return stat;
+                writel(*buf++, host->base + MMC_REG_BUFFER_ACCESS);
+                bytes -= 4;
+        }
+
+        if (bytes) {
+                u8 *b = (u8 *)buf;
+                u32 tmp;
+
+                stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+                if (stat)
+                        return stat;
+
+                memcpy(&tmp, b, bytes);
+                writel(tmp, host->base + MMC_REG_BUFFER_ACCESS);
+        }
+
+        stat = mxcmci_poll_status(host, STATUS_BUF_WRITE_RDY);
+        if (stat)
+                return stat;
+
+        return 0;
+}
+
+static int mxcmci_transfer_data(struct mxcmci_host *host)
+{
+        struct mmc_data *data = host->req->data;
+        struct scatterlist *sg;
+        int stat, i;
+
+        host->datasize = 0;
+
+        host->data = data;
+        host->datasize = 0;
+
+        if (data->flags & MMC_DATA_READ) {
+                for_each_sg(data->sg, sg, data->sg_len, i) {
+                        stat = mxcmci_pull(host, sg_virt(sg), sg->length);
+                        if (stat)
+                                return stat;
+                        host->datasize += sg->length;
+                }
+        } else {
+                for_each_sg(data->sg, sg, data->sg_len, i) {
+                        stat = mxcmci_push(host, sg_virt(sg), sg->length);
+                        if (stat)
+                                return stat;
+                        host->datasize += sg->length;
+                }
+                stat = mxcmci_poll_status(host, STATUS_WRITE_OP_DONE);
+                if (stat)
+                        return stat;
+        }
+        return 0;
+}
+
+static void mxcmci_datawork(struct work_struct *work)
+{
+        struct mxcmci_host *host = container_of(work, struct mxcmci_host,
+                                                  datawork);
+        int datastat = mxcmci_transfer_data(host);
+        mxcmci_finish_data(host, datastat);
+
+        if (host->req->stop) {
+                if (mxcmci_start_cmd(host, host->req->stop, 0)) {
+                        mxcmci_finish_request(host, host->req);
+                        return;
+                }
+        } else {
+                mxcmci_finish_request(host, host->req);
+        }
+}
+
+#ifdef HAS_DMA
+static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat)
+{
+        struct mmc_data *data = host->data;
+        int data_error;
+
+        if (!data)
+                return;
+
+        data_error = mxcmci_finish_data(host, stat);
+
+        mxcmci_read_response(host, stat);
+        host->cmd = NULL;
+
+        if (host->req->stop) {
+                if (mxcmci_start_cmd(host, host->req->stop, 0)) {
+                        mxcmci_finish_request(host, host->req);
+                        return;
+                }
+        } else {
+                mxcmci_finish_request(host, host->req);
+        }
+}
+#endif /* HAS_DMA */
+
+static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat)
+{
+        mxcmci_read_response(host, stat);
+        host->cmd = NULL;
+
+        if (!host->data && host->req) {
+                mxcmci_finish_request(host, host->req);
+                return;
+        }
+
+        /* For the DMA case the DMA engine handles the data transfer
+         * automatically. For non DMA we have to to it ourselves.
+         * Don't do it in interrupt context though.
+         */
+        if (!mxcmci_use_dma(host) && host->data)
+                schedule_work(&host->datawork);
+
+}
+
+static irqreturn_t mxcmci_irq(int irq, void *devid)
+{
+        struct mxcmci_host *host = devid;
+        u32 stat;
+
+        stat = readl(host->base + MMC_REG_STATUS);
+        writel(stat, host->base + MMC_REG_STATUS);
+
+        dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat);
+
+        if (stat & STATUS_END_CMD_RESP)
+                mxcmci_cmd_done(host, stat);
+#ifdef HAS_DMA
+        if (mxcmci_use_dma(host) &&
+                  (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))
+                mxcmci_data_done(host, stat);
+#endif
+        return IRQ_HANDLED;
+}
+
+static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+        struct mxcmci_host *host = mmc_priv(mmc);
+        unsigned int cmdat = host->cmdat;
+
+        WARN_ON(host->req != NULL);
+
+        host->req = req;
+        host->cmdat &= ~CMD_DAT_CONT_INIT;
+#ifdef HAS_DMA
+        host->do_dma = 1;
+#endif
+        if (req->data) {
+                mxcmci_setup_data(host, req->data);
+
+                cmdat |= CMD_DAT_CONT_DATA_ENABLE;
+
+                if (req->data->flags & MMC_DATA_WRITE)
+                        cmdat |= CMD_DAT_CONT_WRITE;
+        }
+
+        if (mxcmci_start_cmd(host, req->cmd, cmdat))
+                mxcmci_finish_request(host, req);
+}
+
+static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
+{
+        unsigned int divider;
+        int prescaler = 0;
+        unsigned int clk_in = clk_get_rate(host->clk);
+
+        while (prescaler <= 0x800) {
+                for (divider = 1; divider <= 0xF; divider++) {
+                        int x;
+
+                        x = (clk_in / (divider + 1));
+
+                        if (prescaler)
+                                x /= (prescaler * 2);
+
+                        if (x <= clk_ios)
+                                break;
+                }
+                if (divider < 0x10)
+                        break;
+
+                if (prescaler == 0)
+                        prescaler = 1;
+                else
+                        prescaler <<= 1;
+        }
+
+        writew((prescaler << 4) | divider, host->base + MMC_REG_CLK_RATE);
+
+        dev_dbg(mmc_dev(host->mmc), "scaler: %d divider: %d in: %d out: %d\n",
+                        prescaler, divider, clk_in, clk_ios);
+}
+
+static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+        struct mxcmci_host *host = mmc_priv(mmc);
+#ifdef HAS_DMA
+        unsigned int blen;
+        /*
+         * use burstlen of 64 in 4 bit mode (--> reg value  0)
+         * use burstlen of 16 in 1 bit mode (--> reg value 16)
+         */
+        if (ios->bus_width == MMC_BUS_WIDTH_4)
+                blen = 0;
+        else
+                blen = 16;
+
+        imx_dma_config_burstlen(host->dma, blen);
+#endif
+        if (ios->bus_width == MMC_BUS_WIDTH_4)
+                host->cmdat |= CMD_DAT_CONT_BUS_WIDTH_4;
+        else
+                host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
+
+        if (host->power_mode != ios->power_mode) {
+                if (host->pdata && host->pdata->setpower)
+                        host->pdata->setpower(mmc_dev(mmc), ios->vdd);
+                host->power_mode = ios->power_mode;
+                if (ios->power_mode == MMC_POWER_ON)
+                        host->cmdat |= CMD_DAT_CONT_INIT;
+        }
+
+        if (ios->clock) {
+                mxcmci_set_clk_rate(host, ios->clock);
+                writew(STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK);
+        } else {
+                writew(STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK);
+        }
+
+        host->clock = ios->clock;
+}
+
+static irqreturn_t mxcmci_detect_irq(int irq, void *data)
+{
+        struct mmc_host *mmc = data;
+
+        dev_dbg(mmc_dev(mmc), "%s\n", __func__);
+
+        mmc_detect_change(mmc, msecs_to_jiffies(250));
+        return IRQ_HANDLED;
+}
+
+static int mxcmci_get_ro(struct mmc_host *mmc)
+{
+        struct mxcmci_host *host = mmc_priv(mmc);
+
+        if (host->pdata && host->pdata->get_ro)
+                return !!host->pdata->get_ro(mmc_dev(mmc));
+        /*
+         * Board doesn't support read only detection; let the mmc core
+         * decide what to do.
+         */
+        return -ENOSYS;
+}
+
+
+static const struct mmc_host_ops mxcmci_ops = {
+        .request        = mxcmci_request,
+        .set_ios        = mxcmci_set_ios,
+        .get_ro         = mxcmci_get_ro,
+};
+
+static int mxcmci_probe(struct platform_device *pdev)
+{
+        struct mmc_host *mmc;
+        struct mxcmci_host *host = NULL;
+        struct resource *r;
+        int ret = 0, irq;
+
+        printk(KERN_INFO "i.MX SDHC driver\n");
+
+        r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        irq = platform_get_irq(pdev, 0);
+        if (!r || irq < 0)
+                return -EINVAL;
+
+        r = request_mem_region(r->start, resource_size(r), pdev->name);
+        if (!r)
+                return -EBUSY;
+
+        mmc = mmc_alloc_host(sizeof(struct mxcmci_host), &pdev->dev);
+        if (!mmc) {
+                ret = -ENOMEM;
+                goto out_release_mem;
+        }
+
+        mmc->ops = &mxcmci_ops;
+        mmc->caps = MMC_CAP_4_BIT_DATA;
+
+        /* MMC core transfer sizes tunable parameters */
+        mmc->max_hw_segs = 64;
+        mmc->max_phys_segs = 64;
+        mmc->max_blk_size = 2048;
+        mmc->max_blk_count = 65535;
+        mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+        mmc->max_seg_size = mmc->max_seg_size;
+
+        host = mmc_priv(mmc);
+        host->base = ioremap(r->start, resource_size(r));
+        if (!host->base) {
+                ret = -ENOMEM;
+                goto out_free;
+        }
+
+        host->mmc = mmc;
+        host->pdata = pdev->dev.platform_data;
+
+        if (host->pdata && host->pdata->ocr_avail)
+                mmc->ocr_avail = host->pdata->ocr_avail;
+        else
+                mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+        host->res = r;
+        host->irq = irq;
+
+        host->clk = clk_get(&pdev->dev, "sdhc_clk");
+        if (IS_ERR(host->clk)) {
+                ret = PTR_ERR(host->clk);
+                goto out_iounmap;
+        }
+        clk_enable(host->clk);
+
+        mxcmci_softreset(host);
+
+        host->rev_no = readw(host->base + MMC_REG_REV_NO);
+        if (host->rev_no != 0x400) {
+                ret = -ENODEV;
+                dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n",
+                        host->rev_no);
+                goto out_clk_put;
+        }
+
+        mmc->f_min = clk_get_rate(host->clk) >> 7;
+        mmc->f_max = clk_get_rate(host->clk) >> 1;
+
+        /* recommended in data sheet */
+        writew(0x2db4, host->base + MMC_REG_READ_TO);
+
+        writel(0, host->base + MMC_REG_INT_CNTR);
+
+#ifdef HAS_DMA
+        host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW);
+        if (host->dma < 0) {
+                dev_err(mmc_dev(host->mmc), "imx_dma_request_by_prio failed\n");
+                ret = -EBUSY;
+                goto out_clk_put;
+        }
+
+        r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+        if (!r) {
+                ret = -EINVAL;
+                goto out_free_dma;
+        }
+
+        ret = imx_dma_config_channel(host->dma,
+                                     IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
+                                     IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+                                     r->start, 0);
+        if (ret) {
+                dev_err(mmc_dev(host->mmc), "failed to config DMA channel\n");
+                goto out_free_dma;
+        }
+#endif
+        INIT_WORK(&host->datawork, mxcmci_datawork);
+
+        ret = request_irq(host->irq, mxcmci_irq, 0, DRIVER_NAME, host);
+        if (ret)
+                goto out_free_dma;
+
+        platform_set_drvdata(pdev, mmc);
+
+        if (host->pdata && host->pdata->init) {
+                ret = host->pdata->init(&pdev->dev, mxcmci_detect_irq,
+                                host->mmc);
+                if (ret)
+                        goto out_free_irq;
+        }
+
+        mmc_add_host(mmc);
+
+        return 0;
+
+out_free_irq:
+        free_irq(host->irq, host);
+out_free_dma:
+#ifdef HAS_DMA
+        imx_dma_free(host->dma);
+#endif
+out_clk_put:
+        clk_disable(host->clk);
+        clk_put(host->clk);
+out_iounmap:
+        iounmap(host->base);
+out_free:
+        mmc_free_host(mmc);
+out_release_mem:
+        release_mem_region(host->res->start, resource_size(host->res));
+        return ret;
+}
+
+static int mxcmci_remove(struct platform_device *pdev)
+{
+        struct mmc_host *mmc = platform_get_drvdata(pdev);
+        struct mxcmci_host *host = mmc_priv(mmc);
+
+        platform_set_drvdata(pdev, NULL);
+
+        mmc_remove_host(mmc);
+
+        if (host->pdata && host->pdata->exit)
+                host->pdata->exit(&pdev->dev, mmc);
+
+        free_irq(host->irq, host);
+        iounmap(host->base);
+#ifdef HAS_DMA
+        imx_dma_free(host->dma);
+#endif
+        clk_disable(host->clk);
+        clk_put(host->clk);
+
+        release_mem_region(host->res->start, resource_size(host->res));
+        release_resource(host->res);
+
+        mmc_free_host(mmc);
+
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static int mxcmci_suspend(struct platform_device *dev, pm_message_t state)
+{
+        struct mmc_host *mmc = platform_get_drvdata(dev);
+        int ret = 0;
+
+        if (mmc)
+                ret = mmc_suspend_host(mmc, state);
+
+        return ret;
+}
+
+static int mxcmci_resume(struct platform_device *dev)
+{
+        struct mmc_host *mmc = platform_get_drvdata(dev);
+        struct mxcmci_host *host;
+        int ret = 0;
+
+        if (mmc) {
+                host = mmc_priv(mmc);
+                ret = mmc_resume_host(mmc);
+        }
+
+        return ret;
+}
+#else
+#define mxcmci_suspend  NULL
+#define mxcmci_resume   NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver mxcmci_driver = {
+        .probe          = mxcmci_probe,
+        .remove         = mxcmci_remove,
+        .suspend        = mxcmci_suspend,
+        .resume         = mxcmci_resume,
+        .driver         = {
+                .name           = DRIVER_NAME,
+                .owner          = THIS_MODULE,
+        }
+};
+
+static int __init mxcmci_init(void)
+{
+        return platform_driver_register(&mxcmci_driver);
+}
+
+static void __exit mxcmci_exit(void)
+{
+        platform_driver_unregister(&mxcmci_driver);
+}
+
+module_init(mxcmci_init);
+module_exit(mxcmci_exit);
+
+MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver");
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:imx-mmc");
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 3c5483b75da4..9702ad3774cf 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -180,7 +180,15 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
         else
                 DALGN &= ~(1 << host->dma);
         DDADR(host->dma) = host->sg_dma;
-        DCSR(host->dma) = DCSR_RUN;
+
+        /*
+         * workaround for erratum #91:
+         * only start DMA now if we are doing a read,
+         * otherwise we wait until CMD/RESP has finished
+         * before starting DMA.
+         */
+        if (!cpu_is_pxa27x() || data->flags & MMC_DATA_READ)
+                DCSR(host->dma) = DCSR_RUN;
 }
 
 static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
@@ -251,23 +259,28 @@ static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
         if (stat & STAT_TIME_OUT_RESPONSE) {
                 cmd->error = -ETIMEDOUT;
         } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
-#ifdef CONFIG_PXA27x
                 /*
                  * workaround for erratum #42:
                  * Intel PXA27x Family Processor Specification Update Rev 001
                  * A bogus CRC error can appear if the msb of a 136 bit
                  * response is a one.
                  */
-                if (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000) {
+                if (cpu_is_pxa27x() &&
+                    (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000))
                         pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
-                } else
-#endif
-                cmd->error = -EILSEQ;
+                else
+                        cmd->error = -EILSEQ;
         }
 
         pxamci_disable_irq(host, END_CMD_RES);
         if (host->data && !cmd->error) {
                 pxamci_enable_irq(host, DATA_TRAN_DONE);
+                /*
+                 * workaround for erratum #91, if doing write
+                 * enable DMA late
+                 */
+                if (cpu_is_pxa27x() && host->data->flags & MMC_DATA_WRITE)
+                        DCSR(host->dma) = DCSR_RUN;
         } else {
                 pxamci_finish_request(host, host->mrq);
         }
diff --git a/drivers/mmc/host/ricoh_mmc.c b/drivers/mmc/host/ricoh_mmc.c
index be9e7b32b34e..f62790513322 100644
--- a/drivers/mmc/host/ricoh_mmc.c
+++ b/drivers/mmc/host/ricoh_mmc.c
@@ -196,7 +196,7 @@ static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
         pci_set_drvdata(pdev, NULL);
 }
 
-static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
+static int ricoh_mmc_suspend_late(struct pci_dev *pdev, pm_message_t state)
 {
         struct pci_dev *fw_dev = NULL;
 
@@ -210,7 +210,7 @@ static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
         return 0;
 }
 
-static int ricoh_mmc_resume(struct pci_dev *pdev)
+static int ricoh_mmc_resume_early(struct pci_dev *pdev)
 {
         struct pci_dev *fw_dev = NULL;
 
@@ -229,8 +229,8 @@ static struct pci_driver ricoh_mmc_driver = {
         .id_table =     pci_ids,
         .probe =        ricoh_mmc_probe,
         .remove =       __devexit_p(ricoh_mmc_remove),
-        .suspend =      ricoh_mmc_suspend,
-        .resume =       ricoh_mmc_resume,
+        .suspend_late = ricoh_mmc_suspend_late,
+        .resume_early = ricoh_mmc_resume_early,
 };
 
 /*****************************************************************************\