mmc: core: fix the signaling 1.8V for HS200

Currently only 1.2V is treated for HS200 mode. If the host has only
1.8V I/O capability not 1.2V, mmc_set_signal_voltage can't be called
for 1.8V HS200. EXT_CSD_CARD_TYPE_SDR_1_8V needs to be considered.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

1 files changed, 7 insertions, 5 deletions

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 0477769a8841..2a9b7b1a4801 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -728,7 +728,7 @@ static int mmc_select_powerclass(struct mmc_card *card,
  */
 static int mmc_select_hs200(struct mmc_card *card)
 {
-        int idx, err = 0;
+        int idx, err = -EINVAL;
         struct mmc_host *host;
         static unsigned ext_csd_bits[] = {
                 EXT_CSD_BUS_WIDTH_4,
@@ -744,10 +744,12 @@ static int mmc_select_hs200(struct mmc_card *card)
         host = card->host;
 
         if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
-            host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
-                if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0))
-                        err = mmc_set_signal_voltage(host,
-                                                     MMC_SIGNAL_VOLTAGE_180, 0);
+                        host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
+                err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0);
+
+        if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V &&
+                        host->caps2 & MMC_CAP2_HS200_1_8V_SDR)
+                err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, 0);
 
         /* If fails try again during next card power cycle */
         if (err)