Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

5 files changed, 10 insertions, 10 deletions

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 80bc9a5c25cc..ea3888b65d5d 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -127,7 +127,7 @@ struct atmel_mci_dma {
  * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
  * interrupts must be disabled and @data_status updated with a
  * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
- * CMDRDY interupt must be disabled and @cmd_status updated with a
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
  * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
  * bytes_xfered field of @data must be written. This is ensured by
  * using barriers.
@@ -1082,7 +1082,7 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
         /*
          * Update the MMC clock rate if necessary. This may be
          * necessary if set_ios() is called when a different slot is
-         * busy transfering data.
+         * busy transferring data.
          */
         if (host->need_clock_update) {
                 mci_writel(host, MR, host->mode_reg);
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 2f7fc0c5146f..7c1e16aaf17f 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -99,7 +99,7 @@
 #define r1b_timeout             (HZ * 3)
 
 /* One of the critical speed parameters is the amount of data which may
- * be transfered in one command. If this value is too low, the SD card
+ * be transferred in one command. If this value is too low, the SD card
  * controller has to do multiple partial block writes (argggh!). With
  * today (2008) SD cards there is little speed gain if we transfer more
  * than 64 KBytes at a time. So use this value until there is any indication
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 1ccd4b256cee..a04f87d7ee3d 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -874,7 +874,7 @@ static void finalize_request(struct s3cmci_host *host)
         if (!mrq->data)
                 goto request_done;
 
-        /* Calulate the amout of bytes transfer if there was no error */
+        /* Calculate the amout of bytes transfer if there was no error */
         if (mrq->data->error == 0) {
                 mrq->data->bytes_xfered =
                         (mrq->data->blocks * mrq->data->blksz);
@@ -882,7 +882,7 @@ static void finalize_request(struct s3cmci_host *host)
                 mrq->data->bytes_xfered = 0;
         }
 
-        /* If we had an error while transfering data we flush the
+        /* If we had an error while transferring data we flush the
          * DMA channel and the fifo to clear out any garbage. */
         if (mrq->data->error != 0) {
                 if (s3cmci_host_usedma(host))
@@ -980,7 +980,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
 
         if ((data->blksz & 3) != 0) {
                 /* We cannot deal with unaligned blocks with more than
-                 * one block being transfered. */
+                 * one block being transferred. */
 
                 if (data->blocks > 1) {
                         pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz);
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 6ae8d2f00ec7..62d37de6de76 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -355,7 +355,7 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command
 /*
  * This chip always returns (at least?) as much data as you ask for.
  * I'm unsure what happens if you ask for less than a block. This should be
- * looked into to ensure that a funny length read doesnt hose the controller.
+ * looked into to ensure that a funny length read doesn't hose the controller.
  */
 static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 {
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 7fca0a386ba0..62e5a4d171e1 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -484,7 +484,7 @@ static void wbsd_fill_fifo(struct wbsd_host *host)
 
         /*
          * Check that we aren't being called after the
-         * entire buffer has been transfered.
+         * entire buffer has been transferred.
          */
         if (host->num_sg == 0)
                 return;
@@ -828,7 +828,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
         /*
          * If this is a data transfer the request
          * will be finished after the data has
-         * transfered.
+         * transferred.
          */
         if (cmd->data && !cmd->error) {
                 /*
@@ -904,7 +904,7 @@ static void wbsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
                         setup &= ~WBSD_DAT3_H;
 
                         /*
-                         * We cannot resume card detection immediatly
+                         * We cannot resume card detection immediately
                          * because of capacitance and delays in the chip.
                          */
                         mod_timer(&host->ignore_timer, jiffies + HZ / 100);