V4L/DVB (12344): em28xx: fix support for Plextor ConvertX PX-TV100U

This device uses msp34xx and uses 2.048 MHz frequency for I2S
communication.

Thanks to Angelo Cano <acano@fastmail.fm> for pointing the issues with
this device and proposing an approach for fixing the issue.

Tested-by: Angelo Cano <acano@fastmail.fm>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 8 insertions, 4 deletions

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index bc213a1f9c1f..d0b033bce867 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -622,22 +622,27 @@ struct em28xx_board em28xx_boards[] = {
         },
         [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
                 .name         = "Plextor ConvertX PX-TV100U",
-                .valid        = EM28XX_BOARD_NOT_VALIDATED,
                 .tuner_type   = TUNER_TNF_5335MF,
+                .xclk         = EM28XX_XCLK_I2S_MSB_TIMING |
+                                EM28XX_XCLK_FREQUENCY_12MHZ,
                 .tda9887_conf = TDA9887_PRESENT,
                 .decoder      = EM28XX_TVP5150,
+                .has_msp34xx  = 1,
                 .input        = { {
                         .type     = EM28XX_VMUX_TELEVISION,
                         .vmux     = TVP5150_COMPOSITE0,
                         .amux     = EM28XX_AMUX_LINE_IN,
+                        .gpio     = pinnacle_hybrid_pro_analog,
                 }, {
                         .type     = EM28XX_VMUX_COMPOSITE1,
                         .vmux     = TVP5150_COMPOSITE1,
                         .amux     = EM28XX_AMUX_LINE_IN,
+                        .gpio     = pinnacle_hybrid_pro_analog,
                 }, {
                         .type     = EM28XX_VMUX_SVIDEO,
                         .vmux     = TVP5150_SVIDEO,
                         .amux     = EM28XX_AMUX_LINE_IN,
+                        .gpio     = pinnacle_hybrid_pro_analog,
                 } },
         },
 
@@ -1877,9 +1882,8 @@ void em28xx_pre_card_setup(struct em28xx *dev)
         /* request some modules */
         switch (dev->model) {
         case EM2861_BOARD_PLEXTOR_PX_TV100U:
-                /* FIXME guess */
-                /* Turn on analog audio output */
-                em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+                /* Sets the msp34xx I2S speed */
+                dev->i2s_speed = 2048000;
                 break;
         case EM2861_BOARD_KWORLD_PVRTV_300U:
         case EM2880_BOARD_KWORLD_DVB_305U: