[media] rename most media/video usb drivers to media/usb

Rename all USB drivers with their own directory under
drivers/media/video into drivers/media/usb and update the
building system.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 1260 insertions, 0 deletions

diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c
new file mode 100644
index 000000000000..bed07a6c33f8
--- /dev/null
+++ b/drivers/media/usb/em28xx/em28xx-core.c
@@ -0,0 +1,1260 @@
+/*
+   em28xx-core.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
+
+   Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
+                      Markus Rechberger <mrechberger@gmail.com>
+                      Mauro Carvalho Chehab <mchehab@infradead.org>
+                      Sascha Sommer <saschasommer@freenet.de>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/vmalloc.h>
+#include <sound/ac97_codec.h>
+#include <media/v4l2-common.h>
+
+#include "em28xx.h"
+
+/* #define ENABLE_DEBUG_ISOC_FRAMES */
+
+static unsigned int core_debug;
+module_param(core_debug, int, 0644);
+MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
+
+#define em28xx_coredbg(fmt, arg...) do {\
+        if (core_debug) \
+                printk(KERN_INFO "%s %s :"fmt, \
+                         dev->name, __func__ , ##arg); } while (0)
+
+static unsigned int reg_debug;
+module_param(reg_debug, int, 0644);
+MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]");
+
+#define em28xx_regdbg(fmt, arg...) do {\
+        if (reg_debug) \
+                printk(KERN_INFO "%s %s :"fmt, \
+                         dev->name, __func__ , ##arg); } while (0)
+
+static int alt;
+module_param(alt, int, 0644);
+MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
+
+static unsigned int disable_vbi;
+module_param(disable_vbi, int, 0644);
+MODULE_PARM_DESC(disable_vbi, "disable vbi support");
+
+/* FIXME */
+#define em28xx_isocdbg(fmt, arg...) do {\
+        if (core_debug) \
+                printk(KERN_INFO "%s %s :"fmt, \
+                         dev->name, __func__ , ##arg); } while (0)
+
+/*
+ * em28xx_read_reg_req()
+ * reads data from the usb device specifying bRequest
+ */
+int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
+                                   char *buf, int len)
+{
+        int ret;
+        int pipe = usb_rcvctrlpipe(dev->udev, 0);
+
+        if (dev->state & DEV_DISCONNECTED)
+                return -ENODEV;
+
+        if (len > URB_MAX_CTRL_SIZE)
+                return -EINVAL;
+
+        if (reg_debug) {
+                printk(KERN_DEBUG "(pipe 0x%08x): "
+                        "IN:  %02x %02x %02x %02x %02x %02x %02x %02x ",
+                        pipe,
+                        USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                        req, 0, 0,
+                        reg & 0xff, reg >> 8,
+                        len & 0xff, len >> 8);
+        }
+
+        mutex_lock(&dev->ctrl_urb_lock);
+        ret = usb_control_msg(dev->udev, pipe, req,
+                              USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                              0x0000, reg, dev->urb_buf, len, HZ);
+        if (ret < 0) {
+                if (reg_debug)
+                        printk(" failed!\n");
+                mutex_unlock(&dev->ctrl_urb_lock);
+                return ret;
+        }
+
+        if (len)
+                memcpy(buf, dev->urb_buf, len);
+
+        mutex_unlock(&dev->ctrl_urb_lock);
+
+        if (reg_debug) {
+                int byte;
+
+                printk("<<<");
+                for (byte = 0; byte < len; byte++)
+                        printk(" %02x", (unsigned char)buf[byte]);
+                printk("\n");
+        }
+
+        return ret;
+}
+
+/*
+ * em28xx_read_reg_req()
+ * reads data from the usb device specifying bRequest
+ */
+int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
+{
+        int ret;
+        u8 val;
+
+        ret = em28xx_read_reg_req_len(dev, req, reg, &val, 1);
+        if (ret < 0)
+                return ret;
+
+        return val;
+}
+
+int em28xx_read_reg(struct em28xx *dev, u16 reg)
+{
+        return em28xx_read_reg_req(dev, USB_REQ_GET_STATUS, reg);
+}
+EXPORT_SYMBOL_GPL(em28xx_read_reg);
+
+/*
+ * em28xx_write_regs_req()
+ * sends data to the usb device, specifying bRequest
+ */
+int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
+                                 int len)
+{
+        int ret;
+        int pipe = usb_sndctrlpipe(dev->udev, 0);
+
+        if (dev->state & DEV_DISCONNECTED)
+                return -ENODEV;
+
+        if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
+                return -EINVAL;
+
+        if (reg_debug) {
+                int byte;
+
+                printk(KERN_DEBUG "(pipe 0x%08x): "
+                        "OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
+                        pipe,
+                        USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                        req, 0, 0,
+                        reg & 0xff, reg >> 8,
+                        len & 0xff, len >> 8);
+
+                for (byte = 0; byte < len; byte++)
+                        printk(" %02x", (unsigned char)buf[byte]);
+                printk("\n");
+        }
+
+        mutex_lock(&dev->ctrl_urb_lock);
+        memcpy(dev->urb_buf, buf, len);
+        ret = usb_control_msg(dev->udev, pipe, req,
+                              USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                              0x0000, reg, dev->urb_buf, len, HZ);
+        mutex_unlock(&dev->ctrl_urb_lock);
+
+        if (dev->wait_after_write)
+                msleep(dev->wait_after_write);
+
+        return ret;
+}
+
+int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len)
+{
+        int rc;
+
+        rc = em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
+
+        /* Stores GPO/GPIO values at the cache, if changed
+           Only write values should be stored, since input on a GPIO
+           register will return the input bits.
+           Not sure what happens on reading GPO register.
+         */
+        if (rc >= 0) {
+                if (reg == dev->reg_gpo_num)
+                        dev->reg_gpo = buf[0];
+                else if (reg == dev->reg_gpio_num)
+                        dev->reg_gpio = buf[0];
+        }
+
+        return rc;
+}
+EXPORT_SYMBOL_GPL(em28xx_write_regs);
+
+/* Write a single register */
+int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val)
+{
+        return em28xx_write_regs(dev, reg, &val, 1);
+}
+EXPORT_SYMBOL_GPL(em28xx_write_reg);
+
+/*
+ * em28xx_write_reg_bits()
+ * sets only some bits (specified by bitmask) of a register, by first reading
+ * the actual value
+ */
+int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
+                                 u8 bitmask)
+{
+        int oldval;
+        u8 newval;
+
+        /* Uses cache for gpo/gpio registers */
+        if (reg == dev->reg_gpo_num)
+                oldval = dev->reg_gpo;
+        else if (reg == dev->reg_gpio_num)
+                oldval = dev->reg_gpio;
+        else
+                oldval = em28xx_read_reg(dev, reg);
+
+        if (oldval < 0)
+                return oldval;
+
+        newval = (((u8) oldval) & ~bitmask) | (val & bitmask);
+
+        return em28xx_write_regs(dev, reg, &newval, 1);
+}
+EXPORT_SYMBOL_GPL(em28xx_write_reg_bits);
+
+/*
+ * em28xx_is_ac97_ready()
+ * Checks if ac97 is ready
+ */
+static int em28xx_is_ac97_ready(struct em28xx *dev)
+{
+        int ret, i;
+
+        /* Wait up to 50 ms for AC97 command to complete */
+        for (i = 0; i < 10; i++, msleep(5)) {
+                ret = em28xx_read_reg(dev, EM28XX_R43_AC97BUSY);
+                if (ret < 0)
+                        return ret;
+
+                if (!(ret & 0x01))
+                        return 0;
+        }
+
+        em28xx_warn("AC97 command still being executed: not handled properly!\n");
+        return -EBUSY;
+}
+
+/*
+ * em28xx_read_ac97()
+ * write a 16 bit value to the specified AC97 address (LSB first!)
+ */
+int em28xx_read_ac97(struct em28xx *dev, u8 reg)
+{
+        int ret;
+        u8 addr = (reg & 0x7f) | 0x80;
+        u16 val;
+
+        ret = em28xx_is_ac97_ready(dev);
+        if (ret < 0)
+                return ret;
+
+        ret = em28xx_write_regs(dev, EM28XX_R42_AC97ADDR, &addr, 1);
+        if (ret < 0)
+                return ret;
+
+        ret = dev->em28xx_read_reg_req_len(dev, 0, EM28XX_R40_AC97LSB,
+                                           (u8 *)&val, sizeof(val));
+
+        if (ret < 0)
+                return ret;
+        return le16_to_cpu(val);
+}
+EXPORT_SYMBOL_GPL(em28xx_read_ac97);
+
+/*
+ * em28xx_write_ac97()
+ * write a 16 bit value to the specified AC97 address (LSB first!)
+ */
+int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val)
+{
+        int ret;
+        u8 addr = reg & 0x7f;
+        __le16 value;
+
+        value = cpu_to_le16(val);
+
+        ret = em28xx_is_ac97_ready(dev);
+        if (ret < 0)
+                return ret;
+
+        ret = em28xx_write_regs(dev, EM28XX_R40_AC97LSB, (u8 *) &value, 2);
+        if (ret < 0)
+                return ret;
+
+        ret = em28xx_write_regs(dev, EM28XX_R42_AC97ADDR, &addr, 1);
+        if (ret < 0)
+                return ret;
+
+        return 0;
+}
+EXPORT_SYMBOL_GPL(em28xx_write_ac97);
+
+struct em28xx_vol_itable {
+        enum em28xx_amux mux;
+        u8               reg;
+};
+
+static struct em28xx_vol_itable inputs[] = {
+        { EM28XX_AMUX_VIDEO,    AC97_VIDEO      },
+        { EM28XX_AMUX_LINE_IN,  AC97_LINE       },
+        { EM28XX_AMUX_PHONE,    AC97_PHONE      },
+        { EM28XX_AMUX_MIC,      AC97_MIC        },
+        { EM28XX_AMUX_CD,       AC97_CD         },
+        { EM28XX_AMUX_AUX,      AC97_AUX        },
+        { EM28XX_AMUX_PCM_OUT,  AC97_PCM        },
+};
+
+static int set_ac97_input(struct em28xx *dev)
+{
+        int ret, i;
+        enum em28xx_amux amux = dev->ctl_ainput;
+
+        /* EM28XX_AMUX_VIDEO2 is a special case used to indicate that
+           em28xx should point to LINE IN, while AC97 should use VIDEO
+         */
+        if (amux == EM28XX_AMUX_VIDEO2)
+                amux = EM28XX_AMUX_VIDEO;
+
+        /* Mute all entres but the one that were selected */
+        for (i = 0; i < ARRAY_SIZE(inputs); i++) {
+                if (amux == inputs[i].mux)
+                        ret = em28xx_write_ac97(dev, inputs[i].reg, 0x0808);
+                else
+                        ret = em28xx_write_ac97(dev, inputs[i].reg, 0x8000);
+
+                if (ret < 0)
+                        em28xx_warn("couldn't setup AC97 register %d\n",
+                                     inputs[i].reg);
+        }
+        return 0;
+}
+
+static int em28xx_set_audio_source(struct em28xx *dev)
+{
+        int ret;
+        u8 input;
+
+        if (dev->board.is_em2800) {
+                if (dev->ctl_ainput == EM28XX_AMUX_VIDEO)
+                        input = EM2800_AUDIO_SRC_TUNER;
+                else
+                        input = EM2800_AUDIO_SRC_LINE;
+
+                ret = em28xx_write_regs(dev, EM2800_R08_AUDIOSRC, &input, 1);
+                if (ret < 0)
+                        return ret;
+        }
+
+        if (dev->board.has_msp34xx)
+                input = EM28XX_AUDIO_SRC_TUNER;
+        else {
+                switch (dev->ctl_ainput) {
+                case EM28XX_AMUX_VIDEO:
+                        input = EM28XX_AUDIO_SRC_TUNER;
+                        break;
+                default:
+                        input = EM28XX_AUDIO_SRC_LINE;
+                        break;
+                }
+        }
+
+        if (dev->board.mute_gpio && dev->mute)
+                em28xx_gpio_set(dev, dev->board.mute_gpio);
+        else
+                em28xx_gpio_set(dev, INPUT(dev->ctl_input)->gpio);
+
+        ret = em28xx_write_reg_bits(dev, EM28XX_R0E_AUDIOSRC, input, 0xc0);
+        if (ret < 0)
+                return ret;
+        msleep(5);
+
+        switch (dev->audio_mode.ac97) {
+        case EM28XX_NO_AC97:
+                break;
+        default:
+                ret = set_ac97_input(dev);
+        }
+
+        return ret;
+}
+
+struct em28xx_vol_otable {
+        enum em28xx_aout mux;
+        u8               reg;
+};
+
+static const struct em28xx_vol_otable outputs[] = {
+        { EM28XX_AOUT_MASTER, AC97_MASTER               },
+        { EM28XX_AOUT_LINE,   AC97_HEADPHONE            },
+        { EM28XX_AOUT_MONO,   AC97_MASTER_MONO          },
+        { EM28XX_AOUT_LFE,    AC97_CENTER_LFE_MASTER    },
+        { EM28XX_AOUT_SURR,   AC97_SURROUND_MASTER      },
+};
+
+int em28xx_audio_analog_set(struct em28xx *dev)
+{
+        int ret, i;
+        u8 xclk;
+
+        if (!dev->audio_mode.has_audio)
+                return 0;
+
+        /* It is assumed that all devices use master volume for output.
+           It would be possible to use also line output.
+         */
+        if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
+                /* Mute all outputs */
+                for (i = 0; i < ARRAY_SIZE(outputs); i++) {
+                        ret = em28xx_write_ac97(dev, outputs[i].reg, 0x8000);
+                        if (ret < 0)
+                                em28xx_warn("couldn't setup AC97 register %d\n",
+                                     outputs[i].reg);
+                }
+        }
+
+        xclk = dev->board.xclk & 0x7f;
+        if (!dev->mute)
+                xclk |= EM28XX_XCLK_AUDIO_UNMUTE;
+
+        ret = em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
+        if (ret < 0)
+                return ret;
+        msleep(10);
+
+        /* Selects the proper audio input */
+        ret = em28xx_set_audio_source(dev);
+
+        /* Sets volume */
+        if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
+                int vol;
+
+                em28xx_write_ac97(dev, AC97_POWERDOWN, 0x4200);
+                em28xx_write_ac97(dev, AC97_EXTENDED_STATUS, 0x0031);
+                em28xx_write_ac97(dev, AC97_PCM_LR_ADC_RATE, 0xbb80);
+
+                /* LSB: left channel - both channels with the same level */
+                vol = (0x1f - dev->volume) | ((0x1f - dev->volume) << 8);
+
+                /* Mute device, if needed */
+                if (dev->mute)
+                        vol |= 0x8000;
+
+                /* Sets volume */
+                for (i = 0; i < ARRAY_SIZE(outputs); i++) {
+                        if (dev->ctl_aoutput & outputs[i].mux)
+                                ret = em28xx_write_ac97(dev, outputs[i].reg,
+                                                        vol);
+                        if (ret < 0)
+                                em28xx_warn("couldn't setup AC97 register %d\n",
+                                     outputs[i].reg);
+                }
+
+                if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) {
+                        int sel = ac97_return_record_select(dev->ctl_aoutput);
+
+                        /* Use the same input for both left and right
+                           channels */
+                        sel |= (sel << 8);
+
+                        em28xx_write_ac97(dev, AC97_REC_SEL, sel);
+                }
+        }
+
+        return ret;
+}
+EXPORT_SYMBOL_GPL(em28xx_audio_analog_set);
+
+int em28xx_audio_setup(struct em28xx *dev)
+{
+        int vid1, vid2, feat, cfg;
+        u32 vid;
+
+        if (dev->chip_id == CHIP_ID_EM2870 || dev->chip_id == CHIP_ID_EM2874
+                || dev->chip_id == CHIP_ID_EM28174) {
+                /* Digital only device - don't load any alsa module */
+                dev->audio_mode.has_audio = false;
+                dev->has_audio_class = false;
+                dev->has_alsa_audio = false;
+                return 0;
+        }
+
+        dev->audio_mode.has_audio = true;
+
+        /* See how this device is configured */
+        cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG);
+        em28xx_info("Config register raw data: 0x%02x\n", cfg);
+        if (cfg < 0) {
+                /* Register read error?  */
+                cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */
+        } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) {
+                /* The device doesn't have vendor audio at all */
+                dev->has_alsa_audio = false;
+                dev->audio_mode.has_audio = false;
+                return 0;
+        } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+                   EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
+                em28xx_info("I2S Audio (3 sample rates)\n");
+                dev->audio_mode.i2s_3rates = 1;
+        } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+                   EM28XX_CHIPCFG_I2S_5_SAMPRATES) {
+                em28xx_info("I2S Audio (5 sample rates)\n");
+                dev->audio_mode.i2s_5rates = 1;
+        }
+
+        if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) != EM28XX_CHIPCFG_AC97) {
+                /* Skip the code that does AC97 vendor detection */
+                dev->audio_mode.ac97 = EM28XX_NO_AC97;
+                goto init_audio;
+        }
+
+        dev->audio_mode.ac97 = EM28XX_AC97_OTHER;
+
+        vid1 = em28xx_read_ac97(dev, AC97_VENDOR_ID1);
+        if (vid1 < 0) {
+                /*
+                 * Device likely doesn't support AC97
+                 * Note: (some) em2800 devices without eeprom reports 0x91 on
+                 *       CHIPCFG register, even not having an AC97 chip
+                 */
+                em28xx_warn("AC97 chip type couldn't be determined\n");
+                dev->audio_mode.ac97 = EM28XX_NO_AC97;
+                dev->has_alsa_audio = false;
+                dev->audio_mode.has_audio = false;
+                goto init_audio;
+        }
+
+        vid2 = em28xx_read_ac97(dev, AC97_VENDOR_ID2);
+        if (vid2 < 0)
+                goto init_audio;
+
+        vid = vid1 << 16 | vid2;
+
+        dev->audio_mode.ac97_vendor_id = vid;
+        em28xx_warn("AC97 vendor ID = 0x%08x\n", vid);
+
+        feat = em28xx_read_ac97(dev, AC97_RESET);
+        if (feat < 0)
+                goto init_audio;
+
+        dev->audio_mode.ac97_feat = feat;
+        em28xx_warn("AC97 features = 0x%04x\n", feat);
+
+        /* Try to identify what audio processor we have */
+        if (((vid == 0xffffffff) || (vid == 0x83847650)) && (feat == 0x6a90))
+                dev->audio_mode.ac97 = EM28XX_AC97_EM202;
+        else if ((vid >> 8) == 0x838476)
+                dev->audio_mode.ac97 = EM28XX_AC97_SIGMATEL;
+
+init_audio:
+        /* Reports detected AC97 processor */
+        switch (dev->audio_mode.ac97) {
+        case EM28XX_NO_AC97:
+                em28xx_info("No AC97 audio processor\n");
+                break;
+        case EM28XX_AC97_EM202:
+                em28xx_info("Empia 202 AC97 audio processor detected\n");
+                break;
+        case EM28XX_AC97_SIGMATEL:
+                em28xx_info("Sigmatel audio processor detected(stac 97%02x)\n",
+                            dev->audio_mode.ac97_vendor_id & 0xff);
+                break;
+        case EM28XX_AC97_OTHER:
+                em28xx_warn("Unknown AC97 audio processor detected!\n");
+                break;
+        default:
+                break;
+        }
+
+        return em28xx_audio_analog_set(dev);
+}
+EXPORT_SYMBOL_GPL(em28xx_audio_setup);
+
+int em28xx_colorlevels_set_default(struct em28xx *dev)
+{
+        em28xx_write_reg(dev, EM28XX_R20_YGAIN, 0x10);  /* contrast */
+        em28xx_write_reg(dev, EM28XX_R21_YOFFSET, 0x00);        /* brightness */
+        em28xx_write_reg(dev, EM28XX_R22_UVGAIN, 0x10); /* saturation */
+        em28xx_write_reg(dev, EM28XX_R23_UOFFSET, 0x00);
+        em28xx_write_reg(dev, EM28XX_R24_VOFFSET, 0x00);
+        em28xx_write_reg(dev, EM28XX_R25_SHARPNESS, 0x00);
+
+        em28xx_write_reg(dev, EM28XX_R14_GAMMA, 0x20);
+        em28xx_write_reg(dev, EM28XX_R15_RGAIN, 0x20);
+        em28xx_write_reg(dev, EM28XX_R16_GGAIN, 0x20);
+        em28xx_write_reg(dev, EM28XX_R17_BGAIN, 0x20);
+        em28xx_write_reg(dev, EM28XX_R18_ROFFSET, 0x00);
+        em28xx_write_reg(dev, EM28XX_R19_GOFFSET, 0x00);
+        return em28xx_write_reg(dev, EM28XX_R1A_BOFFSET, 0x00);
+}
+
+int em28xx_capture_start(struct em28xx *dev, int start)
+{
+        int rc;
+
+        if (dev->chip_id == CHIP_ID_EM2874 ||
+            dev->chip_id == CHIP_ID_EM2884 ||
+            dev->chip_id == CHIP_ID_EM28174) {
+                /* The Transport Stream Enable Register moved in em2874 */
+                if (!start) {
+                        rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
+                                                   0x00,
+                                                   EM2874_TS1_CAPTURE_ENABLE);
+                        return rc;
+                }
+
+                /* Enable Transport Stream */
+                rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
+                                           EM2874_TS1_CAPTURE_ENABLE,
+                                           EM2874_TS1_CAPTURE_ENABLE);
+                return rc;
+        }
+
+
+        /* FIXME: which is the best order? */
+        /* video registers are sampled by VREF */
+        rc = em28xx_write_reg_bits(dev, EM28XX_R0C_USBSUSP,
+                                   start ? 0x10 : 0x00, 0x10);
+        if (rc < 0)
+                return rc;
+
+        if (!start) {
+                /* disable video capture */
+                rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x27);
+                return rc;
+        }
+
+        if (dev->board.is_webcam)
+                rc = em28xx_write_reg(dev, 0x13, 0x0c);
+
+        /* enable video capture */
+        rc = em28xx_write_reg(dev, 0x48, 0x00);
+
+        if (dev->mode == EM28XX_ANALOG_MODE)
+                rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
+        else
+                rc = em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
+
+        msleep(6);
+
+        return rc;
+}
+
+int em28xx_vbi_supported(struct em28xx *dev)
+{
+        /* Modprobe option to manually disable */
+        if (disable_vbi == 1)
+                return 0;
+
+        if (dev->chip_id == CHIP_ID_EM2860 ||
+            dev->chip_id == CHIP_ID_EM2883)
+                return 1;
+
+        /* Version of em28xx that does not support VBI */
+        return 0;
+}
+
+int em28xx_set_outfmt(struct em28xx *dev)
+{
+        int ret;
+        u8 vinctrl;
+
+        ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
+                                dev->format->reg | 0x20, 0xff);
+        if (ret < 0)
+                        return ret;
+
+        ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode);
+        if (ret < 0)
+                return ret;
+
+        vinctrl = dev->vinctl;
+        if (em28xx_vbi_supported(dev) == 1) {
+                vinctrl |= EM28XX_VINCTRL_VBI_RAW;
+                em28xx_write_reg(dev, EM28XX_R34_VBI_START_H, 0x00);
+                em28xx_write_reg(dev, EM28XX_R36_VBI_WIDTH, dev->vbi_width/4);
+                em28xx_write_reg(dev, EM28XX_R37_VBI_HEIGHT, dev->vbi_height);
+                if (dev->norm & V4L2_STD_525_60) {
+                        /* NTSC */
+                        em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x09);
+                } else if (dev->norm & V4L2_STD_625_50) {
+                        /* PAL */
+                        em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x07);
+                }
+        }
+
+        return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctrl);
+}
+
+static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
+                                  u8 ymin, u8 ymax)
+{
+        em28xx_coredbg("em28xx Scale: (%d,%d)-(%d,%d)\n",
+                        xmin, ymin, xmax, ymax);
+
+        em28xx_write_regs(dev, EM28XX_R28_XMIN, &xmin, 1);
+        em28xx_write_regs(dev, EM28XX_R29_XMAX, &xmax, 1);
+        em28xx_write_regs(dev, EM28XX_R2A_YMIN, &ymin, 1);
+        return em28xx_write_regs(dev, EM28XX_R2B_YMAX, &ymax, 1);
+}
+
+static int em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart,
+                                   u16 width, u16 height)
+{
+        u8 cwidth = width;
+        u8 cheight = height;
+        u8 overflow = (height >> 7 & 0x02) | (width >> 8 & 0x01);
+
+        em28xx_coredbg("em28xx Area Set: (%d,%d)\n",
+                        (width | (overflow & 2) << 7),
+                        (height | (overflow & 1) << 8));
+
+        em28xx_write_regs(dev, EM28XX_R1C_HSTART, &hstart, 1);
+        em28xx_write_regs(dev, EM28XX_R1D_VSTART, &vstart, 1);
+        em28xx_write_regs(dev, EM28XX_R1E_CWIDTH, &cwidth, 1);
+        em28xx_write_regs(dev, EM28XX_R1F_CHEIGHT, &cheight, 1);
+        return em28xx_write_regs(dev, EM28XX_R1B_OFLOW, &overflow, 1);
+}
+
+static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
+{
+        u8 mode;
+        /* the em2800 scaler only supports scaling down to 50% */
+
+        if (dev->board.is_em2800) {
+                mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
+        } else {
+                u8 buf[2];
+
+                buf[0] = h;
+                buf[1] = h >> 8;
+                em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2);
+
+                buf[0] = v;
+                buf[1] = v >> 8;
+                em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
+                /* it seems that both H and V scalers must be active
+                   to work correctly */
+                mode = (h || v) ? 0x30 : 0x00;
+        }
+        return em28xx_write_reg_bits(dev, EM28XX_R26_COMPR, mode, 0x30);
+}
+
+/* FIXME: this only function read values from dev */
+int em28xx_resolution_set(struct em28xx *dev)
+{
+        int width, height;
+        width = norm_maxw(dev);
+        height = norm_maxh(dev);
+
+        /* Properly setup VBI */
+        dev->vbi_width = 720;
+        if (dev->norm & V4L2_STD_525_60)
+                dev->vbi_height = 12;
+        else
+                dev->vbi_height = 18;
+
+        em28xx_set_outfmt(dev);
+
+        em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
+
+        /* If we don't set the start position to 2 in VBI mode, we end up
+           with line 20/21 being YUYV encoded instead of being in 8-bit
+           greyscale.  The core of the issue is that line 21 (and line 23 for
+           PAL WSS) are inside of active video region, and as a result they
+           get the pixelformatting associated with that area.  So by cropping
+           it out, we end up with the same format as the rest of the VBI
+           region */
+        if (em28xx_vbi_supported(dev) == 1)
+                em28xx_capture_area_set(dev, 0, 2, width >> 2, height >> 2);
+        else
+                em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
+
+        return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
+}
+
+int em28xx_set_alternate(struct em28xx *dev)
+{
+        int errCode, prev_alt = dev->alt;
+        int i;
+        unsigned int min_pkt_size = dev->width * 2 + 4;
+
+        /*
+         * alt = 0 is used only for control messages, so, only values
+         * greater than 0 can be used for streaming.
+         */
+        if (alt && alt < dev->num_alt) {
+                em28xx_coredbg("alternate forced to %d\n", dev->alt);
+                dev->alt = alt;
+                goto set_alt;
+        }
+
+        /* When image size is bigger than a certain value,
+           the frame size should be increased, otherwise, only
+           green screen will be received.
+         */
+        if (dev->width * 2 * dev->height > 720 * 240 * 2)
+                min_pkt_size *= 2;
+
+        for (i = 0; i < dev->num_alt; i++) {
+                /* stop when the selected alt setting offers enough bandwidth */
+                if (dev->alt_max_pkt_size[i] >= min_pkt_size) {
+                        dev->alt = i;
+                        break;
+                /* otherwise make sure that we end up with the maximum bandwidth
+                   because the min_pkt_size equation might be wrong...
+                */
+                } else if (dev->alt_max_pkt_size[i] >
+                           dev->alt_max_pkt_size[dev->alt])
+                        dev->alt = i;
+        }
+
+set_alt:
+        if (dev->alt != prev_alt) {
+                em28xx_coredbg("minimum isoc packet size: %u (alt=%d)\n",
+                                min_pkt_size, dev->alt);
+                dev->max_pkt_size = dev->alt_max_pkt_size[dev->alt];
+                em28xx_coredbg("setting alternate %d with wMaxPacketSize=%u\n",
+                               dev->alt, dev->max_pkt_size);
+                errCode = usb_set_interface(dev->udev, 0, dev->alt);
+                if (errCode < 0) {
+                        em28xx_errdev("cannot change alternate number to %d (error=%i)\n",
+                                        dev->alt, errCode);
+                        return errCode;
+                }
+        }
+        return 0;
+}
+
+int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio)
+{
+        int rc = 0;
+
+        if (!gpio)
+                return rc;
+
+        if (dev->mode != EM28XX_SUSPEND) {
+                em28xx_write_reg(dev, 0x48, 0x00);
+                if (dev->mode == EM28XX_ANALOG_MODE)
+                        em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x67);
+                else
+                        em28xx_write_reg(dev, EM28XX_R12_VINENABLE, 0x37);
+                msleep(6);
+        }
+
+        /* Send GPIO reset sequences specified at board entry */
+        while (gpio->sleep >= 0) {
+                if (gpio->reg >= 0) {
+                        rc = em28xx_write_reg_bits(dev,
+                                                   gpio->reg,
+                                                   gpio->val,
+                                                   gpio->mask);
+                        if (rc < 0)
+                                return rc;
+                }
+                if (gpio->sleep > 0)
+                        msleep(gpio->sleep);
+
+                gpio++;
+        }
+        return rc;
+}
+EXPORT_SYMBOL_GPL(em28xx_gpio_set);
+
+int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode)
+{
+        if (dev->mode == set_mode)
+                return 0;
+
+        if (set_mode == EM28XX_SUSPEND) {
+                dev->mode = set_mode;
+
+                /* FIXME: add suspend support for ac97 */
+
+                return em28xx_gpio_set(dev, dev->board.suspend_gpio);
+        }
+
+        dev->mode = set_mode;
+
+        if (dev->mode == EM28XX_DIGITAL_MODE)
+                return em28xx_gpio_set(dev, dev->board.dvb_gpio);
+        else
+                return em28xx_gpio_set(dev, INPUT(dev->ctl_input)->gpio);
+}
+EXPORT_SYMBOL_GPL(em28xx_set_mode);
+
+/* ------------------------------------------------------------------
+        URB control
+   ------------------------------------------------------------------*/
+
+/*
+ * IRQ callback, called by URB callback
+ */
+static void em28xx_irq_callback(struct urb *urb)
+{
+        struct em28xx *dev = urb->context;
+        int i;
+
+        switch (urb->status) {
+        case 0:             /* success */
+        case -ETIMEDOUT:    /* NAK */
+                break;
+        case -ECONNRESET:   /* kill */
+        case -ENOENT:
+        case -ESHUTDOWN:
+                return;
+        default:            /* error */
+                em28xx_isocdbg("urb completition error %d.\n", urb->status);
+                break;
+        }
+
+        /* Copy data from URB */
+        spin_lock(&dev->slock);
+        dev->isoc_ctl.isoc_copy(dev, urb);
+        spin_unlock(&dev->slock);
+
+        /* Reset urb buffers */
+        for (i = 0; i < urb->number_of_packets; i++) {
+                urb->iso_frame_desc[i].status = 0;
+                urb->iso_frame_desc[i].actual_length = 0;
+        }
+        urb->status = 0;
+
+        urb->status = usb_submit_urb(urb, GFP_ATOMIC);
+        if (urb->status) {
+                em28xx_isocdbg("urb resubmit failed (error=%i)\n",
+                               urb->status);
+        }
+}
+
+/*
+ * Stop and Deallocate URBs
+ */
+void em28xx_uninit_isoc(struct em28xx *dev, enum em28xx_mode mode)
+{
+        struct urb *urb;
+        struct em28xx_usb_isoc_bufs *isoc_bufs;
+        int i;
+
+        em28xx_isocdbg("em28xx: called em28xx_uninit_isoc in mode %d\n", mode);
+
+        if (mode == EM28XX_DIGITAL_MODE)
+                isoc_bufs = &dev->isoc_ctl.digital_bufs;
+        else
+                isoc_bufs = &dev->isoc_ctl.analog_bufs;
+
+        for (i = 0; i < isoc_bufs->num_bufs; i++) {
+                urb = isoc_bufs->urb[i];
+                if (urb) {
+                        if (!irqs_disabled())
+                                usb_kill_urb(urb);
+                        else
+                                usb_unlink_urb(urb);
+
+                        if (isoc_bufs->transfer_buffer[i]) {
+                                usb_free_coherent(dev->udev,
+                                        urb->transfer_buffer_length,
+                                        isoc_bufs->transfer_buffer[i],
+                                        urb->transfer_dma);
+                        }
+                        usb_free_urb(urb);
+                        isoc_bufs->urb[i] = NULL;
+                }
+                isoc_bufs->transfer_buffer[i] = NULL;
+        }
+
+        kfree(isoc_bufs->urb);
+        kfree(isoc_bufs->transfer_buffer);
+
+        isoc_bufs->urb = NULL;
+        isoc_bufs->transfer_buffer = NULL;
+        isoc_bufs->num_bufs = 0;
+
+        em28xx_capture_start(dev, 0);
+}
+EXPORT_SYMBOL_GPL(em28xx_uninit_isoc);
+
+/*
+ * Stop URBs
+ */
+void em28xx_stop_urbs(struct em28xx *dev)
+{
+        int i;
+        struct urb *urb;
+        struct em28xx_usb_isoc_bufs *isoc_bufs = &dev->isoc_ctl.digital_bufs;
+
+        em28xx_isocdbg("em28xx: called em28xx_stop_urbs\n");
+
+        for (i = 0; i < isoc_bufs->num_bufs; i++) {
+                urb = isoc_bufs->urb[i];
+                if (urb) {
+                        if (!irqs_disabled())
+                                usb_kill_urb(urb);
+                        else
+                                usb_unlink_urb(urb);
+                }
+        }
+
+        em28xx_capture_start(dev, 0);
+}
+EXPORT_SYMBOL_GPL(em28xx_stop_urbs);
+
+/*
+ * Allocate URBs
+ */
+int em28xx_alloc_isoc(struct em28xx *dev, enum em28xx_mode mode,
+                      int max_packets, int num_bufs, int max_pkt_size)
+{
+        struct em28xx_usb_isoc_bufs *isoc_bufs;
+        int i;
+        int sb_size, pipe;
+        struct urb *urb;
+        int j, k;
+
+        em28xx_isocdbg("em28xx: called em28xx_alloc_isoc in mode %d\n", mode);
+
+        if (mode == EM28XX_DIGITAL_MODE)
+                isoc_bufs = &dev->isoc_ctl.digital_bufs;
+        else
+                isoc_bufs = &dev->isoc_ctl.analog_bufs;
+
+        /* De-allocates all pending stuff */
+        em28xx_uninit_isoc(dev, mode);
+
+        isoc_bufs->num_bufs = num_bufs;
+
+        isoc_bufs->urb = kzalloc(sizeof(void *)*num_bufs,  GFP_KERNEL);
+        if (!isoc_bufs->urb) {
+                em28xx_errdev("cannot alloc memory for usb buffers\n");
+                return -ENOMEM;
+        }
+
+        isoc_bufs->transfer_buffer = kzalloc(sizeof(void *)*num_bufs,
+                                             GFP_KERNEL);
+        if (!isoc_bufs->transfer_buffer) {
+                em28xx_errdev("cannot allocate memory for usb transfer\n");
+                kfree(isoc_bufs->urb);
+                return -ENOMEM;
+        }
+
+        isoc_bufs->max_pkt_size = max_pkt_size;
+        isoc_bufs->num_packets = max_packets;
+        dev->isoc_ctl.vid_buf = NULL;
+        dev->isoc_ctl.vbi_buf = NULL;
+
+        sb_size = isoc_bufs->num_packets * isoc_bufs->max_pkt_size;
+
+        /* allocate urbs and transfer buffers */
+        for (i = 0; i < isoc_bufs->num_bufs; i++) {
+                urb = usb_alloc_urb(isoc_bufs->num_packets, GFP_KERNEL);
+                if (!urb) {
+                        em28xx_err("cannot alloc isoc_ctl.urb %i\n", i);
+                        em28xx_uninit_isoc(dev, mode);
+                        return -ENOMEM;
+                }
+                isoc_bufs->urb[i] = urb;
+
+                isoc_bufs->transfer_buffer[i] = usb_alloc_coherent(dev->udev,
+                        sb_size, GFP_KERNEL, &urb->transfer_dma);
+                if (!isoc_bufs->transfer_buffer[i]) {
+                        em28xx_err("unable to allocate %i bytes for transfer"
+                                        " buffer %i%s\n",
+                                        sb_size, i,
+                                        in_interrupt() ? " while in int" : "");
+                        em28xx_uninit_isoc(dev, mode);
+                        return -ENOMEM;
+                }
+                memset(isoc_bufs->transfer_buffer[i], 0, sb_size);
+
+                /* FIXME: this is a hack - should be
+                        'desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK'
+                        should also be using 'desc.bInterval'
+                 */
+                pipe = usb_rcvisocpipe(dev->udev,
+                                       mode == EM28XX_ANALOG_MODE ?
+                                       EM28XX_EP_ANALOG : EM28XX_EP_DIGITAL);
+
+                usb_fill_int_urb(urb, dev->udev, pipe,
+                                 isoc_bufs->transfer_buffer[i], sb_size,
+                                 em28xx_irq_callback, dev, 1);
+
+                urb->number_of_packets = isoc_bufs->num_packets;
+                urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+
+                k = 0;
+                for (j = 0; j < isoc_bufs->num_packets; j++) {
+                        urb->iso_frame_desc[j].offset = k;
+                        urb->iso_frame_desc[j].length =
+                                                isoc_bufs->max_pkt_size;
+                        k += isoc_bufs->max_pkt_size;
+                }
+        }
+
+        return 0;
+}
+EXPORT_SYMBOL_GPL(em28xx_alloc_isoc);
+
+/*
+ * Allocate URBs and start IRQ
+ */
+int em28xx_init_isoc(struct em28xx *dev, enum em28xx_mode mode,
+                     int max_packets, int num_bufs, int max_pkt_size,
+                     int (*isoc_copy) (struct em28xx *dev, struct urb *urb))
+{
+        struct em28xx_dmaqueue *dma_q = &dev->vidq;
+        struct em28xx_dmaqueue *vbi_dma_q = &dev->vbiq;
+        struct em28xx_usb_isoc_bufs *isoc_bufs;
+        int i;
+        int rc;
+        int alloc;
+
+        em28xx_isocdbg("em28xx: called em28xx_init_isoc in mode %d\n", mode);
+
+        dev->isoc_ctl.isoc_copy = isoc_copy;
+
+        if (mode == EM28XX_DIGITAL_MODE) {
+                isoc_bufs = &dev->isoc_ctl.digital_bufs;
+                /* no need to free/alloc isoc buffers in digital mode */
+                alloc = 0;
+        } else {
+                isoc_bufs = &dev->isoc_ctl.analog_bufs;
+                alloc = 1;
+        }
+
+        if (alloc) {
+                rc = em28xx_alloc_isoc(dev, mode, max_packets,
+                                       num_bufs, max_pkt_size);
+                if (rc)
+                        return rc;
+        }
+
+        init_waitqueue_head(&dma_q->wq);
+        init_waitqueue_head(&vbi_dma_q->wq);
+
+        em28xx_capture_start(dev, 1);
+
+        /* submit urbs and enables IRQ */
+        for (i = 0; i < isoc_bufs->num_bufs; i++) {
+                rc = usb_submit_urb(isoc_bufs->urb[i], GFP_ATOMIC);
+                if (rc) {
+                        em28xx_err("submit of urb %i failed (error=%i)\n", i,
+                                   rc);
+                        em28xx_uninit_isoc(dev, mode);
+                        return rc;
+                }
+        }
+
+        return 0;
+}
+EXPORT_SYMBOL_GPL(em28xx_init_isoc);
+
+/*
+ * em28xx_wake_i2c()
+ * configure i2c attached devices
+ */
+void em28xx_wake_i2c(struct em28xx *dev)
+{
+        v4l2_device_call_all(&dev->v4l2_dev, 0, core,  reset, 0);
+        v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing,
+                        INPUT(dev->ctl_input)->vmux, 0, 0);
+        v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
+}
+
+/*
+ * Device control list
+ */
+
+static LIST_HEAD(em28xx_devlist);
+static DEFINE_MUTEX(em28xx_devlist_mutex);
+
+/*
+ * Extension interface
+ */
+
+static LIST_HEAD(em28xx_extension_devlist);
+
+int em28xx_register_extension(struct em28xx_ops *ops)
+{
+        struct em28xx *dev = NULL;
+
+        mutex_lock(&em28xx_devlist_mutex);
+        list_add_tail(&ops->next, &em28xx_extension_devlist);
+        list_for_each_entry(dev, &em28xx_devlist, devlist) {
+                ops->init(dev);
+        }
+        mutex_unlock(&em28xx_devlist_mutex);
+        printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
+        return 0;
+}
+EXPORT_SYMBOL(em28xx_register_extension);
+
+void em28xx_unregister_extension(struct em28xx_ops *ops)
+{
+        struct em28xx *dev = NULL;
+
+        mutex_lock(&em28xx_devlist_mutex);
+        list_for_each_entry(dev, &em28xx_devlist, devlist) {
+                ops->fini(dev);
+        }
+        list_del(&ops->next);
+        mutex_unlock(&em28xx_devlist_mutex);
+        printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
+}
+EXPORT_SYMBOL(em28xx_unregister_extension);
+
+void em28xx_init_extension(struct em28xx *dev)
+{
+        const struct em28xx_ops *ops = NULL;
+
+        mutex_lock(&em28xx_devlist_mutex);
+        list_add_tail(&dev->devlist, &em28xx_devlist);
+        list_for_each_entry(ops, &em28xx_extension_devlist, next) {
+                if (ops->init)
+                        ops->init(dev);
+        }
+        mutex_unlock(&em28xx_devlist_mutex);
+}
+
+void em28xx_close_extension(struct em28xx *dev)
+{
+        const struct em28xx_ops *ops = NULL;
+
+        mutex_lock(&em28xx_devlist_mutex);
+        list_for_each_entry(ops, &em28xx_extension_devlist, next) {
+                if (ops->fini)
+                        ops->fini(dev);
+        }
+        list_del(&dev->devlist);
+        mutex_unlock(&em28xx_devlist_mutex);
+}