[media] rename drivers/media/video as .../platform

The remaining drivers are mostly platform drivers. Name the
dir to reflect it.

It makes sense to latter break it into a few other dirs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 514 insertions, 0 deletions

diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c
new file mode 100644
index 000000000000..9bd3caa34a3e
--- /dev/null
+++ b/drivers/media/platform/davinci/vpif.c
@@ -0,0 +1,514 @@
+/*
+ * vpif - Video Port Interface driver
+ * VPIF is a receiver and transmitter for video data. It has two channels(0, 1)
+ * that receiveing video byte stream and two channels(2, 3) for video output.
+ * The hardware supports SDTV, HDTV formats, raw data capture.
+ * Currently, the driver supports NTSC and PAL standards.
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <mach/hardware.h>
+
+#include "vpif.h"
+
+MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver");
+MODULE_LICENSE("GPL");
+
+#define VPIF_CH0_MAX_MODES      (22)
+#define VPIF_CH1_MAX_MODES      (02)
+#define VPIF_CH2_MAX_MODES      (15)
+#define VPIF_CH3_MAX_MODES      (02)
+
+static resource_size_t  res_len;
+static struct resource  *res;
+spinlock_t vpif_lock;
+
+void __iomem *vpif_base;
+struct clk *vpif_clk;
+
+/**
+ * ch_params: video standard configuration parameters for vpif
+ * The table must include all presets from supported subdevices.
+ */
+const struct vpif_channel_config_params ch_params[] = {
+        /* HDTV formats */
+        {
+                .name = "480p59_94",
+                .width = 720,
+                .height = 480,
+                .frm_fmt = 1,
+                .ycmux_mode = 0,
+                .eav2sav = 138-8,
+                .sav2eav = 720,
+                .l1 = 1,
+                .l3 = 43,
+                .l5 = 523,
+                .vsize = 525,
+                .capture_format = 0,
+                .vbi_supported = 0,
+                .hd_sd = 1,
+                .dv_preset = V4L2_DV_480P59_94,
+        },
+        {
+                .name = "576p50",
+                .width = 720,
+                .height = 576,
+                .frm_fmt = 1,
+                .ycmux_mode = 0,
+                .eav2sav = 144-8,
+                .sav2eav = 720,
+                .l1 = 1,
+                .l3 = 45,
+                .l5 = 621,
+                .vsize = 625,
+                .capture_format = 0,
+                .vbi_supported = 0,
+                .hd_sd = 1,
+                .dv_preset = V4L2_DV_576P50,
+        },
+        {
+                .name = "720p50",
+                .width = 1280,
+                .height = 720,
+                .frm_fmt = 1,
+                .ycmux_mode = 0,
+                .eav2sav = 700-8,
+                .sav2eav = 1280,
+                .l1 = 1,
+                .l3 = 26,
+                .l5 = 746,
+                .vsize = 750,
+                .capture_format = 0,
+                .vbi_supported = 0,
+                .hd_sd = 1,
+                .dv_preset = V4L2_DV_720P50,
+        },
+        {
+                .name = "720p60",
+                .width = 1280,
+                .height = 720,
+                .frm_fmt = 1,
+                .ycmux_mode = 0,
+                .eav2sav = 370 - 8,
+                .sav2eav = 1280,
+                .l1 = 1,
+                .l3 = 26,
+                .l5 = 746,
+                .vsize = 750,
+                .capture_format = 0,
+                .vbi_supported = 0,
+                .hd_sd = 1,
+                .dv_preset = V4L2_DV_720P60,
+        },
+        {
+                .name = "1080I50",
+                .width = 1920,
+                .height = 1080,
+                .frm_fmt = 0,
+                .ycmux_mode = 0,
+                .eav2sav = 720 - 8,
+                .sav2eav = 1920,
+                .l1 = 1,
+                .l3 = 21,
+                .l5 = 561,
+                .l7 = 563,
+                .l9 = 584,
+                .l11 = 1124,
+                .vsize = 1125,
+                .capture_format = 0,
+                .vbi_supported = 0,
+                .hd_sd = 1,
+                .dv_preset = V4L2_DV_1080I50,
+        },
+        {
+                .name = "1080I60",
+                .width = 1920,
+                .height = 1080,
+                .frm_fmt = 0,
+                .ycmux_mode = 0,
+                .eav2sav = 280 - 8,
+                .sav2eav = 1920,
+                .l1 = 1,
+                .l3 = 21,
+                .l5 = 561,
+                .l7 = 563,
+                .l9 = 584,
+                .l11 = 1124,
+                .vsize = 1125,
+                .capture_format = 0,
+                .vbi_supported = 0,
+                .hd_sd = 1,
+                .dv_preset = V4L2_DV_1080I60,
+        },
+        {
+                .name = "1080p60",
+                .width = 1920,
+                .height = 1080,
+                .frm_fmt = 1,
+                .ycmux_mode = 0,
+                .eav2sav = 280 - 8,
+                .sav2eav = 1920,
+                .l1 = 1,
+                .l3 = 42,
+                .l5 = 1122,
+                .vsize = 1125,
+                .capture_format = 0,
+                .vbi_supported = 0,
+                .hd_sd = 1,
+                .dv_preset = V4L2_DV_1080P60,
+        },
+
+        /* SDTV formats */
+        {
+                .name = "NTSC_M",
+                .width = 720,
+                .height = 480,
+                .frm_fmt = 0,
+                .ycmux_mode = 1,
+                .eav2sav = 268,
+                .sav2eav = 1440,
+                .l1 = 1,
+                .l3 = 23,
+                .l5 = 263,
+                .l7 = 266,
+                .l9 = 286,
+                .l11 = 525,
+                .vsize = 525,
+                .capture_format = 0,
+                .vbi_supported = 1,
+                .hd_sd = 0,
+                .stdid = V4L2_STD_525_60,
+        },
+        {
+                .name = "PAL_BDGHIK",
+                .width = 720,
+                .height = 576,
+                .frm_fmt = 0,
+                .ycmux_mode = 1,
+                .eav2sav = 280,
+                .sav2eav = 1440,
+                .l1 = 1,
+                .l3 = 23,
+                .l5 = 311,
+                .l7 = 313,
+                .l9 = 336,
+                .l11 = 624,
+                .vsize = 625,
+                .capture_format = 0,
+                .vbi_supported = 1,
+                .hd_sd = 0,
+                .stdid = V4L2_STD_625_50,
+        },
+};
+
+const unsigned int vpif_ch_params_count = ARRAY_SIZE(ch_params);
+
+static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val)
+{
+        if (val)
+                vpif_set_bit(reg, bit);
+        else
+                vpif_clr_bit(reg, bit);
+}
+
+/* This structure is used to keep track of VPIF size register's offsets */
+struct vpif_registers {
+        u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl;
+        u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt;
+        u32 vanc1_size, width_mask, len_mask;
+        u8 max_modes;
+};
+
+static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = {
+        /* Channel0 */
+        {
+                VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01,
+                VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL,
+                VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
+                VPIF_CH0_MAX_MODES,
+        },
+        /* Channel1 */
+        {
+                VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01,
+                VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL,
+                VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
+                VPIF_CH1_MAX_MODES,
+        },
+        /* Channel2 */
+        {
+                VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01,
+                VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL,
+                VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE,
+                VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF,
+                VPIF_CH2_MAX_MODES
+        },
+        /* Channel3 */
+        {
+                VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01,
+                VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL,
+                VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE,
+                VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF,
+                VPIF_CH3_MAX_MODES
+        },
+};
+
+/* vpif_set_mode_info:
+ * This function is used to set horizontal and vertical config parameters
+ * As per the standard in the channel, configure the values of L1, L3,
+ * L5, L7  L9, L11 in VPIF Register , also write width and height
+ */
+static void vpif_set_mode_info(const struct vpif_channel_config_params *config,
+                                u8 channel_id, u8 config_channel_id)
+{
+        u32 value;
+
+        value = (config->eav2sav & vpifregs[config_channel_id].width_mask);
+        value <<= VPIF_CH_LEN_SHIFT;
+        value |= (config->sav2eav & vpifregs[config_channel_id].width_mask);
+        regw(value, vpifregs[channel_id].h_cfg);
+
+        value = (config->l1 & vpifregs[config_channel_id].len_mask);
+        value <<= VPIF_CH_LEN_SHIFT;
+        value |= (config->l3 & vpifregs[config_channel_id].len_mask);
+        regw(value, vpifregs[channel_id].v_cfg_00);
+
+        value = (config->l5 & vpifregs[config_channel_id].len_mask);
+        value <<= VPIF_CH_LEN_SHIFT;
+        value |= (config->l7 & vpifregs[config_channel_id].len_mask);
+        regw(value, vpifregs[channel_id].v_cfg_01);
+
+        value = (config->l9 & vpifregs[config_channel_id].len_mask);
+        value <<= VPIF_CH_LEN_SHIFT;
+        value |= (config->l11 & vpifregs[config_channel_id].len_mask);
+        regw(value, vpifregs[channel_id].v_cfg_02);
+
+        value = (config->vsize & vpifregs[config_channel_id].len_mask);
+        regw(value, vpifregs[channel_id].v_cfg);
+}
+
+/* config_vpif_params
+ * Function to set the parameters of a channel
+ * Mainly modifies the channel ciontrol register
+ * It sets frame format, yc mux mode
+ */
+static void config_vpif_params(struct vpif_params *vpifparams,
+                                u8 channel_id, u8 found)
+{
+        const struct vpif_channel_config_params *config = &vpifparams->std_info;
+        u32 value, ch_nip, reg;
+        u8 start, end;
+        int i;
+
+        start = channel_id;
+        end = channel_id + found;
+
+        for (i = start; i < end; i++) {
+                reg = vpifregs[i].ch_ctrl;
+                if (channel_id < 2)
+                        ch_nip = VPIF_CAPTURE_CH_NIP;
+                else
+                        ch_nip = VPIF_DISPLAY_CH_NIP;
+
+                vpif_wr_bit(reg, ch_nip, config->frm_fmt);
+                vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode);
+                vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT,
+                                        vpifparams->video_params.storage_mode);
+
+                /* Set raster scanning SDR Format */
+                vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT);
+                vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format);
+
+                if (channel_id > 1)     /* Set the Pixel enable bit */
+                        vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT);
+                else if (config->capture_format) {
+                        /* Set the polarity of various pins */
+                        vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT,
+                                        vpifparams->iface.fid_pol);
+                        vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT,
+                                        vpifparams->iface.vd_pol);
+                        vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT,
+                                        vpifparams->iface.hd_pol);
+
+                        value = regr(reg);
+                        /* Set data width */
+                        value &= ~(0x3u <<
+                                        VPIF_CH_DATA_WIDTH_BIT);
+                        value |= ((vpifparams->params.data_sz) <<
+                                                     VPIF_CH_DATA_WIDTH_BIT);
+                        regw(value, reg);
+                }
+
+                /* Write the pitch in the driver */
+                regw((vpifparams->video_params.hpitch),
+                                                vpifregs[i].line_offset);
+        }
+}
+
+/* vpif_set_video_params
+ * This function is used to set video parameters in VPIF register
+ */
+int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id)
+{
+        const struct vpif_channel_config_params *config = &vpifparams->std_info;
+        int found = 1;
+
+        vpif_set_mode_info(config, channel_id, channel_id);
+        if (!config->ycmux_mode) {
+                /* YC are on separate channels (HDTV formats) */
+                vpif_set_mode_info(config, channel_id + 1, channel_id);
+                found = 2;
+        }
+
+        config_vpif_params(vpifparams, channel_id, found);
+
+        regw(0x80, VPIF_REQ_SIZE);
+        regw(0x01, VPIF_EMULATION_CTRL);
+
+        return found;
+}
+EXPORT_SYMBOL(vpif_set_video_params);
+
+void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams,
+                                u8 channel_id)
+{
+        u32 value;
+
+        value = 0x3F8 & (vbiparams->hstart0);
+        value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16);
+        regw(value, vpifregs[channel_id].vanc0_strt);
+
+        value = 0x3F8 & (vbiparams->hstart1);
+        value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16);
+        regw(value, vpifregs[channel_id].vanc1_strt);
+
+        value = 0x3F8 & (vbiparams->hsize0);
+        value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16);
+        regw(value, vpifregs[channel_id].vanc0_size);
+
+        value = 0x3F8 & (vbiparams->hsize1);
+        value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16);
+        regw(value, vpifregs[channel_id].vanc1_size);
+
+}
+EXPORT_SYMBOL(vpif_set_vbi_display_params);
+
+int vpif_channel_getfid(u8 channel_id)
+{
+        return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK)
+                                        >> VPIF_CH_FID_SHIFT;
+}
+EXPORT_SYMBOL(vpif_channel_getfid);
+
+static int __devinit vpif_probe(struct platform_device *pdev)
+{
+        int status = 0;
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res)
+                return -ENOENT;
+
+        res_len = resource_size(res);
+
+        res = request_mem_region(res->start, res_len, res->name);
+        if (!res)
+                return -EBUSY;
+
+        vpif_base = ioremap(res->start, res_len);
+        if (!vpif_base) {
+                status = -EBUSY;
+                goto fail;
+        }
+
+        vpif_clk = clk_get(&pdev->dev, "vpif");
+        if (IS_ERR(vpif_clk)) {
+                status = PTR_ERR(vpif_clk);
+                goto clk_fail;
+        }
+        clk_enable(vpif_clk);
+
+        spin_lock_init(&vpif_lock);
+        dev_info(&pdev->dev, "vpif probe success\n");
+        return 0;
+
+clk_fail:
+        iounmap(vpif_base);
+fail:
+        release_mem_region(res->start, res_len);
+        return status;
+}
+
+static int __devexit vpif_remove(struct platform_device *pdev)
+{
+        if (vpif_clk) {
+                clk_disable(vpif_clk);
+                clk_put(vpif_clk);
+        }
+
+        iounmap(vpif_base);
+        release_mem_region(res->start, res_len);
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static int vpif_suspend(struct device *dev)
+{
+        clk_disable(vpif_clk);
+        return 0;
+}
+
+static int vpif_resume(struct device *dev)
+{
+        clk_enable(vpif_clk);
+        return 0;
+}
+
+static const struct dev_pm_ops vpif_pm = {
+        .suspend        = vpif_suspend,
+        .resume         = vpif_resume,
+};
+
+#define vpif_pm_ops (&vpif_pm)
+#else
+#define vpif_pm_ops NULL
+#endif
+
+static struct platform_driver vpif_driver = {
+        .driver = {
+                .name   = "vpif",
+                .owner = THIS_MODULE,
+                .pm     = vpif_pm_ops,
+        },
+        .remove = __devexit_p(vpif_remove),
+        .probe = vpif_probe,
+};
+
+static void vpif_exit(void)
+{
+        platform_driver_unregister(&vpif_driver);
+}
+
+static int __init vpif_init(void)
+{
+        return platform_driver_register(&vpif_driver);
+}
+subsys_initcall(vpif_init);
+module_exit(vpif_exit);
+