Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 183 insertions, 0 deletions

diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
new file mode 100644
index 000000000000..b3710733b36b
--- /dev/null
+++ b/drivers/input/serio/Kconfig
@@ -0,0 +1,183 @@
+#
+# Input core configuration
+#
+config SERIO
+        tristate "Serial I/O support" if EMBEDDED || !X86
+        default y
+        ---help---
+          Say Yes here if you have any input device that uses serial I/O to
+          communicate with the system. This includes the
+                        * standard AT keyboard and PS/2 mouse *
+          as well as serial mice, Sun keyboards, some joysticks and 6dof
+          devices and more.
+
+          If unsure, say Y.
+
+          To compile this driver as a module, choose M here: the
+          module will be called serio.
+
+if SERIO
+
+config SERIO_I8042
+        tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
+        default y
+        depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K
+        ---help---
+          i8042 is the chip over which the standard AT keyboard and PS/2
+          mouse are connected to the computer. If you use these devices,
+          you'll need to say Y here.
+
+          If unsure, say Y.
+
+          To compile this driver as a module, choose M here: the
+          module will be called i8042.
+
+config SERIO_SERPORT
+        tristate "Serial port line discipline"
+        default y
+        ---help---
+          Say Y here if you plan to use an input device (mouse, joystick,
+          tablet, 6dof) that communicates over the RS232 serial (COM) port.
+
+          More information is available: <file:Documentation/input/input.txt>
+
+          If unsure, say Y.
+
+          To compile this driver as a module, choose M here: the
+          module will be called serport.
+
+config SERIO_CT82C710
+        tristate "ct82c710 Aux port controller"
+        depends on X86
+        ---help---
+          Say Y here if you have a Texas Instruments TravelMate notebook
+          equipped with the ct82c710 chip and want to use a mouse connected
+          to the "QuickPort".
+
+          If unsure, say N.
+
+          To compile this driver as a module, choose M here: the
+          module will be called ct82c710.
+
+config SERIO_Q40KBD
+        tristate "Q40 keyboard controller"
+        depends on Q40
+
+config SERIO_PARKBD
+        tristate "Parallel port keyboard adapter"
+        depends on PARPORT
+        ---help---
+          Say Y here if you built a simple parallel port adapter to attach
+          an additional AT keyboard, XT keyboard or PS/2 mouse.
+
+          More information is available: <file:Documentation/input/input.txt>
+
+          If unsure, say N.
+
+          To compile this driver as a module, choose M here: the
+          module will be called parkbd.
+
+config SERIO_RPCKBD
+        tristate "Acorn RiscPC keyboard controller"
+        depends on ARCH_ACORN || ARCH_CLPS7500
+        default y
+        help
+          Say Y here if you have the Acorn RiscPC and want to use an AT
+          keyboard connected to its keyboard controller.
+
+          To compile this driver as a module, choose M here: the
+          module will be called rpckbd.
+
+config SERIO_AMBAKMI
+        tristate "AMBA KMI keyboard controller"
+        depends on ARM_AMBA
+
+config SERIO_SA1111
+        tristate "Intel SA1111 keyboard controller"
+        depends on SA1111
+
+config SERIO_GSCPS2
+        tristate "HP GSC PS/2 keyboard and PS/2 mouse controller"
+        depends on GSC
+        default y
+        help
+          This driver provides support for the PS/2 ports on PA-RISC machines
+          over which HP PS/2 keyboards and PS/2 mice may be connected.
+          If you use these devices, you'll need to say Y here.
+
+          It's safe to enable this driver, so if unsure, say Y.
+
+          To compile this driver as a module, choose M here: the
+          module will be called gscps2.
+
+config HP_SDC
+        tristate "HP System Device Controller i8042 Support"
+        depends on GSC && SERIO
+        default y
+        ---help---
+          This option enables supports for the the "System Device
+          Controller", an i8042 carrying microcode to manage a
+          few miscellanous devices on some Hewlett Packard systems.
+          The SDC itself contains a 10ms resolution timer/clock capable
+          of delivering interrupts on a periodic and one-shot basis.
+          The SDC may also be connected to a battery-backed real-time
+          clock, a basic audio waveform generator, and an HP-HIL Master
+          Link Controller serving up to seven input devices.
+
+          By itself this option is rather useless, but enabling it will
+          enable selection of drivers for the abovementioned devices.
+          It is, however, incompatible with the old, reliable HIL keyboard
+          driver, and the new HIL driver is experimental, so if you plan
+          to use a HIL keyboard as your primary keyboard, you may wish
+          to keep using that driver until the new HIL drivers have had
+          more testing.
+
+config HIL_MLC
+        tristate "HIL MLC Support (needed for HIL input devices)"
+        depends on HP_SDC
+
+config SERIO_PCIPS2
+        tristate "PCI PS/2 keyboard and PS/2 mouse controller"
+        depends on PCI
+        help
+          Say Y here if you have a Mobility Docking station with PS/2
+          keyboard and mice ports.
+
+          To compile this driver as a module, choose M here: the
+          module will be called pcips2.
+
+config SERIO_MACEPS2
+        tristate "SGI O2 MACE PS/2 controller"
+        depends on SGI_IP32
+        help
+          Say Y here if you have SGI O2 workstation and want to use its
+          PS/2 ports.
+
+          To compile this driver as a module, choose M here: the
+          module will be called maceps2.
+
+config SERIO_LIBPS2
+        tristate "PS/2 driver library" if EMBEDDED
+        help
+          Say Y here if you are using a driver for device connected
+          to a PS/2 port, such as PS/2 mouse or standard AT keyboard.
+
+          To compile this driver as a module, choose M here: the
+          module will be called libps2.
+
+config SERIO_RAW
+        tristate "Raw access to serio ports"
+        help
+          Say Y here if you want to have raw access to serio ports, such as
+          AUX ports on i8042 keyboard controller. Each serio port that is
+          bound to this driver will be accessible via a char device with
+          major 10 and dynamically allocated minor. The driver will try
+          allocating minor 1 (that historically corresponds to /dev/psaux)
+          first. To bind this driver to a serio port use sysfs interface:
+
+              echo -n "serio_raw" > /sys/bus/serio/devices/serioX/driver
+
+          To compile this driver as a module, choose M here: the
+          module will be called serio_raw.
+
+endif