IB/mlx4: Make sure inline data segments don't cross a 64 byte boundary

Inline data segments in send WQEs are not allowed to cross a 64 byte
boundary.  We use inline data segments to hold the UD headers for MLX
QPs (QP0 and QP1).  A send with GRH on QP1 will have a UD header that
is too big to fit in a single inline data segment without crossing a
64 byte boundary, so split the header into two inline data segments.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 39 insertions, 3 deletions

diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 355a31f9c03c..28a08bdd1800 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -192,6 +192,8 @@ static int send_wqe_overhead(enum ib_qp_type type)
         case IB_QPT_GSI:
                 return sizeof (struct mlx4_wqe_ctrl_seg) +
                         ALIGN(MLX4_IB_UD_HEADER_SIZE +
+                              DIV_ROUND_UP(MLX4_IB_UD_HEADER_SIZE,
+                                           MLX4_INLINE_ALIGN) *
                               sizeof (struct mlx4_wqe_inline_seg),
                               sizeof (struct mlx4_wqe_data_seg)) +
                         ALIGN(4 +
@@ -1049,6 +1051,7 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_send_wr *wr,
         u16 pkey;
         int send_size;
         int header_size;
+        int spc;
         int i;
 
         send_size = 0;
@@ -1124,10 +1127,43 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_send_wr *wr,
                 printk("\n");
         }
 
-        inl->byte_count = cpu_to_be32(1 << 31 | header_size);
-        memcpy(inl + 1, sqp->header_buf, header_size);
+        /*
+         * Inline data segments may not cross a 64 byte boundary.  If
+         * our UD header is bigger than the space available up to the
+         * next 64 byte boundary in the WQE, use two inline data
+         * segments to hold the UD header.
+         */
+        spc = MLX4_INLINE_ALIGN -
+                ((unsigned long) (inl + 1) & (MLX4_INLINE_ALIGN - 1));
+        if (header_size <= spc) {
+                inl->byte_count = cpu_to_be32(1 << 31 | header_size);
+                memcpy(inl + 1, sqp->header_buf, header_size);
+                i = 1;
+        } else {
+                inl->byte_count = cpu_to_be32(1 << 31 | spc);
+                memcpy(inl + 1, sqp->header_buf, spc);
+
+                inl = (void *) (inl + 1) + spc;
+                memcpy(inl + 1, sqp->header_buf + spc, header_size - spc);
+                /*
+                 * Need a barrier here to make sure all the data is
+                 * visible before the byte_count field is set.
+                 * Otherwise the HCA prefetcher could grab the 64-byte
+                 * chunk with this inline segment and get a valid (!=
+                 * 0xffffffff) byte count but stale data, and end up
+                 * generating a packet with bad headers.
+                 *
+                 * The first inline segment's byte_count field doesn't
+                 * need a barrier, because it comes after a
+                 * control/MLX segment and therefore is at an offset
+                 * of 16 mod 64.
+                 */
+                wmb();
+                inl->byte_count = cpu_to_be32(1 << 31 | (header_size - spc));
+                i = 2;
+        }
 
-        return ALIGN(sizeof (struct mlx4_wqe_inline_seg) + header_size, 16);
+        return ALIGN(i * sizeof (struct mlx4_wqe_inline_seg) + header_size, 16);
 }
 
 static int mlx4_wq_overflow(struct mlx4_ib_wq *wq, int nreq, struct ib_cq *ib_cq)