IB/ipath: enable GPIO interrupt on HT-460

This is required for even semi-decent performance on OpenIB.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 19 insertions, 2 deletions

diff --git a/drivers/infiniband/hw/ipath/ipath_ht400.c b/drivers/infiniband/hw/ipath/ipath_ht400.c
index 4652435998f3..fac0a2b74de2 100644
--- a/drivers/infiniband/hw/ipath/ipath_ht400.c
+++ b/drivers/infiniband/hw/ipath/ipath_ht400.c
@@ -607,7 +607,12 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
         case 4:         /* Ponderosa is one of the bringup boards */
                 n = "Ponderosa";
                 break;
-        case 5:         /* HT-460 original production board */
+        case 5:
+                /*
+                 * HT-460 original production board; two production levels, with
+                 * different serial number ranges.   See ipath_ht_early_init() for
+                 * case where we enable IPATH_GPIO_INTR for later serial # range.
+                 */
                 n = "InfiniPath_HT-460";
                 break;
         case 6:
@@ -642,7 +647,7 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
         if (n)
                 snprintf(name, namelen, "%s", n);
 
-        if (dd->ipath_majrev != 3 || dd->ipath_minrev != 2) {
+        if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 || dd->ipath_minrev > 3)) {
                 /*
                  * This version of the driver only supports the HT-400
                  * Rev 3.2
@@ -1520,6 +1525,18 @@ static int ipath_ht_early_init(struct ipath_devdata *dd)
          */
         ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
                          INFINIPATH_S_ABORT);
+
+        ipath_get_eeprom_info(dd);
+        if(dd->ipath_boardrev == 5 && dd->ipath_serial[0] == '1' &&
+                dd->ipath_serial[1] == '2' && dd->ipath_serial[2] == '8') {
+                /*
+                 * Later production HT-460 has same changes as HT-465, so
+                 * can use GPIO interrupts.  They have serial #'s starting
+                 * with 128, rather than 112.
+                 */
+                dd->ipath_flags |= IPATH_GPIO_INTR;
+                dd->ipath_flags &= ~IPATH_POLL_RX_INTR;
+        }
         return 0;
 }