ide: include PCI device name in messages from IDE PCI host drivers

While at it:

* Apply small fixes to messages (s/dma/DMA/, remove trailing '.', etc).

* Fix printk() call in ide_setup_pci_baseregs() to use KERN_INFO.

* Move printk() call from ide_pci_clear_simplex() to the caller.

* Cleanup do_ide_setup_pci_device() a bit.

* amd74xx.c: remove superfluous PCI device revision information.

* hpt366.c: fix two printk() calls in ->init_chipset to use KERN_INFO.

* pdc202xx_new.c: fix printk() call in ->init_chipset to use KERN_INFO.

* pdc202xx_old.c: fix driver message in pdc202xx_init_one().

* via82cxxx.c: fix driver warning message in via_init_one().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 files changed, 131 insertions, 99 deletions

diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index a91f2e873ba4..2b118f80fab6 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -129,9 +129,9 @@ static void __devinit amd7411_cable_detect(struct pci_dev *dev,
         amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
         for (i = 24; i >= 0; i -= 8)
                 if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
-                        printk(KERN_WARNING "%s: BIOS didn't set cable bits "
-                                            "correctly. Enabling workaround.\n",
-                                            name);
+                        printk(KERN_WARNING "%s %s: BIOS didn't set cable bits "
+                                "correctly. Enabling workaround.\n",
+                                name, pci_name(dev));
                         amd_80w |= (1 << (1 - (i >> 4)));
                 }
 }
@@ -280,9 +280,8 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_
                         d.udma_mask = ATA_UDMA5;
         }
 
-        printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
-                         d.name, pci_name(dev), dev->revision,
-                         amd_dma[fls(d.udma_mask) - 1]);
+        printk(KERN_INFO "%s %s: UDMA%s controller\n",
+                d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);
 
         /*
         * Determine the system bus clock.
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 81fc171f8ffc..e034e21af7fe 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -134,8 +134,8 @@ static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_devi
                 u16 command;
                 pci_read_config_word(dev, PCI_COMMAND, &command);
                 if (!(command & PCI_COMMAND_IO)) {
-                        printk(KERN_INFO "Skipping disabled %s IDE "
-                                        "controller.\n", d->name);
+                        printk(KERN_INFO "%s %s: skipping disabled "
+                                "controller\n", d->name, pci_name(dev));
                         goto out;
                 }
         }
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 398808905f94..b8004c331edb 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1044,8 +1044,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
                 if ((temp & 0xFFFFF000) != 0xABCDE000) {
                         int i;
 
-                        printk(KERN_WARNING "%s: no clock data saved by BIOS\n",
-                               name);
+                        printk(KERN_WARNING "%s %s: no clock data saved by "
+                                "BIOS\n", name, pci_name(dev));
 
                         /* Calculate the average value of f_CNT. */
                         for (temp = i = 0; i < 128; i++) {
@@ -1070,8 +1070,9 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
                 else
                         pci_clk = 66;
 
-                printk(KERN_INFO "%s: DPLL base: %d MHz, f_CNT: %d, "
-                       "assuming %d MHz PCI\n", name, dpll_clk, f_cnt, pci_clk);
+                printk(KERN_INFO "%s %s: DPLL base: %d MHz, f_CNT: %d, "
+                        "assuming %d MHz PCI\n", name, pci_name(dev),
+                        dpll_clk, f_cnt, pci_clk);
         } else {
                 u32 itr1 = 0;
 
@@ -1137,7 +1138,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
                 }
 
                 if (info->timings->clock_table[clock] == NULL) {
-                        printk(KERN_ERR "%s: unknown bus timing!\n", name);
+                        printk(KERN_ERR "%s %s: unknown bus timing!\n",
+                                name, pci_name(dev));
                         return -EIO;
                 }
 
@@ -1163,16 +1165,19 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
                                 f_low += adjust >> 1;
                 }
                 if (adjust == 8) {
-                        printk(KERN_ERR "%s: DPLL did not stabilize!\n", name);
+                        printk(KERN_ERR "%s %s: DPLL did not stabilize!\n",
+                                name, pci_name(dev));
                         return -EIO;
                 }
 
-                printk("%s: using %d MHz DPLL clock\n", name, dpll_clk);
+                printk(KERN_INFO "%s %s: using %d MHz DPLL clock\n",
+                        name, pci_name(dev), dpll_clk);
         } else {
                 /* Mark the fact that we're not using the DPLL. */
                 dpll_clk = 0;
 
-                printk("%s: using %d MHz PCI clock\n", name, pci_clk);
+                printk(KERN_INFO "%s %s: using %d MHz PCI clock\n",
+                        name, pci_name(dev), pci_clk);
         }
 
         /* Store the clock frequencies. */
@@ -1357,7 +1362,8 @@ static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
         if (dev2->irq != dev->irq) {
                 /* FIXME: we need a core pci_set_interrupt() */
                 dev2->irq = dev->irq;
-                printk(KERN_INFO "HPT374: PCI config space interrupt fixed\n");
+                printk(KERN_INFO "HPT374 %s: PCI config space interrupt "
+                        "fixed\n", pci_name(dev2));
         }
 }
 
@@ -1392,8 +1398,8 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
         pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
 
         if (pin1 != pin2 && dev->irq == dev2->irq) {
-                printk(KERN_INFO "HPT36x: onboard version of chipset, "
-                                 "pin1=%d pin2=%d\n", pin1, pin2);
+                printk(KERN_INFO "HPT36x %s: onboard version of chipset, "
+                        "pin1=%d pin2=%d\n", pci_name(dev), pin1, pin2);
                 return 1;
         }
 
@@ -1591,7 +1597,8 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic
 
         dyn_info = kzalloc(sizeof(*dyn_info) * (dev2 ? 2 : 1), GFP_KERNEL);
         if (dyn_info == NULL) {
-                printk(KERN_ERR "%s: out of memory!\n", d.name);
+                printk(KERN_ERR "%s %s: out of memory!\n",
+                        d.name, pci_name(dev));
                 pci_dev_put(dev2);
                 return -ENOMEM;
         }
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index c5c91f2109d4..4ce5db98f89a 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -569,7 +569,8 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
                 idev->timing10 = 1;
                 hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
                 if (idev->smart == 0)
-                        printk(KERN_WARNING "it821x: Revision 0x10, workarounds activated.\n");
+                        printk(KERN_WARNING "it821x %s: revision 0x10, "
+                                "workarounds activated\n", pci_name(dev));
         }
 
         if (idev->smart == 0) {
@@ -609,11 +610,13 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha
 
         /* Force the card into bypass mode if so requested */
         if (it8212_noraid) {
-                printk(KERN_INFO "it8212: forcing bypass mode.\n");
+                printk(KERN_INFO "it821x %s: forcing bypass mode\n",
+                        pci_name(dev));
                 it8212_disable_raid(dev);
         }
         pci_read_config_byte(dev, 0x50, &conf);
-        printk(KERN_INFO "it821x: controller in %s mode.\n", mode[conf & 1]);
+        printk(KERN_INFO "it821x %s: controller in %s mode\n",
+                pci_name(dev), mode[conf & 1]);
         return 0;
 }
 
@@ -654,7 +657,7 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic
 
         itdevs = kzalloc(2 * sizeof(*itdevs), GFP_KERNEL);
         if (itdevs == NULL) {
-                printk(KERN_ERR "it821x: out of memory\n");
+                printk(KERN_ERR "it821x %s: out of memory\n", pci_name(dev));
                 return -ENOMEM;
         }
 
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 9881a1a8b89c..4c2b669d7de6 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -358,12 +358,13 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
          * registers setting.
          */
         pll_input = detect_pll_input_clock(dma_base);
-        printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000);
+        printk(KERN_INFO "%s %s: PLL input clock is %ld kHz\n",
+                name, pci_name(dev), pll_input / 1000);
 
         /* Sanity check */
         if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) {
-                printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n",
-                       name, pll_input);
+                printk(KERN_ERR "%s %s: Bad PLL input clock %ld Hz, giving up!"
+                        "\n", name, pci_name(dev), pll_input);
                 goto out;
         }
 
@@ -399,7 +400,8 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
                 r = 0x00;
         } else {
                 /* Invalid ratio */
-                printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio);
+                printk(KERN_ERR "%s %s: Bad ratio %ld, giving up!\n",
+                        name, pci_name(dev), ratio);
                 goto out;
         }
 
@@ -409,7 +411,8 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
 
         if (unlikely(f < 0 || f > 127)) {
                 /* Invalid F */
-                printk(KERN_ERR "%s: F[%d] invalid!\n", name, f);
+                printk(KERN_ERR "%s %s: F[%d] invalid!\n",
+                        name, pci_name(dev), f);
                 goto out;
         }
 
@@ -455,8 +458,8 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev)
 
                 if (dev2->irq != dev->irq) {
                         dev2->irq = dev->irq;
-                        printk(KERN_INFO "PDC20270: PCI config space "
-                                         "interrupt fixed\n");
+                        printk(KERN_INFO "PDC20270 %s: PCI config space "
+                                "interrupt fixed\n", pci_name(dev));
                 }
 
                 return dev2;
@@ -535,8 +538,8 @@ static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_de
             bridge->vendor == PCI_VENDOR_ID_INTEL &&
             (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
              bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
-                printk(KERN_INFO "PDC20276: attached to I2O RAID controller, "
-                                 "skipping\n");
+                printk(KERN_INFO "PDC20276 %s: attached to I2O RAID controller,"
+                        " skipping\n", pci_name(dev));
                 return -ENODEV;
         }
 
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 17d99ce273af..5cb2731047e9 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -304,8 +304,8 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
                 if (irq != irq2) {
                         pci_write_config_byte(dev,
                                 (PCI_INTERRUPT_LINE)|0x80, irq);     /* 0xbc */
-                        printk(KERN_INFO "%s: PCI config space interrupt "
-                                         "mirror fixed\n", name);
+                        printk(KERN_INFO "%s %s: PCI config space interrupt "
+                                "mirror fixed\n", name, pci_name(dev));
                 }
         }
 }
@@ -406,8 +406,9 @@ static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_dev
                     bridge->vendor == PCI_VENDOR_ID_INTEL &&
                     (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
                      bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
-                        printk(KERN_INFO "ide: Skipping Promise PDC20265 "
-                                "attached to I2O RAID controller\n");
+                        printk(KERN_INFO "pdc202xx_old %s: skipping Promise "
+                                "PDC20265 attached to I2O RAID controller\n",
+                                pci_name(dev));
                         return -ENODEV;
                 }
         }
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index eca52fede281..1106ff44cdee 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -188,7 +188,8 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
                         pci_read_config_dword(isa_dev, 0x64, &reg);
                         reg &= ~0x00002000; /* disable 600ns interrupt mask */
                         if(!(reg & 0x00004000))
-                                printk(KERN_DEBUG "%s: UDMA not BIOS enabled.\n", name);
+                                printk(KERN_DEBUG "%s %s: UDMA not BIOS "
+                                        "enabled.\n", name, pci_name(dev));
                         reg |=  0x00004000; /* enable UDMA/33 support */
                         pci_write_config_dword(isa_dev, 0x64, reg);
                 }
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index f2e4dac9b719..fc29f1ca503a 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -539,7 +539,8 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
                         { "== 100", "== 133", "== 2X PCI", "DISABLED!" };
 
                 tmp >>= 4;
-                printk(KERN_INFO "%s: BASE CLOCK %s\n", name, clk_str[tmp & 3]);
+                printk(KERN_INFO "%s %s: BASE CLOCK %s\n",
+                        name, pci_name(dev), clk_str[tmp & 3]);
         }
 
         return 0;
@@ -779,8 +780,8 @@ static int __devinit siimage_init_one(struct pci_dev *dev,
                 * seem to get terminally confused in the PCI spaces.
                 */
                 if (!request_mem_region(bar5, barsize, d.name)) {
-                        printk(KERN_WARNING "siimage: IDE controller MMIO "
-                                            "ports not available.\n");
+                        printk(KERN_WARNING "siimage %s: MMIO ports not "
+                                "available\n", pci_name(dev));
                 } else {
                         ioaddr = ioremap(bar5, barsize);
                         if (ioaddr == NULL)
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index f3cf7c6c0cc3..518d8ab413f3 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -380,8 +380,9 @@ static int __devinit sis_find_family(struct pci_dev *dev)
                 }
                 pci_dev_put(host);
 
-                printk(KERN_INFO "SIS5513: %s %s controller\n",
-                         SiSHostChipInfo[i].name, chipset_capability[chipset_family]);
+                printk(KERN_INFO "SIS5513 %s: %s %s controller\n",
+                        pci_name(dev), SiSHostChipInfo[i].name,
+                        chipset_capability[chipset_family]);
         }
 
         if (!chipset_family) { /* Belongs to pci-quirks */
@@ -396,7 +397,8 @@ static int __devinit sis_find_family(struct pci_dev *dev)
                         pci_write_config_dword(dev, 0x54, idemisc);
 
                         if (trueid == 0x5518) {
-                                printk(KERN_INFO "SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller\n");
+                                printk(KERN_INFO "SIS5513 %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n",
+                                        pci_name(dev));
                                 chipset_family = ATA_133;
 
                                 /* Check for 5513 compability mapping
@@ -405,7 +407,8 @@ static int __devinit sis_find_family(struct pci_dev *dev)
                                  */
                                 if ((idemisc & 0x40000000) == 0) {
                                         pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
-                                        printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
+                                        printk(KERN_INFO "SIS5513 %s: Switching to 5513 register mapping\n",
+                                                pci_name(dev));
                                 }
                         }
         }
@@ -429,10 +432,12 @@ static int __devinit sis_find_family(struct pci_dev *dev)
                                 pci_dev_put(lpc_bridge);
 
                                 if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
-                                        printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
+                                        printk(KERN_INFO "SIS5513 %s: SiS 961B MuTIOL IDE UDMA133 controller\n",
+                                                pci_name(dev));
                                         chipset_family = ATA_133a;
                                 } else {
-                                        printk(KERN_INFO "SIS5513: SiS 961 MuTIOL IDE UDMA100 controller\n");
+                                        printk(KERN_INFO "SIS5513 %s: SiS 961 MuTIOL IDE UDMA100 controller\n",
+                                                pci_name(dev));
                                         chipset_family = ATA_100;
                                 }
                         }
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index 449f4de9a702..7bda5ed92e1e 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -245,10 +245,10 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
         u8 reg = 0;
 
         if ((dev->class & 5) && cfg_base)
-                printk(KERN_INFO "TRM290: chip");
+                printk(KERN_INFO "TRM290 %s: chip", pci_name(dev));
         else {
                 cfg_base = 0x3df0;
-                printk(KERN_INFO "TRM290: using default");
+                printk(KERN_INFO "TRM290 %s: using default", pci_name(dev));
         }
         printk(KERN_CONT " config base at 0x%04x\n", cfg_base);
         hwif->config_data = cfg_base;
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 5f07eeb736ab..23332556e616 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -401,20 +401,19 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
          */
         via_config = via_config_find(&isa);
         if (!via_config->id) {
-                printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
+                printk(KERN_WARNING "VP_IDE %s: unknown chipset, skipping\n",
+                        pci_name(dev));
                 return -ENODEV;
         }
 
         /*
          * Print the boot message.
          */
-        printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s "
-                "controller on pci%s\n",
-                via_config->name, isa->revision,
+        printk(KERN_INFO "VP_IDE %s: VIA %s (rev %02x) IDE %sDMA%s\n",
+                pci_name(dev), via_config->name, isa->revision,
                 via_config->udma_mask ? "U" : "MW",
                 via_dma[via_config->udma_mask ?
-                        (fls(via_config->udma_mask) - 1) : 0],
-                pci_name(dev));
+                        (fls(via_config->udma_mask) - 1) : 0]);
 
         pci_dev_put(isa);
 
@@ -454,7 +453,7 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 
         vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
         if (!vdev) {
-                printk(KERN_ERR "VP_IDE: out of memory :(\n");
+                printk(KERN_ERR "VP_IDE %s: out of memory :(\n", pci_name(dev));
                 return -ENOMEM;
         }
 
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 20f0ee004695..d9655aeb013b 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -39,17 +39,18 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name)
         if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
                          (progif & 5) != 5) {
                 if ((progif & 0xa) != 0xa) {
-                        printk(KERN_INFO "%s: device not capable of full "
-                                "native PCI mode\n", name);
+                        printk(KERN_INFO "%s %s: device not capable of full "
+                                "native PCI mode\n", name, pci_name(dev));
                         return -EOPNOTSUPP;
                 }
-                printk("%s: placing both ports into native PCI mode\n", name);
+                printk(KERN_INFO "%s %s: placing both ports into native PCI "
+                        "mode\n", name, pci_name(dev));
                 (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
                 if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
                     (progif & 5) != 5) {
-                        printk(KERN_ERR "%s: rewrite of PROGIF failed, wanted "
-                                "0x%04x, got 0x%04x\n",
-                                name, progif|5, progif);
+                        printk(KERN_ERR "%s %s: rewrite of PROGIF failed, "
+                                "wanted 0x%04x, got 0x%04x\n",
+                                name, pci_name(dev), progif | 5, progif);
                         return -EOPNOTSUPP;
                 }
         }
@@ -57,14 +58,14 @@ static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name)
 }
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-static void ide_pci_clear_simplex(unsigned long dma_base, const char *name)
+static int ide_pci_clear_simplex(unsigned long dma_base, const char *name)
 {
         u8 dma_stat = inb(dma_base + 2);
 
         outb(dma_stat & 0x60, dma_base + 2);
         dma_stat = inb(dma_base + 2);
-        if (dma_stat & 0x80)
-                printk(KERN_INFO "%s: simplex device: DMA forced\n", name);
+
+        return (dma_stat & 0x80) ? 1 : 0;
 }
 
 /**
@@ -91,7 +92,8 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
                 dma_base = pci_resource_start(dev, baridx);
 
                 if (dma_base == 0) {
-                        printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
+                        printk(KERN_ERR "%s %s: DMA base is invalid\n",
+                                d->name, pci_name(dev));
                         return 0;
                 }
         }
@@ -105,13 +107,16 @@ EXPORT_SYMBOL_GPL(ide_pci_dma_base);
 
 int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
 {
+        struct pci_dev *dev = to_pci_dev(hwif->dev);
         u8 dma_stat;
 
         if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
                 goto out;
 
         if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
-                ide_pci_clear_simplex(hwif->dma_base, d->name);
+                if (ide_pci_clear_simplex(hwif->dma_base, d->name))
+                        printk(KERN_INFO "%s %s: simplex device: DMA forced\n",
+                                d->name, pci_name(dev));
                 goto out;
         }
 
@@ -127,7 +132,8 @@ int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
          */
         dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
         if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
-                printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
+                printk(KERN_INFO "%s %s: simplex device: DMA disabled\n",
+                        d->name, pci_name(dev));
                 return -1;
         }
 out:
@@ -149,8 +155,8 @@ int ide_pci_set_master(struct pci_dev *dev, const char *name)
 
                 if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) ||
                     (pcicmd & PCI_COMMAND_MASTER) == 0) {
-                        printk(KERN_ERR "%s: error updating PCICMD on %s\n",
-                                        name, pci_name(dev));
+                        printk(KERN_ERR "%s %s: error updating PCICMD\n",
+                                name, pci_name(dev));
                         return -EIO;
                 }
         }
@@ -162,9 +168,9 @@ EXPORT_SYMBOL_GPL(ide_pci_set_master);
 
 void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d)
 {
-        printk(KERN_INFO "%s: IDE controller (0x%04x:0x%04x rev 0x%02x) at "
-                         " PCI slot %s\n", d->name, dev->vendor, dev->device,
-                         dev->revision, pci_name(dev));
+        printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n",
+                d->name, pci_name(dev),
+                dev->vendor, dev->device, dev->revision);
 }
 EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
 
@@ -189,11 +195,12 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
         if (pci_enable_device(dev)) {
                 ret = pci_enable_device_io(dev);
                 if (ret < 0) {
-                        printk(KERN_WARNING "%s: (ide_setup_pci_device:) "
-                                "Could not enable device.\n", d->name);
+                        printk(KERN_WARNING "%s %s: couldn't enable device\n",
+                                d->name, pci_name(dev));
                         goto out;
                 }
-                printk(KERN_WARNING "%s: BIOS configuration fixed.\n", d->name);
+                printk(KERN_WARNING "%s %s: BIOS configuration fixed\n",
+                        d->name, pci_name(dev));
         }
 
         /*
@@ -203,7 +210,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
          */
         ret = pci_set_dma_mask(dev, DMA_32BIT_MASK);
         if (ret < 0) {
-                printk(KERN_ERR "%s: can't set dma mask\n", d->name);
+                printk(KERN_ERR "%s %s: can't set DMA mask\n",
+                        d->name, pci_name(dev));
                 goto out;
         }
 
@@ -221,7 +229,8 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
 
         ret = pci_request_selected_regions(dev, bars, d->name);
         if (ret < 0)
-                printk(KERN_ERR "%s: can't reserve resources\n", d->name);
+                printk(KERN_ERR "%s %s: can't reserve resources\n",
+                        d->name, pci_name(dev));
 out:
         return ret;
 }
@@ -247,15 +256,18 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d)
          */
         if (ide_setup_pci_baseregs(dev, d->name) ||
             pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) {
-                printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name);
+                printk(KERN_INFO "%s %s: device disabled (BIOS)\n",
+                        d->name, pci_name(dev));
                 return -ENODEV;
         }
         if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) {
-                printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
+                printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+                        d->name, pci_name(dev));
                 return -EIO;
         }
         if (!(pcicmd & PCI_COMMAND_IO)) {
-                printk(KERN_ERR "%s: unable to enable IDE controller\n", d->name);
+                printk(KERN_ERR "%s %s: unable to enable IDE controller\n",
+                        d->name, pci_name(dev));
                 return -ENXIO;
         }
         return 0;
@@ -311,8 +323,9 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
         if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
                 if (ide_pci_check_iomem(dev, d, 2 * port) ||
                     ide_pci_check_iomem(dev, d, 2 * port + 1)) {
-                        printk(KERN_ERR "%s: I/O baseregs (BIOS) are reported "
-                                        "as MEM for port %d!\n", d->name, port);
+                        printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are "
+                                "reported as MEM for port %d!\n",
+                                d->name, pci_name(dev), port);
                         return -EINVAL;
                 }
 
@@ -325,8 +338,8 @@ static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d,
         }
 
         if (!base || !ctl) {
-                printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n",
-                                d->name, port);
+                printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n",
+                        d->name, pci_name(dev), port);
                 return -EINVAL;
         }
 
@@ -414,14 +427,16 @@ static int ide_setup_pci_controller(struct pci_dev *dev,
 
         ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
         if (ret < 0) {
-                printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
+                printk(KERN_ERR "%s %s: error accessing PCI regs\n",
+                        d->name, pci_name(dev));
                 goto out;
         }
         if (!(pcicmd & PCI_COMMAND_IO)) {       /* is device disabled? */
                 ret = ide_pci_configure(dev, d);
                 if (ret < 0)
                         goto out;
-                printk(KERN_INFO "%s: device enabled (Linux)\n", d->name);
+                printk(KERN_INFO "%s %s: device enabled (Linux)\n",
+                        d->name, pci_name(dev));
         }
 
 out:
@@ -460,7 +475,8 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d,
 
                 if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
                     (tmp & e->mask) != e->val)) {
-                        printk(KERN_INFO "%s: IDE port disabled\n", d->name);
+                        printk(KERN_INFO "%s %s: IDE port disabled\n",
+                                d->name, pci_name(dev));
                         continue;       /* port not enabled */
                 }
 
@@ -506,18 +522,15 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
         /* Is it an "IDE storage" device in non-PCI mode? */
         if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) {
                 if (noisy)
-                        printk(KERN_INFO "%s: not 100%% native mode: "
-                                "will probe irqs later\n", d->name);
+                        printk(KERN_INFO "%s %s: not 100%% native mode: will "
+                                "probe irqs later\n", d->name, pci_name(dev));
                 pciirq = ret;
-        } else if (!pciirq) {
-                if (noisy)
-                        printk(KERN_WARNING "%s: bad irq (%d): will probe later\n",
-                                d->name, pciirq);
-                pciirq = 0;
-        } else {
-                if (noisy)
-                        printk(KERN_INFO "%s: 100%% native mode on irq %d\n",
-                                d->name, pciirq);
+        } else if (!pciirq && noisy) {
+                printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n",
+                        d->name, pci_name(dev), pciirq);
+        } else if (noisy) {
+                printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n",
+                        d->name, pci_name(dev), pciirq);
         }
 
         ret = pciirq;