Merge commit 'v2.6.28-rc9' into x86/apic

10 files changed, 40 insertions, 64 deletions

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 6d7401772a8f..e6857e01d1ba 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -669,10 +669,12 @@ config BLK_DEV_CELLEB
 
 endif
 
+# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
 config BLK_DEV_IDE_PMAC
         tristate "PowerMac on-board IDE support"
         depends on PPC_PMAC && IDE=y
         select IDE_TIMINGS
+        select BLK_DEV_IDEDMA_PCI
         help
           This driver provides support for the on-board IDE controller on
           most of the recent Apple Power Macintoshes and PowerBooks.
@@ -689,16 +691,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
           CD-ROM on hda. This option changes this to more natural hda for
           hard disk and hdc for CD-ROM.
 
-config BLK_DEV_IDEDMA_PMAC
-        bool "PowerMac IDE DMA support"
-        depends on BLK_DEV_IDE_PMAC
-        select BLK_DEV_IDEDMA_PCI
-        help
-          This option allows the driver for the on-board IDE controller on
-          Power Macintoshes and PowerBooks to use DMA (direct memory access)
-          to transfer data to and from memory.  Saying Y is safe and improves
-          performance.
-
 config BLK_DEV_IDE_AU1XXX
        bool "IDE for AMD Alchemy Au1200"
        depends on SOC_AU1200
@@ -912,7 +904,7 @@ config BLK_DEV_UMC8672
 endif
 
 config BLK_DEV_IDEDMA
-        def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
+        def_bool BLK_DEV_IDEDMA_SFF || \
                  BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 
 endif # IDE
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index e56c7b72f9e2..45d2356bb725 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -591,7 +591,7 @@ static int __init ali15x3_ide_init(void)
 
 static void __exit ali15x3_ide_exit(void)
 {
-        return pci_unregister_driver(&alim15x3_pci_driver);
+        pci_unregister_driver(&alim15x3_pci_driver);
 }
 
 module_init(ali15x3_ide_init);
diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
index 81ec73134eda..c6bcd3014a29 100644
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -3,7 +3,7 @@
  * IDE driver for Linux.
  *
  * Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
+ * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz
  *
  * Based on the work of:
  *      Andre Hedrick
@@ -263,6 +263,15 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_
                         d.udma_mask = ATA_UDMA5;
         }
 
+        /*
+         * It seems that on some nVidia controllers using AltStatus
+         * register can be unreliable so default to Status register
+         * if the device is in Compatibility Mode.
+         */
+        if (dev->vendor == PCI_VENDOR_ID_NVIDIA &&
+            ide_pci_is_in_compatibility_mode(dev))
+                d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS;
+
         printk(KERN_INFO "%s %s: UDMA%s controller\n",
                 d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);
 
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 2d848010499d..81f70caeb40f 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -419,7 +419,7 @@ static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
         hw->chipset = ide_acorn;
 }
 
-static int __init
+static int __devinit
 icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 {
         void __iomem *base;
@@ -473,7 +473,7 @@ static const struct ide_port_info icside_v6_port_info __initdata = {
         .swdma_mask             = ATA_SWDMA2,
 };
 
-static int __init
+static int __devinit
 icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 {
         void __iomem *ioc_base, *easi_base;
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index cb199c815b53..f50210fe558f 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -444,6 +444,7 @@ static struct pcmcia_device_id ide_ids[] = {
         PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
         PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
         PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
+        PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
         PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, ide_ids);
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 7162d67562af..cc35d6dbd410 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -132,10 +132,14 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
 }
 EXPORT_SYMBOL(ide_end_request);
 
-static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
+static void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
 {
         struct request_pm_state *pm = rq->data;
 
+#ifdef DEBUG_PM
+        printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
+                drive->name, pm->pm_step);
+#endif
         if (drive->media != ide_disk)
                 return;
 
@@ -172,7 +176,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
                 /* Not supported? Switch to next step now. */
                 if (ata_id_flush_enabled(drive->id) == 0 ||
                     (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
-                        ide_complete_power_step(drive, rq, 0, 0);
+                        ide_complete_power_step(drive, rq);
                         return ide_stopped;
                 }
                 if (ata_id_flush_ext_enabled(drive->id))
@@ -191,7 +195,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
                 if (drive->media != ide_disk)
                         pm->pm_step = IDE_PM_RESTORE_DMA;
                 else
-                        ide_complete_power_step(drive, rq, 0, 0);
+                        ide_complete_power_step(drive, rq);
                 return ide_stopped;
         case IDE_PM_IDLE:               /* Resume step 2 (idle) */
                 args->tf.command = ATA_CMD_IDLEIMMEDIATE;
@@ -322,11 +326,8 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
                 }
         } else if (blk_pm_request(rq)) {
                 struct request_pm_state *pm = rq->data;
-#ifdef DEBUG_PM
-                printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n",
-                        drive->name, rq->pm->pm_step, stat, err);
-#endif
-                ide_complete_power_step(drive, rq, stat, err);
+
+                ide_complete_power_step(drive, rq);
                 if (pm->pm_step == IDE_PM_COMPLETED)
                         ide_complete_pm_request(drive, rq);
                 return;
@@ -804,7 +805,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
                         struct request_pm_state *pm = rq->data;
 #ifdef DEBUG_PM
                         printk("%s: start_power_step(step: %d)\n",
-                                drive->name, rq->pm->pm_step);
+                                drive->name, pm->pm_step);
 #endif
                         startstop = ide_start_power_step(drive, rq);
                         if (startstop == ide_stopped &&
@@ -967,14 +968,13 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
         ide_startstop_t startstop;
         int             loops = 0;
 
-        /* for atari only: POSSIBLY BROKEN HERE(?) */
-        ide_get_lock(ide_intr, hwgroup);
-
         /* caller must own ide_lock */
         BUG_ON(!irqs_disabled());
 
         while (!hwgroup->busy) {
                 hwgroup->busy = 1;
+                /* for atari only */
+                ide_get_lock(ide_intr, hwgroup);
                 drive = choose_drive(hwgroup);
                 if (drive == NULL) {
                         int sleeping = 0;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 5d6ba14e211d..c41c3b9b6f02 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -457,18 +457,14 @@ int drive_is_ready (ide_drive_t *drive)
         if (drive->waiting_for_dma)
                 return hwif->dma_ops->dma_test_irq(drive);
 
-#if 0
-        /* need to guarantee 400ns since last command was issued */
-        udelay(1);
-#endif
-
         /*
          * We do a passive status test under shared PCI interrupts on
          * cards that truly share the ATA side interrupt, but may also share
          * an interrupt with another pci card/device.  We make no assumptions
          * about possible isa-pnp and pci-pnp issues yet.
          */
-        if (hwif->io_ports.ctl_addr)
+        if (hwif->io_ports.ctl_addr &&
+            (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0)
                 stat = hwif->tp_ops->read_altstatus(hwif);
         else
                 /* Note: this may clear a pending IRQ!! */
@@ -610,6 +606,7 @@ static const struct drive_list_entry ivb_list[] = {
         { "TSSTcorp CDDVDW SH-S202N"    , "SB01"        },
         { "TSSTcorp CDDVDW SH-S202H"    , "SB00"        },
         { "TSSTcorp CDDVDW SH-S202H"    , "SB01"        },
+        { "SAMSUNG SP0822N"             , "WA100-10"    },
         { NULL                          , NULL          }
 };
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 1649ea54f76c..c55bdbd22314 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -266,7 +266,8 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
         /* take a deep breath */
         msleep(50);
 
-        if (io_ports->ctl_addr) {
+        if (io_ports->ctl_addr &&
+            (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) {
                 a = tp_ops->read_altstatus(hwif);
                 s = tp_ops->read_status(hwif);
                 if ((a ^ s) & ~ATA_IDX)
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 2e19d6298536..7c481bb56fab 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif {
         struct macio_dev                *mdev;
         u32                             timings[4];
         volatile u32 __iomem *          *kauai_fcr;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
         /* Those fields are duplicating what is in hwif. We currently
          * can't use the hwif ones because of some assumptions that are
          * beeing done by the generic code about the kind of dma controller
@@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif {
          */
         volatile struct dbdma_regs __iomem *    dma_regs;
         struct dbdma_cmd*               dma_table_cpu;
-#endif
-        
 } pmac_ide_hwif_t;
 
 enum {
@@ -222,8 +219,6 @@ static const char* model_name[] = {
 #define KAUAI_FCR_UATA_RESET_N          0x00000002
 #define KAUAI_FCR_UATA_ENABLE           0x00000001
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /* Rounded Multiword DMA timings
  * 
  * I gave up finding a generic formula for all controller
@@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
 static void pmac_ide_selectproc(ide_drive_t *drive);
 static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
 
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-
 #define PMAC_IDE_REG(x) \
         ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
 
@@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
         pmac_ide_do_update_timings(drive);
 }
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /*
  * Calculate KeyLargo ATA/66 UDMA timings
  */
@@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
                 drive->name, speed & 0xf,  *timings);
 #endif  
 }
-#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
 
 static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
@@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
         tl[0] = *timings;
         tl[1] = *timings2;
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
         if (speed >= XFER_UDMA_0) {
                 if (pmif->kind == controller_kl_ata4)
                         ret = set_timings_udma_ata4(&tl[0], speed);
@@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
                         ret = -1;
         } else
                 set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
         if (ret)
                 return;
 
@@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_port_info = {
         .chipset                = ide_pmac,
         .tp_ops                 = &pmac_tp_ops,
         .port_ops               = &pmac_ide_port_ops,
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
         .dma_ops                = &pmac_dma_ops,
-#endif
         .host_flags             = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
                                   IDE_HFLAG_POST_SET_MODE |
                                   IDE_HFLAG_MMIO |
@@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
         pmif->regbase = regbase;
         pmif->irq = irq;
         pmif->kauai_fcr = NULL;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+
         if (macio_resource_count(mdev) >= 2) {
                 if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
                         printk(KERN_WARNING "ide-pmac: can't request DMA "
@@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
                         pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
         } else
                 pmif->dma_regs = NULL;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
         dev_set_drvdata(&mdev->ofdev.dev, pmif);
 
         memset(&hw, 0, sizeof(hw));
@@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 
         base = ioremap(rbase, rlen);
         pmif->regbase = (unsigned long) base + 0x2000;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
         pmif->dma_regs = base + 0x1000;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
         pmif->kauai_fcr = base;
         pmif->irq = pdev->irq;
 
@@ -1434,8 +1419,6 @@ out:
         return error;
 }
 
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
 /*
  * pmac_ide_build_dmatable builds the DBDMA command list
  * for a transfer and sets the DBDMA channel to point to it.
@@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
 
         return 0;
 }
-#else
-static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
-                                       const struct ide_port_info *d)
-{
-        return -EOPNOTSUPP;
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
 
 module_init(pmac_ide_probe);
 
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index 7defa0ae2014..a687a7dfea6f 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -550,7 +550,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = {
         .dma_timeout            = ide_dma_timeout,
 };
 
-static const struct ide_port_info sgiioc4_port_info __devinitdata = {
+static const struct ide_port_info sgiioc4_port_info __devinitconst = {
         .name                   = DRV_NAME,
         .chipset                = ide_pci,
         .init_dma               = ide_dma_sgiioc4,
@@ -633,7 +633,7 @@ out:
         return ret;
 }
 
-int
+int __devinit
 ioc4_ide_attach_one(struct ioc4_driver_data *idd)
 {
         /* PCI-RT does not bring out IDE connection.
@@ -645,7 +645,7 @@ ioc4_ide_attach_one(struct ioc4_driver_data *idd)
         return pci_init_sgiioc4(idd->idd_pdev);
 }
 
-static struct ioc4_submodule ioc4_ide_submodule = {
+static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
         .is_name = "IOC4_ide",
         .is_owner = THIS_MODULE,
         .is_probe = ioc4_ide_attach_one,