ide: remove hwif->autodma and drive->autodma

* hpt34x.c: disable DMA masks for HPT345
  (hwif->autodma is zero so DMA won't be enabled anyway).

* trm290.c: disable IDE_HFLAG_TRUST_BIOS_FOR_DMA flag
  (hwif->autodma is zero so DMA won't be enabled anyway).

* Check noautodma global variable instead of drive->autodma in ide_tune_dma().

  This fixes handling of "ide=nodma" kernel parameter for icside, ide-cris,
  au1xxx-ide, pmac, it821x, jmicron, sgiioc4 and siimage host drivers.

* Remove hwif->autodma (it was not checked by IDE core code anyway) and
  drive->autodma (was set by all host drivers - except HPT345/TRM290 special
  cases - unless "ide=nodma" was used).

While at it:
- remove needless printk() from icside.c
- remove stale FIXME/comment from ide-probe.c
- don't force DMA off if PCI bus-mastering had to be enabled in setup-pci.c
  (this setting was always later over-ridden by host drivers anyway)

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 7 deletions

diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index 3e6ed73feb6c..fa8df6d43832 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -133,8 +133,6 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
         u8 reg47 = 0;
         u8 mask = hwif->channel ? 0x01 : 0x02;  /* bit0:Primary */
 
-        hwif->autodma = 0;
-
         if (!hwif->irq)
                 hwif->irq = hwif->channel ? 15 : 14;
 
@@ -157,11 +155,6 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
         if (hwif->cbl != ATA_CBL_PATA40_SHORT)
                 /* bit[0(1)]: 0:80, 1:40 */
                 hwif->cbl = (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-
-        if (!noautodma)
-                hwif->autodma = 1;
-        hwif->drives[0].autodma = hwif->autodma;
-        hwif->drives[1].autodma = hwif->autodma;
 }
 
 static ide_pci_device_t slc90e66_chipset __devinitdata = {