Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux

Pull i2c embedded fixes from Wolfram Sang:
 "The last bunch of (typical) i2c-embedded driver fixes for 3.6.

  Also update the MAINTAINERS file to point to my tree since people keep
  asking where to find their patches."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: algo: pca: Fix mode selection for PCA9665
  MAINTAINERS: fix tree for current i2c-embedded development
  i2c: mxs: correctly setup speed for non devicetree
  i2c: pnx: Fix read transactions of >= 2 bytes
  i2c: pnx: Fix bit definitions

3 files changed, 40 insertions, 32 deletions

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 73133b1063f0..6f5f98d69af7 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -476,17 +476,17 @@ static int pca_init(struct i2c_adapter *adap)
                 /* To avoid integer overflow, use clock/100 for calculations */
                 clock = pca_clock(pca_data) / 100;
 
-                if (pca_data->i2c_clock > 10000) {
+                if (pca_data->i2c_clock > 1000000) {
                         mode = I2C_PCA_MODE_TURBO;
                         min_tlow = 14;
                         min_thi  = 5;
                         raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
-                } else if (pca_data->i2c_clock > 4000) {
+                } else if (pca_data->i2c_clock > 400000) {
                         mode = I2C_PCA_MODE_FASTP;
                         min_tlow = 17;
                         min_thi  = 9;
                         raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
-                } else if (pca_data->i2c_clock > 1000) {
+                } else if (pca_data->i2c_clock > 100000) {
                         mode = I2C_PCA_MODE_FAST;
                         min_tlow = 44;
                         min_thi  = 20;
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 088c5c1ed17d..51f05b8520ed 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -365,10 +365,6 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
         struct device_node *node = dev->of_node;
         int ret;
 
-        if (!node)
-                return -EINVAL;
-
-        i2c->speed = &mxs_i2c_95kHz_config;
         ret = of_property_read_u32(node, "clock-frequency", &speed);
         if (ret)
                 dev_warn(dev, "No I2C speed selected, using 100kHz\n");
@@ -419,10 +415,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
                 return err;
 
         i2c->dev = dev;
+        i2c->speed = &mxs_i2c_95kHz_config;
 
-        err = mxs_i2c_get_ofdata(i2c);
-        if (err)
-                return err;
+        if (dev->of_node) {
+                err = mxs_i2c_get_ofdata(i2c);
+                if (err)
+                        return err;
+        }
 
         platform_set_drvdata(pdev, i2c);
 
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5d54416770b0..8488bddfe465 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -48,8 +48,9 @@ enum {
         mcntrl_afie = 0x00000002,
         mcntrl_naie = 0x00000004,
         mcntrl_drmie = 0x00000008,
-        mcntrl_daie = 0x00000020,
-        mcntrl_rffie = 0x00000040,
+        mcntrl_drsie = 0x00000010,
+        mcntrl_rffie = 0x00000020,
+        mcntrl_daie = 0x00000040,
         mcntrl_tffie = 0x00000080,
         mcntrl_reset = 0x00000100,
         mcntrl_cdbmode = 0x00000400,
@@ -290,31 +291,37 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
          * or we didn't 'ask' for it yet.
          */
         if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
-                dev_dbg(&alg_data->adapter.dev,
-                        "%s(): Write dummy data to fill Rx-fifo...\n",
-                        __func__);
+                /* 'Asking' is done asynchronously, e.g. dummy TX of several
+                 * bytes is done before the first actual RX arrives in FIFO.
+                 * Therefore, ordered bytes (via TX) are counted separately.
+                 */
+                if (alg_data->mif.order) {
+                        dev_dbg(&alg_data->adapter.dev,
+                                "%s(): Write dummy data to fill Rx-fifo...\n",
+                                __func__);
 
-                if (alg_data->mif.len == 1) {
-                        /* Last byte, do not acknowledge next rcv. */
-                        val |= stop_bit;
+                        if (alg_data->mif.order == 1) {
+                                /* Last byte, do not acknowledge next rcv. */
+                                val |= stop_bit;
+
+                                /*
+                                 * Enable interrupt RFDAIE (data in Rx fifo),
+                                 * and disable DRMIE (need data for Tx)
+                                 */
+                                ctl = ioread32(I2C_REG_CTL(alg_data));
+                                ctl |= mcntrl_rffie | mcntrl_daie;
+                                ctl &= ~mcntrl_drmie;
+                                iowrite32(ctl, I2C_REG_CTL(alg_data));
+                        }
 
                         /*
-                         * Enable interrupt RFDAIE (data in Rx fifo),
-                         * and disable DRMIE (need data for Tx)
+                         * Now we'll 'ask' for data:
+                         * For each byte we want to receive, we must
+                         * write a (dummy) byte to the Tx-FIFO.
                          */
-                        ctl = ioread32(I2C_REG_CTL(alg_data));
-                        ctl |= mcntrl_rffie | mcntrl_daie;
-                        ctl &= ~mcntrl_drmie;
-                        iowrite32(ctl, I2C_REG_CTL(alg_data));
+                        iowrite32(val, I2C_REG_TX(alg_data));
+                        alg_data->mif.order--;
                 }
-
-                /*
-                 * Now we'll 'ask' for data:
-                 * For each byte we want to receive, we must
-                 * write a (dummy) byte to the Tx-FIFO.
-                 */
-                iowrite32(val, I2C_REG_TX(alg_data));
-
                 return 0;
         }
 
@@ -514,6 +521,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 
                 alg_data->mif.buf = pmsg->buf;
                 alg_data->mif.len = pmsg->len;
+                alg_data->mif.order = pmsg->len;
                 alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
                         I2C_SMBUS_READ : I2C_SMBUS_WRITE;
                 alg_data->mif.ret = 0;
@@ -566,6 +574,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
         /* Cleanup to be sure... */
         alg_data->mif.buf = NULL;
         alg_data->mif.len = 0;
+        alg_data->mif.order = 0;
 
         dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
                 __func__, ioread32(I2C_REG_STS(alg_data)));