Merge tag 'omap-for-v3.10/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

From Tony Lindgren <tony@atomide.com>:

Clean-up for omap2+ timers from Jon Hunter <jon-hunter@ti.com>:

This series consists mainly of clean-ups for clockevents and
clocksource timers on OMAP2+ devices. The most significant change
in functionality comes from the 5th patch which is changing the
selection of the clocksource timer for OMAP3 and AM335x devices
when gptimers are used for clocksource.

Note that this series depends on 7185684 (ARM: OMAP: use
consistent error checking) in RMK's tree and 960cba6 (ARM:
OMAP5: timer: Update the clocksource name as per clock data)
in omap-for-v3.10/fixes-non-critical. So this branch is based
on a merge of 7185684 and omap-for-v3.10/fixes-non-critical
to avoid non-trivial merge conflicts.

* tag 'omap-for-v3.10/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4+: Fix sparse warning in system timers
  ARM: OMAP2+: Store ID of system timers in timer structure
  ARM: OMAP3: Update clocksource timer selection
  ARM: OMAP2+: Simplify system timers definitions
  ARM: OMAP2+: Simplify system timer clock definitions
  ARM: OMAP2+: Remove hard-coded test on timer ID
  ARM: OMAP2+: Display correct system timer name
  ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
  ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
  ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass
  ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0
  ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag
  ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk
  ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 80 insertions, 23 deletions

diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index b70e3815c459..8f3c947b0029 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -32,6 +32,38 @@
 #define DEV_NAME                        "max77693-muic"
 #define DELAY_MS_DEFAULT                20000           /* unit: millisecond */
 
+/*
+ * Default value of MAX77693 register to bring up MUIC device.
+ * If user don't set some initial value for MUIC device through platform data,
+ * extcon-max77693 driver use 'default_init_data' to bring up base operation
+ * of MAX77693 MUIC device.
+ */
+struct max77693_reg_data default_init_data[] = {
+        {
+                /* STATUS2 - [3]ChgDetRun */
+                .addr = MAX77693_MUIC_REG_STATUS2,
+                .data = STATUS2_CHGDETRUN_MASK,
+        }, {
+                /* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */
+                .addr = MAX77693_MUIC_REG_INTMASK1,
+                .data = INTMASK1_ADC1K_MASK
+                        | INTMASK1_ADC_MASK,
+        }, {
+                /* INTMASK2 - Unmask [0]ChgTypM */
+                .addr = MAX77693_MUIC_REG_INTMASK2,
+                .data = INTMASK2_CHGTYP_MASK,
+        }, {
+                /* INTMASK3 - Mask all of interrupts */
+                .addr = MAX77693_MUIC_REG_INTMASK3,
+                .data = 0x0,
+        }, {
+                /* CDETCTRL2 */
+                .addr = MAX77693_MUIC_REG_CDETCTRL2,
+                .data = CDETCTRL2_VIDRMEN_MASK
+                        | CDETCTRL2_DXOVPEN_MASK,
+        },
+};
+
 enum max77693_muic_adc_debounce_time {
         ADC_DEBOUNCE_TIME_5MS = 0,
         ADC_DEBOUNCE_TIME_10MS,
@@ -1045,8 +1077,9 @@ static int max77693_muic_probe(struct platform_device *pdev)
 {
         struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
         struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
-        struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
         struct max77693_muic_info *info;
+        struct max77693_reg_data *init_data;
+        int num_init_data;
         int delay_jiffies;
         int ret;
         int i;
@@ -1145,15 +1178,25 @@ static int max77693_muic_probe(struct platform_device *pdev)
                 goto err_irq;
         }
 
-        /* Initialize MUIC register by using platform data */
-        for (i = 0 ; i < muic_pdata->num_init_data ; i++) {
-                enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR;
+
+        /* Initialize MUIC register by using platform data or default data */
+        if (pdata->muic_data) {
+                init_data = pdata->muic_data->init_data;
+                num_init_data = pdata->muic_data->num_init_data;
+        } else {
+                init_data = default_init_data;
+                num_init_data = ARRAY_SIZE(default_init_data);
+        }
+
+        for (i = 0 ; i < num_init_data ; i++) {
+                enum max77693_irq_source irq_src
+                                = MAX77693_IRQ_GROUP_NR;
 
                 max77693_write_reg(info->max77693->regmap_muic,
-                                muic_pdata->init_data[i].addr,
-                                muic_pdata->init_data[i].data);
+                                init_data[i].addr,
+                                init_data[i].data);
 
-                switch (muic_pdata->init_data[i].addr) {
+                switch (init_data[i].addr) {
                 case MAX77693_MUIC_REG_INTMASK1:
                         irq_src = MUIC_INT1;
                         break;
@@ -1167,22 +1210,40 @@ static int max77693_muic_probe(struct platform_device *pdev)
 
                 if (irq_src < MAX77693_IRQ_GROUP_NR)
                         info->max77693->irq_masks_cur[irq_src]
-                                = muic_pdata->init_data[i].data;
+                                = init_data[i].data;
         }
 
-        /*
-         * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
-         * h/w path of COMP2/COMN1 on CONTROL1 register.
-         */
-        if (muic_pdata->path_uart)
-                info->path_uart = muic_pdata->path_uart;
-        else
-                info->path_uart = CONTROL1_SW_UART;
+        if (pdata->muic_data) {
+                struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
 
-        if (muic_pdata->path_usb)
-                info->path_usb = muic_pdata->path_usb;
-        else
+                /*
+                 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+                 * h/w path of COMP2/COMN1 on CONTROL1 register.
+                 */
+                if (muic_pdata->path_uart)
+                        info->path_uart = muic_pdata->path_uart;
+                else
+                        info->path_uart = CONTROL1_SW_UART;
+
+                if (muic_pdata->path_usb)
+                        info->path_usb = muic_pdata->path_usb;
+                else
+                        info->path_usb = CONTROL1_SW_USB;
+
+                /*
+                 * Default delay time for detecting cable state
+                 * after certain time.
+                 */
+                if (muic_pdata->detcable_delay_ms)
+                        delay_jiffies =
+                                msecs_to_jiffies(muic_pdata->detcable_delay_ms);
+                else
+                        delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+        } else {
                 info->path_usb = CONTROL1_SW_USB;
+                info->path_uart = CONTROL1_SW_UART;
+                delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+        }
 
         /* Set initial path for UART */
          max77693_muic_set_path(info, info->path_uart, true);
@@ -1208,10 +1269,6 @@ static int max77693_muic_probe(struct platform_device *pdev)
          * driver should notify cable state to upper layer.
          */
         INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq);
-        if (muic_pdata->detcable_delay_ms)
-                delay_jiffies = msecs_to_jiffies(muic_pdata->detcable_delay_ms);
-        else
-                delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
         schedule_delayed_work(&info->wq_detcable, delay_jiffies);
 
         return ret;