dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding

For most devices the FIFO configuration is the same i.e. when half FIFO size is
available/filled, a source/destination request is serviced. But USART devices
have to do it when there is enough space/data available to perform a single
AHB access so the ASAP configuration.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 21 insertions, 4 deletions

diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 6db5228f4134..b7050a46bd87 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -14,6 +14,7 @@
  * found on AT91SAM9263.
  */
 
+#include <dt-bindings/dma/at91.h>
 #include <linux/clk.h>
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
@@ -1320,15 +1321,31 @@ static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
         atslave = devm_kzalloc(&dmac_pdev->dev, sizeof(*atslave), GFP_KERNEL);
         if (!atslave)
                 return NULL;
+
+        atslave->cfg = ATC_DST_H2SEL_HW | ATC_SRC_H2SEL_HW;
         /*
          * We can fill both SRC_PER and DST_PER, one of these fields will be
          * ignored depending on DMA transfer direction.
          */
-        per_id = dma_spec->args[1];
-        atslave->cfg = ATC_FIFOCFG_HALFFIFO
-                     | ATC_DST_H2SEL_HW | ATC_SRC_H2SEL_HW
-                     | ATC_DST_PER_MSB(per_id) | ATC_DST_PER(per_id)
+        per_id = dma_spec->args[1] & AT91_DMA_CFG_PER_ID_MASK;
+        atslave->cfg |= ATC_DST_PER_MSB(per_id) | ATC_DST_PER(per_id)
                      | ATC_SRC_PER_MSB(per_id) | ATC_SRC_PER(per_id);
+        /*
+         * We have to translate the value we get from the device tree since
+         * the half FIFO configuration value had to be 0 to keep backward
+         * compatibility.
+         */
+        switch (dma_spec->args[1] & AT91_DMA_CFG_FIFOCFG_MASK) {
+        case AT91_DMA_CFG_FIFOCFG_ALAP:
+                atslave->cfg |= ATC_FIFOCFG_LARGESTBURST;
+                break;
+        case AT91_DMA_CFG_FIFOCFG_ASAP:
+                atslave->cfg |= ATC_FIFOCFG_ENOUGHSPACE;
+                break;
+        case AT91_DMA_CFG_FIFOCFG_HALF:
+        default:
+                atslave->cfg |= ATC_FIFOCFG_HALFFIFO;
+        }
         atslave->dma_dev = &dmac_pdev->dev;
 
         chan = dma_request_channel(mask, at_dma_filter, atslave);