Merge tag 'v3.13-rc7' into x86/efi-kexec to resolve conflicts

Conflicts:
	arch/x86/platform/efi/efi.c
	drivers/firmware/efi/Kconfig

Signed-off-by: Ingo Molnar <mingo@kernel.org>

7 files changed, 56 insertions, 17 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index e2903d03180e..c0ed4f273cf2 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -435,6 +435,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
           .driver_data = board_ahci_yes_fbs },                  /* 88se9172 on some Gigabyte */
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3),
           .driver_data = board_ahci_yes_fbs },
+        { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
+          .driver_data = board_ahci_yes_fbs },
 
         /* Promise */
         { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },   /* PDC42819 */
@@ -1236,15 +1238,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         if (rc)
                 return rc;
 
-        /* AHCI controllers often implement SFF compatible interface.
-         * Grab all PCI BARs just in case.
-         */
-        rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
-        if (rc == -EBUSY)
-                pcim_pin_device(pdev);
-        if (rc)
-                return rc;
-
         if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
             (pdev->device == 0x2652 || pdev->device == 0x2653)) {
                 u8 map;
@@ -1261,6 +1254,15 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                 }
         }
 
+        /* AHCI controllers often implement SFF compatible interface.
+         * Grab all PCI BARs just in case.
+         */
+        rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
+        if (rc == -EBUSY)
+                pcim_pin_device(pdev);
+        if (rc)
+                return rc;
+
         hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
         if (!hpriv)
                 return -ENOMEM;
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index ae2d73fe321e..3e23e9941dad 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -113,7 +113,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
         /*
          * set PHY Paremeters, two steps to configure the GPR13,
          * one write for rest of parameters, mask of first write
-         * is 0x07fffffd, and the other one write for setting
+         * is 0x07ffffff, and the other one write for setting
          * the mpll_clk_en.
          */
         regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
@@ -124,6 +124,7 @@ static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
                         | IMX6Q_GPR13_SATA_TX_ATTEN_MASK
                         | IMX6Q_GPR13_SATA_TX_BOOST_MASK
                         | IMX6Q_GPR13_SATA_TX_LVL_MASK
+                        | IMX6Q_GPR13_SATA_MPLL_CLK_EN
                         | IMX6Q_GPR13_SATA_TX_EDGE_RATE
                         , IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
                         | IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index f9554318504f..4b231baceb09 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -329,6 +329,7 @@ static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
 static const struct of_device_id ahci_of_match[] = {
         { .compatible = "snps,spear-ahci", },
         { .compatible = "snps,exynos5440-ahci", },
+        { .compatible = "ibm,476gtr-ahci", },
         {},
 };
 MODULE_DEVICE_TABLE(of, ahci_of_match);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 81a94a3919db..1393a5890ed5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2149,9 +2149,16 @@ static int ata_dev_config_ncq(struct ata_device *dev,
                                     "failed to get NCQ Send/Recv Log Emask 0x%x\n",
                                     err_mask);
                 } else {
+                        u8 *cmds = dev->ncq_send_recv_cmds;
+
                         dev->flags |= ATA_DFLAG_NCQ_SEND_RECV;
-                        memcpy(dev->ncq_send_recv_cmds, ap->sector_buf,
-                                ATA_LOG_NCQ_SEND_RECV_SIZE);
+                        memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE);
+
+                        if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) {
+                                ata_dev_dbg(dev, "disabling queued TRIM support\n");
+                                cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &=
+                                        ~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM;
+                        }
                 }
         }
 
@@ -4156,6 +4163,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
         { "ST3320[68]13AS",     "SD1[5-9]",     ATA_HORKAGE_NONCQ |
                                                 ATA_HORKAGE_FIRMWARE_WARN },
 
+        /* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
+        { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA },
+
         /* Blacklist entries taken from Silicon Image 3124/3132
            Windows driver .inf file - also several Linux problem reports */
         { "HTS541060G9SA00",    "MB3OC60D",     ATA_HORKAGE_NONCQ, },
@@ -4202,6 +4212,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
         { "PIONEER DVD-RW  DVR-212D",   NULL,   ATA_HORKAGE_NOSETXFER },
         { "PIONEER DVD-RW  DVR-216D",   NULL,   ATA_HORKAGE_NOSETXFER },
 
+        /* devices that don't properly handle queued TRIM commands */
+        { "Micron_M500*",               NULL,   ATA_HORKAGE_NO_NCQ_TRIM, },
+        { "Crucial_CT???M500SSD1",      NULL,   ATA_HORKAGE_NO_NCQ_TRIM, },
+
         /* End Marker */
         { }
 };
@@ -6304,10 +6318,9 @@ static void ata_port_detach(struct ata_port *ap)
                 for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
                         ata_tlink_delete(&ap->pmp_link[i]);
         }
-        ata_tport_delete(ap);
-
         /* remove the associated SCSI host */
         scsi_remove_host(ap->scsi_host);
+        ata_tport_delete(ap);
 }
 
 /**
@@ -6520,6 +6533,7 @@ static int __init ata_parse_force_one(char **cur,
                 { "norst",      .lflags         = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
                 { "rstonce",    .lflags         = ATA_LFLAG_RST_ONCE },
                 { "atapi_dmadir", .horkage_on   = ATA_HORKAGE_ATAPI_DMADIR },
+                { "disable",    .horkage_on     = ATA_HORKAGE_DISABLE },
         };
         char *start = *cur, *p = *cur;
         char *id, *val, *endp;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index db6dfcfa3e2e..377eb889f555 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3625,6 +3625,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
                 shost->max_lun = 1;
                 shost->max_channel = 1;
                 shost->max_cmd_len = 16;
+                shost->no_write_same = 1;
 
                 /* Schedule policy is determined by ->qc_defer()
                  * callback and it needs to see every deferred qc.
@@ -3871,6 +3872,27 @@ void ata_scsi_hotplug(struct work_struct *work)
                 return;
         }
 
+        /*
+         * XXX - UGLY HACK
+         *
+         * The block layer suspend/resume path is fundamentally broken due
+         * to freezable kthreads and workqueue and may deadlock if a block
+         * device gets removed while resume is in progress.  I don't know
+         * what the solution is short of removing freezable kthreads and
+         * workqueues altogether.
+         *
+         * The following is an ugly hack to avoid kicking off device
+         * removal while freezer is active.  This is a joke but does avoid
+         * this particular deadlock scenario.
+         *
+         * https://bugzilla.kernel.org/show_bug.cgi?id=62801
+         * http://marc.info/?l=linux-kernel&m=138695698516487
+         */
+#ifdef CONFIG_FREEZER
+        while (pm_freezing)
+                msleep(10);
+#endif
+
         DPRINTK("ENTER\n");
         mutex_lock(&ap->scsi_scan_mutex);
 
diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
index 68f9e3293e9c..88949c6d55dd 100644
--- a/drivers/ata/libata-zpodd.c
+++ b/drivers/ata/libata-zpodd.c
@@ -88,15 +88,13 @@ static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev)
 static bool odd_can_poweroff(struct ata_device *ata_dev)
 {
         acpi_handle handle;
-        acpi_status status;
         struct acpi_device *acpi_dev;
 
         handle = ata_dev_acpi_handle(ata_dev);
         if (!handle)
                 return false;
 
-        status = acpi_bus_get_device(handle, &acpi_dev);
-        if (ACPI_FAILURE(status))
+        if (acpi_bus_get_device(handle, &acpi_dev))
                 return false;
 
         return acpi_device_can_poweroff(acpi_dev);
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index e88690ebfd82..73492dd4a4bc 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -319,6 +319,7 @@ static int cf_init(struct arasan_cf_dev *acdev)
         ret = clk_set_rate(acdev->clk, 166000000);
         if (ret) {
                 dev_warn(acdev->host->dev, "clock set rate failed");
+                clk_disable_unprepare(acdev->clk);
                 return ret;
         }