Merge branch 'master' into upstream-fixes

12 files changed, 183 insertions, 258 deletions

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 328ce8a08426..483269db2c7d 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -119,18 +119,19 @@ enum {
         PIIX_80C_SEC            = (1 << 7) | (1 << 6),
 
         /* controller IDs */
-        piix_pata_33            = 0,    /* PIIX4 at 33Mhz */
-        ich_pata_33             = 1,    /* ICH up to UDMA 33 only */
-        ich_pata_66             = 2,    /* ICH up to 66 Mhz */
-        ich_pata_100            = 3,    /* ICH up to UDMA 100 */
-        ich5_sata               = 5,
-        ich6_sata               = 6,
-        ich6_sata_ahci          = 7,
-        ich6m_sata_ahci         = 8,
-        ich8_sata_ahci          = 9,
-        piix_pata_mwdma         = 10,   /* PIIX3 MWDMA only */
-        tolapai_sata_ahci       = 11,
-        ich9_2port_sata         = 12,
+        piix_pata_mwdma         = 0,    /* PIIX3 MWDMA only */
+        piix_pata_33,                   /* PIIX4 at 33Mhz */
+        ich_pata_33,                    /* ICH up to UDMA 33 only */
+        ich_pata_66,                    /* ICH up to 66 Mhz */
+        ich_pata_100,                   /* ICH up to UDMA 100 */
+        ich5_sata,
+        ich6_sata,
+        ich6_sata_ahci,
+        ich6m_sata_ahci,
+        ich8_sata_ahci,
+        ich8_2port_sata,
+        ich8m_apple_sata_ahci,          /* locks up on second port enable */
+        tolapai_sata_ahci,
 
         /* constants for mapping table */
         P0                      = 0,  /* port 0 */
@@ -239,19 +240,21 @@ static const struct pci_device_id piix_pci_tbl[] = {
         /* SATA Controller 1 IDE (ICH8) */
         { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
         /* SATA Controller 2 IDE (ICH8) */
-        { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+        { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
         /* Mobile SATA Controller IDE (ICH8M) */
         { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+        /* Mobile SATA Controller IDE (ICH8M), Apple */
+        { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata_ahci },
         /* SATA Controller IDE (ICH9) */
         { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
         /* SATA Controller IDE (ICH9) */
-        { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+        { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
         /* SATA Controller IDE (ICH9) */
-        { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+        { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
         /* SATA Controller IDE (ICH9M) */
-        { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+        { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
         /* SATA Controller IDE (ICH9M) */
-        { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+        { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
         /* SATA Controller IDE (ICH9M) */
         { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
         /* SATA Controller IDE (Tolapai) */
@@ -427,7 +430,7 @@ static const struct piix_map_db ich6m_map_db = {
 
 static const struct piix_map_db ich8_map_db = {
         .mask = 0x3,
-        .port_enable = 0x3,
+        .port_enable = 0xf,
         .map = {
                 /* PM   PS   SM   SS       MAP */
                 {  P0,  P2,  P1,  P3 }, /* 00b (hardwired when in AHCI) */
@@ -437,7 +440,7 @@ static const struct piix_map_db ich8_map_db = {
         },
 };
 
-static const struct piix_map_db tolapai_map_db = {
+static const struct piix_map_db ich8_2port_map_db = {
         .mask = 0x3,
         .port_enable = 0x3,
         .map = {
@@ -449,7 +452,19 @@ static const struct piix_map_db tolapai_map_db = {
         },
 };
 
-static const struct piix_map_db ich9_2port_map_db = {
+static const struct piix_map_db ich8m_apple_map_db = {
+        .mask = 0x3,
+        .port_enable = 0x1,
+        .map = {
+                /* PM   PS   SM   SS       MAP */
+                {  P0,  NA,  NA,  NA }, /* 00b */
+                {  RV,  RV,  RV,  RV },
+                {  P0,  P2, IDE, IDE }, /* 10b */
+                {  RV,  RV,  RV,  RV },
+        },
+};
+
+static const struct piix_map_db tolapai_map_db = {
         .mask = 0x3,
         .port_enable = 0x3,
         .map = {
@@ -467,11 +482,21 @@ static const struct piix_map_db *piix_map_db_table[] = {
         [ich6_sata_ahci]        = &ich6_map_db,
         [ich6m_sata_ahci]       = &ich6m_map_db,
         [ich8_sata_ahci]        = &ich8_map_db,
+        [ich8_2port_sata]       = &ich8_2port_map_db,
+        [ich8m_apple_sata_ahci] = &ich8m_apple_map_db,
         [tolapai_sata_ahci]     = &tolapai_map_db,
-        [ich9_2port_sata]       = &ich9_2port_map_db,
 };
 
 static struct ata_port_info piix_port_info[] = {
+        [piix_pata_mwdma] =     /* PIIX3 MWDMA only */
+        {
+                .sht            = &piix_sht,
+                .flags          = PIIX_PATA_FLAGS,
+                .pio_mask       = 0x1f, /* pio0-4 */
+                .mwdma_mask     = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
+                .port_ops       = &piix_pata_ops,
+        },
+
         [piix_pata_33] =        /* PIIX4 at 33MHz */
         {
                 .sht            = &piix_sht,
@@ -565,13 +590,15 @@ static struct ata_port_info piix_port_info[] = {
                 .port_ops       = &piix_sata_ops,
         },
 
-        [piix_pata_mwdma] =     /* PIIX3 MWDMA only */
+        [ich8_2port_sata] =
         {
                 .sht            = &piix_sht,
-                .flags          = PIIX_PATA_FLAGS,
+                .flags          = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
+                                  PIIX_FLAG_AHCI,
                 .pio_mask       = 0x1f, /* pio0-4 */
-                .mwdma_mask     = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
-                .port_ops       = &piix_pata_ops,
+                .mwdma_mask     = 0x07, /* mwdma0-2 */
+                .udma_mask      = ATA_UDMA6,
+                .port_ops       = &piix_sata_ops,
         },
 
         [tolapai_sata_ahci] =
@@ -585,7 +612,7 @@ static struct ata_port_info piix_port_info[] = {
                 .port_ops       = &piix_sata_ops,
         },
 
-        [ich9_2port_sata] =
+        [ich8m_apple_sata_ahci] =
         {
                 .sht            = &piix_sht,
                 .flags          = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
@@ -595,6 +622,7 @@ static struct ata_port_info piix_port_info[] = {
                 .udma_mask      = ATA_UDMA6,
                 .port_ops       = &piix_sata_ops,
         },
+
 };
 
 static struct pci_bits piix_enable_bits[] = {
@@ -974,6 +1002,13 @@ static int piix_broken_suspend(void)
                         },
                 },
                 {
+                        .ident = "SATELLITE U205",
+                        .matches = {
+                                DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+                                DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U205"),
+                        },
+                },
+                {
                         .ident = "Portege M500",
                         .matches = {
                                 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
@@ -1086,12 +1121,12 @@ static int piix_disable_ahci(struct pci_dev *pdev)
         if (!mmio)
                 return -ENOMEM;
 
-        tmp = readl(mmio + AHCI_GLOBAL_CTL);
+        tmp = ioread32(mmio + AHCI_GLOBAL_CTL);
         if (tmp & AHCI_ENABLE) {
                 tmp &= ~AHCI_ENABLE;
-                writel(tmp, mmio + AHCI_GLOBAL_CTL);
+                iowrite32(tmp, mmio + AHCI_GLOBAL_CTL);
 
-                tmp = readl(mmio + AHCI_GLOBAL_CTL);
+                tmp = ioread32(mmio + AHCI_GLOBAL_CTL);
                 if (tmp & AHCI_ENABLE)
                         rc = -EIO;
         }
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 81898036dbca..33f06277b3be 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -30,6 +30,14 @@
  *  Hardware documentation available from http://www.t13.org/ and
  *  http://www.sata-io.org/
  *
+ *  Standards documents from:
+ *      http://www.t13.org (ATA standards, PCI DMA IDE spec)
+ *      http://www.t10.org (SCSI MMC - for ATAPI MMC)
+ *      http://www.sata-io.org (SATA)
+ *      http://www.compactflash.org (CF)
+ *      http://www.qic.org (QIC157 - Tape and DSC)
+ *      http://www.ce-ata.org (CE-ATA: not supported)
+ *
  */
 
 #include <linux/kernel.h>
@@ -2307,8 +2315,10 @@ int ata_dev_configure(struct ata_device *dev)
         }
 
         if ((dev->class == ATA_DEV_ATAPI) &&
-            (atapi_command_packet_set(id) == TYPE_TAPE))
+            (atapi_command_packet_set(id) == TYPE_TAPE)) {
                 dev->max_sectors = ATA_MAX_SECTORS_TAPE;
+                dev->horkage |= ATA_HORKAGE_STUCK_ERR;
+        }
 
         if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
                 dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
@@ -2581,81 +2591,6 @@ void sata_print_link_status(struct ata_link *link)
 }
 
 /**
- *      __sata_phy_reset - Wake/reset a low-level SATA PHY
- *      @ap: SATA port associated with target SATA PHY.
- *
- *      This function issues commands to standard SATA Sxxx
- *      PHY registers, to wake up the phy (and device), and
- *      clear any reset condition.
- *
- *      LOCKING:
- *      PCI/etc. bus probe sem.
- *
- */
-void __sata_phy_reset(struct ata_port *ap)
-{
-        struct ata_link *link = &ap->link;
-        unsigned long timeout = jiffies + (HZ * 5);
-        u32 sstatus;
-
-        if (ap->flags & ATA_FLAG_SATA_RESET) {
-                /* issue phy wake/reset */
-                sata_scr_write_flush(link, SCR_CONTROL, 0x301);
-                /* Couldn't find anything in SATA I/II specs, but
-                 * AHCI-1.1 10.4.2 says at least 1 ms. */
-                mdelay(1);
-        }
-        /* phy wake/clear reset */
-        sata_scr_write_flush(link, SCR_CONTROL, 0x300);
-
-        /* wait for phy to become ready, if necessary */
-        do {
-                msleep(200);
-                sata_scr_read(link, SCR_STATUS, &sstatus);
-                if ((sstatus & 0xf) != 1)
-                        break;
-        } while (time_before(jiffies, timeout));
-
-        /* print link status */
-        sata_print_link_status(link);
-
-        /* TODO: phy layer with polling, timeouts, etc. */
-        if (!ata_link_offline(link))
-                ata_port_probe(ap);
-        else
-                ata_port_disable(ap);
-
-        if (ap->flags & ATA_FLAG_DISABLED)
-                return;
-
-        if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
-                ata_port_disable(ap);
-                return;
-        }
-
-        ap->cbl = ATA_CBL_SATA;
-}
-
-/**
- *      sata_phy_reset - Reset SATA bus.
- *      @ap: SATA port associated with target SATA PHY.
- *
- *      This function resets the SATA bus, and then probes
- *      the bus for devices.
- *
- *      LOCKING:
- *      PCI/etc. bus probe sem.
- *
- */
-void sata_phy_reset(struct ata_port *ap)
-{
-        __sata_phy_reset(ap);
-        if (ap->flags & ATA_FLAG_DISABLED)
-                return;
-        ata_bus_reset(ap);
-}
-
-/**
  *      ata_dev_pair            -       return other device on cable
  *      @adev: device
  *
@@ -5490,11 +5425,19 @@ fsm_start:
                  * let the EH abort the command or reset the device.
                  */
                 if (unlikely(status & (ATA_ERR | ATA_DF))) {
-                        ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device "
-                                        "error, dev_stat 0x%X\n", status);
-                        qc->err_mask |= AC_ERR_HSM;
-                        ap->hsm_task_state = HSM_ST_ERR;
-                        goto fsm_start;
+                        /* Some ATAPI tape drives forget to clear the ERR bit
+                         * when doing the next command (mostly request sense).
+                         * We ignore ERR here to workaround and proceed sending
+                         * the CDB.
+                         */
+                        if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
+                                ata_port_printk(ap, KERN_WARNING,
+                                                "DRQ=1 with device error, "
+                                                "dev_stat 0x%X\n", status);
+                                qc->err_mask |= AC_ERR_HSM;
+                                ap->hsm_task_state = HSM_ST_ERR;
+                                goto fsm_start;
+                        }
                 }
 
                 /* Send the CDB (atapi) or the first data block (ata pio out).
@@ -7653,8 +7596,6 @@ EXPORT_SYMBOL_GPL(ata_dev_disable);
 EXPORT_SYMBOL_GPL(sata_set_spd);
 EXPORT_SYMBOL_GPL(sata_link_debounce);
 EXPORT_SYMBOL_GPL(sata_link_resume);
-EXPORT_SYMBOL_GPL(sata_phy_reset);
-EXPORT_SYMBOL_GPL(__sata_phy_reset);
 EXPORT_SYMBOL_GPL(ata_bus_reset);
 EXPORT_SYMBOL_GPL(ata_std_prereset);
 EXPORT_SYMBOL_GPL(ata_std_softreset);
@@ -7725,7 +7666,6 @@ EXPORT_SYMBOL_GPL(ata_port_desc);
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
 #endif /* CONFIG_PCI */
-EXPORT_SYMBOL_GPL(ata_eng_timeout);
 EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
 EXPORT_SYMBOL_GPL(ata_link_abort);
 EXPORT_SYMBOL_GPL(ata_port_abort);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ed8813b222a0..0dac69db1fdf 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -559,101 +559,6 @@ void ata_port_wait_eh(struct ata_port *ap)
         }
 }
 
-/**
- *      ata_qc_timeout - Handle timeout of queued command
- *      @qc: Command that timed out
- *
- *      Some part of the kernel (currently, only the SCSI layer)
- *      has noticed that the active command on port @ap has not
- *      completed after a specified length of time.  Handle this
- *      condition by disabling DMA (if necessary) and completing
- *      transactions, with error if necessary.
- *
- *      This also handles the case of the "lost interrupt", where
- *      for some reason (possibly hardware bug, possibly driver bug)
- *      an interrupt was not delivered to the driver, even though the
- *      transaction completed successfully.
- *
- *      TODO: kill this function once old EH is gone.
- *
- *      LOCKING:
- *      Inherited from SCSI layer (none, can sleep)
- */
-static void ata_qc_timeout(struct ata_queued_cmd *qc)
-{
-        struct ata_port *ap = qc->ap;
-        u8 host_stat = 0, drv_stat;
-        unsigned long flags;
-
-        DPRINTK("ENTER\n");
-
-        ap->hsm_task_state = HSM_ST_IDLE;
-
-        spin_lock_irqsave(ap->lock, flags);
-
-        switch (qc->tf.protocol) {
-
-        case ATA_PROT_DMA:
-        case ATA_PROT_ATAPI_DMA:
-                host_stat = ap->ops->bmdma_status(ap);
-
-                /* before we do anything else, clear DMA-Start bit */
-                ap->ops->bmdma_stop(qc);
-
-                /* fall through */
-
-        default:
-                ata_altstatus(ap);
-                drv_stat = ata_chk_status(ap);
-
-                /* ack bmdma irq events */
-                ap->ops->irq_clear(ap);
-
-                ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, "
-                               "stat 0x%x host_stat 0x%x\n",
-                               qc->tf.command, drv_stat, host_stat);
-
-                /* complete taskfile transaction */
-                qc->err_mask |= AC_ERR_TIMEOUT;
-                break;
-        }
-
-        spin_unlock_irqrestore(ap->lock, flags);
-
-        ata_eh_qc_complete(qc);
-
-        DPRINTK("EXIT\n");
-}
-
-/**
- *      ata_eng_timeout - Handle timeout of queued command
- *      @ap: Port on which timed-out command is active
- *
- *      Some part of the kernel (currently, only the SCSI layer)
- *      has noticed that the active command on port @ap has not
- *      completed after a specified length of time.  Handle this
- *      condition by disabling DMA (if necessary) and completing
- *      transactions, with error if necessary.
- *
- *      This also handles the case of the "lost interrupt", where
- *      for some reason (possibly hardware bug, possibly driver bug)
- *      an interrupt was not delivered to the driver, even though the
- *      transaction completed successfully.
- *
- *      TODO: kill this function once old EH is gone.
- *
- *      LOCKING:
- *      Inherited from SCSI layer (none, can sleep)
- */
-void ata_eng_timeout(struct ata_port *ap)
-{
-        DPRINTK("ENTER\n");
-
-        ata_qc_timeout(ata_qc_from_tag(ap, ap->link.active_tag));
-
-        DPRINTK("EXIT\n");
-}
-
 static int ata_eh_nr_in_flight(struct ata_port *ap)
 {
         unsigned int tag;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 94144ed50a6b..a883bb03d4c7 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2485,11 +2485,40 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
         if (!using_pio && ata_check_atapi_dma(qc))
                 using_pio = 1;
 
-        /* Some controller variants snoop this value for Packet transfers
-           to do state machine and FIFO management. Thus we want to set it
-           properly, and for DMA where it is effectively meaningless */
+        /* Some controller variants snoop this value for Packet
+         * transfers to do state machine and FIFO management.  Thus we
+         * want to set it properly, and for DMA where it is
+         * effectively meaningless.
+         */
         nbytes = min(qc->nbytes, (unsigned int)63 * 1024);
 
+        /* Most ATAPI devices which honor transfer chunk size don't
+         * behave according to the spec when odd chunk size which
+         * matches the transfer length is specified.  If the number of
+         * bytes to transfer is 2n+1.  According to the spec, what
+         * should happen is to indicate that 2n+1 is going to be
+         * transferred and transfer 2n+2 bytes where the last byte is
+         * padding.
+         *
+         * In practice, this doesn't happen.  ATAPI devices first
+         * indicate and transfer 2n bytes and then indicate and
+         * transfer 2 bytes where the last byte is padding.
+         *
+         * This inconsistency confuses several controllers which
+         * perform PIO using DMA such as Intel AHCIs and sil3124/32.
+         * These controllers use actual number of transferred bytes to
+         * update DMA poitner and transfer of 4n+2 bytes make those
+         * controller push DMA pointer by 4n+4 bytes because SATA data
+         * FISes are aligned to 4 bytes.  This causes data corruption
+         * and buffer overrun.
+         *
+         * Always setting nbytes to even number solves this problem
+         * because then ATAPI devices don't have to split data at 2n
+         * boundaries.
+         */
+        if (nbytes & 0x1)
+                nbytes++;
+
         qc->tf.lbam = (nbytes & 0xFF);
         qc->tf.lbah = (nbytes >> 8);
 
@@ -2869,7 +2898,8 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
                 xlat_func = NULL;
                 if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
                         /* relay SCSI command to ATAPI device */
-                        if (unlikely(scmd->cmd_len > dev->cdb_len))
+                        int len = COMMAND_SIZE(scsi_op);
+                        if (unlikely(len > scmd->cmd_len || len > dev->cdb_len))
                                 goto bad_cdb_len;
 
                         xlat_func = atapi_xlat;
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 364534e7aff4..8caf9afc8b90 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -63,6 +63,9 @@ static int ali_cable_override(struct pci_dev *pdev)
         /* Fujitsu P2000 */
         if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF)
                 return 1;
+        /* Mitac 8317 (Winbook-A) and relatives */
+        if (pdev->subsystem_vendor == 0x1071  && pdev->subsystem_device == 0x8317)
+                return 1;
         /* Systems by DMI */
         if (dmi_check_system(cable_dmi_table))
                 return 1;
@@ -282,6 +285,21 @@ static void ali_lock_sectors(struct ata_device *adev)
         adev->max_sectors = 255;
 }
 
+/**
+ *      ali_check_atapi_dma     -       DMA check for most ALi controllers
+ *      @adev: Device
+ *
+ *      Called to decide whether commands should be sent by DMA or PIO
+ */
+
+static int ali_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+        /* If its not a media command, its not worth it */
+        if (qc->nbytes < 2048)
+                return -EOPNOTSUPP;
+        return 0;
+}
+
 static struct scsi_host_template ali_sht = {
         .module                 = THIS_MODULE,
         .name                   = DRV_NAME,
@@ -378,6 +396,7 @@ static struct ata_port_operations ali_c2_port_ops = {
         .mode_filter    = ata_pci_default_filter,
         .tf_load        = ata_tf_load,
         .tf_read        = ata_tf_read,
+        .check_atapi_dma = ali_check_atapi_dma,
         .check_status   = ata_check_status,
         .exec_command   = ata_exec_command,
         .dev_select     = ata_std_dev_select,
@@ -415,6 +434,7 @@ static struct ata_port_operations ali_c5_port_ops = {
         .mode_filter    = ata_pci_default_filter,
         .tf_load        = ata_tf_load,
         .tf_read        = ata_tf_read,
+        .check_atapi_dma = ali_check_atapi_dma,
         .check_status   = ata_check_status,
         .exec_command   = ata_exec_command,
         .dev_select     = ata_std_dev_select,
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index b5e38426b815..81db405a5445 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1145,13 +1145,13 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
         unsigned short int_status = ATAPI_GET_INT_STATUS(base);
 
         if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON|ULTRA_XFER_ON)) {
-                host_stat = ATA_DMA_ACTIVE;
+                host_stat |= ATA_DMA_ACTIVE;
         }
         if (int_status & (MULTI_DONE_INT|UDMAIN_DONE_INT|UDMAOUT_DONE_INT)) {
-                host_stat = ATA_DMA_INTR;
+                host_stat |= ATA_DMA_INTR;
         }
         if (int_status & (MULTI_TERM_INT|UDMAIN_TERM_INT|UDMAOUT_TERM_INT)) {
-                host_stat = ATA_DMA_ERR;
+                host_stat |= ATA_DMA_ERR;
         }
 
         return host_stat;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 3816b8605e0d..46dc70e0dee7 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -329,7 +329,7 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
         /* Restore state */
         pci_write_config_byte(pdev, 0x5B, scr2);
 
-        if (ata66 & (1 << ap->port_no))
+        if (ata66 & (2 >> ap->port_no))
                 ap->cbl = ATA_CBL_PATA40;
         else
                 ap->cbl = ATA_CBL_PATA80;
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 88ab0e1d353f..4320e7986321 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -75,13 +75,16 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
         struct ata_host *host;
         struct ata_port *ap;
         void __iomem *cmd_addr, *ctl_addr;
+        int irq = 0;
+        irq_handler_t handler = NULL;
 
         if (pnp_port_valid(idev, 0) == 0)
                 return -ENODEV;
 
-        /* FIXME: Should selected polled PIO here not fail */
-        if (pnp_irq_valid(idev, 0) == 0)
-                return -ENODEV;
+        if (pnp_irq_valid(idev, 0)) {
+                irq = pnp_irq(idev, 0);
+                handler = ata_interrupt;
+        }
 
         /* allocate host */
         host = ata_host_alloc(&idev->dev, 1);
@@ -115,7 +118,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
                       (unsigned long long)pnp_port_start(idev, 1));
 
         /* activate */
-        return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0,
+        return ata_host_activate(host, irq, handler, 0,
                                  &isapnp_sht);
 }
 
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 225a7223a726..5b8174d94067 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -80,11 +80,10 @@ static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline)
          *      actually do our cable checking etc. Thankfully we don't need
          *      to do the plumbing for other cases.
          */
-        switch (port_map[port])
-        {
+        switch (port_map[port]) {
         case PORT_PATA0:
-                if (control & (1 << 5))
-                        return 0;
+                if ((control & (1 << 5)) == 0)
+                        return -ENOENT;
                 if (control & (1 << 3)) /* 40/80 pin primary */
                         ap->cbl = ATA_CBL_PATA40;
                 else
@@ -93,7 +92,7 @@ static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline)
         case PORT_PATA1:
                 /* Bit 21 is set if the port is enabled */
                 if ((control5 & (1 << 21)) == 0)
-                        return 0;
+                        return -ENOENT;
                 if (control5 & (1 << 19))       /* 40/80 pin secondary */
                         ap->cbl = ATA_CBL_PATA40;
                 else
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 5c1e9cb59ecb..503245a1eafa 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.7"
+#define DRV_VERSION "0.4.8"
 
 #define SIL680_MMIO_BAR         5
 
@@ -94,34 +94,6 @@ static int sil680_cable_detect(struct ata_port *ap) {
 }
 
 /**
- *      sil680_bus_reset        -       reset the SIL680 bus
- *      @link: ATA link to reset
- *      @deadline: deadline jiffies for the operation
- *
- *      Perform the SIL680 housekeeping when doing an ATA bus reset
- */
-
-static int sil680_bus_reset(struct ata_link *link, unsigned int *classes,
-                            unsigned long deadline)
-{
-        struct ata_port *ap = link->ap;
-        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-        unsigned long addr = sil680_selreg(ap, 0);
-        u8 reset;
-
-        pci_read_config_byte(pdev, addr, &reset);
-        pci_write_config_byte(pdev, addr, reset | 0x03);
-        udelay(25);
-        pci_write_config_byte(pdev, addr, reset);
-        return ata_std_softreset(link, classes, deadline);
-}
-
-static void sil680_error_handler(struct ata_port *ap)
-{
-        ata_bmdma_drive_eh(ap, ata_std_prereset, sil680_bus_reset, NULL, ata_std_postreset);
-}
-
-/**
  *      sil680_set_piomode      -       set initial PIO mode data
  *      @ap: ATA interface
  *      @adev: ATA device
@@ -249,7 +221,7 @@ static struct ata_port_operations sil680_port_ops = {
 
         .freeze         = ata_bmdma_freeze,
         .thaw           = ata_bmdma_thaw,
-        .error_handler  = sil680_error_handler,
+        .error_handler  = ata_bmdma_error_handler,
         .post_internal_cmd = ata_bmdma_post_internal_cmd,
         .cable_detect   = sil680_cable_detect,
 
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 3b5be77e861c..87546d9f1ca0 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -55,6 +55,7 @@ static const struct sis_laptop sis_laptop[] = {
         /* devid, subvendor, subdev */
         { 0x5513, 0x1043, 0x1107 },     /* ASUS A6K */
         { 0x5513, 0x1734, 0x105F },     /* FSC Amilo A1630 */
+        { 0x5513, 0x1071, 0x8640 },     /* EasyNote K5305 */
         /* end marker */
         { 0, }
 };
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 187dcb02c681..96fd5260446d 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -63,6 +63,21 @@ enum {
         SIL24_HOST_BAR          = 0,
         SIL24_PORT_BAR          = 2,
 
+        /* sil24 fetches in chunks of 64bytes.  The first block
+         * contains the PRB and two SGEs.  From the second block, it's
+         * consisted of four SGEs and called SGT.  Calculate the
+         * number of SGTs that fit into one page.
+         */
+        SIL24_PRB_SZ            = sizeof(struct sil24_prb)
+                                  + 2 * sizeof(struct sil24_sge),
+        SIL24_MAX_SGT           = (PAGE_SIZE - SIL24_PRB_SZ)
+                                  / (4 * sizeof(struct sil24_sge)),
+
+        /* This will give us one unused SGEs for ATA.  This extra SGE
+         * will be used to store CDB for ATAPI devices.
+         */
+        SIL24_MAX_SGE           = 4 * SIL24_MAX_SGT + 1,
+
         /*
          * Global controller registers (128 bytes @ BAR0)
          */
@@ -247,13 +262,13 @@ enum {
 
 struct sil24_ata_block {
         struct sil24_prb prb;
-        struct sil24_sge sge[LIBATA_MAX_PRD];
+        struct sil24_sge sge[SIL24_MAX_SGE];
 };
 
 struct sil24_atapi_block {
         struct sil24_prb prb;
         u8 cdb[16];
-        struct sil24_sge sge[LIBATA_MAX_PRD - 1];
+        struct sil24_sge sge[SIL24_MAX_SGE];
 };
 
 union sil24_cmd_block {
@@ -378,7 +393,7 @@ static struct scsi_host_template sil24_sht = {
         .change_queue_depth     = ata_scsi_change_queue_depth,
         .can_queue              = SIL24_MAX_CMDS,
         .this_id                = ATA_SHT_THIS_ID,
-        .sg_tablesize           = LIBATA_MAX_PRD,
+        .sg_tablesize           = SIL24_MAX_SGE,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -1284,6 +1299,7 @@ static void sil24_init_controller(struct ata_host *host)
 
 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+        extern int __MARKER__sil24_cmd_block_is_sized_wrongly;
         static int printed_version;
         struct ata_port_info pi = sil24_port_info[ent->driver_data];
         const struct ata_port_info *ppi[] = { &pi, NULL };
@@ -1292,6 +1308,10 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         int i, rc;
         u32 tmp;
 
+        /* cause link error if sil24_cmd_block is sized wrongly */
+        if (sizeof(union sil24_cmd_block) != PAGE_SIZE)
+                __MARKER__sil24_cmd_block_is_sized_wrongly = 1;
+
         if (!printed_version++)
                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");