Merge commit 'v2.6.31-rc8' into x86/txt

Conflicts:
	arch/x86/kernel/reboot.c
	security/Kconfig

Merge reason: resolve the conflicts, bump up from rc3 to rc8.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 files changed, 171 insertions, 69 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 336eb1ed73cc..fe3eba5d6b3e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -219,6 +219,8 @@ enum {
         AHCI_HFLAG_SECT255              = (1 << 8), /* max 255 sectors */
         AHCI_HFLAG_YES_NCQ              = (1 << 9), /* force NCQ cap on */
         AHCI_HFLAG_NO_SUSPEND           = (1 << 10), /* don't suspend */
+        AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
+                                                        link offline */
 
         /* ap->flags bits */
 
@@ -515,10 +517,14 @@ static const struct pci_device_id ahci_pci_tbl[] = {
         { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
         { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
         { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+        { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
+        { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
         { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
         { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
+        { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
         { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
         { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+        { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
 
         /* JMicron 360/1/3/5/6, match class to avoid IDE function */
         { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -1659,6 +1665,7 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
                              int (*check_ready)(struct ata_link *link))
 {
         struct ata_port *ap = link->ap;
+        struct ahci_host_priv *hpriv = ap->host->private_data;
         const char *reason = NULL;
         unsigned long now, msecs;
         struct ata_taskfile tf;
@@ -1697,12 +1704,21 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 
         /* wait for link to become ready */
         rc = ata_wait_after_reset(link, deadline, check_ready);
-        /* link occupied, -ENODEV too is an error */
-        if (rc) {
+        if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+                /*
+                 * Workaround for cases where link online status can't
+                 * be trusted.  Treat device readiness timeout as link
+                 * offline.
+                 */
+                ata_link_printk(link, KERN_INFO,
+                                "device not ready, treating as offline\n");
+                *class = ATA_DEV_NONE;
+        } else if (rc) {
+                /* link occupied, -ENODEV too is an error */
                 reason = "device not ready";
                 goto fail;
-        }
-        *class = ahci_dev_classify(ap);
+        } else
+                *class = ahci_dev_classify(ap);
 
         DPRINTK("EXIT, class=%u\n", *class);
         return 0;
@@ -1769,7 +1785,8 @@ static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
                 irq_sts = readl(port_mmio + PORT_IRQ_STAT);
                 if (irq_sts & PORT_IRQ_BAD_PMP) {
                         ata_link_printk(link, KERN_WARNING,
-                                        "failed due to HW bug, retry pmp=0\n");
+                                        "applying SB600 PMP SRST workaround "
+                                        "and retrying\n");
                         rc = ahci_do_softreset(link, class, 0, deadline,
                                                ahci_check_ready);
                 }
@@ -2722,6 +2739,56 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
         return !ver || strcmp(ver, dmi->driver_data) < 0;
 }
 
+static bool ahci_broken_online(struct pci_dev *pdev)
+{
+#define ENCODE_BUSDEVFN(bus, slot, func)                        \
+        (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
+        static const struct dmi_system_id sysids[] = {
+                /*
+                 * There are several gigabyte boards which use
+                 * SIMG5723s configured as hardware RAID.  Certain
+                 * 5723 firmware revisions shipped there keep the link
+                 * online but fail to answer properly to SRST or
+                 * IDENTIFY when no device is attached downstream
+                 * causing libata to retry quite a few times leading
+                 * to excessive detection delay.
+                 *
+                 * As these firmwares respond to the second reset try
+                 * with invalid device signature, considering unknown
+                 * sig as offline works around the problem acceptably.
+                 */
+                {
+                        .ident = "EP45-DQ6",
+                        .matches = {
+                                DMI_MATCH(DMI_BOARD_VENDOR,
+                                          "Gigabyte Technology Co., Ltd."),
+                                DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
+                        },
+                        .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
+                },
+                {
+                        .ident = "EP45-DS5",
+                        .matches = {
+                                DMI_MATCH(DMI_BOARD_VENDOR,
+                                          "Gigabyte Technology Co., Ltd."),
+                                DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
+                        },
+                        .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
+                },
+                { }     /* terminate list */
+        };
+#undef ENCODE_BUSDEVFN
+        const struct dmi_system_id *dmi = dmi_first_match(sysids);
+        unsigned int val;
+
+        if (!dmi)
+                return false;
+
+        val = (unsigned long)dmi->driver_data;
+
+        return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
         static int printed_version;
@@ -2837,6 +2904,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                            "BIOS update required for suspend/resume\n");
         }
 
+        if (ahci_broken_online(pdev)) {
+                hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
+                dev_info(&pdev->dev,
+                         "online status unreliable, applying workaround\n");
+        }
+
         /* CAP.NP sometimes indicate the index of the last enabled
          * port, at other times, that of the last possible port, so
          * determining the maximum port number requires looking at
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index d0a14cf2bd74..56b8a3ff1286 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -596,9 +596,12 @@ static const struct ich_laptop ich_laptop[] = {
         { 0x27DF, 0x0005, 0x0280 },     /* ICH7 on Acer 5602WLMi */
         { 0x27DF, 0x1025, 0x0102 },     /* ICH7 on Acer 5602aWLMi */
         { 0x27DF, 0x1025, 0x0110 },     /* ICH7 on Acer 3682WLMi */
+        { 0x27DF, 0x1028, 0x02b0 },     /* ICH7 on unknown Dell */
         { 0x27DF, 0x1043, 0x1267 },     /* ICH7 on Asus W5F */
         { 0x27DF, 0x103C, 0x30A1 },     /* ICH7 on HP Compaq nc2400 */
+        { 0x27DF, 0x103C, 0x361a },     /* ICH7 on unkown HP  */
         { 0x27DF, 0x1071, 0xD221 },     /* ICH7 on Hercules EC-900 */
+        { 0x27DF, 0x152D, 0x0778 },     /* ICH7 on unknown Intel */
         { 0x24CA, 0x1025, 0x0061 },     /* ICH4 on ACER Aspire 2023WLMi */
         { 0x24CA, 0x1025, 0x003d },     /* ICH4 on ACER TM290 */
         { 0x266F, 0x1025, 0x0066 },     /* ICH6 on ACER Aspire 1694WLMi */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2c6aedaef718..072ba5ea138f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1515,6 +1515,7 @@ static int ata_hpa_resize(struct ata_device *dev)
 
                 return rc;
         }
+        dev->n_native_sectors = native_sectors;
 
         /* nothing to do? */
         if (native_sectors <= sectors || !ata_ignore_hpa) {
@@ -4099,6 +4100,7 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
                        unsigned int readid_flags)
 {
         u64 n_sectors = dev->n_sectors;
+        u64 n_native_sectors = dev->n_native_sectors;
         int rc;
 
         if (!ata_dev_enabled(dev))
@@ -4128,16 +4130,30 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
         /* verify n_sectors hasn't changed */
         if (dev->class == ATA_DEV_ATA && n_sectors &&
             dev->n_sectors != n_sectors) {
-                ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
+                ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch "
                                "%llu != %llu\n",
                                (unsigned long long)n_sectors,
                                (unsigned long long)dev->n_sectors);
-
-                /* restore original n_sectors */
-                dev->n_sectors = n_sectors;
-
-                rc = -ENODEV;
-                goto fail;
+                /*
+                 * Something could have caused HPA to be unlocked
+                 * involuntarily.  If n_native_sectors hasn't changed
+                 * and the new size matches it, keep the device.
+                 */
+                if (dev->n_native_sectors == n_native_sectors &&
+                    dev->n_sectors > n_sectors &&
+                    dev->n_sectors == n_native_sectors) {
+                        ata_dev_printk(dev, KERN_WARNING,
+                                       "new n_sectors matches native, probably "
+                                       "late HPA unlock, continuing\n");
+                        /* keep using the old n_sectors */
+                        dev->n_sectors = n_sectors;
+                } else {
+                        /* restore original n_[native]_sectors and fail */
+                        dev->n_native_sectors = n_native_sectors;
+                        dev->n_sectors = n_sectors;
+                        rc = -ENODEV;
+                        goto fail;
+                }
         }
 
         return 0;
@@ -4286,6 +4302,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
         { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
         { "MAXTOR 6L080L4",     "A93.0500",     ATA_HORKAGE_BROKEN_HPA },
 
+        /* this one allows HPA unlocking but fails IOs on the area */
+        { "OCZ-VERTEX",             "1.30",     ATA_HORKAGE_BROKEN_HPA },
+
         /* Devices which report 1 sector over size HPA */
         { "ST340823A",          NULL,           ATA_HORKAGE_HPA_SIZE, },
         { "ST320413A",          NULL,           ATA_HORKAGE_HPA_SIZE, },
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 1a07c061f644..79711b64054b 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2327,7 +2327,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
         struct ata_port *ap = link->ap;
         struct ata_link *slave = ap->slave_link;
         struct ata_eh_context *ehc = &link->eh_context;
-        struct ata_eh_context *sehc = &slave->eh_context;
+        struct ata_eh_context *sehc = slave ? &slave->eh_context : NULL;
         unsigned int *classes = ehc->classes;
         unsigned int lflags = link->flags;
         int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 8561a9f195c1..41c94b1ae493 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -26,9 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 
-#include <mach/at91sam9260_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91sam9260.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -44,65 +42,62 @@ struct at91_ide_info {
         unsigned long mode;
         unsigned int cs;
 
+        struct clk *mck;
+
         void __iomem *ide_addr;
         void __iomem *alt_addr;
 };
 
-const struct ata_timing initial_timing =
+static const struct ata_timing initial_timing =
         {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
 
-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
 {
         unsigned long mul;
 
-    /*
-     * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
-     *     x * (f / 1_000_000_000) =
-     *     x * ((f * 65536) / 1_000_000_000) / 65536 =
-     *     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
-     */
+        /*
+        * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+        *     x * (f / 1_000_000_000) =
+        *     x * ((f * 65536) / 1_000_000_000) / 65536 =
+        *     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+        */
 
-    mul = (mck_hz / 10000) << 16;
-    mul /= 100000;
+        mul = (mck_hz / 10000) << 16;
+        mul /= 100000;
 
-    return (ns * mul + 65536) >> 16;    /* rounding */
+        return (ns * mul + 65536) >> 16;    /* rounding */
 }
 
 static void set_smc_mode(struct at91_ide_info *info)
 {
-    at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
-    return;
+        at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+        return;
 }
 
 static void set_smc_timing(struct device *dev,
                 struct at91_ide_info *info, const struct ata_timing *ata)
 {
-        int read_cycle, write_cycle, active, recover;
-        int nrd_setup, nrd_pulse, nrd_recover;
-        int nwe_setup, nwe_pulse;
+        unsigned long read_cycle, write_cycle, active, recover;
+        unsigned long nrd_setup, nrd_pulse, nrd_recover;
+        unsigned long nwe_setup, nwe_pulse;
 
-        int ncs_write_setup, ncs_write_pulse;
-        int ncs_read_setup, ncs_read_pulse;
+        unsigned long ncs_write_setup, ncs_write_pulse;
+        unsigned long ncs_read_setup, ncs_read_pulse;
 
-        unsigned int mck_hz;
-        struct clk *mck;
+        unsigned long mck_hz;
 
         read_cycle  = ata->cyc8b;
         nrd_setup   = ata->setup;
         nrd_pulse   = ata->act8b;
         nrd_recover = ata->rec8b;
 
-        mck = clk_get(NULL, "mck");
-        BUG_ON(IS_ERR(mck));
-        mck_hz = clk_get_rate(mck);
+        mck_hz = clk_get_rate(info->mck);
 
         read_cycle  = calc_mck_cycles(read_cycle, mck_hz);
         nrd_setup   = calc_mck_cycles(nrd_setup, mck_hz);
         nrd_pulse   = calc_mck_cycles(nrd_pulse, mck_hz);
         nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
 
-        clk_put(mck);
-
         active  = nrd_setup + nrd_pulse;
         recover = read_cycle - active;
 
@@ -121,13 +116,13 @@ static void set_smc_timing(struct device *dev,
         ncs_write_setup = ncs_read_setup;
         ncs_write_pulse = ncs_read_pulse;
 
-        dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n",
+        dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
                         nrd_setup, nrd_pulse, read_cycle);
-        dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n",
+        dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
                         nwe_setup, nwe_pulse, write_cycle);
-        dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n",
+        dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
                         ncs_read_setup, ncs_read_pulse);
-        dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n",
+        dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
                         ncs_write_setup, ncs_write_pulse);
 
         at91_sys_write(AT91_SMC_SETUP(info->cs),
@@ -217,6 +212,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
         struct resource *mem_res;
         struct ata_host *host;
         struct ata_port *ap;
+
         int irq_flags = 0;
         int irq = 0;
         int ret;
@@ -254,13 +250,20 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
                 ata_port_desc(ap, "no IRQ, using PIO polling");
         }
 
-        info = kzalloc(sizeof(*info), GFP_KERNEL);
+        info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
 
         if (!info) {
                 dev_err(dev, "failed to allocate memory for private data\n");
                 return -ENOMEM;
         }
 
+        info->mck = clk_get(NULL, "mck");
+
+        if (IS_ERR(info->mck)) {
+                dev_err(dev, "failed to get access to mck clock\n");
+                return -ENODEV;
+        }
+
         info->cs    = board->chipselect;
         info->mode  = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
                 AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
@@ -272,7 +275,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
         if (!info->ide_addr) {
                 dev_err(dev, "failed to map IO base\n");
                 ret = -ENOMEM;
-                goto err_ide_ioremap;
+                goto err_put;
         }
 
         info->alt_addr = devm_ioremap(dev,
@@ -281,7 +284,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
         if (!info->alt_addr) {
                 dev_err(dev, "failed to map CTL base\n");
                 ret = -ENOMEM;
-                goto err_alt_ioremap;
+                goto err_put;
         }
 
         ap->ioaddr.cmd_addr = info->ide_addr;
@@ -300,12 +303,8 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
                         irq ? ata_sff_interrupt : NULL,
                         irq_flags, &pata_at91_sht);
 
-err_alt_ioremap:
-        devm_iounmap(dev, info->ide_addr);
-
-err_ide_ioremap:
-        kfree(info);
-
+err_put:
+        clk_put(info->mck);
         return ret;
 }
 
@@ -313,7 +312,6 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
 {
         struct ata_host *host = dev_get_drvdata(&pdev->dev);
         struct at91_ide_info *info;
-        struct device *dev = &pdev->dev;
 
         if (!host)
                 return 0;
@@ -324,10 +322,8 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
         if (!info)
                 return 0;
 
-        devm_iounmap(dev, info->ide_addr);
-        devm_iounmap(dev, info->alt_addr);
+        clk_put(info->mck);
 
-        kfree(info);
         return 0;
 }
 
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index bec0b8ade66d..45915566e4e9 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -1,6 +1,7 @@
 /*
  * pata_atiixp.c        - ATI PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
+ *                        (C) 2009 Bartlomiej Zolnierkiewicz
  *
  * Based on
  *
@@ -61,20 +62,19 @@ static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev,
 
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
         int dn = 2 * ap->port_no + adev->devno;
-
-        /* Check this is correct - the order is odd in both drivers */
         int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
-        u16 pio_mode_data, pio_timing_data;
+        u32 pio_timing_data;
+        u16 pio_mode_data;
 
         pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
         pio_mode_data &= ~(0x7 << (4 * dn));
         pio_mode_data |= pio << (4 * dn);
         pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
 
-        pci_read_config_word(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
+        pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
         pio_timing_data &= ~(0xFF << timing_shift);
         pio_timing_data |= (pio_timings[pio] << timing_shift);
-        pci_write_config_word(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
+        pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
 }
 
 /**
@@ -119,16 +119,17 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
                 udma_mode_data |= dma << (4 * dn);
                 pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
         } else {
-                u16 mwdma_timing_data;
-                /* Check this is correct - the order is odd in both drivers */
                 int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
+                u32 mwdma_timing_data;
 
                 dma -= XFER_MW_DMA_0;
 
-                pci_read_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, &mwdma_timing_data);
+                pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+                                      &mwdma_timing_data);
                 mwdma_timing_data &= ~(0xFF << timing_shift);
                 mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
-                pci_write_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, mwdma_timing_data);
+                pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+                                       mwdma_timing_data);
         }
         /*
          *      We must now look at the PIO mode situation. We may need to
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 8d9343accf3c..abdd19fe990a 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -653,7 +653,8 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
 
                 ap = host->ports[i];
                 ocd = ap->dev->platform_data;
-                if (!ap || (ap->flags & ATA_FLAG_DISABLED))
+
+                if (ap->flags & ATA_FLAG_DISABLED)
                         continue;
 
                 ocd = ap->dev->platform_data;
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index f4d009ed50ac..dc99e26f8e5b 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -411,6 +411,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
         PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
         PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
         PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
+        PCMCIA_DEVICE_PROD_ID12("CNF   ", "CD-ROM", 0x46d7db81, 0x66536591),
         PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
         PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
         PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 23714aefb825..c19417e02208 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2514,7 +2514,7 @@ static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
         char *when = "idle";
 
         ata_ehi_clear_desc(ehi);
-        if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+        if (ap->flags & ATA_FLAG_DISABLED) {
                 when = "disabled";
         } else if (edma_was_enabled) {
                 when = "EDMA enabled";
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index b2d11f300c39..86a40582999c 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -602,6 +602,7 @@ MODULE_VERSION(DRV_VERSION);
 
 static int adma_enabled;
 static int swncq_enabled = 1;
+static int msi_enabled;
 
 static void nv_adma_register_mode(struct ata_port *ap)
 {
@@ -2459,6 +2460,11 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         } else if (type == SWNCQ)
                 nv_swncq_host_init(host);
 
+        if (msi_enabled) {
+                dev_printk(KERN_NOTICE, &pdev->dev, "Using MSI\n");
+                pci_enable_msi(pdev);
+        }
+
         pci_set_master(pdev);
         return ata_host_activate(host, pdev->irq, ipriv->irq_handler,
                                  IRQF_SHARED, ipriv->sht);
@@ -2558,4 +2564,6 @@ module_param_named(adma, adma_enabled, bool, 0444);
 MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
 module_param_named(swncq, swncq_enabled, bool, 0444);
 MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
+module_param_named(msi, msi_enabled, bool, 0444);
+MODULE_PARM_DESC(msi, "Enable use of MSI (Default: false)");
 
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 030ec079b184..35bd5cc7f285 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -532,7 +532,7 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance)
                 struct ata_port *ap = host->ports[i];
                 u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2);
 
-                if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
+                if (unlikely(ap->flags & ATA_FLAG_DISABLED))
                         continue;
 
                 /* turn off SATA_IRQ if not supported */